XI to Xi communication( doubt about message interafce)

hi ALL.. AGAIN WE ARE BACK
https communicaion
WITH SOME ISSUE IN File/Idoc - XIA--|Internet|--
XIB - File scenario.
1.at XIA we are using XI Adapter, with HTTPS protocol to post data to XIB server
2.at XIB we are using same XI adapter with HTTP protocol to receive data.
the issue is which message type we shall use for these 2 interfaces.
a) is it possible to export the idoc structure as XSD and use this XSD file as External
Definition at both interfaces at XIA and XIB system...or some standered datatype template is there..
 b) what in case the 2 interface has different message type ?
regards,
ashutosh

Hi all
for connecting XIA & XIB,
at XIA as we are using XI adapter at receiver communication channel..
i am specifying the path as :
http://<host >:<8001>/MessagingSystem/receive/AFW. host = host XIB.
do i require to remove the "receive" in the url... pointed in the below blog by stefan..
XI to XI - XI adapter communication
Regards,
ashutosh

Similar Messages

Doubt about message in SmsAdminUI.log

Hi guys,
I have a doubt about this message error in SmsAdminUI.log occur when I open console SCCM 2012:
[6, PID:18032][DATE 08:13:35] :System.Runtime.InteropServices.COMException\r\n\r\n at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
[1, PID:9828][DATE 11:53:21] :Property: 'Compatible'\r\nSystem.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
My console open normally, any help?
Thanks.

I would not worry about it as long as the console works as expected.
Torsten Meringer | http://www.mssccmfaq.de

Doubt about Message Interface

Hi Experts,
How many message interfaces we have to create per scenario.If it is a synchronous or Asynchronous.One is enough or should we create two
Regards
Khanna

Hi Khannan,
If it is Asynchronous and Synch we need to create two interfaces one outbound interface and one Inbound interface.
Pleas let me know if you have any qureies..!
Thanks and Regards,
Chandu.
Message was edited by:

Doubt About Message Mapping

Hi Experts,
I have to get list of materials from sap r/3 system which starts with some Alphabate. Where can i do it .And how to do it . I think we can do it in Message Mapping. Please let me know the step by step process.
Helpful Ans wi be reward
Regards
Khanna

Hi Michal,
Here i am implementing HTTP TO RFC scenario
i have BAPI BAPI_MATERIAL_GETLIST
i have source structure MaterialNo.And in the receiver side i have BAPI.
Now my question is i want to get the materials which starts with some CA*
How can i achieve this in Message Mapping????????
Please Explain me in detail
Regards
Khanna

I keep getting a community toolbar error message. I am running Yosemite. I have no idea what it is referring to. Any help on how to get rid of it?

I am getting a community toolbar error message on Safari. Does anyone know how to get rid of it? I am running Yosemite. Thank you!

To remove the "Conduit" spyware, take the steps below.
Triple-click the line below on this page to select it:
~/Library/Application Support/Conduit
Copy the selected text to the Clipboard by pressing the key combination command-C. From the Finder menu bar, select
          Go ▹ Go to Folder…
Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
Repeat with these lines:
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin /Applications/Toolbars
You may be prompted for your login password. Next, copy this line:
/Library
Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
          Application Support/Conduit
          InputManagers/CTLoader
          LaunchAgents/com.conduit.loader.agent.plist
          ScriptingAdditions/ct_scripting.osax
Close the Finder windows you opened. Log out and log back in.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Remove any extensions with the word "Conduit" in the description, and any others you don't know you need. If in doubt, remove all of them.

Doubt about how to extend 2LIS_08TRTLP.

hello all!
i have a doubt about 2LIS_08TRTLP extractor. I checked the Estructure Maintenance for this datasource and it has
the follow BW communication structure: MCCOMVTRLK, MCCOMVTRLP, MCCOMVTSP, MCCOMVTTK e MCCOMVTTS. Searching for
field UATBG, i found it in MCCOMVTTK and MCCOMVTTS.
when i try to extend the 2LIS_08TRLP datasource with UATBG field, i just can do this with MCCOMVTTS-UATBG because i
didn´t find the UATBG-MCCOMVTTK in field list. I need MCCOMVTTK-UATBG and not the MCCOMVTTS-UATBG.
what is happening here friends?

Hi,
2LIS_08TRTLP gives the Delivery Item in Shipment. Therefore it mainly deals with the deliveries and the shipment stages. Therefore most of the fields come from the VTTS and LIPS.
IF you need data from VTTK, then you need to use datasource 2LIS_08TRTK.
Also refer sap note 440166. It gives the design using an ODS. Basically, you get to know what are the keys being used for fetching the data from the tables.
Regards.

Doubt about Integration Directory

Hi Expers,
I have one doubt about ID.
What are the objects we can re-use in the IR And ID.
Please let me know.
Regards
Khanna

Hi Rajesh,
With out Developing of the ID Also my Scenario is Working Fine.
Yes it will work, if you are using the same names for message interface, message mapping and interface mapping.
Beacause in ID an Object key is uniquely assigned for each configuration object.
if it already exist then no need to create another.
Check this link for more details.
http://help.sap.com/saphelp_nw04/helpdata/en/7c/7c33419026f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5d/372f41fe21c059e10000000a155106/frameset.htm
Sachin

Doubt about ccm.log error= 0x8004100E

Hello guys,
I have a doubt about when ccm.log display error = 0X8004100E.
So, some my desktops scan by SCCM display error= 0x8004100E but client sccm is installed with sucess. My doubt is what reason display this error?
Maybe can I don't worry about this,but I need know reasons display this messages.
Thanks a lot.

This will be displayed if your site server cannot connect to ccm WMI namespace on the worksation. CCM wmi namespace will only be available if the workstation has ConfigMgr client, hence this will eventualy fail for the workstation that are new to
ConfigMgr. I guess sccm uses this to check if the client is already present or not.
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

Doubt about SMS SITE COMPONENT MANAGER

Please, I'm having doubt about my SMS_SITE_COMPONENT_MANAGER, my print:
Is this a problem or no?How to solve this?In this case not problem how to identify or why display message: Component not Installed by Site Component Manager.
I read this link: http://www.informit.com/articles/article.aspx?p=1926197&seqNum=5 and I have more confusing about this.Thanks.

This is normal. No action is required.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
Thanks Hampson,but in your environment do you have same case? These options are : Component not Installed by Site Component Manager? Thanks.

Doubt about Component binding....

I have a doubt about component binding because I am also using component binding in my application, in my application each page has more than 20 components and each page is session scope, at one point I am getting message like perm space(this is because of lack of memory, actually I have 4gb ram). So my is
"does the jsf creates new object for every reload, because of that my jvm filling with all the objects?".
Another question is "what is the difference between value binding and component bindings?, and drawbacks of each other" please tell me the differences between them up to the very low level(up to memory usage for each approach).
Please clarify this doubt...........

JNaveen wrote:
I have a doubt about component binding because I am also using component binding in my application, in my application each page has more than 20 components and each page is session scope, at one point I am getting message like perm space(this is because of lack of memory, actually I have 4gb ram). So my is
"does the jsf creates new object for every reload, because of that my jvm filling with all the objects?".This is regardless of the component binding. JSF creates a component tree and stores it in the session. With component binding you can link between the backing bean and the component without the need for UIViewRoot#findComponent().
Think your problem lies somewhere else. Use a profiler.
Another question is "what is the difference between value binding and component bindings?, and drawbacks of each other" please tell me the differences between them up to the very low level(up to memory usage for each approach).With the component binding you can get hold of the whole component from the tree in the backing bean. Useful if you want to do a bit more than only holding the component's value, with which you usually do with the value binding.

Doubt about the distribution system

I have a doubt about the distribution system.
We have made a publication and download it and have it in our iPad. The client does not want tosell or that anyone other than its 15 commercial rest her ipad. How can we host it in those 15ipads?, Do I need any of the subscription programs adobe?
Thanks!

function(){return A.apply(null,[this].concat($A(arguments)))}
function(){return A.apply(null,[this].concat($A(arguments)))}Matthew Laun wrote:
Yeah... Someone did that yesterday with 70-something users all trying to get the updated folio at once, and it caused server outages. I've got a feeling we may modify the user agreement to limit this. Not saying for sure, just a word of caution.
Matthew
I don't understand this reply at all. Many of us have been using acrobat.com in exactly this fashion, and I've posted about it many times; including a full review:
http://forums.adobe.com/message/3853106#3853106
Did Adobe not see this coming? How would you limit the download amount without gutting the functionality? Would this apply to paid acrobat.com accounts as well?
I'm about to upgrade my acrobat.com account this week to host more than 1 folio. You need to clarify what you mean by 'modify the user agreement' ASAP.

Doubt about a null value assigned to a String variable

Hi,
I have a doubt about a behavior when assigning a null value to a string variable and then seeing the output, the code is the next one:
public static void main(String[] args) {
        String total = null;
        System.out.println(total);
        total = total+"one";
        System.out.println(total);
}the doubt comes when i see the output, the output i get is this:
null
nulloneA variable with null value means it does not contains a reference to an object in memory, so the question is why the null is printed when i concatenate the total variable which has a null value with the string "one".
Is the null value converted to string ??
Please clarify
Regards and thanks!
Carlos

null is a keyword to inform compiler that the reference contain nothingNo. 'null' is not a keyword, it is a literal. Beyond that the compiler doesn't care. It has a runtime value as well.
total contains null value means it does not have memory,No, it means it refers to nothing, as opposed to referring to an object.
for representation purpose it contain "null"No. println(String) has special behaviour if the argument is null. This is documented and has already been described above. Your handwaving about 'for representation purpose' is meaningless. The compiler and the JVM don't know the purpose of the code.
e.g. this keyword shows a hash value instead of memory addressNo it doesn't: it depends entirely on the actual class of the object referred to by 'this', and specifically what its toString() method does.
similarly "total" maps null as a literal.Completely meaningless. "total" doesn't 'map' anything, it is just a literal. The behaviour you describe is a property of the string concatenation operator, not of string literals.
I hope you can understand this.Nobody could understand it. It is compete nonsense. The correct answer has already been given. Please read the thread before you contribute.

Doubt about Select statement.

Hi folks!!
             I have a few doubts about the select statements, it may be a silly things but its useful for me.
what is   difference between below statment.
1)SELECT * FROM TABLE.
2)SELECT SINGLE * FROM TABLE
3)SELECT SINGLE FROM TABLE.
Hope i will get answer,thanks in advance.
Regards
Richie..

Hi,
try this and if possible use sap help.i mean place the cursor on select and press F1.
             Types of select statements:
1.     select * from ztxlfa1 into table it.
             This is simple select statement to fetch all the data of db table into internal table it.
   2.   select * from ztxlfa1 into table it where lifnr between 'V2' and 'V5'.
        Thisis using where condition between v2 and v5.
4. select * from ztxlfa1 where land1 = 'DE'. "row goes into default table work Area
5. select lifnr land1 from ztxlfa1
        into corresponding fields of it   "notice 'table' is omitted
         where land1 = 'DE'.
          append it.
           endselect.
     Now data will go into work area. and then u will add it to internal table by
        append statement.
6.   Table 13.2 contains a list of the various forms of select as it is used with internal tables and their relative efficiency. They are in descending order of most-to-least efficient.
Table 13.2 Various Forms of SELECT when Filling an Internal Table
Statement(s)                                   Writes To
select into table it                                    Body
select into corresponding fields of table it   Body
select into it                                    Header line
select into corresponding fields of it           Header line
7. SELECT VBRK~VBELN
       VBRK~VKORG
       VBRK~FKDAT
       VBRK~NETWR
       VBRK~WAERK
       TVKOT~VTEXT
       T001~BUKRS
       T001~BUTXT
    INTO CORRESPONDING FIELDS OF TABLE IT_FINAL
    FROM VBRK
    INNER JOIN TVKOT ON VBRKVKORG = TVKOTVKORG
    INNER JOIN T001 ON VBRKBUKRS = T001BUKRS
    WHERE VBELN IN DOCNUM AND VBRK~FKSTO = ''
   AND VBRK~FKDAT in date.
Select statement using inner joins for vbrk and t001 and tvkot table for this case based on the conditions
8. SELECT T001W~NAME1 INTO TABLE IT1_T001W
FROM T001W INNER JOIN EKPO ON T001WWERKS = EKPOWERKS
WHERE EKPO~EBELN = PURORD.
here selecting a single field into table it1_t001winner join on ekpo.
9. SELECT BUKRS LIFNR EBELN FROM EKKO INTO CORRESPONDING FIELDS OF IT_EKKO WHERE     EBELN IN P_O_NO.
ENDSELECT.
SELECT BUTXT   FROM T001 INTO IT_T001 FOR ALL ENTRIES IN IT_EKKO WHERE BUKRS = IT_EKKO-BUKRS.
ENDSELECT.
APPEND IT_T001.
here I am using for all entries statement with select statement. Both joins and for all entries used to fetch the data on condition but for all entries is the best one.
10. SELECT AVBELN BVTEXT AFKDAT CBUTXT ANETWR AWAERK INTO TABLE ITAB
             FROM VBRK AS A
             INNER JOIN TVKOT AS B ON
             AVKORG EQ BVKORG
             INNER JOIN T001 AS C ON
             ABUKRS EQ CBUKRS
             WHERE AVBELN IN BDOCU AND AFKSTO EQ ' ' AND B~SPRAS EQ
             SY-LANGU
             AND AFKDAT IN BDATE AND AVBELN EQ ANY ( SELECT VBELN FROM
            VBRP WHERE VBRP~MATNR EQ ITEMS ).
    Here we are using sub query in inner join specified in brackets.
Thanks,
chandu.

Doubt about Bulk Collect with LIMIT

Hi
I have a Doubt about Bulk collect , When is done Commit
I Get a example in PSOUG
http://psoug.org/reference/array_processing.html
CREATE TABLE servers2 AS
SELECT *
FROM servers
WHERE 1=2;
DECLARE
CURSOR s_cur IS
SELECT *
FROM servers;
TYPE fetch_array IS TABLE OF s_cur%ROWTYPE;
s_array fetch_array;
BEGIN
OPEN s_cur;
LOOP
    FETCH s_cur BULK COLLECT INTO s_array LIMIT 1000;
    FORALL i IN 1..s_array.COUNT
    INSERT INTO servers2 VALUES s_array(i);
    EXIT WHEN s_cur%NOTFOUND;
END LOOP;
CLOSE s_cur;
COMMIT;
END;If my table Servers have 3 000 000 records , when is done commit ? when insert all records ?
could crash redo log ?
using 9.2.08

muttleychess wrote:
If my table Servers have 3 000 000 records , when is done commit ? Commit point has nothing to do with how many rows you process. It is purely business driven. Your code implements some business transaction, right? So if you commit before whole trancaction (from business standpoint) is complete other sessions will already see changes that are (from business standpoint) incomplete. Also, what if rest of trancaction (from business standpoint) fails?
SY.

About message queue in message mapping?

Hi SDNer,
I have been read help.sap.com and sdn threads about message queue
I hope this thread should be help for all like me.
thank you
Sha

Hi Shankar,
XI uses Queue's to store messages, If you worked on message mapping you can see the how queue look like,
Every queue having context ,it separate the values,it store the messages in highrarchy manner.
Using Context Handling we resoleve context issues.
Using node functions we aceive Context Handling.
Search in SDN there is some good blogs abt Node Functions, if you understand nodefunction you wil understand the Queue concepts.
Regards,
Raj

XI to Xi communication( doubt about message interafce)

Similar Messages

Maybe you are looking for