XI Upgrade on 6.40 system to the 170 kernel
Hi all hope someone can help. I need to know what MUST BE upgrade when switching to the 170 Kernel. Whether we need to install database patch, or jdk or crm patch etc etc.
I am on a JDK 1.4 as 6.40 release
The kernel can live with components which have a lower patch lever. It is the other way around which is difficult. For example SAP_BASIS patchlevel 19 does require a higher kernel patch than SAP_BASIS patch level 16. So you can patch the kernel and leave all other components on their respective patch level, but the question is why would you patch the kernel and don't want to patch the rest.
Hope that helped
Regards
Cornelius
Similar Messages
-
I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade
iCloud requires OS X 10.7.2.
-
On both Mini Mac and iMac 27" I am no longer able to utalize the Startup Disk icon in System Preferences; the Windows 8 on Bootcamp partition works fine if I close the Mavericks OX and select the Windows partition at bootup from the hard drive. My question is why don't the icon in System Prederences work anymore since I upgraded to Mavericks. Also, Users & Groups, Printers & Scanners icons no longer work either.
On both Mini Mac and iMac 27" I am no longer able to utalize the Startup Disk icon in System Preferences; the Windows 8 on Bootcamp partition works fine if I close the Mavericks OX and select the Windows partition at bootup from the hard drive. My question is why don't the icon in System Prederences work anymore since I upgraded to Mavericks. Also, Users & Groups, Printers & Scanners icons no longer work either.
-
I have Garageband version 4.1.2 (248.7) installed on my early 2008 IMAC 10.5.8. I have never upgraded. If I upgrade my operating system to the next level (10.6?) will my GB version still work? I have a LOT of projects involved and hope they will transfer. Can I (and should I) upgrade GB at the same time and how far should I go with that without causing a problem with my projects? What would I gain if I upgrade GB? Thanks!
Nancyfromeasttexas wrote:
I have Garageband version 4.1.2 (248.7) [...] If I upgrade my operating system to the next level (10.6?) will my GB version still work?
my copy of 4.1.2 appears to work under 10.6.8, though i have not done extensive tests
Nancyfromeasttexas wrote:
I have a LOT of projects involved and hope they will transfer.
they should
Nancyfromeasttexas wrote:
Can I (and should I) upgrade GB at the same time
sure
Nancyfromeasttexas wrote:
(and should I) upgrade GB at the same time
v4 is pretty lonh in the tooth now, and GB only costs $15, so I'd think it's a good idea
Nancyfromeasttexas wrote:
how far should I go with that without causing a problem with my projects?
the only version you can buy new is v6,a nd it should open older projects without issue ... however you could keep 4 around:
http://www.bulletsandbones.com/GB/GBFAQ.html#installnewkeepold
(Let the page FULLY load. The link to your answer is at the top of your screen)
Nancyfromeasttexas wrote:
What would I gain if I upgrade GB?
v5:
http://www.bulletsandbones.com/GB/GBFAQ.html#whatsnew09
(Let the page FULLY load. The link to your answer is at the top of your screen)
v6:
http://www.bulletsandbones.com/GB/GBFAQ.html#whatsnew11
(Let the page FULLY load. The link to your answer is at the top of your screen) -
I have Adobe Photoshop CS4 and have just upgraded my Mac operating system to Yosemite with the newest version of Java 2014 running. When I try to access Photoshop from Bridge or directly open it asks for a Legacy Version of Java 6. As I am a pensioner I cannot afford an upgrade does anyone know of a work-around for this problem?
Hi Daddyfred,
CS4 Photoshop has not been tested on Yosemite. But still you can try the Java 6 update using the below link.
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase6-419 409.html
Thank you for posting on Adobe Forums. -
I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!
You did turned in Settings > General > Usage > Battery Percentage: ON?
Try a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data -
I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices from other manufacturers ...
People are dissatisfied with the new update a lot, including some of my friends and acquaintances. Is it reasonable to wait until Apple implements the possibility to return to Ios Ios 6 to 7? And how soon it can be done?
Sorry for my english, i am from Russia.I have a similar issue. I recently purchased an iPad Mini, and I started off by backing it up from the apps I had on my iPhone. Now, I have a number of apps that never downloaded and that I don't want on the iPad. Some of these are apps that I don't need, while others are the iPhone versions of apps. There are something like 23 apps that I have no use for, but iTunes tries to install every time I connect. I've also tried clicking the 'Will Install' buttons. There's no way to delete these apps from the iPad without first installing them, as far as I can see, and there's no way to NOT install them, in iTunes.
It''s not just annoying, it's causing problems with installation of larger files and movies. Now, every time I sync to the computer, I get a warning that I'm over capacity by 580 MB, and larger apps will not install! Clicking Revert and a bunch of other things doesn't work, either. And I can't just delete some of the apps, because I or my wife use them on our phones! -
Im trying to upgrade my firefox and I get the incompatible browser message. Im runnning Mac OS 10.5.8 which according to your system requirements should be fine?
You can not update to 7.0.1 because you have PPC, read here the solution chosen for more information:
https://support.mozilla.com/en-US/questions/891475
thank you -
Including SPAU for subsequent systems after the upgrade
Hello All,
We are upgrading our landscape from 4.7 to ECC6.0 EHP4. We have completed the ugrade of DEV, but forgot to include the SPAU adjustments in the the Postprocessing phase and have completed the Finalization phase. Once the upgrade was completed we have made the SPAU adjustments and included it in a request. We want to include the request in the upgrade of the subsequent systems. We have gone through the note 68678 and have a few queries.
1. Do we release the task, then choose the transport in SPAU with "Select for transport" and then carry out the steps in the note
or
2. Release the request in DEV and then do the steps in the note 68678.
If there is any other method to follow please suggest
Any suggestion is highy appreciated.
Thanks & Regards
DeepakHey Cheng,
Follow the below steps to select the transport for the subsequent steps
1. Release all the tasks but not the request.
2. Go to your upgrade directory in DEV system /usr/sap/DEV/upg/abap/bin.
3. It will prompt for your root directory. Enter the path /usr/sap/DEV/upg/abap
4. Use the command in the note
./SAPup export TA=C11K904711 TYPE=SPAU LOG=EXP.LOG REL=701
Then if you check the umpdauto.lst the request will be in the list.
Regarding the 2 requests, I think you should ask your development team to combine it into 1 as I am not so sure if 2 requests can be included in SPAU.
Let me know if you have any issues
Regards
Deepak -
Upgrade phase STARTSAP_NBAS error: SYSTEM START failed
During an upgrade from BW 3.5 to BI 7.0, I get the following error
message in phase STARTSAP_NBAS:
SYSTEM START failed, code -2
-2: the test rfc did not work.
Try to log on to the system with user DDIC
When I try to log on to the system as user DDIC, I get the following
error message:
DB-Error -0
The same thing happens when I try to log on as SAP*. I am certain that
the password I submit is correct. I have not changed this password at
any time.
I have included SAP_BASIS support package 14 into this upgrade, and
this requires kernel version 133 at least (Note 822379). This kernel
was copied into the usr\sap\put\exenew directory before the upgrade
began. However, the system still seems to run on kernel version 111.
I have tried to put the 133 kernel into
F:\usr\sap\BWS\SYS\exe\nuc\NTAMD64 so that it is copied into
F:\usr\sap\BWS\SYS\exe\run during system startup, but then all my work
processes die. The gateway also seems to be down using this kernel.
Please help!
Regards,
ThomasHi.
I made a stupid mistake.. the kernel I was using was unicode, but I should use a non-unicode kernel..
Regards,
Thomas -
I was running Mountain Lion and absent-mindedly upgraded to Maverick.
Now it would be nice to have a computer again...
When clicking on an application in the dock, the icon will reluctantly jump once or twice, and then just calls it a day.
Could somebody please help?You ran a defective third-party "utility" such as "CleanMyMac" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system.
The first thing you need to do is remove that software, if you know what it is, according to the developer's instructions. Never install it, or anything like it, again. Then see below.
If you don't already have a current backup, back up all data, then reinstall the OS. You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. -
I had to change my hard drive in my MBP 15". I use Time Machine on a Time Capsule for backup. I am booting up my laptop with a bootable USB key. I have partitioned my new hard drive (bigger than the old one) and named it Macintosh HD (same as the old one). I select the option to restore from Time Machine Backup. I select one of my latest backup....select my destination drive...the restore process starts but stop within minutes with the following message. "An error occurred while adding a recovery system to the destination disk" It then prompts me to restart....
I need your help...what can it be.
ThanksI've encountered this issue when the Time Machine was encrypted with FileVault.
Article: HT4718
Additional Information
Please note that OS X Recovery must be present on the computer's startup volume in order to use FileVault 2. Using RAID partitions or a non-standard Boot Camp partition on the startup disk may prevent OS X from installing a local Recovery system. See "OS X: Some features of Mac OS X are not supported for the disk (volume name)" for more information.
What seems to work, is reinstalling the OSX from the internet, and then using migration assistant to pull the user from the time machine backup external when logged into a temporary administrator user to move the original user back over.
Perhaps if you're stubborn, what would work is the following from the same article:
What to do if the installer warns that no Recovery System can be created
Some disk partition configurations may result in the OS X installer reporting that it could not create a Recovery System. In these situations, even if you are permitted to continue the install, you may want to quit the installation and create an external, bootable OS X hard drive with a Recovery System, first. You can continue your OS X upgrade on your computer's startup drive after creating an external Recovery System.
Your storage device must have at least 13 GB available (after formatting) to install OS X Lion or later and a Recovery partition.
These steps erase and reformat the storage device. This article instructs you on setting up a storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install OS X and a Recovery partition on your external storage device. You should back up any important files that are on the device to a different drive.
This procedure installs a version of OS X that is compatible with the Mac it was created with. Using this OS X system with a different Mac model may produce unpredictable results.
Your computer's serial number is sent to Apple as part of this process to help authenticate your request to download and install OS X Lion.
All of this information was collected by browsing through the public articles on the Apple Support website. -
What are the options other then to re-partition the disk and run lion in one and leopard in another. I suppose I can go over to Google and use their web tools which are compatible with Office. This *****. So much for backward compatability.
Apple makes the Operating System, not the 3rd party apps. In such a big step as upgrading the OS, the user would be the one responsible for making sure that any key apps that they use are compatible with the new OS before taking the step and upgrading.
-
Everytime I try to update to iOS5 on my iPhone 4 I get an error containing 0xE while it is backing up data from the iPhone before installing the new operating system. I have done everything suggested in Apple support with no success. I still get the error everytime (about 5 minutes into backing up iPhone data). How can I upgrade to iOS5 without losing all the data on my iPhone (the error message says that if I continue I will lose all data on the phone)? If I have already synced the phone before upgrading the OS, would I be able to restore my data after installing the new OS by syncing after the OS upgrade is complete? Any help would be greatly appreciated.
I had the same problem today and was able to resolve it without having to do a restore or reset. The problem had something to do with my mail accounts. The upgrade reset my mail settings, switching both my gmail and my .mac mail to "archive all mail". I went into the General Settings, disabled that setting, and resynced the phone. The "other" storage allottment dropped back down to less than a gig.
Before you restore or reset, I would try that first. -
Can please anyone help me with this issue.
After upgrading from iPhoto8 to iPhoto9 my library won't open anymore. I have stored all my pictures on a NAS (Buffalo Link Station Duo). It all worked fine but since upgrading to iPhoto9 I do have the following problem:
When opening iPhoto I receive a message that the library needs to be updated. I assume that iPhoto should just do this sort of automatically in order to upgrade to iPhoto9.However, next message I receive then is
"The library could not be opened because the file system of the library's volume is unsupported."
Apple support so far does not seem to be able to solve my issue. Anyone else having had the same issue and having a solution to this?
Thanks a lot for your help.There is no solution.
IPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos.While you have been lucky to date, many folks with a library on a NAS found that it worked for a while and then the problems started.
Workaround: Put the Library on a Disk Image formatted Mac OS Extended (Journaled) and store that on the NAS. But the real solution is to use a properly formatted disk for the Library.
Regards
TD
Maybe you are looking for
-
Shell script for below pl/sql script dbms_file_transfer
Please let me know how tt write the shell script for below pl/sql script dbms_file_transfer it is I have trasfer the files from asm into filesystem . it is working . but i have to put in the loop begin dbms_file_transfer.copy_file( source_directory_o
-
Volume level ZEN NANO PLUS, can it be chang
I have a new ZEN NANO PLUS that I have bought in Spain. I?ve had this model before and I know that, because of the EU ruling ( **bleep** those bureaucrats! ), the volume level is not as loud as the model you can buy in the US. A few people have sugge
-
WRTU54G-TM asking to put security key
I have WRTU54G-TM at home. Ethernet-cabled desktop comp works excellent as well as laptpop with push-in wireless card (no latest model). This laptop connects to my wireless system not so quick but stable and authomatically, without any questions
-
Best FTP for iWeb produced websites after Mobile Me?
best FTP for iWeb produced websites after Mobile Me?
-
running windows 7 with plenty of memory.when i use the smart brush program is fine but when i start to use detail smart brush program shuts down,PLEASE ADVISE what corrective actions need done thank you