XL Reporter Authorisations

I have come to learn that XL Reporter will not work if the user has not the right authorisations in the company.  If the user has not, the XL Reporter tool bar option in B1 will not appear.
Does anyone know or does anyone know where I can find, the exact needs of XL Reporter for it to work?

Hi William,
I'd hope I understand your question correctly. Well it's like this you have to install XL reporter on the server and on each client that will use XL reporter.
After you've installed XL reporter on the clients that are going to use XL reporter you can give people rights to it. You can do this in "Administration --> License --> License Administration". After that you start XL reporter. You have to do this each time you enter SAP B1, you do this in "Administration --> Add-ons --> Add-on Manager".
After you started XL reporter it will appear and you can open it in the topmenu under "Tools --> XL Reporter"
Hope this helps you!
Martijn

Similar Messages

  • BW reporting authorisation using customer exit

    Hi,
    We are planning to implement BW reporting authorisations using customer exit, so that authorisations can be filled at the run time, this is to avoid maintaining huge number of authorisations.
    If any one has implemented this before, Please send me  some documentation for the same. We have BW 3.50 environmnet.
    Regd,

    Hi Anil,
    What kind of authorization do you need for your BPS layout? Please explain this requirement further and I will try to help.
    Your second question is quite good, where do I find the values to fill the user exit too do authorization correctly for each user, right?
    I think this depends heavily on your source system, but a good approach (if possible) is to compare the master data available in the BW system to the logged on user in the system. If not, you will have to maintain data, i.e. in an ODS (like you suggest) in order to have something to work with in the CMOD exit.
    For instance, consider this simple scenario (we can discuss it further if you give more details on your scenario and requirements):
    User ABC belongs to plant 10. User DEF belongs to plant 20. You have an ODS with mapping between usernames and plants.
    <pseudo code>
    In CMOD:
    data: lv_user(8) type c.
    data: lv_plant(10) type i.
    lv_user = sy-uname. "this will give you user's login id
    select single plant into lv_plant from <your ODS>
    where ods_userid eq lv_user.
    L_S_RANGE-LOW = lv_plant.
    L_S_RANGE-SIGN = 'I'.
    L_S_RANGE-OPT = 'EQ'.
    APPEND L_S_RANGE TO E_T_RANGE.
    User ABC will see plant 10 and user DEF will see plant 20.
    Do you have any master data (i.e. 0username) available to map between username and an user number (such as business partner)?
    Hope this helps,
    Petter

  • Reporting Authorisations for reference Characteristics

    I want to set up a specific reporting authorisation for characteristic 0CRM_SALORG which is in my ODS. I notice that this is referenced to characteristic 0ORGUNIT.
    Which characteristic should I make relevant for authorisation and create the authorisation object for?

    Hi!
    if the reports are on 0crm_salORG then create the authorizations on it.
      <i>whats the status of your problem with heirarchies and 0material.</i>
    with regards
    ashwin
    Message was edited by: Ashwin Kumar Gadi

  • Authorisation on IP based on query

    Hi all,
    I have a problem with restriction on Integrated planning queries.
    Starting situation:
    End user role should give report authorisation to the IP cube for all queries.
    Aim:
    Create on same IP cube different queries with IP planning functionalities.
    Authorisation should be based on the query names.
    What I found when trying to do this using combination of S_RS_COMP and RSECADMIN.
    As end user has authorisation to run all reports from the end user role the restriction on queries in an additional role in S_RS_COMP will not work. In RSECADMIN there is no option to restrict on query as 0TCTQUERY is not working as authorisation relevant in BW system.
    Any idea how to resolve this without changing end user role?
    Br
    Stefan

    Hi
    I have the same issue, but cisco have advised me the codecs in the ios routers don't support video yet, but watch this space. I had to spend the money on a 3500e.
    Regards
    dave

  • Authorization for Query Owners

    Dear Friends,
    We have created a authorization using the below values.
    1.Our requirement is users should not be able to change business content queries
    2.They should be able to save as business content queries as Z queries and they should be able to change it according to their requirement.
    3.Users should be able to create their own queries and they should be able to change their own queries.
    First two works well with the below values, but thrid requirement doesn't fullfilled.
    Issue is users able to create/save as query's.But users unable to change their own queries.It says "You dont have authorization to change". Everytime they have to save as a new query and need to change it.
    Please verify the below values and suggest is something we have missed:
    S_RS_COMP:01(Create),03(display),16(Execute),22(Enter,Include,Assign)
    Infoarea:*
    Infocube:*
    Name of a reporting compo:*
    Type of Reporting Component:CKF,REP,RKF,STR
    S_RS_COMP1:02(Change),03(Display),16(execute),22(Enter,Include,Assign)
    Nameid of Repor comp:*
    Type of Reporting Compo:*
    Owner :$USER
    S_RFC:
    Activity:*
    Name of Rfc :*
    Type of RFC:*
    (If we are not maintaining S_RFC getting an error message when opening BEX)
    Thanks,
    Soujanya

    Hi,
    You will have to introduce S_RS_COMP and S_RS_COMP1 a number of times and provide different values for component type, activity and component name.
    There is a good example in 'help.sap.com' - you can see this by following the path:
    SAP BIW -> Data warehousing -> Data warehouse management -> Authorizations -> Authorisation for working with BEx -> Example for reporting authorisations.
    Hope this helps.
    Pinaki

  • Security in BEx Level

    Hi All,
    Is it possible to restrict in a region wise in the BEx Query for single user,
    For a single Bex query,  i need to give region wise authorization for two users.
    1. Region 1 for one user and Region 2 for another user.
    2. And also is there any possiblity in Row wise and Column wise
    Thanks,
    Naresh

    Hi,
    refer below thread
    [http://help.sap.com/saphelp_nw70/helpdata/en/43/a033e0f56e21b5e10000000a1553f6/content.htm]
    [BW reporting authorisation using customer exit;
    Thank,s

  • Copy queries from old user id to new user id

    Hello,
    We have a new userid standard.  One of our power users has quite a few queries created as discovered using table RSRREPDIR.
    Her new id copied all her favorities from old id to new.
    However, she cannot change the old ones since they are under her old id.  The only way is to save as to her new id and modify.
    For most users, this is not a problem but this particular user has several hundred queries.
    Is there a tcode that will mass copy the queries  and replace her old id with her new id?
    Also - on her old id she had created several folders where she had all her different queries.  WHen her new user id was activated, her old one was deleted.  We reactivated it but I believe the folders may have been deleted in the process.  I am not sure if they are stored anywhere?
    Thanks for any help you can provide.
    Lynda

    Hi Lynda,
    You can achieve this by changing the reporting authorisation of that particular user as to the new user id should be able to change the queries made by the old id.
    Check for the authorization object for that user and make the necessary changes
    Hope this helps,
    Cheers,
    Jayashree

  • SDM is unable to get signature details

    I just installed the latest signatures and I get the message: SDM is unable to get signature details from router".
    Any suggestions on how to correct this?

    Hi,
    It is not very clear when you say that user is unable to get any data. Is he getting any authorisation error.
    Please check if the data is auhtorisation relevant and any specific reporting authorisations have been assigned.
    Check the user role if he has same athorisations as you have for the specific infocube or objects.
    Regards,
    Nitin

  • CRM Web UI - Authorisation error for Dashboard report

    Hello
    I am accessing CRM specific BI reports on CRM Web UI for areas like Lead Analysis, Marketing and Campaign Analysis etc, and most of the reports are working fine. But when I try to access a dashboard report (I am not really sure if it is called daashboard report beside the report name- it gives me an Authorisation error saying that the 'User does not have proper authorisations'.
    I have tried by assigning the role SAP_CRM_OR_USER suggested by a colleague, but even then I get the same error. Our Basis team does not have an idea on the exact role to be used.
    Could anyone of you please tell me the exact role to be used in order to see those report on Web UI. Thanks.

    Hi Sven
    I have tried that option of the transaction ORDYWB to activate the reports (this was also suggested in a SAP note i.e. to create a Z report and the code for which was given in the SAP note and upon executing the report, it showed a number of activities which have to be performed and had to implement those activities one by one). But in that transaction all the reports and InfoTypes are active with status 'OK'
    If you could give me the exact role which you have used for those reports, I will give it a shot. Also, in the CRM Web UI, I am unable to see the technical name of the report of the interactive report (dash board report?). If the report was executing in the CRM Web UI, we could see the technical name of the report, but for the non-executing reports, could you please tell me how to see the technical name?
    I have raised this to SAP and looks like even they are having a hard time finding the solution. Thanks.

  • Lots and lots of authorisation checks in a listbox and a report

    Hello,
    I have an usual situation in one page here (Apex 3.0, Oracle 10g r2). I tried to find a solution for it searching the forum but no luck.
    It is a very simple page with an HTML region with some parameters and a plain report region below it. In the HTML region there is a list box based on a LOV, and when I turn the debug on what I see is:
    Hospital <<-- List box label
    0.18: Authorization Check: "60517010643704468" User: "LCABRAL" Component: ""
    0.18: Authorization Check: "60517010643704468" User: "LCABRAL" Component: ""
    0.18: Authorization Check: "60517010643704468" User: "LCABRAL" Component: ""
    0.18: Authorization Check: "60517010643704468" User: "LCABRAL" Component: ""
    0.18: Authorization Check: "60517010643704468" User: "LCABRAL" Component: ""
    The output goes on and on... it is like the authorisation is being checked for each row in the LOV.
    Same thing in the report itself (it has a column which display format is lookup LOV, based on the same LOV above):
    0.21: show report
    0.22: determine column headings
    0.22: activate sort
    0.24: parse query as: ENQUIRY_LOG
    0.24: binding: ":P400_START_DATE"="P400_START_DATE" value="23/09/2009"
    0.24: binding: ":P400_ADVISOR"="P400_ADVISOR" value="-1"
    0.24: binding: ":P400_HOSPITAL"="P400_HOSPITAL" value="34"
    0.24: binding: ":P400_SHOW_BOOKED"="P400_SHOW_BOOKED" value="Y"
    0.24: binding: ":P400_END_DATE"="P400_END_DATE" value="30/09/2009"
    0.24: print column headings
    0.24: rows loop: 50 row(s)
    0.24: Authorization Check: "100484744444833563" User: "LCABRAL" Component: ""
    0.25: Authorization Check: "100484744444833563" User: "LCABRAL" Component: ""
    0.25: Authorization Check: "100484744444833563" User: "LCABRAL" Component: ""
    0.25: Authorization Check: "100484744444833563" User: "LCABRAL" Component: ""
    0.25: Authorization Check: "100484744444833563" User: "LCABRAL" Component: ""
    This is not causing any problems per se, but I am a bit suspicious about it... Any ideas?
    Thanks!
    Luis

    Luis,
    The Hospital select list item's LOV query is:
    SELECT name, bu_id FROM
    WITH access_level AS (SELECT pkg_cel.is_authorized('NEC') nec,
    pkg_cel.is_authorized('MULTI') multi,
    pkg_cel.is_authorized('Users') users FROM dual)
    SELECT name, bu_id
    FROM commons.co_business_units BU
    , access_level AL
    WHERE bu.group_bu = 1
    AND bu_type = 'H'
    AND ((al.users = 1 AND BU.BU_ID = v('USER_BU_ID'))
    OR (al.multi = 1 AND (BU.BU_ID
    IN (SELECT BU_ID
    FROM NEC_USER_BUSINESS_UNITS
    WHERE USER_ID = v('USER_ID'))
    OR BU.BU_ID = v('USER_BU_ID')))
    OR al.nec = 1)
    ) order by 1
    See the reference to pkg_cel.is_authorized('NEC'). This is probably calling apex_application.public_role_check which invokes the authorization scheme logic.
    Let me know if that doesn't get you on the right track.
    Scott

  • Different authorisations in different reports?

    Hello,
    I'd like to ask: how can I assign different authorisations for the same user for different reports?
    Example:
    I have a report of sales by customer, additionally groupped by Key Account Manager (KAM)
    KAM
    ....\_____ Customer
    and another one, where data is presented for Customers, groupped by Consultants (CON):
    CON
    ....\_____ Customer
    Both reports are based on the same multiprovider.
    Moreover, both KAM and CON are IObjects which have Customer as a reference char. I'd like to present reports to Key Account Managers and Consultants, showing their sales to respective Customers. But only theirs, not other KAMs' or CONs' sales.
    The point is - one person can be a KAM for one sale, and a CON for another one (although, those are two separate IObjects, they share master data with Customer).
    I have therefore made an authorisation for one user, giving him rights to view 'his' KAM, and ":" CON. After that, I have used this authorisation in a role, and assigned it to the user. This way, the report No. 1 provides correct data - only sales where KAM is the chosen user, regardless of values of CON (the IObject itself is not even present in the query, therefore the ":" has been used).
    How can I arrange the authorisations, so that this user can open the second report, presenting him sales to customers for which he was assigned as a CON?
    To put it shortly:
    How can I give user 001 rights to view all objects AA and only one value of object BB in report ABC1
    but give him rights to view only one value of object AA and all values of object BB in report ABC2?

    Hi,
    OK! try this following work around:
    Make it language dependent again . and unmap in transfer rules  ( cross symbol ).
    remove the info object in right panel too. and write the routine as follows.
    IF TRAN_STRUCTURE-sprache = ' '. ( write code of japanese langauge )
    And tran_structure-sprache = ' ' ( write code for chinese langauge )
      RESULT = 'e'.
    else.
    RESULT = TRAN_STRUCTURE-sprache.
    endif.
    activate the transfer rules and try uploading data again!
    Thanks,
    Ravi

  • Authorisation report

    Hi Gurus
    Is there any report in SAP for checking authorisation of all employee in one shot   or
    OR
    Checking that how many SAP user id is using a particular transaction or infotype.
    Regards
    Waseem

    SE84
    Tools --> Administration --> User Maintenance --> Information System
    Information System for SAP R/3 Authorizations
    check this

  • Authorisation check in report

    Hi ,
    we have developed a z report which is fetching grade from infotype 8 .All the users here dont have authorisation for infotype 8.Is it possible somehow that the users who don have authorisation for infotype 8 can rum that report.Right now when they are trying to run the report its showing 'No Authorisation for infotype 8'.Or is there some other place from which grade can be retrieved .
    Regards
    Saurabh

    Create an authorisation object (SU21)
    Put an authorisation check for this object in your report (AUTHORITY-CHECK)
    Create a role that contains this object (PFCG)
    Assign this role to all the users who require access to the report (SU01).
    <REMOVED BY MODERATOR>
    Edited by: Alvaro Tejada Galindo on Feb 27, 2008 2:07 PM

  • Authorisation in Z-report

    Hi All
    I have created Z-report, i want to restrict  Access in Z-report using authosrisation object on field plant.
    I want to use standard authorisation object only.   This report must be used by specific business unit  plants users.
    I dont want to hardcode  users plant in program.
    How to achieve it?

    Hi,
    Can you let us know what information is being displayed in this Z report ?
    You will have to use the abap syntax
    AUTHORITY-CHECK OBJECT <authorization object>
    ID <werks> FIELD <value>.
    There are quite many standard objects, so depending on which data you're reading / displaying we need to pick the object accordingly.
    Hope it clarifies.
    Regards,
    Vivek

  • Authorisation Group and Reports

    Hi experts,
    I need to maintain a new authorisation group for a new report that I am creating. I know authorisation group can be maintained in the table TPGP and can be assigned from there. But I wanted to know if there is any other way of linking a report to a particular Authorisation group.
    Thanks,
    Kumar

    Hi Max,
    Thanks for the reply. An already created Authorisation group can be assigned in the attributes. But what I wanted to know was to create that authorisation group, Is the only way possible is maintain it in table TPGP or is there any other way?
    Thanks,
    Kumar

Maybe you are looking for

  • Why do I need to reset my Airport Express multiple times a day?

    I purchased an Airport Express (AE) in 2008.  Ocassionaly since I've owned the device, I've had a problem connecting to it via iPod touch, iPhone, Macbook Pro, Macbook, etc.  I would see the AE in my wifi router list, I just couldn't connect to it. 

  • How do i get a refund on my iCloud storage plan ad i downgraded

    I recently upgraded my storage plan thinking i needed more on my iCloud's but looks at the storage and had not even used half so i downgraded a few minutes later, how do i get a refund on the money i didn't need to spend on a bigger plan? Thanks Mega

  • Conceal data item (forms generation)

    Hi How could I generate a conceal data item (for example, for entering passwords)? I can't find any property, and the documentation says that the conceal form item property is not set by designer... Thanks

  • Creating a OJMS topic and connecting to BAM

    Hi, I have in our database created a topic for errors: BEGIN dbms_aqadm.drop_queue_table('IPLERRORQTAB',true); END; BEGIN sys.dbms_aqadm.create_queue_table ( queue_table => 'IPLERRORQTAB' , queue_payload_type => 'SYS.AQ$_JMS_MESSAGE' , sort_list => '

  • How to add folder from KM content to Portal Favorites for selected users

    Hi all, I have cretaed  a folder in KM content (In documents) for uploading implementation related ddocuments. how to add this folder in "Portal Favorites" of selected users only. Please guide. Thanks in advance.