Xine is green and slow

Hello
If I try to start a video with xine, the video has a green tone and is sloooooooooooooooooow. Same thing if I use codeine (which uses xine). Kaffeine (which AFAIK uses xine too) works without any problem...
I found an old thread with a broken link to the solution http://bbs.archlinux.org/viewtopic.php?id=40091 (Post 13)
Has anybody an idea what to do ?

Not sure. The only time that I've ever experienced a green screen problem with xine was when trying to play an mjpeg encoded file. Anyway, the web page linked from that post is still in Google's cache - search for "green xine and a pegged cpu" - and describes the process the author followed to install the correct x.org driver for his video card in place of the vesa driver. Maybe you need to get X sorted as a first step? Otherwise, a further web search indicates that xine can also green screen when playing .avi files that are over a certain size and when playing X264 encoded video.

Similar Messages

ITunes uses almost 100% of CPU and slows PC down

Recently I decided to start using my iPod touch 4G again and downloaded the latest version of iTunes.
Upon launch, iTunes acts normally until about 4-5 minutes of being open (just in idle). It then happily proceeds to use up 100% of my CPU load and slows my entire PC down to a halt, even once I've closed it (iTunes).
I've tried re-installing it, downloading a different version, disconnecting from the internet, practically everything and yet the problem persists.
My PC specs are as follows:
Amd FX Piledriver 8-Core FX-8350 @ 4.0GHz
Powercolour HD7990 Devil 13
G-Skill 1866Mhz 16Gb memory
OCZ Vector 128Gb HDD / WD Caviar Green 3TB
So I can assure you, this is NOT hardware related.
I've tried the following method with no results.
1) Click Start and type "cmd" (without the quotes) DO NOT press enter or Ok yet.
2) Right click "cmd" in the search results at the top of the start menu and select "Run as Administrator".
3) In the command window, type "netsh" and press enter. (Without the quotes)
4) In the next prompt, type "winsock" and press enter. (Without the quotes)
5) In the next prompt, type "reset" and press enter. (Without the quotes)
6) Reboot the PC. (Do not skip this step)
I've also been through the list of conflicting software and have none of the mentioned.
I'm running Windows 7 with the latest updates.
I'm getting extremely frustrated now. ANY help would be appreciated.

Sorry. I did a search, and a lot of threads came up. The one I chose, I thought, explained WHY it happened.
Maybe you'd get answers more helpful to you, if you went throught the search results.
Sorry I wasn't of any assistance.

Problem with unstable and slow SWFs

Good evening,
Some of my users are reporting problems with the SWF output of my intensive Captive file which includes significant software simulation. I knew that these files were going to be resource intensive due to the nature of the project, but I felt comfortable with system requirements of at least 2 gb RAM and a mid-range processor.
Unfortunately, some of my users who meet this criteria are reporting problems including text animations not playing in full and slow slide transitions. I cannot replicate this problem on any of my machines.
I have been playing around trying to compress images as much as possible and otherwise reduce file size. What else can be done? What are the top five things I can do to remedy this problem?
My presentation is about 50 slides and the SWF output is about 4.5 mb.
Thanks

I've seen this type of thing many times, especially in corporate environments.
My top suggestions:
If you've taken all reasonable steps to make your project as web-friendly as possible by this time, don't make any more changes to your project until you've exhausted the possibilities below. It is most likely NOT your project that is at fault.
Find out more details from the users that are complaining. If at all possible, actually go and sit with them to watch the behaviour they're talking about. Don't believe everything you hear.
Check that users are on the correct version of Flash Player. For example, Flash Player 10 can play significantly better than Flash 9.
Ask the user to check defragmentation on their PC. Most users DON'T know how to do this and never defragment. As a result, I have seen PCs in corporate IT environments that had not been defragmented in years. Their hard drive showed up mostly red when the fragmentation analysis was done. This lack of PC housekeeping can contribute to many issues, especially with Flash or multimedia playback. Ask the user to defragment 2 or 3 times to be on the safe side.
Watch the CPU on Task Manager while the PC is playing the Captivate presentation. The performance monitor should tell you if the CPU is struggling and unable to decode the content fast enough.
Try to have another user log onto the same machine using a different profile and see if they experience the same issues. This can tell you whether the issue is due to a corrupted user profile. Conversely, have the same user log onto a different machine, creating a new profile for themselves on that PC to see if they experience the same issue. If it seems to be their profile at fault, they may need to get some IT dude to blow away their profile and set it up afresh.
Check whether or not the issue could be due to server latency. This is especially the case where LMSs are involved. Users will often experience latency issues such as slow transitions from one quiz slide to the next because the course module has to wait for the LMS to respond before it can move forward. If this is occurring for a significant number of users, you can try using the optional SCORM template that only sends tracking data at the end of the module instead of all the way through.
In my experience, if 95% of your user base is playing the content without issue, you don't need to change anything. Chances are that whatever is going wrong for the few that are complaining about poor playback wouldn't necessarily improve no matter what you did to your project. In the vast majority of cases, you need to isolate what exactly is causing the issue for these users and correct it ON THEIR END.
Rod Ward
www.infosemantics.com.au
UPDATE: I just realised that a lot of this information would probably help others, so I created a blog post documenting these steps: http://www.infosemantics.com.au/debug_slow_playback

FIRE FOX IS GETTING SLOWER AND SLOWER LOADING PAGES I GO TO ONLINE. IT LOAD CIRCLE STOP SPINNING AND WILL START BACK BUT IT TAKES IT'S TIME TO DO SO. THIS HAS BEEN GOING ON THROUGH THE LAST SEVERAL UPGRADES.

FIRE FOX USED TO BE A FAST BROWSER BUT IT IS GETTING SLOWER AND SLOWER. THE BLUE-E IS ABOUT TO THE POINT OF BEING FASTER THEM THE FOX. I HAVE ALWAYS LIKE THE FOX, JUST WANT TO FIGURE OUT THE PROBLEM WITH IT AND THE LONGER I HAVE THE WINDOW OPEN ARE UP THE WORSE IT GETS. I DO A LOT OF GAMING ON FACEBOOK PLAYING MAFIA WARS BUT THE PROBLEM IS NOT LIMITED TO JUST THERE IT IS ALL THE TIME AND EVERY WHERE. I HAVE TRIED ADD-ON'S THINKING THEY MAY HELP BUT NOTHING HAS DONE ANY GOOD. CHROME IS TWICE IF NOT THREE
TIMES AS FAST AS THE FOX LATELY ON LOADING PAGES.

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

My browser takes minutes to open then when the tab is fully loaded it will start saying "Connecting" and slow down or freeze.

When I open my browser, it takes 3-5 minutes to fully open. When I get to a website, randomly the tab will say 'Connecting' and slow down and take 10-15 minutes to function or freeze completely. This almost always happens on sites that require Flash Player use. I have uninstalled and reinstalled my Flash several times. I've added memory, as someone suggested it was a memory issue. It's so frustrating, please help!

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

I am using laptop hitting and slow system not working

i am using laptop hitting and slow system not working and very late opan file browser every think . plez help me

Hi,
Shut down the notebook. Tap away at the esc key as you start the notebook to enter the Start-up Menu. Select the Bios option ( usually f10 ) and under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
Note: If the option to run these tests is not available in the Bios Menu, use the f2 diagnostic menu instead.
Can you also post back with the following details.
1. The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
2. The full version of the operating system you are using ( ie Windows 7 64bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Macbook Pro getting slower and slower, freezing all the time

Hi,
My early 2011 Macbook Pro is gettin slower and slower, and I'm pretty sure Mavericks only worsened the condition. This is my report, can someone help me on why this is happening?
Hardware Information:
          MacBook Pro (13-inch, Early 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.3 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
Startup Items:
          FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
System Software:
          OS X 10.9.1 (13B42) - Uptime: 1 day 1:28:0
Disk Information:
          TOSHIBA MK5059GSXP disk0 : (500,11 GB)
                    EFI (disk0s1) <not mounted>: 209,7 MB
                    Macintosh HD (disk0s2) /: 499,25 GB (54,63 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-898
USB Information:
          JMicron USB to ATA/ATAPI bridge 500,11 GB
                    EFI (disk2s1) <not mounted>: 209,7 MB
                    Filmes (disk2s2) /Volumes/Filmes: 499,76 GB (330,53 GB free)
          Apple Computer, Inc. IR Receiver
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. iPhone
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
          de.novamedia.driver.NMSmartplugSCSIDevice          (1.0.1)
          com.Cycling74.driver.Soundflower          (1.5.1)
          com.bresink.driver.BRESINKx86Monitoring          (8.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [loaded] com.oracle.java.Helper-Tool.plist
Launch Agents:
          [failed] com.brother.LOGINserver.plist
          [loaded] com.oracle.java.Java-Updater.plist
          [loaded] de.novamedia.VodafoneDeviceObserver.plist
User Launch Agents:
          [failed] com.akamai.single-user-client.plist
          [loaded] com.facebook.videochat.[redacted].plist
          [failed] com.google.GoogleContactSyncAgent.plist
          [loaded] com.macpaw.CleanMyMac.helperTool.plist
          [loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
          [loaded] com.spotify.webhelper.plist
          [loaded] com.valvesoftware.steamclean.plist
User Login Items:
          uHD-Agent
          GrowlHelperApp
          Alfred
          uTorrent
          Dropbox
          iShutdown
          HyperDock Helper
          Assistente de gestor de conteúdo
3rd Party Preference Panes:
          Akamai NetSession Preferences
          Fan Control
          Flash Player
          Flip4Mac WMV
          Growl
          HyperDock
          Java
Internet Plug-ins::
          DirectorShockwave: Version: 11.5.9r620
          o1dbrowserplugin: Version: 4.9.1.16010
          Unity Web Player: Version: UnityPlayer version 3.4.2f3 - SDK 10.5
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 2.3.8.1
          RealPlayer Plugin: Version: Unknown
          Silverlight: Version: 5.1.20913.0 - SDK 10.6
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
          Flash Player: Version: 11.9.900.170 - SDK 10.6
          QuickTime Plugin: Version: 7.7.3
          googletalkbrowserplugin: Version: 4.9.1.16010
          npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
          iPhotoPhotocast: Version: 7.0 - SDK 10.8
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
          JavaAppletPlugin: Version: Java 7 Update 45
Bad Fonts:
          None
Old applications:
          Content Manager Assistant:          Version: 1.10.4086.78 - SDK 10.5
                    /Users/duarte_cunharosa/Applications/CMA.app
          Content Manager Assistant:          Version: 1.10.4086.78 - SDK 10.5
                    /Applications/CMA.app
          FacebookVideoCalling:          Version: 1.2.0.157 - SDK 10.5
                    /Users/duarte_cunharosa/Library/Application Support/Facebook/video/1.2.0.158/FacebookVideoCalling.app
          Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
          Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
          Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
          Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
          Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Document Connection.app
          Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4
                    /Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
          Microsoft Excel:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Excel.app
          Microsoft Graph:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Graph.app
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
          Microsoft Outlook:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Outlook.app
          Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft PowerPoint.app
          Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4
                    /Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
          Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
          Microsoft Word:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Word.app
          Miro Video Converter:          Version: 2.6 - SDK 10.0
                    /Applications/Miro Video Converter.app
          My Day:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/My Day.app
          Open XML for Excel:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Open XML for Excel.app
          Plants vs:          Version: 1.0.40 - SDK 10.5
                    /Applications/Plants vs. Zombies.app
          RipIt:          Version: 1.6.2 - SDK 10.5
                    /Applications/RipIt.app
          SLLauncher:          Version: 1.0 - SDK 10.5
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          Solver:          Version: 1.0 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          SyncServicesAgent:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
          UPlayBrowser:          Version: 1.0.1.23853 - SDK 10.5
                    /Library/Application Support/Ubisoft/Assassin's Creed Brotherhood/UPlayBrowser.app
Time Machine:
          Mobile backups: ON
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 464.96 GB Disk used: 414.09 GB
          Destinations:
                    Time Machine [Local] (Last used)
                    Total size: 698.32 GB
                    Total number of backups: 3
                    Oldest backup: 2013-12-20 18:10:54 +0000
                    Last backup: 2013-12-22 19:52:17 +0000
                    Size of backup disk: Too small
                              Backup size 698.32 GB < (Disk used 414.09 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               9%          Transmission
               4%          Dropbox
               2%          WindowServer
               2%          Dock
               1%          Google Chrome
Top Processes by Memory:
          123 MB          Google Chrome
          119 MB          iTunes
          102 MB          Dropbox
          87 MB          Google Chrome Helper
          66 MB          Finder
Virtual Memory Statistics:
          148 MB          Free RAM
          995 MB          Active RAM
          859 MB          Inactive RAM
          1.03 GB          Wired RAM
          7.80 GB          Page-ins
          4.84 GB          Page-outs

If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on general principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as some other aspects of the configuration that may be related to the problem.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: In each of two steps, you copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is copy; paste; paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, use that.
Below are instructions to enter UNIX shell commands. They do nothing but produce human-readable output. However, you need to think carefully before running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(grep [^[:blank:]] "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; { system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(( $(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256 )); [[ $o -gt 1024 ]] && printf "\nPageouts: %s MiB\n" $o; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will beautomatically copied to the Clipboard. All you have to do is paste into a reply to this message by pressing command-Vagain. Please don't copy anything from the Terminal window. No typing is involved in this step.
Step 2
Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2>&- | pbcopy; echo $'\nStep 2 done'
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
You can then quit Terminal. Please note:
☞ Steps 1 and 2 are all copy-and-paste — type only your login password when prompted.
☞ When you type your password, you won't see what you're typing.
☞ If you don’t have a password, set one before taking Step 2. If that’s not possible, skip the step.
☞ Step 2 might not produce any output, in which case the Clipboard will be empty. Step 1 will always produce something.
☞ The commands don't change anything, and merely running them will do neither good nor harm.
☞ Remember to post the output. It's already in the Clipboard. You don't have to copy it. Just paste into a reply
☞ If any personal information, such as your name or email address, appears in the output of either command, anonymize it before posting. Usually that won't be necessary.
☞ Don't post the contents of the Terminal window.
☞ Don't paste the output of Step 1 into the Terminal window. Paste it into a reply.

Is ther a way to speed up a Mac? Mine has gotten slower and slower over time. When memory comes close to full would that have an effect on performance? Is there a way to determine unused programs/software to remove and free space?

Is there a way to speed up a Mac (similar to de-fragging on a PC)? Mine has gotten slower and slower over time.
When memory/disc comes close to full would that have an effect on performance? How should I determine what programs/software to remove and free space?

Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to:     OS X Maintenance - MacAttorney;
                                  The X Lab: The X-FAQs;
                                  The Safe Mac » Mac Performance Guide;
                                  The Safe Mac » The myth of the dirty Mac;
                                  Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
    used to manage backups and to restore backups. Time Machine
    requires a backup drive that is at least twice the capacity of the
    drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

T520 - 42435gg / Sound stutter and slow Graphic performance with Intel Rapid Storage AHCI Driver

Hi everybody,
I have serious Problems with my 42435gg
Any time I install the Intel Storage AHCI Driver (I've tried plenty of different versions) which is suggested by System Update I experience a horrible Sound stutter and slow Graphic performance in Windows 7 64-Bit.
The funny thing in this case: If the external e-sata port is connected the problems do not occur. If the port is unused again, the stutter begins immediately.
The only thing I can do is using the Windows internal Storage Driver with which I am not able to use my DVD recorder for example.
The device was sent to lenovo for hardware testing with no result. It was sent back without any repairing.
Anybody experience on this?
Kind regards,
Daniel

Did you try the 11.5 RST beta? Load up DPClat and see if DPC conditions are favorable.
What are you using to check graphics performance?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

HT4600 i Get a solid amber light sometimes, bUT all works fine. I have to unplug the airport extreme to reset it and then it turns green and starys that way for a week or so and then turns back to amber. why is this and how do i fix it ?

I gat a solid amber light once a week on my airport extreme, but all works fine. I have to unplug it to reset it and then the light turns back to green and it is good for another week and then it happens again. why is this and what can i do to fix it ?

Solid amber on an AirPort Extreme is an indication that the internal power supply is starting to act up.
If the AirPort Extreme is in warranty, it shouid be exchanged for another AirPort Extreme.
If the AirPort Extreme is several years old, keep any eye on things. When/if you find that you are having to reset the device several times a week, it's time to start thinking about a replacement device, as the end is near.

Ipod shuffle 2nd gen won't work, light flashing green and orange

My 2nd gen ipod shuffle won't work and the light is flashing green and orange. Or green, orange, orange, orange. I've Reset, Restarted, Restored and Re-installed, so before I chuck it out I wondered if there were any other suggestions to get it working? Thanks,

Sounds like it's still under warranty (one year). Take it back for replacement.

I have a 1st generation iPod shuffle when I switch on and press wheel a green and then orange light flashes.?

I Have a 1st generation iPod shuffle, on the wheel it's flashing green and orange.....any ideas.?

It sounds like the "Error light" described toward the end fo this document
http://support.apple.com/kb/HT1814
The document provides some possible causes, and things to try, including doing a Restore if the other suggestions do not apply or do not work.

Why is my iPod touch getting slower and slower

Please can anyone tell me why my iTouch is getting slower and slower?
also why do we have to do so many updates?
Can I go back to the original software for my ipod touch?
sorry for so many questions but they are related

- All I can say in this Apple forum is that downgrading the iOS is not supported by Apple.
- Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
- Restoring the iPod also helps

My iphone 4s' screen in broken, without dropping it.it just went hazy white to dark green and i can no longer see my screen, can i have a screen replacement?

My iphone 4s' screen is broken. I haven't dropped it or anything, or else it must've shown through its physical appearance. It just went into hazy white and green and now i cannot use it. Can i have a replacement for it? Thanks

Apple doesn't replace the screen, they replace the entire phone. If you've tried the basics (restart, reset, restore from backup, restore as new) and your screen is still broken, bring it to Apple for replacement. If you're not in the warranty period, you will pay $199 for the replacement.

2nd gen Shuffle not syncing blinks green and orange

My mom got a new computer. I installed Itunes and connected her 2nd gen Shuffle which previously had been administrated by her niece's computer. I deleted all music,restored to factory settings, bought new music but am unable to get music on her shuffle. Her shuffle appears in Itunes sidebar and in computer. Says it is syncing but no music is on Shuffle. Light blinks green and orange, green, orange. Troubleshoot says "current user not administrator". I followed steps in relevant topics but still no music on Shuffle. HELP

Try this page http://support.apple.com/kb/ht1238

Xine is green and slow

Similar Messages

Maybe you are looking for