XI3.0-WEB INTELLIGENCE SERVER MEMORY FULL - ERROR (WIS -30280)

Hi All
when i try to open the webi report i get error
WEB INTELLIGENCE SERVER MEMORY FULL - ERROR (WIS -30280)
JAVA Deployment and XIR2 Edit the webi.properties file :
1) Go to windows explorer.
2) Go to C drive (or wherever your Tomcat is installed) c:\programfiles\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\WEB-INF\classes\webi.properties
3) open this file webi.properties with a notepad and add MAX_HEAP_SIZE=1024000000 as the bottom most line of the file.
4) Save the file.
5) Restart the tomcat server and webi as well.
(This works for xir2 and this is not the permanent fix I guess)
For Xi3.0 : XI3.0-WEB INTELLIGENCE SERVER MEMORY FULL - ERROR (WIS -30280)
Cause
The error message appears because the Web Intelligence server stresses the memory resources when processing many reports containing a large amount of data.
Resolution
To resolve the error message, it is necessary to increase the memory heap size value. Complete these steps:
Click Start > Run. The Run dialog box appears.
Type "regedit" in the Open text field. Click OK. The Registry Editor appears.
Navigate to the HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Session Manager.
Click Subsystems > right-click Windows key > click Modify.
Edit the SharedSection value from 1024,3072,512 to 1024,3072,1024.
Also, set this to a value higher than the Web Intelligence Report Server connection time out value found in the Central Management Console. This value is written in minutes. The default value is 20.
Close the Registry Editor.
Restart the Web Intelligence Report Server for the changes to take effect.
So gurus please suggest for any alternative or permanent fix ,as this seems to be workaround.
please suggest me ..........for fixing this webi memory issue in XI3.0 .
Thank You.

Hi,
Anybody has found any solution to this problem? The forum say in XIR2 we have to modify the webi.properties file in c:\programfiles\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\WEB-INF\classes\webi.properties to add MAX_HEAP_SIZE=1024000000 as the bottom most line of the file.
My first question is where can i find this file to add the parameter in XIR3.0? I have many webi.properties. Second question, is it the solution?
Thanks in advance,
Sandra.

Similar Messages

WEB INTELLIGENCE SERVER MEMORY FULL - ERROR (WIS -30280)

How to incress the WEBI Server Memory. On what paramters the Memory will depend on?

You cannot increase the amount of memory Webi can use. It can only use 2GB. At 1.6GB it's supposed to stop accepting requests until it can release some memory and start working again. Depending on your patch level, there is a bug that will prevent this from happenning.
You can, however, add additional Webi servers to your enterprise to handle more load. You can also reduce the number of Maximum Simultaneous Connections that each Webi server can handle to keep the memory cost lower for each server instance.

Web Intelligence server memory full error

Dear Team,
We have installed BO 3.1 SP3 in our office on Windows platform, we
have installed CMC, DF and FSR on the same server. And we often getting
the Web Intelligence server memory full error, so can we separate u201CWeb
Intelligence Reporting Serveru201D on to a separate system to do the load
balancing?
Regards,
kiruba

1) Go to windows explorer.
2) Go to C drive (or wherever your Tomcat is installed) c:\programfiles\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\WEB-INF\classes\webi.properties
3) open this file webi.properties with a notepad and add MAX_HEAP_SIZE=1024000000 as the bottom most line of the file.
4) Save the file.
5) Restart the tomcat server and webi as well.
Just check in below link
XI3.0-WEB INTELLIGENCE SERVER MEMORY FULL - ERROR (WIS -30280)

Web Intelligence server memory is full

Hi All,
We are facing an issue with Webi Intelligence document. Below are the details and our finding from different environments.
Problem in Production: When user runs the Webi report from Infoview, Report is coming as blank even though there is data,
Findings in production:
1. Checked on BW server transaction code ST22 it has session time out.
2. Switched on the trace and did MDX test using MDX query, even that is timed out.
Environment: BOXI3.1 RTM, Windows server, Web Intelligence and BI 7.0
When we are trying to run the same report from QA we are getting the following error u201CWeb Intelligence Server memory is fullu201D
Findings in QA:
1. When user is running the report from Infoview web Intelligence server memory is reaching 1.6GB and is getting hanged.
2. Checked on BW server transaction code ST22 it has session time out.
3. Switched on the trace and did MDX test using MDX query, it is running fine.
Environment: BOXI3.1 and Fix pack 1.3, Windows server, Web Intelligence and BI 7.0
Universe is built on BEX Query and it is running fine both in QA and Production environments.
I would really appreciate your help.
Thanks
Sudha.

Based on this :
2. Checked on BW server transaction code ST22 it has session time out.
3. Switched on the trace and did MDX test using MDX query, it is running fine.
The issue is outside of BO, but with BW query you're using - it returns too much data causing memory overflow and timeouts.
Optimize BW query !!
Also, upgrade to XI3.1 Sp2 Fp2.5 and latest servise pack for BW to resolve some of the issues with large queries that exist on your patch level.

WIS 30280 - Webi Server Memory Full Error

We are getting "WIS - 30280 - Webi Server memory full error" when a report is scheduled in XI R2. When the same report is refreshed it works fine.
Restarting webi didnot help the issue. I have searched in various forums about chaning the registry entry but in vain.
Please suggest where to go next.
Thanks

Hi
do you have other WebI reports which can be scheduled without a problem?
Can you please check the memory consumption of the WebI report and the WebI job servers while the report is run (through the scheduler).
Can you consider updating to SP5?
Regards,
Stratos

Need web intelligence server memory threshold settings for SAP BO BI XI4.0

Hi,
We have found that WIreportserver.exe process taking high memory in our BO systems. We are in SAP Business objects XI 4.0 SP 07 Patch 2 version now.
We have found that the Web intelligence server memory threshold settings to be changed in case of these issues.
But there are no documents that says about the recommended settings for SAP BO BI XI 4.0 version.
The XI 3.1 recommendations(SAP Note:1544103 ) can not be taken as its a 32bit server and the X14.0 is a 64 bit one.
Please let me know the recommended settings for web intelligence server memory threshold settings SAP BO BI XI 4.0 version or any SAP note that says about it.
Any suggestions/ recommendations are welcomed that will fix the issue.
Thanks in advance.
Regards,
Sithara.S

Hi Henry,
PFB the answers inline:
which setting are you referring to?
There is settings for 'Web Intelligence Server Memory Threshold Settings' where we will set values for memory max threshold,memory lower threshold and memory upper threshold values .You can check the SAP note 1544103 which says the settings , but its applicable for 3.1.
and which ones have you changed already?
We have not done any changes in settings yet. We are actually searching for the recommended values.
what errors / symptom are you trying to avoid?
We are facing issue in 'WIreportserver.exe' occupying 100% memory.
Please suggest and let me know if any other information is needed.
Regards,
Sithara S

Memory Full error when using Main Report Preview in VStudio 2010

Framework 4.0.30319
VStudio 10.0.20.219.1
SAP Version- 13.0.2000.0
CR 2008 on local machine- 12.2.0.290
I don't get memory full error when I run the report with my locally installed cr 2008. If I go into my visual studio and do a main report preview I get memory full error.
I get this error running same report in cr 2008- MochiKit is undefined. An error has occurred in the script on this page. file:///c:/Program%20(x86)Business%20Objects/Common/4.0/Crystalreportviewers12/js/crviewer/html.js
I can get past that error and report works fine. I can take the rpt file in vs2010 and it runs from the aspx page with the viewer. But I ca't do a preview from the editing of the rpt file.
Any way to trouble shoot where the memory problem is when doing a preview? Makes it really hard to test other dlls when it does this.

Are you a Developer or QA or end user? Have you discussed this with your Developer at all? We seem to keep going around in circles. Your Developer should know what he did and how to deploy your app and CR assemblies and what to use.
Subject line is VS 2010, CR for VS 2010 is the only version supported in VS 2010. CR 2008 doesn't have 64 bit runtime. therefore it's not an option, your WEB Servers app pool MUST run in 32 bit mode only if you are using CR 2008.
"If I install the 64 bit version of SAP CR. Should the assembly change in the aspx files? different version number?" Nothing in your app, just deploy the 64 bit runtime and set your app pool to run in 64 bit mode.
If you are using CR for VS 2010 then you can run your WEB server in 64 bit mode and use CR for VS 2010 64 redist files on your WEB server. Then all DB Drivers, Printers and anything else MUST be installed in 64 bit versions. This includes what ever dependencies your UFL has, they too must also support 64 bit platform.
NO Additional requirements to be done or used for 64 bit WEB applciations, just requires IIS App Pool to be run in 64 bit mode and all dependencies available in 64 bits. ODBC DSN is created using the 64 bit ODBC Administrator, Printers support 64 bit applications.
And your UFL and any of it's dependencies must be located in as well as GAC'd if it's required, once again check with your UFL developer:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64
I suggest you purchase a support case and work with one of our Rep's to sort this out.
http://store.businessobjects.com/store/bobjamer/en_US/DisplayCategoryProductListPage&CategoryID=55987300
Don
Edited by: Don Williams on Oct 20, 2011 1:35 PM

Memory full - error when open a Peoplesoft crystal report 9/10

Post Author: damisetty
CA Forum: General
Greetings!
We are gettign Memory Full error when open few of the delivered crystal reports. We are using Crystal 9 bundled with peoplesoft, i tried to open with Crystal 10, but same error.
Could any one help me out?
Thanks in advance.
Naga

Are you a Developer or QA or end user? Have you discussed this with your Developer at all? We seem to keep going around in circles. Your Developer should know what he did and how to deploy your app and CR assemblies and what to use.
Subject line is VS 2010, CR for VS 2010 is the only version supported in VS 2010. CR 2008 doesn't have 64 bit runtime. therefore it's not an option, your WEB Servers app pool MUST run in 32 bit mode only if you are using CR 2008.
"If I install the 64 bit version of SAP CR. Should the assembly change in the aspx files? different version number?" Nothing in your app, just deploy the 64 bit runtime and set your app pool to run in 64 bit mode.
If you are using CR for VS 2010 then you can run your WEB server in 64 bit mode and use CR for VS 2010 64 redist files on your WEB server. Then all DB Drivers, Printers and anything else MUST be installed in 64 bit versions. This includes what ever dependencies your UFL has, they too must also support 64 bit platform.
NO Additional requirements to be done or used for 64 bit WEB applciations, just requires IIS App Pool to be run in 64 bit mode and all dependencies available in 64 bits. ODBC DSN is created using the 64 bit ODBC Administrator, Printers support 64 bit applications.
And your UFL and any of it's dependencies must be located in as well as GAC'd if it's required, once again check with your UFL developer:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64
I suggest you purchase a support case and work with one of our Rep's to sort this out.
http://store.businessobjects.com/store/bobjamer/en_US/DisplayCategoryProductListPage&CategoryID=55987300
Don
Edited by: Don Williams on Oct 20, 2011 1:35 PM

X6 mass memory full error

I want to copy some MP3 files to the X6 phone mass memory through windows explorer but it give me a memory full error message.
Before I start to copy, it indicated 8.40G free out of 15.0G (not sure why it is 15G), but once I start to copy, it pops up the error message. I disconnect the phone and use the phone file manager to check and it has about 8.4G free. Try it again, the same happened.
While in windows explorer it indicated it is full full, under the ovi suite->view->device information, it has 8,4G free! I know I have the space because I deleted a lot of files recently.
Firmware: V21.0.004. OS: Windows 7

I received an email from Nokia support about the issue however unfortunately their advice was useless...
I will copy/paste it here in-case it might be useful to anyone else.
Thank you for contacting Nokia Care.
We sincerely apologise for any inconvenience this issue may have caused you. In response to your concern with your device, the phone notifies you if the phone memory is getting low.
To free phone memory, transfer data to a mass memory in the File mgr application. Mark files to be moved, select Move to folder (or Organise > Move to folder) and then the destination folder.
In order to free memory, you could also remove or move the following:
a. Messages from Inbox, Drafts and Sent folders in Messaging
b. Retrieved e-mail messages from the phone memory Saved Web pages. Clear the web browser cache to free some memory.
c. Saved images, videos, or sound files
d.Contact information
e.Calendar notes
f.Downloaded application packages
g.If there are applications which are not needed any more, uninstall them
h.Any other data that you no longer need
If possible, use the mass memory instead of phone memory in the Camera application. You can also use Image Store available in the Nokia PC Suite or Ovi Suite to transfer images and video clips for example to a compatible PC.
If you are deleting multiple items and any of the following notes are shown: Not enough memory to perform operation. Delete some data first or Memory low. Delete some data, try deleting items one by one (starting from the smallest item).
For future reference, please feel free to check our website. Kindly refer to the link below:
http://www.nokia.co.uk/home
You may also call our Customer Care Hotline at 0845 -045-5555,
Mon-Fri 9am - 7pm (except bank and public holidays)
Please do not hesitate to contact us again if you have any questions.
Yours sincerely,
Jacklyn B.
Nokia Service Professional
UK & Ireland Team
Nokia Care

Memory full error when trying to access 'access po...

Hi *,
I am using the wlan feature of my lovely e70 quite a lot. Therefore I have quite a lot off access points defined. Now I try to go to the 'access points' and I get a memory full error.
About a month ago I updated to 3.0633.09.04 (german). With 2.x I had the same problem - after a while of filling up the list I could not access it anymore, even to delete entries.
Any ideas on how to proceed? External tools?
Cheers,
Joerg

The error happened because you have defined or accessed a large number of access points with the device. I tend to access a large number of different AP's with my E65's WiFi. Details of each WiFi or edge or hsdpa access point you connect to is stored in that list. Hence, I got this error once.
I got out of that mess by doing the following:-
1. Go to web browser settings
2. In "access point" select "user defined"
3. Then, the device will provide you with a list of all the access points you have defined and ask you to select the default access point.
4. At this point, you can start deleting some of the access points. (Options -> Delete after selecting any ap in the list)
5. After you have deleted some of the access points, you won't have the memory full error you encountered.
This is certainly an inconvenience. One way to avoid this issue is to manually pare down the access point list once in a while. Delete some of the access points that you use very infrequently or never again.

Memory full error with printing pdf

Occasionally I get a memory full error with printing pdf (Cmd-P - then use save PDF on lower left dialog screen). This is when just printing a few pages.
Why Am I getting this and how can I fix this?

I am not sure why but I have noticed some Adobe products when used to convert html documents (web pages) to pdf, can produce very large files.
Try using Apple's Preview to see if those 'memory full' messages still occur.
I am presuming you have plenty of free hard drive space and also sufficient RAM so suggesting it is an application bug about memory that is at issue and not actually a lack of physical memory.

Memory full error on Crystal 11

We are facing "Memory full" error on some of our reports when we run on our server.
Server: windows 2003
Application used for input parameters: vb6
Crystal product: Crystal 11
What might be wrong with the application?

Hi
Please let us know the following details:
1) Is it possible for you to run the report(s) in a Crystal Reports stand-alone application.(If yes then what is the observation).
2)Exactly at what instance do you get this error.
3) Is this hapenning for the first time.

Web Intelligence server busy

Hi,
When we are running webi reports (on top of SAP BW), we receive sometimes the following error message:
"ERR_WIS_30284: the web intelligence server is busy".
I checked in OSS and on SDN, but didn't find any solution.
Has anyone an Idea to fix the issue?
THank you,
Gabriel

Gabriel,
I checked on the SAP Tech Support site and found the below (link) note as a possible explanation for receiving the ERR_WIS_30284 notice:
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3133323134353826]
Thanks,
John

Memory full error

I'm getting "memory full error" during generation of report. CR version is 8.5. The report contains 2 sub reports. Can anyone suggest what exactly the problem is and what could be the solution ... ??
Thanks in advance ...

And if you run the report int he Designer do you get the same error?
If not then what is the application doing when it gets the error?
What have you done to debug the issue?
Yes, getting the same error in designer also. My application is actually passing data to CR for some inventory related display. The report contains 3 sub reports linked with main report. I'm debugging all the sub reports as I doubt that it can be bcoz of one of the sub reports. Will check and update you ...

Unexplainable MEMORY FULL error in 8.2

Alright, I finally got my client to take a look at LV 8.2 (we've been on LV 7.0 for 3 years).
So I have it running in Evaluation mode (we haven't purchased it yet).
I'm running in WinXP Pro/SP2 under Virtual PC 7.0 on a 2x2GHz G5 Power Mac.
The program works perfectly on LV 7, on a real Win2000 box, and on this Virtual PC setup.
The first time I try to run one of my programs in LV 8.2, I get this MEMORY FULL error.
It complains about the INITIALIZE ARRAY function. Notice that it's wired to the #SAMPLES control which is set to the highest I32 value possible (as a default condition). You might think that that's it - I'm trying to allocate 2+ gig of samples, and it just can't do it.
Here's the kicker:
The break point at INITIALIZE ARRAY did NOT get hit.
The break point at the CASE ouside of that did NOT get hit.
A break point at the CASE outside of that (not shown in this pic) did NOT get hit.
The FUNCTION control on the front panel is NOT set to INIT, but to "ShutDown", which SHOULD cause a different case to be executed.
A breakpoint at the parent's call to this VI DID get hit. But if I step IN from there, the first step stops at the WHILE loop, the next step hits the error.
This VI is not re-entrant, or any other weird setting.
In other words, it appears to be executing the wrong case.
This is my first try on LV 8.x, so maybe I'm missing something. Is it trying to be "helpful" and warn me about what it thinks are future problems?
Why is it executing the wrong case?
Message Edited by CoastalMaineBird on 11-16-2006 07:16 PM
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks
Attachments:
Picture 2.png ‏101 KB

Alright - here's the bug - the stupidest thing I've ever seen from LabVIEW.
This library is in LV 7.0 - it works perfectly in LabVIEW 7.
But in LabVIEw 8.2, in SPITE of the fact that I call it with a function of SHUTDOWN, it insists on complaining about the code that I DON'T EXECUTE.
Run the BUG CALLER and see for yourself.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks
Attachments:
LV82Bug.llb ‏22 KB

XI3.0-WEB INTELLIGENCE SERVER MEMORY FULL - ERROR (WIS -30280)

Similar Messages

Maybe you are looking for