XK01 Update using BDC

Hi,
I am updating xk01 . I have one problem .My Vendor is having 3 bank accounts in three different states .when I am up dating it is taking only one row of the flat file and when it comes to second row vendor number will be same but bank details will be different .How can i do this .
Thanks in advance

Hi,
you must keep in mind, that's a table control-
try:
CONCATENATE 'KNBK-BANKS(' zei ')' INTO hfnam. "cursor
PERFORM bdc_field USING 'BDC_CURSOR' hfnam.
PERFORM bdc_field_loop USING zei 'KNBK-BANKS' kbkwa-country_cd.
PERFORM bdc_field_loop USING zei 'KNBK-BANKL' kbkwa-bank_routing_cd.
PERFORM bdc_field_loop USING zei 'KNBK-BANKN' kbkwa-bank_account_no.
PERFORM bdc_field_loop USING zei 'KNBK-KOINH' kbkwa-account_holder.
Message was edited by: Andreas Mann

Similar Messages

Mutiple transcation update using bdc

Dear Gurus
I have two questions .
1. Can we update two transaction code using CALL TRANSACTION method in BDC?
through searching in the forum i found that it not possible to update multiple transaction using CALL TRANSACTION method to update two t code simultaneously i have to use BDC session method , because CALL TRANSACTION method uses Asynchronous method for update data.
2.Suppose I am updating multiple transaction code using session method at first i create sales order using va01 when sales order is created how i collect this sales order no to use in the second t code in session method.
Thanks in advance.
Chitta Ranjan

mahato123 wrote:
through searching in the forum i found that it not possible to update multiple transaction using CALL TRANSACTION method to update two t code simultaneously i have to use BDC session method , because CALL TRANSACTION method uses Asynchronous method for update data.
Don't know where you got this, but it's definitely possible to update using multiple transactions sequentially.
Rob

Hi regarding material master and vendor master (mm01,xk01) upload using BDC

hi can any one tell me how to upload material maste and vendor master using BDC.
will the views capture by shdb when i use recording.

Hey i suggest you to go to LSMW direct input program method. That's the best option.
Material Master:
Object               0020   Material master
Method               0000
Program Name         RMDATIND
Program Type         D   Direct Input
Vendor Master:
Object               0040   Vendor master
Method               0001   Standard
Program Name         RFBIKR00
Program Type         B   Batch Input

Update Transaction(IQS2) using BDC

Hi All,
I am developing BAPI (using BDC) which creates quality notification in SAP which is entered via front end web application. Structure p_qmsm contain 3 lines of task in notification. The code is as given below. To avoid problem of large no of lines on screen,code lines starting with * is used. This actually for pagedown after entering every 2 lines and creates new line. so that 2 lines always push up on screen and there will not be problem for creating large no of lines on screen
perform bdc_dynpro using 'SAPLIQS0' '7200'.
perform bdc_field using 'BDC_OKCODE' '=10\TAB11'.
LOOP AT p_qmsm INTO wa_qmsm.
perform bdc_dynpro using 'SAPLIQS0' '7204'.
perform bdc_field using 'BDC_OKCODE' '/00'.
CONCATENATE 'VIQMSM-QSMNUM(' wa_qmsm_cntr ')' INTO wm_qmsm_qsmnum.
CONCATENATE 'VIQMSM-MNGRP(' wa_qmsm_cntr ')' INTO wm_qmsm_mngrp.
CONCATENATE 'VIQMSM-MNCOD(' wa_qmsm_cntr ')' INTO wm_qmsm_mncod.
CONCATENATE 'VIQMSM-MATXT(' wa_qmsm_cntr ')' INTO wm_qmsm_matxt.
CONCATENATE 'VIQMSM-PSTER(' wa_qmsm_cntr ')' INTO wm_qmsm_pster.
CONCATENATE 'VIQMSM-PETER(' wa_qmsm_cntr ')' INTO wm_qmsm_peter.
perform bdc_field using wm_qmsm_qsmnum wa_qmsm-qsmnum.
perform bdc_field using wm_qmsm_mngrp wa_qmsm-mngrp.
perform bdc_field using wm_qmsm_mncod wa_qmsm-mncod.
perform bdc_field using wm_qmsm_matxt wa_qmsm-matxt.
perform bdc_field using wm_qmsm_pster wa_qmsm_pster.
perform bdc_field using wm_qmsm_peter wa_qmsm_peter.
wa_qmsm_cntr = wa_qmsm_cntr + 01.
ENDLOOP.
CALL TRANSACTION 'IQS2' USING wt_bdc
MODE 'N'
UPDATE 'A'
MESSAGES INTO P_MESSTAB.
The same code is used in modify mode also. web application is sending all 3 lines in modify mode even if single line is modified. It is already decided to send all rows back from web application to SAP in same sequence. It is working fine if i comment 5 lines which is starting with *. But in modify mode, how can i ensure that correct row is modified? and how can i achieve problem of large no of lines on screen?
Please suggest?
Edited by: Rob Burbank on Dec 14, 2009 3:20 PM

Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code. And please do not try to get around this by using two posts. I was able to re-format this by simply removing your commented out code.

I want to update standard table field (EKES-EINDT)? Not using BDC using FM.

Hi all,
I would like to seek for you help, to resolve a problem.
I need to know how can i update the EINDT(date) field in the EKES table.
Is there any Function Module or BAPI available for update EKES-EINDT ?
And my requirement is don't use BDC.
Currently I am doing in following way
LOOP AT I_DATA.
UPDATE EKES SET EINDT = P_NEWDAT
WHERE EBELN = I_DATA-EBELN
AND EBELP = I_DATA-EBELP
AND ETENS = I_DATA-ETENS.
ENDLOOP.
I know we should not update standard table directly. This will only update EKES it will not update other tables related with EKES-EINDT.
Got my point?
Please help me it's on high priority.

EKES can be updated with function module
ME_CONFIRMATION_UPDATE

UPDATING 0416 USING BDC

HI ALL,
CAN ANYONE TELL ME HOW TO UPDATE INFOTYPE 0416 USING BDC.
THANKS IN ADVANCE.

I HAVE UPDATED MY CONTACT PLZ SEND ME THE DETAILS.
I AM NEW IN THIS FIELD SO I AM NOT ABLE TO WORKOUT.

I want in LSMW SAME CODING. THIS IS USING BDC CALL TRANSACTION

REPORT ZXX_BDC_PRA NO STANDARD PAGE HEADING LINE-COUNT 20
 LINE-SIZE 150 .
Program Name :ZXX_BDC_PRA *
Object Id : *
Develper Name : praveen *
Start Date : 25.06.07 *
Description : uploading flat file to sap system *
*--structure for Data Uploading.
DATA: BEGIN OF IT_STR ,
 VKORG LIKE RF02D-VKORG,
 VTWEG LIKE RF02D-VTWEG,
 SPART LIKE RF02D-SPART,
 KTOKD LIKE RF02D-KTOKD,
 NAME1 LIKE KNA1-NAME1,
 SORTL LIKE KNA1-SORTL,
 ORT01 LIKE KNA1-ORT01,
 PSTLZ LIKE KNA1-PSTLZ,
 LAND1 LIKE KNA1-LAND1,
 SPRAS LIKE KNA1-SPRAS,
 END OF IT_STR.
*--Internal Table for Data Uploading.
DATA: ITAB LIKE IT_STR OCCURS 0.
*--Internal Table to sucessfull Records.
DATA: ITAB1 LIKE IT_STR OCCURS 0.
*--Internal Table to Store Error Records.
DATA: ITAB2 LIKE STANDARD TABLE OF IT_STR WITH HEADER LINE.
*--Internal Table for Storing the BDC data.
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA: MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA: COUNT TYPE I VALUE 1,
 S VALUE 0, E VALUE 0.
Selection screen *
SELECTION-SCREEN BEGIN OF BLOCK b1
 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_FILE TYPE IBIPPARMS-PATH.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
*functionality to use drill down list
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 PROGRAM_NAME = SYST-CPROG
 DYNPRO_NUMBER = SYST-DYNNR
 IMPORTING
 FILE_NAME = P_FILE.
Start-of-selection *
START-OF-SELECTION.
DATA FILENAME TYPE STRING.
FILENAME = P_FILE.
*-- Form to upload flatfile data into the internal table.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 FILENAME = FILENAME
 FILETYPE = 'ASC'
 HAS_FIELD_SEPARATOR = 'X'
 TABLES
 DATA_TAB = ITAB
 EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_READ_ERROR = 2
 NO_BATCH = 3
 GUI_REFUSE_FILETRANSFER = 4
 INVALID_TYPE = 5
 NO_AUTHORITY = 6
 UNKNOWN_ERROR = 7
 BAD_DATA_FORMAT = 8
 HEADER_NOT_ALLOWED = 9
 SEPARATOR_NOT_ALLOWED = 10
 HEADER_TOO_LONG = 11
 UNKNOWN_DP_ERROR = 12
 ACCESS_DENIED = 13
 DP_OUT_OF_MEMORY = 14
 DISK_FULL = 15
 DP_TIMEOUT = 16
 OTHERS = 17.
*--Generating the BDC table for the fields of the internal table.
LOOP AT ITAB INTO IT_STR.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0107'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'RF02D-KTOKD'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 PERFORM BDC_FIELD USING 'RF02D-VKORG'
 IT_STR-VKORG.
 PERFORM BDC_FIELD USING 'RF02D-VTWEG'
 IT_STR-VTWEG.
 PERFORM BDC_FIELD USING 'RF02D-SPART'
 IT_STR-SPART.
 PERFORM BDC_FIELD USING 'RF02D-KTOKD'
 IT_STR-KTOKD.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0110'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'KNA1-SPRAS'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 PERFORM BDC_FIELD USING 'KNA1-NAME1'
 IT_STR-NAME1.
 PERFORM BDC_FIELD USING 'KNA1-SORTL'
 IT_STR-SORTL.
 PERFORM BDC_FIELD USING 'KNA1-ORT01'
 IT_STR-ORT01.
 PERFORM BDC_FIELD USING 'KNA1-PSTLZ'
 IT_STR-PSTLZ.
 PERFORM BDC_FIELD USING 'KNA1-LAND1'
 IT_STR-LAND1.
 PERFORM BDC_FIELD USING 'KNA1-SPRAS'
 IT_STR-SPRAS.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0120'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'KNA1-TXJCD'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0125'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'KNA1-NIELS'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0360'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'KNVK-NAMEV(01)'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0310'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'KNVV-BEGRU'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0324'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'KNVP-PARVW(01)'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=ENTR'.
*--Calling the transaction 'Vd01'.
 CALL TRANSACTION 'VD01' USING BDCDATA MODE 'N' UPDATE 'S'
 MESSAGES INTO MESSTAB.
 PERFORM MESSAGES.
 REFRESH : BDCDATA, MESSTAB.
ENDLOOP.
END-OF-SELECTION.
*--Populating the Success records internal table.
IF ITAB1[] IS NOT INITIAL.
format color 5.
 WRITE: /'SUCCESSFUL RECORDS'.
 format color off.
 LOOP AT ITAB1 INTO IT_STR.
 WRITE:/ IT_STR-VKORG,IT_STR-VTWEG,
 IT_STR-SPART,IT_STR-KTOKD,
 IT_STR-NAME1,IT_STR-SORTL,
 IT_STR-ORT01,
 IT_STR-PSTLZ,
 IT_STR-LAND1,
 IT_STR-SPRAS.
 S = S + 1.
 ENDLOOP.
REFRESH : ITAB1.
 WRITE:/ 'TOTAL RECORDS',S.
ENDIF.
*--Populating the error records internal table.
IF ITAB2[] IS NOT INITIAL.
FORMAT COLOR 3.
 WRITE :/ 'ERRORS RECORDS ARE'.
FORMAT COLOR OFF.
 LOOP AT ITAB2.
 WRITE:/ ITAB2-VKORG,
 ITAB2-VTWEG,
 ITAB2-SPART,ITAB2-KTOKD,
 ITAB2-NAME1,ITAB2-SORTL,
 ITAB2-ORT01,
 ITAB2-PSTLZ,
 ITAB2-LAND1,
 ITAB2-SPRAS.
 E = E + 1.
 ENDLOOP.
REFRESH : ITAB2.
 WRITE: / 'TOTAL RECORDS',E.
REFRESH : ITAB2.
ENDIF.
End of Selection *
END-OF-SELECTION.
TOP-OF-PAGE *
TOP-OF-PAGE.
WRITE:/ SY-ULINE.
WRITE:/10 'REPORT ID',21 SY-REPID,35 'USERNAME',46 SY-UNAME,
60 'SYSTEM DATE',70 SY-DATUM,80 'SYSTEM TIME',90 SY-UZEIT,
100 'PAGE NO',108 SY-PAGNO.
WRITE:/ SY-ULINE.
FOrm to Populate the BDC table.
 Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. "BDC_DYNPRO
 Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> SPACE.
 CLEAR BDCDATA.
 BDCDATA-FNAM = FNAM.
 BDCDATA-FVAL = FVAL.
 APPEND BDCDATA.
ENDIF.
ENDFORM. "BDC_FIELD
*& Form messages
FORM MESSAGES .
LOOP AT MESSTAB.
 IF MESSTAB-MSGTYP = 'I'.
 WRITE : / MESSTAB-MSGV1.
 ELSEIF
MESSTAB-MSGTYP = 'S'.
 INSERT LINES OF ITAB FROM COUNT TO COUNT INTO TABLE ITAB1 .
 COUNT = COUNT + 1.
 WRITE : / MESSTAB-MSGV1.
 ELSEIF
 MESSTAB-MSGTYP = 'E'.
 INSERT LINES OF ITAB FROM COUNT TO COUNT INTO TABLE ITAB2.
 COUNT = COUNT + 1.
 WRITE : / MESSTAB-MSGV1.
 ENDIF.
ENDLOOP.
ENDFORM. " messages

Hi
Go through the doc and do the same using LSMW
BDC is the way to transfer data by writing a batch input program which can use either session or call transaction method.
LSMW used to transfer data without/less code.
What type of data we transfer using LSMW?
LSMW is best suited for transferring master data.
Actually BDC and LSMW are not comparable at all.
for example LSMW itself can use BDC as a way of mass data transfer.
BDC is a mass data transfer technique via screen logic of existing SAP Data entry transactions. It behaves as if you are manually making thousand of entires into sap system as a background job. And that is probably the reason why BAPI's are preffered over BDC's.
On the other hand LSMW is a tool to facilitate DATA migration from other legacy systems ... It contains step by step procedure for data migration.
Like Managing Data Migration Projects , Creating Source Structures , Mapping Source structures wid Target structures , etc etc
LSMW internally might well be using the following techniqes for data transfer..
1. IDOX
2. Direct Input / BDC
4. BAPI's
LSMW is an encapsulated data transfer tool. It can provide the same functionality as BDC infact much more but when coming to techinical perspective most the parameters are encapulated. To listout some of the differences :
LSMW is basicaly designed for a fuctional consultant who do not do much coding but need to explore the fuctionality while BDC is designed for a technical consultant.
LSMW offers different techinque for migrating data: Direct input ,BAPI,Idoc,Batch input recording. While bdc basically uses recording.
LSMW mapping is done by SAP while in BDC we have to do it explicitly .
LSMW is basically for standard SAP application while bdc basically for customized application.
Coding can be done flexibly in BDC when compared to LSMW
1. Maintain Attributes:
Here you have to choose the second option and you can do the recording how this should work. Then assign the same to the Batch Input Recording name.
2. Maintain Source structure:
Create a structure name
3. Maintain Source field:
In this you have to create a structure same as that of the input file
eg: name
age
4. Maintain structure relations:
This will link the structure to the input file.
5. Maintain field mapping and conversion rules:
Here is the place where you can do coding, depending upon the code you have written or assignment you have done the values will get picked up from the file and get processed.
6. Maintain field mapping and conversion rules:
If you have any fixed values you can define here.
7. Specify files:
Specify the input file path and type.
8. Assign files:
This will assign ur file to the Input file
9. Read Data:
This will read ur data from teh file.
10. Dispaly Read Data:
You can see the uploaded data
11. Convert Data
This will convert the data to the corresponding format for processing
12. Display Converted data:
13. Create batch input session
Here this will create a batch input session for processing
14. Run Batch Input session:
By clicking on the session and process the same you can do teh needfu.
http://www.sapbrain.com/TOOLS/LSMW/SAP_LSMW_steps_introduction.html
http://esnips.com/doc/8e732760-5548-44cc-a0bb-5982c9424f17/lsmw_sp.ppt
http://esnips.com/doc/f55fef40-fb82-4e89-9000-88316699c323/Data-Transfer-Using-LSMW.zip
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
http://esnips.com/doc/7582d072-6663-4388-803b-4b2b94d7f85e/LSMW.pdf
for Long texts Upload
Please take a look at this..
http://help.sap.com/saphelp_erp2005/helpdata/en/e1/c6d30210e6cf4eac7b054a73f8fb1d/frameset.htm
Reward points for useful Answers
Regards
Anji

Call transaction using bdc tab and also skip first screen??

Hi,
Please help.
I want to call transaction PA30 fill it with values which are determined only at runtime and then skip first screen.
The screen doesn't have parameter fields so i cannot use 'set parameter id'.
I also cannot create a transaction with parameters as I only have these at runtime.
Anyone done anything like this???

hi,
you might be populateing the itab bdc_tab with the corresponding values fronm the recording.
while doing the recording go until to the screen wher u want to finsih.
and populate the bdc_tab wit the ok code,screen number and the value.
this will do.
for eg see the code below.
METHOD analyze_log.
DATA : wrk_extid TYPE balhdr-extnumber.
DATA : wrk_date(10) TYPE c.
DATA : it_rspar TYPE TABLE OF rsparams .
DATA : wa_rspar TYPE rsparams.
DATA: it_bdcdata TYPE STANDARD TABLE OF bdcdata,
      wa_bdcdata TYPE bdcdata.
DATA: params TYPE ctu_params.
CONSTANTS : object TYPE balhdr-object VALUE 'ZKIV_LOG'.
IF wa_kopf-vertr_nr IS NOT INITIAL.
    CONCATENATE wa_kopf-vertr_nr '/' wa_kopf-nachtr_nr INTO wrk_extid.
    wrk_date = '01.09.2006'.
    SET PARAMETER ID 'BALOBJ' FIELD object .
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
    wa_rspar-selname = 'ALDATE'.
    wa_rspar-sign = 'I'.
    wa_rspar-kind = 'P'.
    wa_rspar-option = 'EQ'.
    wa_rspar-low = wrk_date.
    APPEND wa_rspar TO it_rspar.
ELSE.
    CLEAR wrk_extid.
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
ENDIF.
Update BDC tab
--Call SLG1 using BDC--&
params-dismode = 'E'. "Show errors only
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'BALHDR-ALDATE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BALHDR-ALDATE'.
wa_bdcdata-fval = wrk_date.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=SELE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=&F03'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_SUBSCR'.
wa_bdcdata-fval = 'SAPLSBAL_DISPLAY                        0101SUBSCREEN'.
APPEND wa_bdcdata TO it_bdcdata.
CALL TRANSACTION 'SLG1' USING it_bdcdata OPTIONS FROM params.
--End of BDC--&
ENDMETHOD.
here wat i m doing is that i dont want the subscreen 101 to be displayed..
Message was edited by:
        Sandeep S

Change transaction using BDC-problem for large number of lines on screen

Hi All,
I am developing BAPI (using BDC) which creates quality notification in SAP which is entered via front end web application. Structure p_qmsm contain 3 lines of task in notification. The code is as given below. To avoid problem of large no of lines on screen,code lines starting with * is used. This actually for pagedown after entering every 2 lines and creates new line. so that 2 lines always push up on screen and there will not be problem for creating large no of lines on screen
perform bdc_dynpro using 'SAPLIQS0' '7200'.
perform bdc_field using 'BDC_OKCODE' '=10\TAB11'.
LOOP AT p_qmsm INTO wa_qmsm.
*IF wa_qmsm_cntr > 2.
       wa_qmsm_cntr = 2.
       perform bdc_dynpro using 'SAPLIQS0'                   '7204'.
       perform bdc_field   using 'BDC_OKCODE'                 '=PEND'.
ENDIF.
perform bdc_dynpro using 'SAPLIQS0' '7204'.
perform bdc_field using 'BDC_OKCODE' '/00'.
CONCATENATE 'VIQMSM-QSMNUM(' wa_qmsm_cntr ')' INTO wm_qmsm_qsmnum.
CONCATENATE 'VIQMSM-MNGRP(' wa_qmsm_cntr ')' INTO wm_qmsm_mngrp.
CONCATENATE 'VIQMSM-MNCOD(' wa_qmsm_cntr ')' INTO wm_qmsm_mncod.
CONCATENATE 'VIQMSM-MATXT(' wa_qmsm_cntr ')' INTO wm_qmsm_matxt.
perform bdc_field using wm_qmsm_qsmnum wa_qmsm-qsmnum.
perform bdc_field using wm_qmsm_mngrp wa_qmsm-mngrp.
perform bdc_field using wm_qmsm_mncod wa_qmsm-mncod.
perform bdc_field using wm_qmsm_matxt wa_qmsm-matxt.
wa_qmsm_cntr = wa_qmsm_cntr + 01.
ENDLOOP.
CALL TRANSACTION 'IQS2' USING wt_bdc
MODE 'N' UPDATE 'A' MESSAGES INTO P_MESSTAB.
The same code is used in modify mode also. web application is sending all 3 lines in modify mode even if single line is modified. It is already decided to send all rows back from web application to SAP in same sequence. It is working fine if i comment 5 lines which is starting with *. But in modify mode, how can i ensure that correct row is modified? and how can i achieve problem of large no of lines on screen?Please suggest?

Hi yogesh,
how can i ensure that correct row is modified?
1. For this we need to know two things ;
   a) the database table in which the entries are already stored
   b) the sequence in which they are displayed in the transaction.
2. So before changing any line, we need to compare (the primary key values / important values)
   a) as per the database table and as per the incoming data from web application (using bapi)
b) if the match is ok, it means that particular row was not modified, else modified.
how can i achieve problem of large no of lines on screen?
1. For this I am not sure about the transaction and its screen. Manytimes for appending row on the screen,
there is a PLUS + button on the grid toolbar. So for every entry, (inspite of some empty/filled rows already visible on the screen), we should use the + button, and this new row always appears on the top i.e. row number 1.
hope this helps.
regards,
amit m.

Creating Sales order texts while using BDC session method is not working

Hi All,
I have an existing program which creates sales order using BDC session method.( Actual program uses BAPI to create sales order and in case if any error occurs during creation of sales order BDC session is generated so that user can process it later and i am facing issues in this part of code where it uses BDC)
I wanted to modify this BDC sesion to update the sales order text also. I tried recording VA01 for creationg sales order text unfortunatly it is not capturing the data i am entering in the text fields.
Please suggest if there is any way to create sales order using BDC.
Regards
Sheeba

Hi Madhu,
'=TP_CREATE' is the OK code i am getting for creating TEXTS. But the text entered are not captured in BDC.
Part of BDC program generated for cretaing sales order texts.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=%_GC 128 22'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_CREATE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=%_GC 128 22'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_CREATE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBACK'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
Regards,
Sheeba

Material Creation Using BDCs.

Hi all,
I have developed a program for Material Creation using BDC.
Material is Being created and that is working well and good.Here i have a Requirement to update the Newly creted material in Ztable.So when i use call transaction mathod,i have written code for updation under the line CALL TRANSACTION.where in iam getting newly creatde material from MARA table,and so it is working perfectly fine..
But our requirement should be sessions method,so when i use sessions method and exeute the program..we face the problem of updation.
the piece of code for updation is updating previously created material.
Literally speaking only the sessions are created ,when the program is executed,material is not created when program is run.Material is only created when the sessions are processed using SM35,
So how should i do here,where should be the updation code written and where will we get the newly created material in sessions method..
Pls Help me in solving this problem

hai priyanaka it might be due to configuration problem
bcos manulay also ur gettign this , so just consult ur MM consultant for soem setting
regards
afzal

In RFC how to uploading data using bdc

Hi, Experts
In RFC how to use bdc program for uploading data
any example plz.
my requrement for tcode ME21.
thank you in advance.
with best regards
sai

Thank u reply
my requirement is in function moudle
( Program will be called from non-sap system with the data in the form of table as per the structure given above. Then the program will do the some validation for the data. If data validated correct, BDC will be run for creating DO
condition is )
ex:
if T_itab KNTTP = K,
Run BDC for transaction ME21.
( in that you should not use upload and ws_upload )
in put paramer is taking value for structure (non- sap ) run the bdc update in sap system.
plz any sample program
regards
sai

How to change the property of the fields on screen while using BDC

Hello,
I am working on a program where I am using BDC call transaction method to update vendor master data using Fk02. I need to call the transaction in mode 'E'. As per the requirement I don't want user to see all the fields available on that screen. For example on Payment transactions screen I only want user to see fields like Bank key, bank number in the editable mode and rest all the fields on the screen should be greyed out.
Can you please help with how can i do this.

Hi,
I think you can achieve this using transaction variant. Create a transaction variant using SHD0 and grey out the fields which you want. After that in BDC, instead of calling FK02, call the transaction variant you created. you may have to change the BDC recording a bit, but i think you can give it a try?
Do let me know if it helps you.
Regards,
Raghav.

Dependent characteristic Updation using QP02

Hi ,
Could you please help me regarding updation of dependent characteristics in the transaction QP02.
My requirement is i will give the plant and group and material no in the first screen and i select the first entry and i will click inspection characteristics in the appl tool bar and then i will select master inspection characteristics and i have to press dependent characteristics update
to update
diameter,unit of measurment.... based on material assignment. CAn i use any BAPI for this?
I am using 'bapi_inspectionplan_create ' but it is not update.
If i am using BDC program I am facing problem with selection of line item in inspection charcterisitic based Material Inspection characteristic and
In the Dependent characteristic i am updating based on Customer Number .But how i can select the particular line item based on customer number.
If you anybody know the solution please help to me .
Regards
Nandan.

Hi,
We have more than 10000 entires its not possible using this Transaction .
Can anybody help me regarding solving my problem.
Regards
Nandan.N

Flat file to upload data using BDC for transaction MM01

Hi
I am trying to update data using bdc code has been attached below using a txt file.
It is updating the first set of data into the table mara ,but for the rest it is not
All the data from txt file has being loaded to internal table , but the problem is it does not gets updated from internal table to the database .
Only the first set of data has been loaded , rest of the data is not loaded
content of txt file
zsc zsc kg
zsv zsv kg
zsb zsb kg
Actual code
report ZMAT_UPLOAD
 no standard page heading line-size 255.
types declaration..........................................................................
types : begin of t_mat,
 matnr(20),
 desc(50),
 uom(5),
end of t_mat.
internal table and workarea declaration.......................................
data : i_mat type table of t_mat.
data : wa_mat type t_mat.
include bdcrecx1.
start-of-selection.
moving the flat file content to internal table................................
CALL FUNCTION 'UPLOAD'
 EXPORTING
 FILETYPE = 'DAT'
 TABLES
 data_tab = i_mat.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
perform open_group.
loop at i_mat into wa_mat.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
 'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
 '=AUSW'.
perform bdc_field using 'RMMG1-MATNR'
 wa_mat-matnr.
perform bdc_field using 'RMMG1-MBRSH'
 'P'.
perform bdc_field using 'RMMG1-MTART'
 'ZOH'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
 'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
 '=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
 'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
 '=BU'.
perform bdc_field using 'MAKT-MAKTX'
 wa_mat-desc.
perform bdc_field using 'BDC_CURSOR'
 'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
 wa_mat-uom.
perform bdc_field using 'MARA-MTPOS_MARA'
 'NORM'.
perform bdc_transaction using 'MM01'.
endloop.
Perform close_group.

Hi Sumant,
just concentrate on bold one
report ZMAT_UPLOAD
no standard page heading line-size 255.
types declaration..........................................................................

data : begin of t_mat occurs 0,
matnr(20),
desc(50),
uom(5),
end of t_mat.
internal table and workarea declaration.......................................
*data : i_mat type table of t_mat.
*data : wa_mat type t_mat.
include bdcrecx1.
start-of-selection.
moving the flat file content to internal table................................
CALL FUNCTION 'UPLOAD'
EXPORTING
FILETYPE = 'DAT'
TABLES
data_tab = i_mat.---> t_mat.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
perform open_group.
loop at i_mat into wa_mat.------>loop at t_mat.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'=AUSW'.
perform bdc_field using 'RMMG1-MATNR'
wa_mat-matnr.---->t_mat-matnr(change in this for ur wa to t_mat.
perform bdc_field using 'RMMG1-MBRSH'
'P'.
perform bdc_field using 'RMMG1-MTART'
'ZOH'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
perform bdc_field using 'MAKT-MAKTX'
wa_mat-desc.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
wa_mat-uom.
perform bdc_field using 'MARA-MTPOS_MARA'
'NORM'.
perform bdc_transaction using 'MM01'.
endloop.
Perform close_group.
Reward points for helpful answers.
Thanks
Naveen khan
Message was edited by:
 Pattan Naveen
Message was edited by:
 Pattan Naveen

XK01 Update using BDC

Similar Messages

Maybe you are looking for