XI - Unable to find channel ID

Hello,
I am trying to post a message via HTPP and I get the error message
Message Data - Error category: XI_J2EE_ADAPTER_ENGINE
Message Data - Error code: CHANNEL_DETERMINATION_FAILED
Audit Log - Error: Unable to find channel ID
Audit Log - Error: Delivery of the message to the application using connection AFW failed, due to: Couldn't find delivery channel for message:
Could you help me on this topic, please?
Thanks in advance for your answer,
Vincent,

Hi Vincent,
Here are a couple of suggestions which normally works.
I guess you should check your receiver agreement, i.e your receiver channel.
RWB --> Component monitoring --> Adapter monitoring --> your receiver channel (it should be green).
If it is not, then thats where the problem lies.
Also there is a nice link for Problem Analysis Guide, which tells you the approach to take to analyse a problem,
http://help.sap.com/saphelp_nw04/helpdata/en/6c/7ffb3f6c78ee28e10000000a1550b0/frameset.htm
Also check your Pipeline URL in SLD.
Business System ->Click On -> Pipe Line URL
It should be
http://Server:port/sap/xi/engine?type=entry
Second, Go to SICF Transaction in XI, and activate the service sap/xi/engine
For more
Transmitting message to entry pipeline failed !!
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Also Double check your port(for the second URL). It should be the HTTP port listed when you go to txn SMICM then Goto->Services. The port you have there looks like the J2EE port.
If nothing works, Just try to restart AFW and AFxxx services (from Visual Admin)
Steps to restart AFW and AFxxx services are:
Start the Visual Admin tool. Connect to your XI J2EE Engine (640).
Go to Server->Services.
Try to restart such services as "SAP XI AF Messaging", "SAP XI AF Core", "SAP XI Adapter: XI", etc.
Regards,
Abhy
Message was edited by: Abhy Thomas

Similar Messages

Unable to find channel ID at inbound SOAP Adapter

Hi experts,
I encountered a very puzzling problem:
I have a scenario:
IDOC -> XI -> SOAP
For 2 interfaces of such nature, 1 works fine, 1 doesn't.
The one that does not work is throwing the following error in RWB - Message Display Tool (MDT):
2007-03-22 10:57:05 Success The message was successfully received by the messaging system. Profile: XI URL: http://ootspdbs02:50100/MessagingSystem/receive/AFW/XI
2007-03-22 10:57:05 Success Using connection AFW. Trying to put the message into the receive queue.
2007-03-22 10:57:06 Success Message successfully put into the queue.
2007-03-22 10:57:06 Success The message was successfully retrieved from the receive queue.
2007-03-22 10:57:06 Success The message status set to DLNG.
<b>2007-03-22 10:57:06 Error Unable to find channel ID
2007-03-22 10:57:06 Error Delivery of the message to the application using connection AFW failed, due to: Couldn't find delivery channel for message: a277e57c-c837-e44f-9ae2-da0d701980c4. </b>
2007-03-22 10:57:06 Success The asynchronous message was successfully scheduled to be delivered at Thu Mar 22 10:58:06 SGT 2007.
2007-03-22 10:57:06 Success The message status set to WAIT.
In SXMB_MONI, it shows the message has been processed successfully - indicating that the mapping is fine. Status = Awaiting acknowledgement.
I've looked up the forums, and the general solution offered is to refresh the SLD cache.
I've tried that, but it doesn't work.
Please help.
Thanks.
Ron

> hmm.. then things not a problem with the cache.
> Is the error in MONI? Or is it in the Adapter Engine?
>
>
> I know it isrepeatitive, but checking if the Objects
> are all active and correct in the ID is the only
> solution I can suggest.
>
> Regards
> Bhavesh
In the MONI, the status is successful, awaiting acknowledgement.
After sometime, the ack status will be "Acknowledgement contains System Errors"
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_ROUTING_BACK_ERROR</SAP:Code>
<SAP:P1>,BS_DEV1_NAUTICUS_OOTS</SAP:P1>
<SAP:P2>,BS_NHGDDBS01,,</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error occurred during back-routing Error in communication channel</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
But I don't think these are related, because the message wasn't sent out, naturally there's an error in the ack.

Transactions "unable to find channel"

Hello,
I have made two test channels on my server - but doing a "rug channels" on
my clients gives a "No channels available" message (and performing a
transaction fails, giving an "unable to find channel" message).
I followed instructions in the ZLM Admin docs while setting up, the clients
both work fine with red-carpet.ximian.com, I was able to add the service
for my local ZLM server fine, and they both activated fine with a test
activation key I made, but for some reason they can't see any channels on
this server.
I'm at a bit of a loss troubleshooting the problem - can't figure out what
I might have missed! Any suggestions? (I'm using ZW6.5 on SLES8-SP3, with 2
clients: SLES9 and SuSE-Pro-9.1).
Many thanks for any help,
Karl

Kpodesta,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Error: Unable to find channel ID

Hello,
I have an scenario R/3 - XI - Mail in GEN, the same scenario was working perfectly in GED but after transporting it to GEN it does not work.
In the adapter monitoring I can see the following error: 'Unable to find channel ID'. Does anybody know the reason of this error?
Thanks in advanced,
Luis.

hi,
- check if all directory objects are tranported to new landscape!
- activate communication channel once more
- refresh CPA cache
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Unable to find channel ID - using Test Message in RWB

Hey all - we are using the Test Message tab of the RWB, and we get "Unable to find channel ID" as the response to our message being sent. We are clueless what this means... since this is supposed to send straight into the engine, I'd expect something like "no interface determination" or sometimes similar - but we can't figure out what this error means. This is the message we get, regardless of payload or interface chosen... We even chose an interface that has already been tested & is running successfully into XI via the JMS adapter, so we know the actual path thru XI is valid.
Help is appreciated - I'm sure this is something silly we don't have set up that we need...

We were hitting the Test tab after clicking the AF in RWB - you should choose the engine... it likes that much better.

"Unable to find channel ID" error.

Hello experts,
We are building an IDOC->XI->JMS scenario.
Sending the IDOC gets it into the XI and it is visible inside the SXMB_MONI. Looking at a trace level 3 on the trace section of the message you can see that all pipeline activities are performed as normal.
The last action of the Outbound Binding is successful and the correct Communication channel name (from the Receiver Agreement) is displayed in the trace - meaning was selected.
Looking in the RWB on the details of the message show that:
- message was received from http://xiserver:50000/MessagingSystem/receive/AFW/XI
- The message goes in and out of the receive queue.
- the message status set to DLNG
- Unable to find channel ID.
- ... error stuff..
This Channel ID error is the one who causes us trouble.
Looking at the same place for a PROXY->XI->JMS scenario shows that the correct channel is selected. this channel is the channel in the receiver determination - the name only exists there so it doesn't relate to any other channel (like MQ channel).
Could really use help finding this problem source or activating J2EE traces the could point to what's wrong.
Thank's - Yoad.

Hi,
One thing which could be wrong is the cache. Try in the IB:Directory to see if all things have been succesfully committed to the CPA.
Then try to refresh the CPA cache. http://xiserver:50000/CPACache/refresh?mode=full (Login as XIDIRUSER)
If you are on SP 12, you could use NW administrator on http://xiserver:50000/nwa -> select Monitoring -> Logs and traces and in the blank dropdownbox select Default trace.
Hope this helps

Unable to find channel ID

Hello,
I am running into some problems testing out a scenario using the test tool in the rwb that is supposed to do a simple map and write to a table using the JDBC adapter.
The error I get in the message monitor are:
Message Data - Error catagory: XI_J2EE_ADAPTER_ENGINE
Message Data - Error code: CHANNEL_DETERMINATION_FAILED
Audit Log - Error: Unable to find channel ID
Audit Log - Error: Delivery of the message to the application using connection AFW failed, due to: Couldn't find delivery channel for message:
Using the test configuration tool in the Configuration Bulider test is successful, it finds Rec Det, Interface Det, Interface Mapping and Rec Agreement etc.
If anyone can give me any pointers would be very appreciated!
Thanks
Nam

Hello!
Wow, that was quick!
I originally tried clicking directly on the adapter engine (central) and sending from there. That sends the message to http://ac4sap02:58100/MessagingSystem/receive/AFW/XI.
That generates the errors I listed below.
I tried following your weblog and clicking on the Integration Server and testing from there. Message is sent to:
http://ac4sap02:58100/sap/xi/engine?type=entry
This generates an error: Error when sending message: 404 Not Found.
When testing the engine service in SICF I get the errors below:
Pipeline specified in URL attribute (type) not existing
URL_PIPELINE_NOT_FOUND
Pipeline ID , which is expected as value of attribute "type" in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine?sap-client=510
Thanks!
Nam

Unable to find channel ID in multi-mapping scenario

Hi all,
my scenario RFC-adapter-XI-File-adapter works fine, if I use a mapping without splitting the source message.
The supposed file is generated.
But If I split the source messsage in message mapping I see successfully splitted payloads in monitoring, but the files are not generated because of Error "channel ID can not be found".
AND "Zustellung der Message an die Anwendung über AFW ist fehlgeschlagen weil: Couldn't find delivery channel for message: 307e06d0-41c5-11db-96be-0017a41036a2. Message wird auf 'fehlgeschlagen' gesetzt"
I checked alread the whole forum and found some interesting informations, but nothing helped me..
Has anybody an idea?
Thanks a lot!

Hi Florian,
It looks like the system is unable to find a Receiver agreement / Communication Channel for one of the Messages created by the Map.
Check whether the Receiver Agreements exist for both Message Interfaces created by message split.
Hope this helps.
Rgds
R Chandrashekhar

Error when access instrument "Primary Error: (Hex 0xBFFA003D) Unable to find any channel or repeated capability strings"

Hi All,
I believe I have configured MAX correctly. I am trying to use the PXI-6229 device via. When I try initialized I receive the following error:
Primary Error: (Hex 0xBFFA003D) Unable to find any channel or repeated capability strings.
Any clues on what the error means?
Thanks
Minesh
Solved!
Go to Solution.

First of all you'll get more help in the correct forum. This seems like a DAQmx issue and their forum is here: http://forums.ni.com/t5/Multifunction-DAQ/bd-p/250
Secondly does this help: http://forums.ni.com/t5/Switch-Hardware-and-Software/NI-SwitchExec-with-3499-and-IVIDriver/td-p/1827...
Lastly: Can you communicate with the card from MAX? Or is the error happening in MAX? What language are you using to talk to the card with? Are you using IVI? If you are using LabVIEW or CVI then open the shipping examples and test them out with that card.
Regards,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Unable to find line break between two lines in attachment file.

Dear all I will be very great full if someone help me out,
I am trying to send mail through SMTP server with an attachment of oracle report, but I am unable to find line break between two lines, when I down load the attachment from mail and open attach.txt file by double click on it. Next line starts right after previous line ends, it should starts with new line.
In order to send an attachment file, I am reading source file line by line and put MIME protocol’s attachment instance, contain of source file is being properly written into target file if I open that attachment on cmd prompt.
Following code may help you to understand the case.
Thanks in advance.
My code is as follows:-
create or replace procedure bec_file_test
v_subject varchar2, -- Subject of the email
v_body varchar2, -- Body of the email
v_from VARCHAR2 default 'XYZ.com', -- sender mail id
v_to varchar2 default 'XYZ.com', -- Field To of the email
v_cc varchar2 default 'XYZ.com' -- cc address
) is
-- variable to hold the smtp server connection
v_smtp_connection utl_smtp.connection;
-- variable to hold the smtp host name
v_smtp_host varchar2(100) default 'mail.bec-group.com';
-- variable to hold the smtp port
v_smtp_port number default 25;
-- composite of {CR}{LF} caridge return and line feed.
CRLF varchar2(2):=CHR(13)||CHR(10);
cursor pr_rec is
select requisition_no,line_no,release_no,a.contract,
a.project_id,substr(a.activity_seq,1,11)ACT_SEQ,
substr(a.part_no,1,12)PART_NO,
substr(a.description,1,32)DESCRIPTION,
substr(a.Bal_qty,1,8) BAL_QTY,
substr(a.unit_meas,1,5)UOM,
a.wanted_receipt_date WAN_REC_DT,
a.latest_order_date LAT_ORD_DT
from bec_pr_line_rep a
where a.Bal_qty>0 and a.header_state not in 'Closed'
and upper(a.state1) like 'RELEASED' and a.contract not in ('U1ENG','ULENG','U1FND','U2FND')
and a.buyer_code='70306'
order by a.part_no;
begin
declare
fHandle UTL_FILE.FILE_TYPE;
v_msg_line varchar2(2000);
-- v_buffer varchar2(20000);
--ALTER SYSTEM SET utl_file_dir = 'D:\Database\temp'
--COMMENT='Temporary change on Dec 14'
--SCOPE=SPFILE;
SELECT name, value
FROM gv$parameter
WHERE name = 'utl_file_dir';
--drop directory my_directory
--CREATE or replace DIRECTORY my_directory AS 'D:\database\temp';
--GRANT read,write ON DIRECTORY my_directory TO PUBLIC;
begin ---writing data into a file.
fHandle := UTL_FILE.FOPEN('MY_DIRECTORY', 'pending_pr_summry.txt', 'w');
UTL_FILE.put_line(fHandle, ' Pending PR to process (detail report)');
UTL_FILE.put_line(fHandle,TO_CHAR(SYSDATE,'MM-DD-YY HH:MI:SS AM'));
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, 'Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt' );
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
for pr_temp in pr_rec loop
begin
v_msg_line:=to_char(rpad(pr_temp.requisition_no,12,' ')||'|'||
lpad(pr_temp.line_no,3,' ')||'|'||
lpad(pr_temp.release_no,3,' ')||'|'||
rpad(pr_temp.contract,7,' ')||'|'||
lpad(nvl(pr_temp.project_id,' '),7,' ')||'|'||
lpad(nvl(pr_temp.act_seq,' '),12,' ')||'|'||
lpad(pr_temp.part_no,12,' ')||'|'||
rpad(pr_temp.description,35,' ')||'|'||
lpad(pr_temp.bal_qty,10,' ')||'|'||
rpad(pr_temp.uom,6,' ')||'|'||
lpad(pr_temp.wan_rec_dt,14,' ')||'|'||
lpad(pr_temp.lat_ord_dt,14,' '));
UTL_FILE.put_line(fHandle,v_msg_line);
end;
end loop;
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, ' Regards : IFSAPP ( Application owner ) ');
UTL_FILE.FCLOSE(fHandle); ------------writing into file is successfuly done here!
--Reading of file starts here containt will be added in attchment file
fHandle :=UTL_FILE.FOPEN('MY_DIRECTORY','pending_pr_summry.txt','R' );
-- establish the connection to the smtp server
v_smtp_connection := utl_smtp.open_connection(v_smtp_host, v_smtp_port); /** OPEN CONNECTION ON THE SERVER **/
-- perform a handshake with the smtp server
utl_smtp.helo(v_smtp_connection, v_smtp_host); /** DO THE INITIAL HAND SHAKE **/
-- set the 'from' address of the message
utl_smtp.mail(v_smtp_connection, v_from);
-- add the recipient to the message
utl_smtp.rcpt(v_smtp_connection, v_to);
-- send the email
utl_smtp.open_data(v_smtp_connection);
v_msg_line:='Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || CRLF ||
'From: ' || v_from || CRLF ||
'Subject: ' || v_subject || CRLF ||
'To: ' || v_to || CRLF ||
'Cc: ' || v_cc || CRLF ||
'MIME-Version: 1.0'|| CRLF || -- Use MIME mail standard
'Content-Type: multipart/mixed;'||CRLF ||
' boundary="-----SECBOUND"'||CRLF||
CRLF ||'-------SECBOUND'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'Content-Transfer_Encoding: 7bit'|| CRLF ||
CRLF ||v_body|| CRLF;     -- Message body
utl_smtp.write_data(v_smtp_connection,v_msg_line);
v_msg_line:='-------SECBOUND'|| CRLF ||
'Content-Type: application/octet-stream;'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'name="pending_pr_summry.txt"'|| CRLF ||
'Content-Transfer_Encoding: 8bit'|| CRLF ||
'Content-Disposition: attachment;'|| CRLF ||
' filename="pending_pr_summry.txt"'|| CRLF || CRLF;     -- Content of attachment
utl_smtp.write_data(v_smtp_connection,v_msg_line);
-- check file is opened
IF utl_file.is_open(fHandle) THEN
-- loop lines in the file
LOOP
BEGIN -- Content of attachment
utl_file.get_line(fHandle,v_msg_line);
v_msg_line:=concat(v_msg_line,CRLF);
utl_smtp.write_data(v_smtp_connection,v_msg_line);
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
END LOOP;
END IF;
--end of attachment containt
utl_smtp.write_data(v_smtp_connection,v_msg_line);
UTL_FILE.FCLOSE(fHandle);
utl_smtp.close_data(v_smtp_connection);
utl_smtp.quit(v_smtp_connection);
exception
when utl_smtp.invalid_operation then
dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
when utl_smtp.transient_error then
dbms_output.put_line(' Temporary e-mail issue - try again');
when utl_smtp.permanent_error then
dbms_output.put_line(' Permanent Error Encountered.');
when others then
dbms_output.put_line('Exception: SQLCODE=' || SQLCODE || ' SQLERRM=' || SQLERRM);
RAISE;
end;
end bec_file_test;

Pending PR to process (detail report)01-17-13 12:43:19 PM--------------------------------------------------------------------------------------------------------------------------------------------------Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt--------------------------------------------------------------------------------------------------------------------------------------------------MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade |500|kg |30-NOV-2012| 20-nov-2012MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012MAT/250606 | 2| |NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | |1|NMDCJ|6001|100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1|pkt | 25-DEC-2013| 14-dec-2013--------------------------------------------------------------------------------------------------------------------------------------------------
where as source file is like that:-
Pending PR to process (detail report)
01-17-13 12:43:19 PM
Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt
MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade | 5500|kg | 30-NOV-2012| 20-nov-2012
MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012
MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012
MAT/250606 | 2| 1|NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012
MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1 |pkt | 25-DEC-2013| 14-dec-2013
Ignore alignment. It is well formatted in source file.

My ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Unable to find associated SLD element

Hello,
We are currently setting up our PI 7.1 evaluation system. When we assign a business system (ECC6.0) from the SLD in the Integration Builder and tick "Create communication channels automatically" we receive the following error message:
Could not create communication channel: Unable to find associated SLD element for specified class (source element: SAP_BusinessSystem, [CreationClassName, SAP_BusinessSystem, string, Name, test, string], target element class: SAP_HTTPServicePort)
In the IB the following communication channels are however created successfully:
- GeneratedReceiverChannel_HTTP
- GeneratedReceiverChannel_RFC
- GeneratedReceiverChannel_IDoc
- GeneratedReceiverChannel_XI
- GeneratedReceiverChannel_WS_Local
- GeneratedSenderChannel_WS
Any idea what this error message means and how to correct it?

Thanks for the reponses.
Abhishek,
I've been through the forum posts and they all refer to issues with the Adapter Framework or Integration Directory. I have worked through them though and none of the resolutions help with my issue.
Divya,
Regarding note 1117249; yes I saw this can be an issue from previous posts on SDN so have confirmed the PI components are all present in the SLD, as shown below, and registered against the same domain:
- Adapter Engine on (SID)
- Domain (host)
- Integration Directory on (SID)
- Integration Repository on (SID)
- Integration Server on (host)
- RWB on (SID).(host)
Regarding note 764176; I have checked the RWB and all expected components are present and green (except web service security, which is amber):
- Integration Server
-- Integration Engine (SID)
-- Business Process Engine (SID)
-- Mapping Runtime (SID)
-- Adapter Engine (SID)
Ran the Cache Connectivity Test from RWB and it reported everything green.
Also in CIM instances under XI Integration Server the following associations are present:
- XI Contained Integration Server - associated with XI Domain 'Domain (host)'
- XI Integration Server Logical Identity - associated with Business System 'INTEGRATION_SERVER_(SID)'
- XI Sub-System viewed Application System - associated with BC System '(SID) on (host)'
In Technical Landscape under Technical System Type PI the 'Application System' column is populated with '(SID) on (host)' for all entries except for the entry of type XI Domain.
NB. I have deliberate obscured host and SID with (host) and (SID) respectively.
The above entries all look correct to me and J2EE was restarted very recently so have not removed the entries as described in note 764176...
Perhaps I could try to create the communication channel manually? Any idea which one uses the "SAP_HTTPServicePort" class?

Unable to find TUPEL attribute in ppoma_crm

Hello All,
We are implementing SAP CRM 7.0 Version enhancement pack 2.0, in ppoma_crm we are not able to see the attributes like TUPEL or division or distribution channel, please advice.
I am pasting screen shots of my ppoma_crm
The relevant Sales Org under the function tab is checked
The objects permitted under determination are also checked for my sales scenario
When I scroll below to check my attributes I am unable to find the attributes Tupel,Distribution channel and Division.kindly advice.
Kind Regards
Atul

Hi Kamlendra,
1) The report CRMC_R3_ORG_GENERATE was run without error's
2) Also check your org stricture- division and distribution channel will come under function tab- All my distribution channels and divisions have come under the function tab.
3) Run the report CRM_MKTBP_ZCACL_UPDATE_30 in SA38- Could you please throw light on this report, since we have not run this report, will the issue get resolved after running the report?
Kind Regards
Atul

Forest trust unable to find Active Directory Domain Controller

I have two domains with a two-way forest trust. We'll call them ForestA and ForestB. They're on seperate subnets. ForestA's DCs are in one physical location. ForestB's DCs are in two locations, one of which is shared with A.
I'm unable to route traffic directly from the remote DC in ForestB to the subnet ForestA is on, so I created a new DC in ForestA that sits on the subnet ForestB uses (basically, I can't route between subnets via the wireless bridge between locations, but
can within the same location).
I found this: http://www.neomagick.net/zen/2008/11/30/using-dns-to-force-a-domain-trust-through-a-specific-domain-controller-dc/
I followed the instructions to set the new DC in forest A to be the only one the remote DC in forest B was aware of.
Nslookup ForestA.com resolves correctly to this DC, but I'm unable to validate the trust relationship, getting the error:
"Windows cannot find an Active Directory Domain Controller for the ForestA.com domain. Verify that an AD DC is available and then try again."
I'd appreciate any help.

In the event viewer, have you found any event id's that corrospond with this error? Have you ensured all ports required are open? Windows firewall is correctly setup? NIC is properly configured?
Statement below taken from: http://technet.microsoft.com/en-us/library/cc961803.aspx
If you receive the following error, ERROR_NO_LOGON_SERVERS while using the Nltest tool to query the secure channel, this is usually indicative of the inability to find a domain controller for that domain. Run nltest /dsgetdc: < DomainName > : to verify
whether you can locate a domain controller. If you are unable to find a domain controller examine DNS registrations and network connectivity.
ADDS Ports:
http://msdn.microsoft.com/en-us/library/dd772723(v=ws.10).aspx

Unable to find archived log

Hi
I am restoring a hot backup taken through RMAN using following commands:
configure controlfile autobackup on;
BACKUP DATABASE ;
BACKUP ARCHIVELOG ALL DELETE INPUT;
Now I am going to restore that using following commands:
restore spfile from autobackup;
restore controlfile from autobackup;
shutdown immediate;
startup mount;
restore database;
RECOVER DATABASE;
ALTER DATABASE OPEN RESETLOGS;
But it goes fine till restore database. At recover database I get following errors:
archived log for thread 1 with sequence 2461 is already on disk as file /u01/app/oracle/fast_recovery_area/XE/onlinelog/o1_mf_1_8fbs9bvt_.log
archived log for thread 1 with sequence 2462 is already on disk as file /u01/app/oracle/fast_recovery_area/XE/onlinelog/o1_mf_2_8fbs9chb_.log
unable to find archived log
archived log thread=1 sequence=545
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 09/11/2013 20:41:43
RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 545 and starting SCN of 25891726
I have checked the backup folder and there are only empty date wise folders under archivedlog folders.
If I write RMAN> ALTER DATABASE OPEN RESETLOGS; I get:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 09/11/2013 20:43:01
ORA-01190: control file or data file 1 is from before the last RESETLOGS
ORA-01110: data file 1: '/u01/app/oracle/oradata/XE/system.dbf'
If I write RMAN> recover database until sequence 545; I get
Starting recover at 11-SEP-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=695 device type=DISK
starting media recovery
unable to find archived log
archived log thread=1 sequence=545
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 09/11/2013 21:09:34
RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 545 and starting SCN of 25891726
I don't mind if some data is lost. Will be really thankful if someone can help me get my database open;
Habib

They way you are trying to recover will try to recover up to the last know SCN. Try to do a point in time recover up to a few minutes before the database was shutdown or crashed.
Try something like this
run{
set until time "to_date('2013-09-11:00:00:00', 'yyyy-mm-dd:hh24:mi:ss')";
restore spfile from autobackup;
restore controlfile from autobackup;
shutdown immediate;
startup mount;
restore database;
RECOVER DATABASE;
ALTER DATABASE OPEN RESETLOGS;

XI - Unable to find channel ID

Similar Messages

Maybe you are looking for