XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION
Dear All,
My SOAP receiver communication channel in production server has the following error:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error.
I am in process of finding the root cause for the issue.
I welcome your suggestions.
Regards,
Venu V
Hi,
Yes the channel was working fine. I have contacted the target system ppl. They are saying that they did not receive any messages. To resend the messages my channel should work without errors rt then only I can process.
Does it a problem of network or issue with the WS?
Thanks & Regards,
Venu V
Similar Messages
-
Hi there,
I am trying to publish a file from SAP as web service using XI and SOAP Adapter.
I am using ABAP proxy to get the data into XI.
Designing and Configuration in XI has no problems because when i use File adapter the data is trasmitted to FTP server.
But when I used SOAP Reciever adapter I am getting following error in RWB
Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Error during parsing of SOAP header.
<b>Scenario</b>: SAP ABAP Proxy -> XI -> WebService. Asynchronous.
<b>SOAP</b> Receiver adaptor.
<b>Target URL</b> http://<host>:<port number >/sap/xi/engine?type=entry&version=3.0&Sender.Service=SAPDC2653&Interface=urn:bzttest:00:hsa:test%5EOB_MI_BZT_TEST&QualityOfService=ExactlyOnce
Do not use SOAP Envelop is checked.
<b>SOAP Action</b> http://sap.com/xi/WebService/soap1.1
What i am missing here? How should I solve this problem?
Any help is appreciated,
Thx,
YogiSay there's a bapi/rfc that you want to call on an R/3 backend (e.g. 4.6c). On it's own, the R/3 system cannot expose the rfc/bapi as a web service, but XI can. So in this case, the scenario would be:
WS client -> XI -> R/3
When XI "exposes" a web service, it is exposing a service for a receiving system (in the above example, the R/3 system). XI itself does not provide or contain the service implementation. When XI exposes a web service, it is always done via the <b>sender</b> soap adapter (i.e. if soap adapter is used). Receiver soap adapter is used to call or consume an actual web service from an external application.
Regards,
Jin -
XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request
Hi,
We are doing File to WCF Scenario( SOAP ). I am trying to post the Data to WCf usingf SOAP Reciver Adapter.
Getting the Following error.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request
Thanks in advance>>> Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request
Answer: Use the third party wsdl in SOAP UI or any soap client tool and send the request and see the response. The problem here is the message structure mismatch between your request to the webservice and webservice expecting...
Possible 2 reasons:
1) You are not creating the target message based on the wsdl structure or not configured soap receiver properly.
or
2 ) Your wsdl is not latest or updated one or some changes have happened in the third party webservice hosting side. -
XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 404 Not Found
Hi,
The scenario is ECC-XI-SOAP(Asynchronous). We are getting the below mentioned error in SOAP reciver channel:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 404 Not Found
Channel Configuration:
Target URL:
http://<hostname>:<port>/bpm/com/xyzprocess/SomeIntermediateEvent?wsdl=binding&mode=ws_policy
Tried with
http://<hostname>:<port>/bpm/com/xyzprocess/SomeIntermediateEvent as well
Conversion parameters:
Checked Do Not Use Soap Envelope
Appreciate any help in this regards.
Regards,
VishalCan you share with us the HTTP Headers for the Request?
POST http://server/sap/xi/engine?type=entry&version=3.0&Sender.Service=BusService&Interface=http://company.com/abc/CommonAck%5EMI_CommonAck_ia HTTP/1.1
Accept-Encoding: gzip,deflate
Content-Type: text/xml;charset=UTF-8
SOAPAction: "http://sap.com/xi/WebService/soap1.1"
User-Agent: Jakarta Commons-HttpClient/3.1
Host: server
Content-Length: 560
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xir="http://www.dummy.org/response/">
<soapenv:Header/>
<soapenv:Body>
<xir:responseInput>
<Id>007</Id>
<Flag>10</Flag>
</xir:responseInput>
</soapenv:Body>
</soapenv:Envelope>
You can use the MessageTransformBean to correct the content type.
Thanks for the suggestion Mark.I am using MessageTransformBean but still the same issue.
Parameter Name:Transform.ContentType
Parameter Value:text/xml;charset=utf-8
Edited by: Vishal.P.Kulkarni on Oct 17, 2011 6:27 AM
Edited by: Vishal.P.Kulkarni on Oct 17, 2011 6:29 AM -
XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
I'm getting this message in RWB when trying to send an order:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
Weird thing is, other orders have been successfully to the same partner.
Is this something on my side or the receivers side?
What does HTTP 500 Internal Server Error mean and how to fix?
Thanks,
JeffMore info on this problem:
Discovered that the HTTP 500 error only occurs when a "change" file is sent:
I send an order create file to a partner using a SOAP adapter. They receive it successfully.
I make a change to the sales order and send that file. It uses the same Config Scenario, receiver determination, receiver agreement and comm. Channel.
But this file shows an HTTP 500 error in the RWB.
I send it right after the first order create file, so no overloading is happening, etc.
Conenctivity to the url is fine because the create file went through.
I don't know what else it could be. Any other info/log in RWB to look at to help decipher the error? -
XIAdapter/HTTP/ADAPTER.HTTP_EXCEPT
Hi,
we are getting the following exception when calling a soap webservice via XI.
SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 302 Found
we have already searched existing threads but didn't find any useful hints.
can anybody give us advice what might be wrong ?
best regardsHi Max Übele
Error code 302 stands for Moved Temporarily
This code is a temporary redirect to a new location. Apparently, many user agents always issue GET requests for the new URI, regardless of the original request method. This action violates even the older HTTP RFCs (1945 and 2068), but has become the expected behavior. RFC 2616 added two new status codes, 303 and 307, to ``fix'' this problem.
for more details on error code follow the link
http://www.web-cache.com/Writings/http-status-codes.html
Thanks
sandeep sharma
PS ; if helpful kindly reward points -
Hello All,
We have scenario proxy->pi->webservice. In older versions of PI system they used wsrm adapter at receiver side and it's working fine.
Receiver interface is asynchronous. So no response structute is present and receiver service is business component(since receiver is a third party).
During migration, we have replaced the receiver adapter with SOAP adapter and used message protocol as SOAP 1.1 but the message is failing and in communication channel it is showing error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error". In this case the receiver interface is stateless xi 3.0 compatible(re using the old), after changing it to just stateless also issue persists.
In target url field if i prefix the url with "http" then above mentioned error is occurring otherwise if i use the hostname:port/path.. then it is giving error
"soap: Call failed: com.sap.aii.af.sdk.xi.srt.BubbleException: Unsupported protocol". So maintaing the url as http://hostname:port/pat.....
As in old channel wsrm channel there is no userid and password, i haven't given any userid/pwd in receiver channel.
used the bean sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean with parameters
Module Key = soap
Parameter Name = noSOAPMakeSysErrFromResponseFault
Parameter Value = false
and
xmbws.No SOAPIgnoreStatus = true
but not successful.
Please help me. I got stcuk here.Hello Jannus,
The connectivity is working fine. Network team has confirmed it. I doubt that any strucutre(header) difference might be present in message when sending with wsrm adapter compared to sending with soap adapter.
Please let me know the exact difference between soap and wsrm functionality in receiving end.
By considering the structure issue, i have checked the "do not use soap envelope" check box, then i got error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Unsupported Media Type"
Then i used message transform bean, but not successful.
Regards,
Ch.Venkat. -
ADAPTER.HTTP_EXCEPTION - HTTP 415 Unsupported Media Type
Hi All,
We have a Proxy to SOAP scenario which is throwing the below response.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Inbound Message
-->
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Unsupported Media Type</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
We have used XSLT mapping and also used the Message transform bean (ocalejbs/AF_Modules/MessageTransformBean) with the module parameters.
Please help.this is the Audit log... Just in case this helps..
20.10.2011 09:57:34 Information Transform: successfully transformed
20.10.2011 09:57:34 Information MP: processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
20.10.2011 09:57:34 Information SOAP: request message entering the adapter with user J2EE_GUEST
20.10.2011 09:57:34 Information SOAP: completed the processing
20.10.2011 09:57:34 Information SOAP: continuing to response message 765df5dd-fb23-11e0-a52b-0000124b6826
20.10.2011 09:57:34 Error SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
20.10.2011 09:57:34 Error MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
20.10.2011 09:57:34 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
20.10.2011 09:57:34 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error. Setting message to status failed.
20.10.2011 09:57:34 Error The message status was set to FAIL. -
ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad request
Hi Folks ,
Error : "com.sap.aii.af.ra.ms.api.DeliveryException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad request"
Scenario : Webservice --> XI (ccBPM) -->SAP (By verfying the response from SAP and if the data holds any error it will sends mail to SAP & webservice Admin thru mail Adapter)
1. Webservice will send the update Message to ccBPM asynchronously via XML Gateway
2. ccBPM will call RFC on SAP R/3 synchronously.
3. If R/3 response contains an application error XI will send the error message to SAP and Webservice administrators using Mail Adapter
As per our analyzation error might be if the target message is not creating based on the wsdl structure or if soap receiver not configured properly.
Could you please let me know the actual root cause and suggest me the solution ..
Thanks in Advance..
Regards,
SekharHello,
This error is for SAP PI,
Please post it in the under PI in NetWeaver Forum, for quick replies.
Regards,
Abhishek -
ADAPTER.HTTP_EXCEPTION & HTTP 500 Internal Server Error
Hi,
I am working RFC-TO-SOAP(Synchronous scenario) when I try to test this scenario from SE37 using rfc destination I am getting the below error.(from SOAP Response)
In SXMB_MONI the below error is coming...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Inbound Message
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="HTTP">ADAPTER.HTTP_EXCEPTION</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>HTTP 500 Internal Server Error</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
same scenario when I try to test from Component monitoring in RWB using sender RFC request payload I am getting the response from webservice. It is showing successfullly messages in SXMB_MONI.
I have created TCP/IP Connection that is working fine..
Please can any body through light on this error.
Regards,
Venu.Hi,
Request message is going to webservice when response is coming back from webservice it is giving me error.
Response Meg ID.
Inbound Message -> Here is the error.
In Response Inboun level it is failing.
RFC sender side adapter right - Yes and I am getting the RFC Request message in SXMB_MONI also the same Request message If test from RWB I am able to see success messages in SXMB_MONI.
Regards,
Venu. -
ADAPTER.HTTP_EXCEPTION / HTTP 302 Moved Temporarily
Hello all,
I have an RFC->XI->Web Service (SOAP) synchronous scenario.
I'm trying to send a message from the the RFC, and in the message monitoring (SXMB_MONI) I'm getting this error message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Inbound Message
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="HTTP">ADAPTER.HTTP_EXCEPTION</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>HTTP 302 Moved Temporarily</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Does anyone knows what migth be happening?
Thanks in advance.
FelipeHello everyone,
Over a year ago I posted this issue. And I was never able to solve it. Now that I'm actually needing to do an interface of this kind, I cant find the solution.
The Web Service that I'm trying to invoke it is outside the LOCAL AREA NETWORK.
Please any ideas on how to solve this?
Thanks,
Felipe -
SOAP Channel - ADAPTER.HTTP_EXCEPTION
Hi,
I have a receiver SOAP Channel and when i tried sending messages.
Am getting an adapter exception.
Please guide if someone has faced with the same kind of error
Thanks
Sebin
The error response is pasted below.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Inbound Message
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="HTTP">ADAPTER.HTTP_EXCEPTION</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>HTTP 401 Access Denied</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
Sebinhi
Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
Description: The request requires user authentication
Possible Tips:
Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
If the error is in Adapter Engine
then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
May be wrong password for user XIISUSER
May be wrong password for user XIAFUSER
for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
source :: /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
regards
Ramesh P -
ADAPTER.HTTP_EXCEPTION, HTTP 500 Internal Server Error, in Receiver soap A
Greetings All,
In my scenario i am calling external service of SFDC using receiver soap adapter but i am facing below error in the response.
ADAPTER.HTTP_EXCEPTION, HTTP 500 Internal Server Error
I am creating the soap structure/envelope using Java mapping since need to add additional parameter in soap header.
I am setting the URL in java UDF using parameter TServerLocation.
In comm channel checked "do not use soap envlope" also set the format to text/xml using MessageTransformBean.
The service was working fine when tested in SoapUI tool.
Looking forword for your help and will be appreciated.
Thanks,
SandipHello Sandip, I hope you are doing fine!
I`m not sure if you are using a sync or async scenario...
The behavior that you describe is the expected behavior for SOAP receiver adapter in nosoap mode, asynchronous case.
The explanation that lies behind it is that in nosoap mode the bahavior is just similar to pure HTTP communication. An HTTP 4/5 error received from the target server is treated as HTTP internal error and logged into AFW as an error. The message in an asynchronous scenario without acknowledgements is normally seen as successful on IE side as it is successfully sent to the target system. It can be even successfully consumed by the target webservice, but for amo other reason, the HTTP request from SAP PI to the target system returns HTTP 500 error.
If you ask for system delivery acknowledgements, you should get a non-successful delivery acknowledgement.
In synchrnous scenarios, when a response is expected, the behavior is different.
If this is a sync scenario, there is an official patch released on the service marketplace. SAP Note 1533195 is released.
In addition to deploying the patch, apply the additional configuration steps. As per this note, for the default module
sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
you will need to set:
Module Key = soap
Parameter Name = noSOAPMakeSysErrFromResponseFault
Parameter Value = false
If you need to bypass the HTTP errors in the communication with the target system, you need to apply note 1055678.
To apply it, just add for the default module
sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean in your receiver
channel, Modules tab the following:
Module Key = soap
Parameter Name = XMBWS.NoSOAPIgnoreStatusCode
Parameter Value = false
If you need any SOAP fault related behavior or any other SOAP related feature, you should setup the channel to run normal SOAP mode, since as already mentioned nosoap mode is used now.
In addition, check note:
856597 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 SOAP Adapter
section "1. Sender Connection"
Q: I get a server error "500 Internal Servler Error" from the
adapter's servlet. What went wrong?
and get the trace to give you more details of the error.
One more thing, VERY IMPORTANT.
I STRONLGY recommend you to update all XI-PI components to latest patch available in the Service Marketplace. Thery are:
XITOOLS, XIESR, XIAF, XIAFC, MESSAGING, XIGUI. Some of them might not be present depending on the release of you system. e.g: 3.0, 7.0, 7.1
I hope this helps you.
Cheers
Jorge Eidelwein -
Hi all
Could you please to help. I need to use receiver with HTTP adapter which in this adapter that I need to pass dynamic URL into this. I had try follow this document
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm
but when I test it I got this error
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER"><b>ATTRIBUTE_MISSING_URL</b></SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Dynamic Header - Missing Message Attributes: URL/HTTP Destination</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
I think my XML source message format that is incorrect. This is my XML source message
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_OB xmlns:ns0="http://xxxx.com:db6">
<type>
<TargetURL>http://xx.xx.xx.xx</TargetURL>
</type>
</ns0:MT_OB>
Could you please to suggest.
Thanks
ParkHi,
Use the UDF in mapping to create the dynamic URL.
DynamicConfigurationKey keyURL = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/HTTP", <b>XXXXX</b>);
// access dynamic configuration
DynamicConfiguration conf = (DynamicConfiguration) param.get (StreamTransformationConstants.DYNAMIC_CONFIGURATION);
// set value
conf.put(keyURL, url);
See the belowlinks
dynamic URL - adapter specific properties (http receiver adapter)
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Regards
Chilla -
XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault
Hi Experts,
I am trying to create a scenario SOAP to SOAP through AAE. There is no mapping involved.
Sender is a 3rd Party application and receiver is SAP BusinessObjects [BI].
Following error is coming when posting the message from SOAPUI or through integration engine.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: String index out of range: 0
I have done following workaround.
1) I tried the message flow through AAE, but same error in the channel
2) I checked creating a one to one mapping with soap fault message. Still the same error.
3) "XMBWS.NoSOAPIgnoreStatusCode = true" in module tab -> Module configuration
When I tried this mentioned option, the message is passing through the channel but the passing blank empty payload.
I have checked following links.
http://forums.sdn.sap.com/thread.jspa?threadID=156305
http://forums.sdn.sap.com/thread.jspa?threadID=2111959
http://forums.sdn.sap.com/thread.jspa?threadID=1675917&tstart=0
Any pointers on this subject will be very much helpful
Thanks
Ray..Hello,
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: String index out of range: 0
When I tried this mentioned option, the message is passing through the channel but the passing blank empty payload.
Probably because the return is blank. If this is expected, can you just use Java Mapping to parse the blank response?
Hope this helps,
Mark
Maybe you are looking for
-
Issue with a load from R3 to BW 3.5
Hi Guys, We are having an issue here with a load from R3 to BW 3.5 to an ODS and a transactional infocube. In a daily basis we are running loads to BW from R/3 infosets and all of them but one loads fine. The one that is having problems is actually t
-
Pages 5.5 different first page template
Hello, In Pages 4.3 I was able to create a template with different first page header and footer (just create 2 page document, manage headers and footers, then delete body text and save as template). Well, in Pages 5.5 I have problem with that. OK, it
-
Syncing MacBook Pro, iPad, iPhone
MacBook Pro runs OSX Mountain Lion. Pages is the program I use most often. Ordered an iPad w/ Retina Display and it will arrive Wednesday. Looking for tips and hints on how to optimally sync my devices. For example I would like to be typing a documen
-
How can I transfer my Voice Memo (47 min) from Iphone to computer (pc)?
I have tried to connect my Iphone to my pc and open Itunes, but the Voice Memo doesn't turn up in Itunes. I'm afraid I can lost my Voice Memo if I syncronise. Can I use Icloud or Dropbox? I really need help since I have an interview on my phone and n
-
Retreive leave request details in PT_TIMREQ
Hi, I am working on the standard leave request workflow (PT_TIMREQ) and I would like to add a complmentary functionality that sends email notifications to the manager's assistant. I need to retreive the leave request details from the workflow contain