Xine fullscreen CPU at 100%

Hi,
When i watch a movie or myepisodes my xine races my cpu to 100%.
I have tried other video drivers in xine but nontheless.
Some info you guys might need:
- WM: Openbox
- Dual Monitor Setup whit following screens:
a. Samsung Syncmaster 940nw
b. Neovo F-419
lspci -v
02:00.0 VGA Compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
Xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "record"
Load "dri2"
Load "dbe"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 410 260 # mm
Identifier "Monitor0"
VendorName "SAM"
ModelName "SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
Option "PreferredMode" "1440x900"
Option "Primary" "True"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "AGNeovo"
ModelName "F-419"
HorizSync 24-80
VertRefresh 49-75
Option "DMPS"
Option "LeftOf" "Monitor0"
Option "PreferredMode" "1280x1024"
Option "Primary" "False"
EndSection
Section "Device"
Identifier "RV100"
Driver "radeon"
BusID "PCI:2:0:0"
Option "Monitor-VGA-0" "Monitor0"
Option "Monitor-DVI-0" "Monitor1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "syncm"
SubSection "Display"
Modes "1280x1024" "1440x900"
Depth 24
Virtual 2720 1024
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
xrandr
Screen 0: minimum 320 x 200, current 2720 x 1024, maximum 4096 x 4096
VGA-0 connected 1440x900+1280+0 (normal left inverted right x axis y axis) 410mm x 257mm
1440x900 59.9*+ 75.0
1280x1024 75.0 60.0
1280x960 60.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
DVI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 375mm x 301mm
1280x1024 60.0*+ 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
S-video disconnected (normal left inverted right x axis y axis)
I hope this is enough to go on.

Not sure if it supports it i've seen ubuntu forums use them and they worked. Not sure if this counts.
Just made this linux box 2 weeks ago it has happend since the start.
Wel cat /proc/cpuinfo gives me:
redostrike ~ $ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.00GHz
stepping : 4
cpu MHz : 1992.410
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm up pebs bts
bogomips : 3986.85
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 32 bits virtual
power management:
Not the best one out there but still it should run good.
vlc, mplayer are even worse the have lots of lags. Havent tried gstreamer yet will look into that.
I've been tweaking my xorg.conf a bit and now i can get a larger screen out of it but the cpu still goes to 100%.
This is the Device section now.
Section "Device"
Identifier "ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]"
Driver "radeon"
Option "ColorTiling" "On"
Option "EnablePageFlip" "On"
Option "DisplayPriority" "BIOS"
Option "RenderAccel" "On"
Option "AccelMethod" "XAA"
Option "XAANoOffScreenPixMaps"
Option "AGPMode" "8"
BusID "PCI:2:0:0"
Option "Monitor-VGA-0" "Monitor0"
Option "Monitor-DVI-0" "Monitor1"
EndSection

Similar Messages

Oracle Database 11.2.0.1.0 CPU hit 100% on Windows 2008 R2 64 bit Hyper-V

Oracle Environment Detail:
Oracle Database Enterprise Edition :11.2.0.1.0 (NON RAC, No failsafe)
O/S:     Windows 2008 R2 64 bit (6.1)
Specifics: Virtual Server using Hyper-V
Memory: 9 GB RAM
Processor: E5540
Specific about the issue:
I have two database instance created on this server with ‘memory_target=3600M’ each.
I am getting into an issue where I find NO activity on database except regular schedule job running using DBMS_SCHEDULER –
•     Database FULL export DAILY schedule time 7 & 7:30 PM accordingly for both instance (takes about 15-20 mins each)
•     Database FULL RMAN DAILY schedule time 9 & 10 PM accordingly for both instance (takes about 35-40 mins each)
This was set up on Feb 25th 2011. Since then we have encounter CPU hit 100% TWICE in this system at around 8:30 PM (SAME TIME). Both database instance exports keep running and never finish. While RMAN schedule job has NO problem. Mostly everything runs every smoothly without any issue.
Replicate the issue:
I am unable to replicate this issue and do not know the cause of the issue.
Work Around:
Oracle services shutdown/Server reboot.
Would anyone know about this issue? Have any information could help? This system will become production soon and want to make sure we have solution for this.
Thanks in advance!

I am finding that CPU hit 100% is very specific to Oracle 11.2.0.1.0 Export Utility (exp) used to take FULL database export. I understand Original Export is desupported from general use as of 11g but available for specific need.
Have anyone faced this issue with 11.2.0.1.0 Export Utility (exp)? Please help.
I have a need to use export utility which gives us migration options.
Thanks!

XP mode on Win7 Pro x64, windows xp update/svchost pushes CPU to 100% in virtual machine.

Installed xp mode on a win7 pro, dell 490 with xeon cpu. The install goes without error, win xp virtual machine loads nicely, I do not enable updates at the config during 1st startup. When Automatic update is enabled later control panel shows svchost is
pushing the cpu to 100% and the update never completes.

Hi,
1. try to run XP in safe mode by F8
2. then change Automatic update service to Manual or Disable.
3.boot XP into normal mode and see weather its still 100%.
thanks
How do you start safe mode when running XP Mode in Win 7? When you start XP Mode, the BIOS is hidden. By the time the XP Mode window comes up, its already loading the Windows desktop.

TS1717 I can't access Itunes Store via my Itunes. When Itunes start, CPU always 100%, I've tried uninstall and reinstall Itunes but it seems to be useless. Please help !!!

I can't access Itunes Store via my Itunes. When Itunes start, CPU always 100%, I've tried uninstall and reinstall Itunes but it seems to be useless. Please help !!!

I can't access Itunes Store via my Itunes.
Is iTunes endlessly saying "Accessing iTunes Store"? Or is something a bit different going on?

Evenlog viewing causes CPU usage 100% on Windows server 2008 SP2

We have Windows server 2008 SP2 with strange behaviour. When I scroll down events in eventlog viewer CPU usage hits 100% and eventlog viewer freeze. CPU usage is split between 2 processes SVCHOST.EXE (lmhosts, eventlog and Dhcp services) and MMC.EXE.
1)I tried to replace eventlog files with new ones. That didn’t helped
2)After server clean boot problem still exist.
3)When CPU hits 100% usage process explorer shows that from SVCHOST.EXE process CPU is used by service EventLog.
Any ideas how to fix this?

Hi Santosh
I re-installed VMware
tools and also configured VMXNET 3 - nothing changed :(
Sorry to hear that.
Windows event log service has couple of dependencies i.e. task scheduler and windows event collector service. Can try restrating those services ?
In addition to above, try following steps
Change NTFS permission of %WINDIR%\System32\WinEvt\Logs directory, add Local Service and
Network Service, give them FULL permissions.
Stop and Start event viewer service by running following command
net stop eventlog && net start eventlog
Issues like this might occur if the disk (FC or iSCSI SAN or even NAS) has some inconsistencies , this is true in case of both physical and virtual machines
You might want to try running chkdisk as well on the server in question
http://technet.microsoft.com/en-us/library/cc730714(v=ws.10).aspx
If nothing helps, try inplace upgrade of the Operating system as an last option.
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099
Thanks
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here are my own.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.

Flash player 11 is very glitchy on ALL browsers and makes my CPU usage 100%,Streaming media headache

flash player 11 is very glitchy on ALL browsers and makes my CPU usage 100%, making all youtube and pandora or any streaming media a headache, i have a low-end but good quality Emachine with Windows 7 Sv pk. 1, AMD Athalon Processor 2650e 1.6 GHz 2GB ram 32-bit, which isn't that bad, it used to play HD videos and everything without a skip or lag, it is virus clean, and clean of any large bulky programs, the only thing that went wrong was the fact that the adobe flash updates slowly but surely made it worse, AND it will not let me roll-back to an older version anymore like it used to, so WTF is up? no one seems to have an answer for this, and it seems like ADOBE is doing everything in it's power to not let me ask this question or get it solved, maybe it's because I AM TOO SMART FOR IT AND KNOW IT'S A FAILURE. so please, anyone who actually has a degree in this field is welcome, but no BS anymore, i want answers.
[moved to Flash Player forum]
Message was edited by: sinious

The jump to FP11 was pretty significant with Stage3D. Now Flash Player has a lower level access to your computers GPU to offload playing video and 3d rendering to the GPU. However if your systems GPU isn't up to the task you really won't see that performance gain.
Enter H264 video decoding. A large segment of the Flash usage market is simply viewing video. For sites without fallback in mind (or don't mind software rendering fallback), video may suffer. Using the GPU accelerated video classes may make it difficult for your system to view playback. Disabling hardware acceleration as recommended above would revert you back to software (CPU) decoding to check if your system itself is the issue (and not all the new GPU additions). You did that yet you're still having an issue.
Just to clarify, as I have an eMachine (for accounting), your computer is very much in the "budget" margin. You have a 3 year old single core 1.6ghz AM2 CPU with 512kb of L2. That's the K8 series. This is a very underpowered, single thread loving CPU. Only the most optimized Flash sites and lower end videos (720p or below) should play, but I'm not even sure if they'll "play well". It depends on your GPU.
Also you should know they have an official list of unsupported chipsets and drivers based on many factors. Here's a list for FP11 and AIR3:
http://helpx.adobe.com/x-productkb/multi/stage3d-unsupported-chipsets-drivers-flash.html
Check the bottom of the screen to see what Flash is reporting your rendering mode is. For example, mine states:
Your gpu supports Stage3D in both Baseline and Constrained profile!
Baseline RenderMode:
DirectX9
Constrained RenderMode:
DirectX9 (Baseline Constrained)
This probably won't get better in the future for you. Flash is not a low end multimedia runtime. It does require and utilize high end hardware in a much more reliable way.

Problem - Playing media stops when CPU reaches 100%

Hi,
I have a big problem, I use JMF for playing my videos and music for my video game.
But if the CPU reaches 100 % the playing media stops and if the Processor is in the state less as 100% it continues playing.
But windows media player continues playing for some seconds after reaching 100%.
Would it help to increase the Buffer with BufferControl or is this a problem for Java?

You can't really compare JMF to the windows media player because your java app is undoubtedly doing other things at the same time as it's playing your music and videos. Win media player just has to worry about playing the video/music

X200 CPU reaches 100 celsius degrees. is this normal?

I'm using LenovoThinkVantage Toolbox to do a CPU stress test and and the same time I'm running TPFanControl to monitor the speed of the fan and the temperature of the CPU.
When I run the CPU stress test the temperature of the CPU reaches 100 degrees celcius with the fan going at 7000rpms which all of it sounds excessive and not right to me. Is this normal? or there is something wrong with my system.
Thanks in advance

100C is around the maximum the CPU can deal with before sustaining damage. Even then, running at that temperature for extended periods of time is most certainly going to be problematic.
I can't imagine it was designed to be run that way, so I'm guessing there's a problem. Maybe a heatsink is not seated properly, or something is obstructing airflow. Either way, I'd say that if you're under warranty it's worth having the depot take a look.

ASA 5545 NIPS CPU utilization 100%

Hi,
We are having two pair of NIPS SSP and working in Active and standby mode.
All four Devices (ASA 5545 and ASA 5525 SSP IPS) showing CPU utilization 100% on both active and standby devices.
Memory usage is also showing very highly utilized.
Kindly help me resovle this issue.
Regards,
Dheeraj

Hi Dheeraj,
I don't think this is an issue. CPU 100% utilization is reported on every IPS (appliance or ASA software module) and it should be normal.
If you want to see if your device is getting more traffic than it can process, you should look at inspection load.
I hope this will help and it would be nice if someone from Cisco team could reply to this.

TMG Microsoft Firewall Service Process (wspsrv.exe) high CPU. CPU Usage 100%

TMG Microsoft Firewall Service Process (wspsrv.exe) high CPU.
CPU Usage 100%
Please help me.
Thanks

Hi,
Since there can be multiple reasons for this issue, you can
capture a manual dump of the wspsrv.exe process on TMG server or find some related logs to better analyze this issue firstly.
In addition, what have you done before you encountered that issue?
If you have any third-party programs installed, you can temporary disable them and restart the firewall service to see if the issue persists.
For more detailed information, please refer to the links below:
How
to capture a manual dump of the wspsrv.exe process on TMG 2010?
Using
DebugDiag 1.2 to Automate Dump Analysis – TMG High CPU Utilization Scenario
Best regards,
Susie

T500 turns off after cpu goes 100% for some time

I welcome all useful feedback on the issue - please do test your laptops if you can
my T500 turns off after cpu goes 100% for some time, that is just another issue?
happens both in windows and linux
edit : it cannot be from dust - I remember this happened occasionally even it was brand new

This makes the fourth post to say: CLEAN OUT YOUR FAN.
So...
CLEAN OUT YOUR FAN.
Some compressed air does the trick. You can find the disassembly instructions here:
http://www-307.ibm.com/pc/support/site.wss/MIGR-70068.html
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

CPU runs 100% when logging with DAQmx using card 6229

Hi!
When I start a logging using DAQmx Analog Input the computer CPU runs 100%. This causes the problem that the computer locks and the subsequent steps in the program are left without computer CPU recourse. After the logging is compleet, 1750 samples/10 channels at 250Hz, the program runs on, but the loggfile is at that point useles.
I have instaled LV 7.1.1 and am using DAQ 7.4.
Anyone that recognizes this problem?
Regards,
Idriz
Idriz "Minnet" Zogaj, M.Sc. Engineering Physics
Memory Profesional
direct: +46 (0) - 734 32 00 10
http://www.zogaj.se

Hello Idriz!
I just wanted to respond here as well so you know that we have read your post on this very forum. Still waiting for an answer from the US and after that I will forward that information to you.
Regards,
Jimmie A.
Applications Engineer, National Instruments
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal

CPU usage 100%

Dear Sir,
This is regarding laptop model compaq 6720s showing cpu usage 100% even after reinstallation of OS & even after new hard drive connected to the same done with new os installtions. So it seems that any hardware issue with motherboard either CPU (Core 2 Duo 2.0 GHz
Regards
Nilesh Potabatti

Hi,
Do you know which process is the culprit ? Please try this:
Right click a blank space on Taskbar,
Click Start Task Manager,
Check in the Processes tab, which one uses high CPU and please post back.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

CPU hits 100% when I quit iTunes

Whenever I quit iTunes, the it pegs the CPU at 100% for 20 - 30 seconds. I've seen lots of people with CPU-hogging problems during podcast updates and ripping... anybody find an answer for this one?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Mac forums.
Regards.

CPU at 100% (HP DM1-4300sa)

In task manager my computer seems so run CPU at 100% a lot of the time with very few programmes enabled please help before i take it back to John Lewis.

Hello iceman2372. I understand your CPU is running at 100%.
First, you should determine which programs/processes are using your resources. Try the following.
Press CTRL+SHIFT+ESC. This combination opens the Task Manager.
Select the "Processes" tab.
Check the bottom left corner and ensure you're viewing processes from all users.
Click "CPU." This will arrange the processes in descending order.
List the processes which are using the most resources.
Another good step to take is to ensure that your system is free from viruses or malware. If you do not have an antivirus installed I suggest Microsoft Security Essentials. For malware I suggest running Malwarebytes. Make sure to post the results from both of these scans.
It may also be helpful to have your prodcut number. This document can show you where it is located.
I will await the result. I hope you have a great evening!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Xine fullscreen CPU at 100%

Similar Messages

Maybe you are looking for