Xinerama with some CDE utilities
Problem - two SunRay 3+ clients on (SRS 4.2 from SRSS 5.1.2 with all latest patch of Solaris) in multihead configuration with Xinerama enabled on Sol x86 CDE - can't run few CDE utilities, like dtfile (just does not show window), dtpad (no window) and dtcalc (core dump). Interestingly it does not work even if I try run these utilities with ssh -X tunneling from Sol 9 SPARC host.
However if I disable Xinerama with utconfig -x off everything works just fine. Tried giving different -display options, still the same. This thing is working perfectly with ancient SRS 3.1.
Any clues ? Logged case but support is pretty useless, i.e. nothing that I knew already.
Sorry this doesn't really help with the Xinerama problem, but since you are using the nvidia driver, have you considered using Twinview instead? You could do composite stuff too with Twinview - last I knew, Xinerama had problems with things that want to use compositing. I don't know how your setup is but if you're not set on using Xinerama, it might be an option to consider.
Similar Messages
-
My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
HELP PLEASE
Very worried!!Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo). -
Hi,
I have problems with some PDF files. After clicking on link to the file Safari shows me insted of normal document (which is working on Windows) hashes, numbers etc like it was a problem with coding or something. First I was using Preview, I though that maybe installing Acrobat Reader with plugins will solve the problem, but ofcourse it didn't. Did somebody has this same problem?Back up all data.
Please triple-click anywhere in the line below on this page to select it:
defaults delete -app Safari WebKitOmitPDFSupport
Copy the selected text to the Clipboard by pressing the key combination command-C.
Quit Safari. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign (“$”) to appear below what you entered. You can then quit Terminal. Test. -
I used to have an OLD Photoshop cd but it has been lost and my program is no longer on cd. I talked with some photographer friends and this is what one of them told me to get: Adobe Photoshop Lightroom and CS CC... HELP please?
If you still have your serial number, look at OLDER previous versions http://www.adobe.com/downloads/other-downloads.html
Otherwise, the US$ 9.99 plan is what is current at Cloud Plans https://creative.adobe.com/plans -
On 3G we cannot send Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine. We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this.Contact whomever supports the email account and get the correct Outgoing email server settings from them.
-
Adobe Creative Cloud - Photoshop CC / Photoshop CC (2014) i had first install Photoshop CC with some actualizations , I have install now Photoshop CC (2014) without desinstalling Photoshop CC... I would like stay only with the 2014 version but i don´t find more the desinstaller of old CC version and the 2 versions takes a lopt of space on my disk... is it normal or is there a necessity to stay with the 2 versions... Now I use only the 2014 version but the old version is always there ????
Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you. -
why is it when i update my status on facebook from iphone it splits the updates into two differents boxes with some funky symbols at the beginning.. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app where it says to update staus text to FBOOK i have already update my phone too.
if i go on the facebook site and update there through a brower on iphone it will work fine just cant us IPHONE mobile upload, . But its a pain of not using my IPHONE APP for facebook cause it does that.The warranty entitles you to complimentary phone support for the first 90 days of ownership.
-
Preview of Ken Burns effect doesn't work with some pictures
I just recently installed a new graphics card (ATI Radeon 7500) on my Sawtooth, 1.2 GHz, so I could utilize the Ken Burns effect in imovie HD. It works but only partly. It works great but with some pictures the preview pane doesn't show the photo. What I see is a what looks like bad reception on an old TV (fuzzies and the picture is distorted so bad you can't even make it out). With other pictures the preview shows up fine. I'm sure I've loaded the drivers. What else can I do?
Hi Tonyy13.
I am presenting the same problem. I can set the Ken Burns' effect while I am with the pictures before placing them in the Clip or Timeframe viewer. After placing them there, if I try to edit the picture (either by right clicking and choosing -edit picture or by control clicking and doing the same, I ended up with a black background. If you change the setting in this black ackground and update this changes they will be effective. So, you can change the slide duration, and everything in the sliders but without an image.
I was running System 10.3.9 and I thought this was the reason. Today, I went and bought Tiger but it didn't sove the problem. I do believe it is a bug in the program. According to Apple's Help and David Pogue's "The Missing Manual" this shouldn't happen.
If you solve this problem reply to this posting. If I did I will reply to your posting. Thank You. -
I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me
I'm going to guess videos buffer for a while also...
Two possibilities, one is you should close apps on the iPad, the other is your internet speed is not able to handle the demands of a high speed device.
To close apps: Double click home button, swipe up to close the apps.
To solve internet problem, contact your provider. Basic internet is not enough for video games and movies. Your router may be old and slow. -
My iPhone4 docks correctly with some devices but not others, please help!
Hi,
Firstly spologies if this is old news but sometimes its easier to 're-ask' than trawl thousands of pages!.....
I have a 3-year old iPhone 4 that has developed a problem which i'm trying hard to solve;
*Phone used to dock fine with anything and everything - this was about 1 year ago.
*for no apparent reason it ceased docking with my Bose Soundock and a Logic3 accessory dock (connected to a hi-fi) at home
*symptoms were; it would charge and operate as normal whilst docked but would not play music through either (the Logic3 dock did not acknowledge it was docked). Otherwise it would sync and connect normally with iTunes, etc. and connected fine when plugged into my car.
*I reset it, restored it from back-up, updated/reinstalled iOS (this has since updated at least twice) with no other effects. Also checked and reset all settings.
*I subsequently bought a Pure Contour dock as I was able to try it in the shop and my phone worked with it, plus it has Airplay anyway. I have since, in an attempt to find a bedside DAB radio/alarm dock that works with it, found that it works fine with some devices but not others with no rhyme or reason as to which.
*2 days ago I changed out the docking port myself using a cheap replacement bought from Amazon, to see if it would cure.
* now the problem is reversed! The Bose and Logic3 docks I have, that it wouldn't work on before, it now DOES....and the Pure dock and my car, which it DID work with before now fail to connect with it!
*just to reiterate this, my wife's gen3 and gen5 iPods dock and work faultlessly with all devices mentioned....and mine had done previously.
to my knowledge it is NOT;
- a compatibility issue. The phone used to work fine on everything I had. Then it stopped. How's that?!
- a connector issue. The male connectors on all docks haven't changed.......and the female connector in my phone has changed from liking selected devices to then liking the others!! (it is female after all ;-) !)
-a software issue. iOS has been updated and the phone wiped and restored and all sorts so many times I can;t see how it can be!
could it be a problem with the data exchange between phone and device when it is docked??
or do I really need to try changing the port for an 'official' one??
or is it just broken and that's that?!It's either a problem with the connector on your phone (dirt, lint, bent pin, corrosion) or with its connection to the motherboard inside. Cleaning the connector is a good place to start; either a dry toothbrush, air blast can or wood toothpick. Next inspect it carefully with a good magnifying glass or jeweler's loupe. If nothing turns up it is probably damage inside, which will be difficult to fix. Aren't you due for an upgrade about now? Your iPhone 4 is 3 generations out of date!
-
FGI0 - FGI5 Issues with Some Profit Center with Line Items
Hi Experts,
I am running with some issue, not sure if im missing something. I have created a report form thru FGI4 (with FAGLFLEXT), i have two line items which are related to expenses which are going to cost center and another line item which are related to revenue which is goint to PA segment. In expense line items i just added two characteristics one is chart of accounts and another one is account group for revenue items i have added chart of accounts, account group, profit center group and CO area. later i created a report thru this form and executed, i dont get any values for expense line items, where as for revenue i get the values, i dont why.
If i remove the profit center group in revenue line items, i get value for both expense and revenue. and i tried this option adding all profit center group for expense line items, then i get nothing for both exp and revenue.
The reason for having profit center group in line items, is to show reveneue from different profit centers.
I dont know what i am messing up, can anybody help me out please
Best Regards
gjDear Mr Saurab
Thanks for nice reply . As suggested I passed entry using Tcode 9KE0 and incorporated the Profit Center correction .The document also got posted as type A0 .
However when we are taking the report for the reference GL & Profit-Center using Tcode S_ALR_86000030 , there is no change in the figure . The figure remain same as appeared before posting of Document using Tcode 9KE0 .
Kindly guide us on the above please .
Regards
B Mittal -
it keeps popping up to tell me to update. yet when i check what it works with and known issues, it will not work with some of the things i use. thus how do i stop firefox from this regual reminder?
Tools\Options\Advanced..._ and in the "advanced" windows go ot "Update" tab,
UNCHECK the "Update Application\browser/firefox"
http://i56.tinypic.com/o5q2b5.jpg -
How can i erase an account with relationship with some class of tax
how can i erase an account with relationship with some class of tax
Hi Enrique,
I am not sure what you mean by this, can you please explain in more detail? You cannot erase accounts that already have transactions posted to it.
Hope it helps,
Adele -
How can I convert my music, and CDs to MP3, for use in my vehicle's AM/FM/ Stereo? I have a 16 GB SDHC Card, that I would like to load up with some of my music.
Thanks for any help you can furnish.
EdWell, this question really belongs in the iTunes forum, which is where you will get fast answers.
Just go to iTunes Preferences. Click on the General icon. Set When you insert a CD to Ask to Import CD. Click on Import Settings. Set Import to MP3 decoder. Make sure you're using Good Quality.
This should deal with your CD's.
With your current music, as long as it does not have DRM restrictions (older iTunes Music did), select the song, right click on the song (or group of songs), pull down to Create MP3 version. -
At a loss with some simple java classwork. Please help.
Hello. I'm having a problem with some work that I wasn't able to finish in class. I am not very good at java AT ALL, and I'm really at a loss on how to finish up the program and get it to print what I want it to.
My task is:
"Write a program that asks for two words and then eliminates the second word from the first word.
For example:
forgot - go = fort
bedevil - bed = evil
bedevil - evil = bed
stupid - is = Hey, is is not found in stupid."
This is my code so far:
public class wordSubtraction
public static String big = "bedevil";
public static String small = "bed";
public static void main(String[] args)
elimWord(String big, String small);
public static void elimWord(String big, String small)
if(big.indexof(small)==-1)
System.out.println(small + " isn't found in " + big);
else
big.substring(0, indexOf(small));
small.substring(indexOf(small)+small.length());
System.out.println(small + " + " + small.substring + " = " + big);
I keep getting this error:
/Users/mewmew/Desktop/wordSubtraction.java:8: ')' expected
elimWord(String big, String small);
^
1 errorI don't understand what this error means or how to fix it, it looks like I have all the parenthesis in there to me. Deleting or adding semi-colins, parethesis, brackets, or curly brackets just seems to give me more errors.
Any help is appreciated!No it's not JJEdit. The errors are a good thing -
and each one has to be
dealt with. When you call a String method various
things have to be
correct:
(1) The name of the method - case is important.
(2) The arguments - the things in the parentheses -
have to be exactly
the sort of thing that the method expects. For
example if the method
expects an int argument and you give it a String
there will be problems
(3) The methods must be called using a String
variable and a dot. If
you just say "substring(whatever)" that's an error.
The compiler is
saying "substring of what?" You have to write
"something.substring(whatever)"
Also - because it will be important later - both
substring() and indexOf()
return a value. It is up to you to do something with
that value. Usually
you assign it to a variable.
Just for the record I got the follow from the String
API doumentation here:
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Stri
ng.html
public int indexOf(String str) Returns the index
within this string of the
first occurrence of the specified substring.
public String substring(int beginIndex) Returns a new
string that is a
substring of this string. The substring begins with
the character at the
specified index and extends to the end of this
string.
public String substring(int beginIndex, int
endIndex)Returns a new
string that is a substring of this string. The
substring begins at the
specified beginIndex and extends to the character at
index endIndex - 1.
I would suggest you write elimWord() along these
lines:public static void elimWord(String big,
String small)
int pos = // find the index of small in big
if(pos == -1)
System.out.println(small + " isn't found in "
und in " + big);
else
String before = // find the bit before small
re small in big
String after = // find the bit after small in
small in big
System.out.println(big + " - " + small + " =
ll + " = " + before + after);
Thank you! That's very helpful and I feel that I'm THAT much more on my way to understanding what the heck I'm doing.
I'm trying, though...
Now I just gotta find out how to get the bits before and after small in big and solve these errors:
/Users/audreyeckel/Desktop/wordSubtraction.java:24: '.class' expected
int pos = big.substring(0, int indexOf(small));
^
/Users/audreyeckel/Desktop/wordSubtraction.java:24: ')' expected
int pos = big.substring(0, int indexOf(small));
^
2 errorsI just hope I can finish it before it gets TOO late...it's about 2:26 AM here and this is due...TODAY!
Maybe you are looking for
-
Premiere pro cc losing audio after save and close
Though I can see the wave form, audio won't play back after save, close and reopening of project. Not every file is affected. If I reimport track, audio will work again, but this is causing me to lose TONS of editing work when I have to start over
-
Text not centred in dreamweaver 8 tables when I test it in I.E
I know I am a noob. When I centre my text in a row of a table and test my page in I.E. it comes out to the left, like its been aligned like that. I aligned it to the middle. How do I fix this?
-
Unexpected end of file occurred while opening Photoshop CC psd in Photoshop Cs4
Can anyone help me? I'm using Photoshop CC 2014 on Windows 7 at home and Photoshop CS4 at school. I get an Unexpected end of file occurred when I try to open my assignements at school. How can this be fixed? Thank you! Sas
-
Java.lang.NullPointerException and javaBeans
I think that part of the problem is due to some wonky requirements, but maybe not. There are three classes: lab02.util.MySlider -- has a JSlider and a few other bits lab02.util.ColorSelector -- has three JSliders and creates a Color (not a JColorChoo
-
if i have default database during installation named mydb1 ...which has its password file pwdmyd1 in d:\oracle\ora9\database and the instance name is mydb1 and when i create a new database manually ..is it necessary to create a new instance and a new