XL Auto Open not needed
Hi All,
When trying to save a report in excel, and we choose the path where the file is to be saved, Excel run the Auto Open Macro. ¿How we avoid that?. It is not needed at all. We just need to save the file in the path chosen, and the work with that file later on.
Thanks in advance,
Regards.
Hi,
Thanks for your reply.
I already did that, I remove AutoOpen.xls from the path we use for Excel Folder, and it still popping up. It's been happening recently, since last week. It's giving messages like AutoOpen is locked for another user, even when the file is already saved.
Any Ideas? We need to save files without Auto Open, like before.
Regards.
Similar Messages
-
In the previous version of FF I could type a term in the address bar and it would auto open that website, now it just performs a google search. Is that a setting I can adjust or is it not available anymore?
The change between Firefox 3.6.* and Firefox 4 is how location bar search works. In Firefox 3.6 it uses Google "Browse by name" search. With the browse by name search, it performs a Google search and if there is a clear match it will take you to the site, otherwise it shows the Google search result. With Firefox 4 it just performs a Google search if you type something which is not recognised as a URL.
To get the Firefox 3.6 behaviour on Firefox 4 you need to change a hidden preference.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''keyword.URL''', double-click on it and change its value to the link shown below
[http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=]
If you prefer, you can also do this by installing the Browse by Name extension - https://addons.mozilla.org/firefox/addon/browse-by-name -
When I click on a web page link, it creates a bookmark does not open page, need to right click and open new page or tab
My own problem not a system one
-
"Fire-vault protected home folder did not open and needs to be repaired."
I recently updated my macbook to leopard and after my laptop downloaded system updates, it had to restart but when I came to the login section and tried to login, I get this message:
"Fire-vault protected home folder did not open and needs to be repaired. Click OK to repair the folder and continue logging in. Click Cancel login to log in as a different user."
I don't have a different user so I clicked OK, but then I get this message:
"You are unable to log in to the user account "Kyle" at this time. Logging in to the account failed because an error occured."
So now I can't login and I'm a college student and need important files on my computer. Someone please help! I have class tomorrow!Sorry, I re-read your question and realize from the title you had file vault on upgraded and now it won't let you into the home folder. This is a known issue and I hope Apple produce a fix. I encountered this problem but fortunately I took a bootable image backup to a firewire drive. I booted off that as root and then opened the sparese image which is the home folder. This gave warnings but let me copy important documents to safety and also export address book and safari book marks.
If you do not have a backup I am very sorry to say you may have lost those files. It is worth backing up important college work, even if it is just to CD. I hope Apple come up with a fix for this because many of us hit this problem. Part of the reason for owning a Mac is you do not expect to have these issues. It made me feel like I had just installed XP! -
Check "Open safe files" in Safari and define docx and xlsx extensions in ~/Library/Preferences/com.apple.DownloadAssessment.plist not work. Old doc and xls files was auto opened successfully...
Content of .plist file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>LSRiskCategorySafe</key>
<dict>
<key>LSRiskCategoryExtensions</key>
<array>
<string>doc</string>
<string>docx</string>
<string>xls</string>
<string>xlsx</string>
<string>ppt</string>
<string>pptx</string>
</array>
</dict>
</dict>
</plist>Yes, but there at least you are talking to people who all use the app, while in this forum (which is for hardware and not software in any case, so already off the mark, since the problem has nothing to do with hardware), it is probably a minority.
A better place would be
https://discussions.apple.com/community/mac_os/os_x_mountain_lion
and or
https://discussions.apple.com/community/mac_os/safari
I did see someone from serveral years ago with the same problem at
http://www.neowin.net/forum/topic/877358-open-microsoft-office-files-automatical ly-after-download-in-safari/
I wonder if there is another list somewhere of permissible extensions in that .plist.... -
Filevault "did not open and needs repair" upon Login
When attempting to login my second time after installing Leopard onto my Macbook, a warning appears saying that "Your FileVault-Protected home folder did not open and needs to be repaired. Click ok to repair the folder and continue logging in. Click cancel to log in as a different user."
Naturally, I clicked OK in hopes that it would just log me in as normal.
However, when i clicked OK it says "You are unable to log in to the user account 'elizabethsherman' at this time. Logging in to the account failed because an error occurred."
I've tried restarting multiple times, but nothing is working.
My login picture has also magically changed. I don't think that correlates with the problem..
Has anyone ran into this problem or know what i should try to do??
Help!
Thanks,
Liz ShermanCheck out http://docs.info.apple.com/article.html?artnum=25695 I couldn't find a comparable Leopard document.
-
Import Dialog will not auto open - Lightroom 4.1
Since I upgraded to Lightroom 4.1 from 3 the Import Dialog screen will not auto open when I insert a memory Cart to my Imac.
I have the correct box ticked in the preferences.I have performed all of the above and I still can't get Lightroom 4.2 to open to the Import screen when inserting a memory card. If LR is already open and then a card is inserted...yes the Import screen opens. If LR is 'Quit' (closed) and a card is then connected Lightroom opens to the Library, but not the Import screen. I have also tried to delete the preferences files and restart, but I'm unsuccessful with multiple tries there too.Running a Macbook Pro 10.6.8. Lightroom 4 opens as desired—connect card via card reader, LR launches and opens to the Import screen—on my iMac 10.7.4.
LR 4.2 Build 850741
Chrlz_B -
How to make pdf file auto open with adobe reader after downloaded
how to make pdf file auto open with adobe reader after downloaded
I note from your system details that you have the plugin for adobe pdf s so I would have expected the files should open in firefox '''without''' you needing to explicitly download them.
Once the files are open in firefox, you will also get the option to save them permanently to a location on your computer. If you wish I suppose you could set the file type pdf to be associated with and be opened by firefox instead of with the Adobe Acrobat Reader, but that would just seem to be an additional complexity. -
Flash player silent auto update not working
I was glad to read the news about the new feature of silent auto updates of the Adobe Flash player, but unfortunately this is not working on my machine. Has anyone had the same problems and was able to solve them?
Some information on my setup:
I had previously installed Flash player version 11.1.102.63, both ActiveX and Plugin version (installed through the .msi files, deployed via Active Directory/GPO - no further configuration, just plain original .msi files).
To test the auto update feature, I decided to install the new 11.2.202.228 version, but only the ActiveX version. I installed this via the .exe installer (install_flash_player_11_active_x_32bit.exe) manually, choosing "Install updates automatically when available (recommended)" in the last step of the installation, as seen here:
http://www.adobe.com/devnet/flashplayer/articles/background-updater-windows.html
When I open Control Panel -> Flash Player, under the "Advanced" tab I see:
"Install updates automatically" is chosen, but greyed out (no admin rights with this windows user)
ActiveX version: 11.2.202.228
Plug-In version: 11.1.102.63
The file "mms.cfg" under C:\WINDOWS\system32\Macromed\Flash\ contains:
AutoUpdateDisable=0
SilentAutoUpdateEnable=1
The task "Adobe Flash Player Updater" was created and is scheduled to run every 1 hour. I can see that it is started ("last start time"), the result code is 0x0 which means "no error".
So everything as expected. But the auto update is not working, since the plugin version of flash player never gets updated!
I edited the "mms.cfg" and added:
SilentAutoUpdateVerboseLogging=1
After manually starting the task, there are some lines added to "FlashInstall.log" in the same directory:
2012-4-4+7-20-48.814 [info] 1614
2012-4-4+7-20-48.829 [info] 1615
2012-4-4+7-20-48.829 [info] 1618
2012-4-4+7-20-48.829 [info] 1619 1063
2012-4-4+7-20-48.876 [info] 1614
2012-4-4+7-20-48.876 [info] 1615
2012-4-4+7-20-48.876 [info] 1618
2012-4-4+7-20-48.876 [info] 1608
2012-4-4+7-20-48.876 [info] 1604
2012-4-4+7-21-10.425 [warning] 1403 12029
2012-4-4+7-21-10.425 [warning] 1407 183
2012-4-4+7-21-10.425 [warning] 1408
2012-4-4+7-21-10.456 [info] 1624
2012-4-4+7-21-10.456 [info] 1612
2012-4-4+7-21-10.456 [info] 1621
What does this mean?
Some more information:
Windows XP SP3, all windows updates installed, german
Avira Professional Security anti-virus software
Machine is behind a proxy server, but this is set up in Control Panel -> Internet Options
I suppose this is a problem with our proxy server. Does the auto updater not use the proxy information from the Windows Control Panel settings?
Kind Regards,
MartinHey Hans,
After reading of your sucsess I attempted to replicate it.
I am happy to say that I managed to update from Adobe Flash 11.2.202.228 to 11.2.202.233 on serveral different windows 7 notebooks and desktops sliently.
I went into the windows task scedular and ran the Adobe Flash Player Updater task (I didn't need to change anything in the task or the service for it to work).
The only issue I found was that if I ran the task again without restarting the computer no requests from the client would show up in the logs from my web server but if I restarted my computer and then reran the task it would work again. I'm assuming that it will only sent requests out every 24hours is talked about in page 18 of the Flash Player 11.2 Administration Guide.
My Web Servers logs look like this:
2012-04-27 05:45:01 W3SVC1967680676 10.135.12.38 GET /pub/flashplayer/update/current/sau/11/xml/version.xml - 443 - 10.135.13.17 Get+Flash+Player+version+xml/1.0 200 0 0
2012-04-27 05:45:05 W3SVC1967680676 10.135.12.38 GET /pub/flashplayer/update/current/sau/11/install/install_all_win_ax_sgn.z - 80 - 10.135.13.17 Download+Flash+Player+Installer/1.0 200 0 0
My mms.cfg looks like this:
AutoUpdateDisable=0
SilentAutoUpdateEnable=1
SilentAutoUpdateServerDomain=proxy.tallangatta-sc.vic.edu.au
I think the biggest issue I had during testing was that I forgot to my web servers certificate into the windows certificate stores trusts root certs of my notebooks/desktops. EG: http://blogs.adobe.com/livecycle/2012/04/rights-management-how-to-get-windows-7-to-trust-a -self-signed-server-certificate.html
I have since deployed the mms.cfg file and added my web servers certificate into the trusted root certs via group policy to all my clients and it is working very well. I have also writen a batch file to download the needed files from adobe for that backgroup updater and to put them on my web server. I created a daily task on my web server to run the batch file. If anyone wants the batch file or shell script please email me and I'll forward it on.
My batch file pretty much looks like this:
@echo off
:::::::::: INFOMATION ABOUT SCRIPT ::::::::::
:: This Script Titled adobe-flash-background-updates and was written by Tyrone Wyatt of www.cloudportal.org.
:: This Script is open to use by everyone and is not under any licence.
:: See flash_player_11_2_admin_guide.pdf for more infomation on how this script is required to function.
:::::::::: SCRIPT CONFIG ::::::::::
:: The TITLE option is the scripts name
set TITLE=adobe-flash-background-updates
:: The LOG option is the log file.
set LOG=./%TITLE%.log
:: The SOURCE option is the mirror on which you would like to download the flash files from.
set SOURCE=http://fpdownload2.macromedia.com
:: The DESTINATION option is where you would like your downloaded files to go so they are accessable by your web service.
set DESTINATION=d:\wwwroot\Proxy
:: The VERSION option is the current major version of Flash Player (for Flash Player 11.2, the major version is 11).
set VERSION=11
:: The Proxy settings for wget to use
set HTTP_PROXY=http://edupass.tallangatta-sc.vic.edu.au:8080
:::::::::: SCRIPT CORE ::::::::::
echo Welcome to %TITLE% Script!
echo =O====== %date% %time% ======== >> %LOG% 2>&1
if exist %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\xml (
echo Skipping destination folder structure creation.
) else (
echo Creating destination folder structure.
mkdir %DESTINATION%\pub >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update\current >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update\current\sau >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION% >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\xml >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\install >> %LOG% 2>&1
echo Downloading files...
wget.exe -nv %SOURCE%/pub/flashplayer/update/current/sau/%VERSION%/xml/version.xml -O %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\xml\version.xml >> %LOG% 2>&1
wget.exe -nv %SOURCE%/pub/flashplayer/update/current/sau/%VERSION%/install/install_all_win_ax_sgn.z -O %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\install\install_all_win_ax_sgn .z >> %LOG% 2>&1
wget.exe -nv %SOURCE%/pub/flashplayer/update/current/sau/%VERSION%/install/install_all_win_pl_sgn.z -O %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\install\install_all_win_pl_sgn .z >> %LOG% 2>&1
wget.exe -nv %SOURCE%/pub/flashplayer/update/current/sau/%VERSION%/install/install_all_win_64_ax_sgn.z -O %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\install\install_all_win_64_ax_ sgn.z >> %LOG% 2>&1
wget.exe -nv %SOURCE%/pub/flashplayer/update/current/sau/%VERSION%/install/install_all_win_64_pl_sgn.z -O %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\install\install_all_win_64_pl_ sgn.z >> %LOG% 2>&1
echo Script complete! See log file for more infomation %LOG%
echo =X====== %date% %time% ======== >> %LOG% 2>&1
echo. >> %LOG% 2>&1
:::::::::: END OF SCRIPT ::::::::::
Thanks for your help,
Tyrone Wyatt. -
Netctl-auto Is Not Observing Priority
I have been using netctl with a single profile for the past few months without issue. My universities network offers a (much faster) WPA network in addition to a (more available) guest network. I am trying to configure netctl-auto to connect to these profiles using the Priority parameter in the profiles. I have set Priority=100 for WPA and Priority=75 for the guest network. Whenever I reboot my machine the guest network is selected and activated by netctl-auto even though the priority is set to use WPA.
Would anyone have any insight as to why the priority is being ignored?I am having a similar issue, and would like to have a fix. I have 3 competing profiles, two guest networks and one eduroam. The first two profiles are simple, set up pretty much exactly as examples/wireless-open, and have Priority=1 and =2, respectively. The eduroam account contains a WPAConfigSection, and has Priority=3. Netctl-auto will not ahdere to these priorities. In order to start eduroam, I need to “netctl-auto disable” both guest profiles.
-
How to delete items from the list of "auto-open" tabs that load whenever FF4 opens?
When I recently downloaded FF4, I was asked if I'd like to have FF automatically open the same tabs as were set in my IE. Great! Worked perfectly until I set those tabs as App Tabs. Now both the App Tabs and the original IE set of tabs open whenever I open FF -- essentially each tab loads twice -- as app tab and large tab. How can I delete tabs from the list of "auto-open" tabs? In addition, for some reason, every time I try to set my home page, it's not working -- I keep getting the same home page regardless of how many times I have tried to set a new one.
You can close a tab with a middle-click or with a left click on the close X on the tab or via the right-click context menu of that tab.<br />
Do those tabs come back if you close then and lose Firefox? -
What is the minimal number of open ports needed to use forms apps
Hi,
Our network administrators are doing a network segmentation / security project and they want to make it so that only authorized users can ping or see my oracle EBS server on the network, but they also want to lock down all ports that users can see, except for port 8000, which is the port we use to serve EBS on apache. I am having an argument with them. Because we use forms in socket mode, I am arguing that we need to keep all ports open because forms uses a port range and creates a socket with the users's PC in addition to holding/maintaining the Apache connection. My network administrator is saying no, it holds the socket connection in the background and they only need "access" to port 8000. I would agree with them if I was using servlet mode, but I don't think they are correct in socket mode. What port range do I need to make sure they allow through in addition to port 8000? BTW we use all the standard ports in EBS (eg 8000 is the out-of-the-box Apache port). Note also we have have single tier 11.5.10.2 installation on a solaris sparc server, so the ports that the 11i apps needs to interact / connect with itself is not relevant to the question. Also, the IT group (me) will still have access to all ports to do telnet, ssh, ping etc, we are only talking about from our end users's PCs. They are telling me to install Wireshark to find out more, and do some testing which I will - but I want to know what to expect.
Thanks MarvHussein,
Ok I have read the above documentation extensively. One thing that is quite clear is that if I switched to servlet mode, then all traffic goes through the Apache port (in my case 8000) and that would be the only port users need access too -- and this would be like setting up a DMZ or firewall inside the intranet. However, given that I am having performance issues, I need to know how to do this using forms in socket mode.
So for example in MOS 414439.1 it lists the entire ports and port pools. So I've taken that list, and separated it into groups One and Two (see below). My question is: To access EBS in the intranet by users, which of the ports in Group One is needed? And are all of the ports in group Two NOT needed? thanks in advance. Marv.
Group One of Port Pool
Web Listener Port s_webport 8000 ---> this is needed for sure.
Forms Listener Port s_formsport 9000 -------> this seems to be needed for sure.
Forms Servlet Port Range s_forms_servlet_portrange 18000-18009 --> is this needed in socket mode?
Forms Start Port s_frmStartPort 20000 --> is this needed?
Group Two of Port Pool - I believe that users do not need to have access to these ports for EBS, even
in forms socket mode..
Database Port s_dbport 1521
RPC Port s_rpcport 1626
Reports Port s_repsport 7000
OPROC Manager Port s_oprocmgr_port 8100
Web PLSQL Port s_webport_pls 8200
Servlet Port s_servletport 8800
Metrics Server Data Port s_metdataport 9100
Metrics Server Req. Port s_metreqport 9200
JTF Fulfillment Server Port s_jtfuf_port 9300
iMeeting Collaboration Server Port s_imtsrvport 9500
iMeeting Recording Server Port s_imtrecport 9600
iMeeting Monitor (iMon) Port s_imtimonport 9700
Map Viewer Servlet Port s_mapviewer_port 9800
OEM Web Utility Port s_oemweb_port 10000
VisiBroker OrbServer Agent Port s_osagent_port 10100
MSCA Server Port s_mwaPortNo 10200
MSCA Dispatcher Port s_mwaDispatcherPort 10300
TCF Port s_tcfport 15000
OACORE Servle Port Range s_oacore_servlet_portrange 16000-16009
Discoverer Servlet Port Range s_disco_servlet_portrange 17000-17009
XMLSVCS Servlet Port Range s_xmlsvcs_servlet_portrange 19000-19009
Java Object Cache Port s_java_object_cache_port 12345
-- end of port pool list-- -
How to auto open PDF after saving a file?
Hi!!! How y'll doing? I just switch to Mac recently. So can you guys kindly advise how do set auto open PDF file after save as a PDF file.
What am I trying to say is that, I have a excel file and I want it to auto open after I save as PDF file.We are currently having users processing a large number of PDF's and would like to know if this is possible as well. The Save as PDF... option right now does not open the PDF file after it is created.
-
TextEdit css files auto open in Dreamweaver all of a sudden - How can I stop this?
I'm on a Macbook Pro, OS X. Whenever I open a TextEdit css file lately, it auto opens in Dreamweaver. I've never used or saved anything to Dreamweaver so I don't know why this is happening. It hadn't in the past. I need to use TextEdit specifically at the moment, to code files for school assignments.
2 Ways to Change the Default Application to Open Files With in Mac OS X
-
Why is En start transcoding if it just told me that I do not need to?
have HiDef footage that I edited and exported from Premiere CS3 to Encore CS4 using the BluRay High preset.
NTSC, 1440x1080, 23.976 [fps], Progressive
PCM Audio, 48 kHz, Stereo
VBR, 2 Pass, Target 20.00, Max 25.00 [Mbps]
Premiere asked me to save the file and it exported the file as .m4v for video and .wav for audio. Once AP finished transcoding it opened the Encore. Both files are shown untranscoded under the BR Transcode Status column. I transcoded the .wav file, but when I try to transcoded the .m4v file I get the following message:
The file you about to transcode is already legal for Blue-ray. Transcoding will affect its quality.
I click cancel in the dialog, but when I try to build a blue-ray folder Encore starts building with transcoding the .m4v file.
Why is En start transcoding if it just told me that I do not need to? Is there a setting I am missing?Are you sure it's transcoding the .m4v? I have on numerous occasions had Encore CS4 start to transcode the audio that I had just finished transcoding. I seem to have a bug whereby Encore 'forgets' it's audio transcodes, and has to redo them. Could this be happening to you as well?
Maybe you are looking for
-
How to trace the RevTrac carrying changes for a given system table?
Hi everyone! In our company we have a case of a change no one in the team states to have done, therefore we do not know the RevTrac number that carries the changes. Currently, the development system is different from the QA, staging and production sy
-
Help with Inventory Program Buttons & images
I'm supposed to have buttons that move between the items in my program individually showing them one by one and also going to the first item when the last one is reached and vice versa, but I cannot get the buttons to to show even show up. I'm also h
-
Auto-Brightness and Multitasking
Hi, Auto Brightness does not seem to do anything? With the setting both off or on, the brightness stays constantly at the single setting chosen on the slider. Where is the ambient light sensor on the 4th gen, and does it even do anything? Also, multi
-
The specified cluster object MYCLUSTER could not be found
Hi, I'm trying to install NCS on two SLES 11 SP3 servers, but I'm stuck on this. I can install NCS on the first server, and create the cluster object in eDir. I can see the cluster object in iManager after that. But when I try to add the second serve
-
I have problem with a blank new tab
When I open "New Tab" (CTRL+T or just +) it shows me a blank page. Can I change it anyhow so it can be my Search Engine or something like that??? Pls???