XL Reporter & Conditional Formatting
I am building my Income Statement / P&L in XL Reporter, and I want to draw attention to any items out of the ordinary. I have each period in two columns, the 1st column being the actual amount and the 2nd being the % of revenues. I want to do conditional formatting on only the second column, so if it is off the average % of revenues, I'll notice it. The problem is that when multiple periods are expanded, Excel applies the conditional formatting to both columns. How do I eliminate that and only apply to one of the two expanding columns?
I'm using Excel 2007 and here is my basic table layout:
C column - $ figures
D column - % of revenue
(these two columns are repeated for the selected number of periods)
E (or whatever column it ends up being) - sum of $ figures
F (or whatever column it ends up being) - average of % of revenue
F1 - The percentage difference from the average that I want highlighted
The conditional formatting that I have set up is applied to column D (and should be applied to the new F, H, etc):
= D4<($F4*(1-$F$1))
Another problem I have run into with this is that it keeps the $F column as $F, regardless of how many periods are included. I can't leave it without an absolute reference because then each period refers to a different column for the average. The easiest solution I've thought of is putting my sums on the left, but I'd rather not do that.
Similar Messages
-
XML Reports Conditional Formatting
Hi....
Am having an issue on XML Conditional formatting, that i want to set formatting for number field for 4 conditional... is it possible to achive ?
this will be really great if i get can any assistance on this?.
Thanks in Advance!!!
-Suresh.S
Edited by: user13029638 on Aug 28, 2012 8:22 AMMaybe another thread on this forum can help
BI Publisher conditional formatting
It's in the BI Publisher subforum -
Conditional formatting in the chart does not work after 10g to 11g upgrade
W e have upgraded from 10g to 11.1.1.6.8 recently. For all the reports conditional formatting for charts is not working for us which used to work in 10g.
While researching , i have found that advanced xml needs to be modified. So i changed xml where there is 'untypedLiteral' to 'decimal' and saved the report. Inspite of saving , xml wouldnt change . It still shows as untypedLiteral.
I also tried to delete the conditional format and recreate again. But still it wouldn't work.
Please advise.W e have upgraded from 10g to 11.1.1.6.8 recently. For all the reports conditional formatting for charts is not working for us which used to work in 10g.
While researching , i have found that advanced xml needs to be modified. So i changed xml where there is 'untypedLiteral' to 'decimal' and saved the report. Inspite of saving , xml wouldnt change . It still shows as untypedLiteral.
I also tried to delete the conditional format and recreate again. But still it wouldn't work.
Please advise. -
Report generation toolkit conditional format - how to?
Hi
We are using the Report generation toolkit (2010 version), and have a question regarding this tool.
I see functions for setting the number format, but not a conditional format. Does this not exist?
http://zone.ni.com/reference/en-XX/help/372120A-01/lvoffice/excel_set_cell_format/
This page refers to an example which from the name sets a conditional format. However as I understand it, this example is setting a custom number, not a conditional format.Hi,
the simplest way to do this I guess you can provide a template for your Excel sheet, where you can set the conditional format there.
From LabVIEW you can just send the values into this sheet-template.
Maybe you can try these if you want
http://forums.ni.com/t5/LabVIEW/Using-conditional-formatting-in-excel-through-LabVIEW-activeX/td-p/1...
http://forums.ni.com/t5/LabVIEW/Excel-Colour-properties-modified-via-LabVIEW/m-p/573748?query.id=218...
Regards,
Yan. -
Conditional Formatting with multiple characteristics in report designer
Hi,
I'm trying to build a report with images in conditional formatting for two characteristics (=columns). Each of which can have one of the following three status values:
1 - green
2 - yellow
3 - red
For each status value i want to show a different image (traffic light). It works fine with only one characteristic. The conditional formatting creates three details rows in the row pattern (one for each status value) and depending on the status value the corresponding details row with the traffic light is shown.
But if there is more than one characteristic with conditional formatting in the report it only works with a different row for each characteristic value, as the two characteristics belong to different group levels of the row pattern. That means I finally have 2 rows showing the two status values.
To show them all in one row, which is the goal, I have put all the conditional formatting definitions (6=3 for each characteristic) into the detail rows of the row pattern.
But then for one characteristic incorrect images are shown, e.g. although the status value is red, a green traffic light is displayed, because the status value of the other characteristic is green.
Obviously the conditional formatting only works with the characteristic, for which the details rows in the row pattern have been created.
Any ideas how I can manage to show all the conditional images in one row?
Thanks in advance.
Regards,
SvenSven,
your scenario is not supported yet.
Right now, a conditional format is based on one condition.
In the future it is planned to allow more conditions to be applied to the rowpattern, using "AND, OR" operators.
The availability of the feature will be announced via the BI Functional Enhancement List (see BIFAQ)
regards, karim -
Issue with conditional formatting in XML publisher report
Hi All,
I am working on a XML report where in I am required to use conditional formatting to highlight changes, if there is change in any of the column value. The condition is required to be implemented on a text column as well as a number column. I have tried to use the conditional formatting available in the BI Publisher Release 10.1.3.2, wherein I have compared the two columns, and when they are not equal to, then formatting should change to red color; but the same is not working in the excel output.
Can anybody help here?
Thanks,
NitinCross conditional formatting ie formatting based on some other column is not supported in pivot view.
There are some workaround.See if that helps
http://www.obinotes.com/2010/03/pivot-view-conditional-formatting-in.html
Regards,
Sandeep -
Does Conditional Formatting does not work in HTML report editor - BO 4.1
Hi
I have just upgraded to BO 4.1 from BOXI 3.1
I see conditional formatting option is grayed out for me in BO 4.1
I dont have java installed and running launchad on HTML (Preference ->WEBI-> Modify Report -> HTML )
Is there any relation between Applet option and Conditional formatting or is there anything wrong with Access which i need to correcr explicitly as compared to BO 3.1 ?Hi Saurav,
This is expected behavior; We can modify the Conditional formatting only though Applet mode or using Webi Rich Client.
For more feature differences between Viewers go through following link;
http://scn.sap.com/community/businessobjects-web-intelligence/blog/2013/12/16/feature-differences-between-the-web-intelligence-clients-bi41-sp02
Regards,
Veer S. -
Conditional formating in report painter (GRR2)
Hi all,
An end user ask me if it's possible to do a conditional formatting in a cell of report painter (run with GRR3) if the value is true (i.e. as in excel, you can colour a cell if it's less than zero and so on). I know that it's possible with the BEx (for SAP BI), xcelsius, crystal reports and surely with bussiness object. I can see that it's only available do the format for the all column or for a line, but I don't find the option for a cell with a condition (surely because it isn't available).
Please, confirm me if it is not available, because I'm a long time looking for a reply but I only find info about BEx, xcelsius and so on (nothing related with report painter, GRR2 and so on). But if it's possible, please let me know how to do it.
Thanks in advance
Best regards,
EduardoHi,
I don't think that we can put the conditional formula. but we can do the calcualtion by row wise or column wise.
Thanks. -
Conditional formatting in report designer.
Hi All !
What is conditional formatting & how to do it ?
does it act like condition which we do in BEX query designer ?
Can we restrict values using this at the report designer level ?
Regards
Tom.Hi,
Conditional Formatting: You use this function to set a design that deviates from the design for selected characteristic values, hierarchy nodes, and so on, that is set by the default row patterns.
Conditional formatting can only be applied to characteristic values in dynamic sections of a data provider. A query (or query view) with one or more characteristics in the drilldown forms the basis of a data provider with a dynamic section.
Take a look at the URL below:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/f4b8c3a7dd7065e10000000a1553f6/frameset.htm
Regards,
Kishore
Message was edited by:
Kishore Sivakumar -
Graphic/Image not displayed with conditional formatting in Report Designer
We are facing problems with displaying an image in a conditional formatting in the Report Designer. The image itself is in the mime repository and can be displayed in the report if no conditional formatting is used. But if it is used the image doesn't appear in the report.
Backend setup: SP 8
Frontend setup: Patch 8, hotfix 2, Revision 95
Any help is highly appreciated.
SvenHi,
I could not reproduce your problem in internal SP8 system. Also images in rows with conditional formatting are displayed.
Do you get any errors after the execution in the portal?
Try to use exactly the same image in both rows (drag-and-drop with CTRL key pressed).
If then your problem still occurs, open a customer message. Describe your problem in detail and write technical name of the report you used.
Regards, Karol -
Conditional Format in crosstab report
Hello All,
Is it possible to do a condditional format in cross tab report.It works for a table but not crosstab report.
Basically my report is like this
Day1 Day2 Day3 ......Day 31
Jan 10 20 -1 60
Feb -1 45 78 -1
Mar 23 -1 12 12
Dec -1 23 67 78
I want to put in red all those negative values or put some text.If insert conditional format,it applies only for the first month,it does not apply for other months.
Is conditional format not possible in crosstab report?
ThanksHope the following helps...
I tested using sample xml
<ROWSET>
<ROW>
<DAY>Day 1</DAY>
<MONTH>Jan</MONTH>
<VAL>8</VAL>
</ROW>
<ROW>
<DAY>Day 2</DAY>
<MONTH>Jan</MONTH>
<VAL>128</VAL>
</ROW>
<ROW>
<DAY>Day 3</DAY>
<MONTH>Jan</MONTH>
<VAL>88</VAL>
</ROW>
<ROW>
<DAY>Day 4</DAY>
<MONTH>Jan</MONTH>
<VAL>-8</VAL>
</ROW>
<ROW>
<DAY>Day 1</DAY>
<MONTH>Feb</MONTH>
<VAL>12</VAL>
</ROW>
<ROW>
<DAY>Day 2</DAY>
<MONTH>Feb</MONTH>
<VAL>0</VAL>
</ROW>
<ROW>
<DAY>Day 3</DAY>
<MONTH>Feb</MONTH>
<VAL>-88</VAL>
</ROW>
<ROW>
<DAY>Day 4</DAY>
<MONTH>Feb</MONTH>
<VAL>-11</VAL>
</ROW>
<ROW>
<DAY>Day 1</DAY>
<MONTH>Mar</MONTH>
<VAL>-20</VAL>
</ROW>
<ROW>
<DAY>Day 2</DAY>
<MONTH>Mar</MONTH>
<VAL>12</VAL>
</ROW>
<ROW>
<DAY>Day 3</DAY>
<MONTH>Mar</MONTH>
<VAL>99</VAL>
</ROW>
<ROW>
<DAY>Day 4</DAY>
<MONTH>Mar</MONTH>
<VAL>32</VAL>
</ROW>
</ROWSET>Crosstab structure...
(1,1)<?horizontal-break-table:1?>
(1,2)<?for-each-group@column:ROW;./DAY?><?DAY?><?end for-each-group?>
(2,1)<?for-each-group:ROW;./MONTH?><?variable@incontext:G1;current-group()?><?MONTH?>
(2,2)<?for-each-group@cell://ROW;./DAY?><?if:($G1[(./DAY=current()/DAY)]/VAL)<0?><?attribute@incontext:background-color;'Red'?><?end if?><?($G1[(./DAY=current()/DAY)]/VAL)?><?end for-each-group?><?end for-each-group?>In the IF statement either you can format the color or put some text.. -
Apply conditional formatting when a report is exported to CSV format
Hello
OBIEE dasboard has the option to export the report data to CSV format.
But the problem is that on some columns of the report, it uses various different types of conditional formatting that tells, what to display when data is equal to one of those edge cases. So hence the report on the dashboard page shows accordingly which is fine.
But when the report is exported to CSV format, no conditional formatting is applied and all the raw data is shown without any formatting.
Is there any way to make sure that the conditional formatting is applied even in the data exported to CSV format.
thanksCSV is supposed to be a data dump .. i dont think you can have formatting saved when u download csv file.. try downloading it to excel and changing it to CSV
-
Conditional formatting in Webi report
Hi,
I have a requirement wherein I need to conditionally format column to make the coulmn value "red colored" as per a certain condition and also need to display a small image next to the column value. Does anybody have an idea to achieve this?
Thank you,
boe user1Hi,
You can use Alerters for the conditional formatting.
Click on the Alerter icon from the tool bar.
New-> define condition -> click ok for default formatting else click on format.
You can define any formatting to the column values you want e.g you can change the font color or you can change the back-ground too.
To display a image you can add one more column and insert it as a background image. If this is also conditional then again insert it using alerter or you can write if else formula with image url.
Regards,
Rohit -
Check for null values in conditional formatting when no rows returned.
I have a report that is showing facts for different months.
For some months there is no row in the facts table.
But in the report, I have to show a * when there is no data.
If there is a row in the facts table with null value for data, the conditional formatting successfully shows a * when data is null.
But when no row is present in the facts for a particular month , conditional formatting is unable to detect any null, as none exist.
How we can check that no rews returned for a particular month and then show *?
thanksHi,
which obiee version r u using?
My Blog ref:
http://obieeelegant.blogspot.com/2011/06/replacing-null-as-0-in-obiee.html
in obiee10g its working fine.expect obiee11g
also see the bug reference
How to replace null as 0 in obiee11g pivot table view?
obiee11.1.1.6.0 also have the same issues.
Thanks
Deva -
SSRS 2012 Conditional Formatting Color Issues When Exporting to Excel
Hi all,
We recently upgraded to SQL 2012 from SQL2008 R2. I'm having a strange issue with SSRS2012.
One of the report has conditional formattings on cell background colors. Everything works fine when render the report in browser or preview mode. However, the conditional formatting stop working when export the report to Excel (no issues if
export to pdf). All cells are high-lightened with pre-defined color although it should only high-lighten those cells that fulfil the condition.
Has someone encountered this issue before ? Thanks for any help.Hi ZZ02,
I have test the scenario in my testing environment, however, everything goes well when exporting to Excel format. The issue might be related to the expression for the conditional background color. To make further analysis, please post the expression as well
as the report design structure.
Additionally, in SQL Server 2012 Reporting Services, the Excel rendering extension renders a report to the native format of Microsoft Excel 2007-2010, the format of which is ExcelOpenXML. By default, the previous version of the Excel rendering extension,
compatible with Microsoft Excel 2003, is disabled. At this time, I suggest that you enable the Excel 2003 rendering extension by modifying the RSReportServer.config file. After that, the Excel 2003 rendering format will be available on report manager (not
available in Report Designer). So, please export the report from report manager and check the result again.
For more information about enable the Excel 2003 rendering extension, please see:
http://social.msdn.microsoft.com/Forums/en/sqlreportingservices/thread/0713de27-dcc0-4e51-81ac-5272647d171f
Regards,
Mike Yin
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Mike Yin
TechNet Community Support
Maybe you are looking for
-
I've been trying to figure out how to connect to iSQLPlus or Enterprise Manager from outside my network. Is this possible? I've opened up port 1158 and 5560 on my router, and i've setup a domain name through a DNS so where my website works fine (it's
-
Project going from CSV files to XML files
What is the best XML parser to use now? I do not want to tie us into something that is stale or not up to date. Dom4J hasn't been updated since May of 2006. Any advice is appreciated.
-
Creating BP in multiple sales areas
Hi Friends, In SD we can extend a customer master to multiple sales areas. But in CRM once I create a BP with sold to party role, I am able enter only one sales area. And if I change it, the previous sales area is gone. How to do this. regards
-
Hi, I am having a weird issue. When I scroll down on a window (in any program) the scroll resets to the top position. If I let go of the mouse or trackpad the scroll goes back to the top position. I am using 1.6.8 on MacBook Any suggestions? Thanks!
-
Background Layers Locked on all Images
All of my images are coming up with background layers locked. This was not a conscious setting on my part. How do I unlock them?