XL reporter Error In Windows 2007

Good Day!
I was trying to generate report from XL reporter, but upon opening, there's an error message "an error occured during the process "Report Initialize". Description: (666) Error! Unable to get document! Type: 22
Cause: Automation Error
XL reporter startup Failed!
Can anyone help me regarding this? Thanks
Sandra A. Callanta

Hi Sandra ,
You may check these threads first:
XL Reporter is not working
Error on starting XL reporter in SAP B1 2007B pl 08
Thanks,
Gordon

Similar Messages

Crystal Report Error in Windows Server 2012 - Load Report Failed

Badly needed help regarding the above topic. Thanks in advance for helping.
We have a web application experiencing this error after deployment in WinServer 2012 IIS 8. Previously, the application was deployed in WinServer 2003 but we dont experience any errors like this. We tried searching the net for solutions and these are the following things we've try doing so far.
- Installed Crystalreportsviewer13 64 bit in Server. After that, transferred the asp_net client folder in the IIS folder same level of our application.
- We discovered that upon browsing the asp_net client in IIS itself, error 500.24 is appearing in the server. Checked the permission for folder asp_net client. Add IIS_USR permission read execute and write on the folder and still same Load Report Failed.
- Next we tried integrating the crystalreportsviewer13 inside the application same Load Report Failed error.
- Installed Service Pack 8 for CrystalReport but to no avail.
Is there any way to get the real error behind the "Load Report Failed" error? Also, is there any other way to determine what else can be done to resolve this issue? Thanks in advance.

Hi Jesse,
Use a try/catch block and see if this gives you more info:
catch (Exception ex)
MessageBox.Show("ERROR: " + ex.Message + " ;" + ex.InnerException.Message);
Response.write of course...
Make sure you have permissions set for sharing the report folder also, could be simply a permission error on the report folder.
Fiddler may give you more details also
Don

After writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present

after writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present.
My pc is based on asus motherboard. Labview 7 and Windows 2000 sp4 installed.
The error message continue also if i stop the application that generated report on a: .
I've got this problem only on a pc: on other machines i don't have this problem (Labview only continues to access floppy but it doesn't show any window).
Find below an example: first press the button to create a report on a: then remove the floppy, after 30-35 sec i've got the error message
Attachments:
prova.vi ‏55 KB

Hi,
I tried your vi: I don't get any error message after removing the disk but LV7 keeps on accessing the drive at regular intervals even if you stop the vi and close it!!! This is not supposed to happen.
The only way to stop it is exit LV7.
If you don't use the file dialog and you wire a full path, you don't get any problem.
I also created a very simple vi that conditionally writes a text file on a: and I got the same behaviour.
This problem occurs only with LV7, I tried the same examples in LV6.1 and everything was fine.
If anybody wants to try I attach this simple example,
Alberto
Attachments:
salva_testo1.vi ‏22 KB

Error message when displaying a report in a windows form

Hi,
use Cr 2008.SP3 Fixpack 3.5,
Visual Studio 2008 prof. editon version 9.0.30729.1 SP,
:NET Framework 3.5 sp1
vb.net 2008
when displaying a report in a Windows form sometimes the following error message appears
System.NullReferenceException: Object reference not set to an instance of an object
   bei CrystalDecisions.Windows.Forms.PageControl.OnMouseMove(MouseEventArgs e)
   bei System.Windows.Forms.Control.WmMouseMove(Message& m)
   bei System.Windows.Forms.Control.WndProc(Message& m)
   bei System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   bei System.Windows.Forms.ContainerControl.WndProc(Message& m)
   bei System.Windows.Forms.UserControl.WndProc(Message& m)
   bei CrystalDecisions.Windows.Forms.PageControl.WndProc(Message& m)
   bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   bei System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
The rest of the error message is in german:
************** JIT-Debuggen **************
Um das JIT-Debuggen (Just-In-Time) zu aktivieren, muss in der
Konfigurationsdatei der Anwendung oder des Computers
(machine.config) der jitDebugging-Wert im Abschnitt system.windows.forms festgelegt werden.
Die Anwendung muss mit aktiviertem Debuggen kompiliert werden.
Zum Beispiel:
<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>
Wenn das JIT-Debuggen aktiviert ist, werden alle nicht behandelten
Ausnahmen an den JIT-Debugger gesendet, der auf dem
Computer registriert ist, und nicht in diesem Dialogfeld behandelt.
Thank you
Otto

Can you define "sometimes" a bit more?
Is it after a number of runs of a report?
Is it on a particular report?
Is it after you do certain operations on the report (paging, zooming, dill down, print, etc., etc.)?
Can you duplicate the issue if you isolate the report to a new test app?
Did you happen to notice if the issue existed prior to FP 3.5?
Is this on your dev computer or a client computer?
OS?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Windows 2007 Update error 8000FFFF

My new Windows 2007 Dell laptop does not install any updates due to error 8000FFFF. I tried windows Fixit but that doesn't solve it. Can you help me?

Hi,
Could you please have a share about what is the new Windows 2007 Dell laptop's operating system? Windows 7?
For the error code 8000FFFF, please see if the following KB could help here:
Error code 0x8000FFFF when you download updates on a Windows Vista-based computer by using Windows Update or Microsoft Update
In addition, here is a thread talking about this error code, the solution suggested is to do an inplace upgrade or a reinstall. See:
Windows Update fails with error code 8000FFFF
Best regards
Michael Shao
TechNet Community Support

I downloaded the icloud software on my computer in order to sync calendars and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calenders - can anyone help with this?

I downloaded the icloud software on my computer in order to sync calenders and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calendars. I downloaded it for the first time a month ago and had it working but it stopped syncing, so I deinstalled the iCloud software and reinstalled, but keep getting the error message "Your setup couldn't be started because of an unexpected error. What do I do now? Can anyone help with this?

Hello easbda,
Thank you for providing the details of the calendar issue you are experiencing with your iPhone. I recommend following the steps in the section titled "Troubleshooting on Microsoft Windows (Microsoft Outlook)" in the following article to assist with syncing your calendar events between your devices:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Best,
Sheila M.

Can't start reports server on Windows Server 2003 SP1 Error code 13

Hi,
This morning I figured how to start the rwserver using the command, rwserver server = repsrv. This works using XP pro physical machine but now I am trying to perform the same task on a Windows 2003 virtual machine.
I have used the line:
rwserver -install repsrv.
To add repserv to the list of available services in computer management. This has appeared as an avaiable service and so I click to start it, unfortunately every time I do I get the error message:
"Windows could not start the OracleOraAppServer10g_home1Reports [repsrv] on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 133."
I am assuming this is a security issue with Windows 2003 but I can't find a cure anywhere.
Thanks in advance for any help that anybody is able to provide
Cheers
Daniel

Hello,
Step 1) Check that you can start the reports server from a "DOS Window" :
rwserver server=repserver
Step 2) Check the PATH set for rwserver.exe when it is running as a service
Some sysinternals utilities like Process Explorer / filemon may help :
http://www.sysinternals.com/
Regards

After installing Crystal Reports XI on Windows 2003 server with one error..

After installing Crystal Reports XI on Windows 2003 server with one error... REGSVR sapldap.dll error. I had to regsvr it manually. Crystal still didn't run. Found out that Crystal Reports XI will not run until you change DEP to protect only windows program and services. Thanks.

Thank you for sharing your finding. Very much appreciated.
The DEP is a known issue and it is documented in [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Crystal Reports XI was not compiled with the nx flag as it released before Windows XP Service Pack 2 or Windows 2003 Service Pack 1.
As for the sapldap.dll. I'm not sure where this is coming from. I do not see this dll on my install, however it does come with the SAP portal integration kit. So I'm not sure if that is flying around somewhere on that server(?)
Ludek

WMI __SystemSecurity class GetSecurityDescriptor method reports error 0x8004101d Unexpected error on Windows 2008 R2 for WMI namespace "\root\cimv2"

WMI __SystemSecurity class GetSecurityDescriptor method reports error 0x8004101d Unexpected error on Windows
2008 R2 for WMI namespace "\root\cimv2"
On Windows 2008 and Windows 2012 R2 GetSecurityDescriptor works fine.
Thanks,
Sandygg
Dev

Hi Anna,
No event getting generated under Application / Security, but following event was reported under Microsoft-Windows-WMI-Activity/Operational
log.
Id = {01EAEC48-F800-0001-5A81-6ADB7E6CD001}; ClientMachine =
sever2008r2; User
= sever2008r2\user;
ClientProcessId = 12580; Component = Unknown; Operation = Start IWbemServices::ExecMethod - root\cimv2 : __SystemSecurity::GetSecurityDescriptor; ResultCode = 0x8004101d; PossibleCause = Unknown
Will let you about WMI Diagnosis tool result.
Thanks,
Sandy
Dev

Error: The Windows Cryptographic Service Provider reported an error Error code 3221225594

Hi
When I want to digital sign an inteligent pdf I received this error: The Windows Cryptographic Service Provider reported an error Error code 3221225594 and I couldn't sign. I use adobe 10.1.1 and my operating system is windows server 2008. Please help me to solve the problem...thank you

check the patchdownloader.log file - it can be a permission issue on the folder where you store the updates.
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

Incoming mail error in window XP

Hi,
I have an issue in outlook 2007 or 2010 in windows XP machines.
Receiving' reported error (0x800CCC1A) : 'Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator or Internet service provider (ISP) for additional assistance.'
We are getting the error message given above while downloading emails through POP3 port:995 (Encryption type SSL) in Windows XP professional(OS) with Microsoft Outlook 2007 or 2010. For you information we are able to send emails successfully through all ports 587/465(encryption type SSL/TLS) in Windows XP professional(OS) with Microsoft Outlook 2007 or 2010.
If we use windows7 machine with same settings of POP3 and SMTP, it is working perfectly.
we are facing this issue after disabling SSLv3 in mail server from vulnerability. It seems to be
the older operating systems do not support TLSv1 since SSLv3 is disabled.
Please help me on this.
Thanks,
Uday

Hi,
Contact the ISP if they provide an alternative Port that you can try(Such as 110).
We can create a new profile to setup the account, go to Control Panel -> Search for "Mail" and open it -> Show Profiles -> Add.
For your reference:
How to create and configure email profiles in Outlook
http://support.microsoft.com/kb/829918/en-us
Currently I can't confirm if Windows XP supports TLSv1, please make sure your have applied all the Updates for Windows XP. Anyway, updating Windows to a later version is suggested.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

I cannot get on itunes keeps saying error 7 windows error 193

i cannot get on itunes keeps saying itunes was not installed properly error 7 windows error 193

Hi there Crippsie!
If the error provided from iTunes is giving you an error code of 3001, -42110, or 5103, then you will want to see the article linked here for more information on that issue:
iTunes: Possible iTunes Store errors
http://support.apple.com/kb/ts1424
After reviewing that article, if you are still having issues, then you will want to see this link to report an issue with the rental that you have requested:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Thanks for using the Apple Support Communities. Have a good one!
-Braden

History report error: | An Exceptional Error occurred. Application exiting. Check the log file for error 5022

Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.

wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account.

Report error:ORA-06502: PL/SQL: numeric or value error: character to number

The oracle application express environment is created by installing the HTTP Server on the windows server and the application express 3.2.1 components on the 11.1.0.7 oracle database on UNIX. The installation is successfully and have not seen any issues during the installation. After completing all the steps, when tried to login and click the application builder or workspace components, I see the error message
report error:ORA-06502: PL/SQL: numeric or value error: character to number.
This error message is seen on most of the pages when trying to accessed and not able to understand the reasons behind it. Its a brand new environment setup and not even presented to developers to test it.
Below error message is always seen when trying to access most of the components like application builder, schema comparison and some other tabs. Please advice
report error:
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Edited by: user589320 on Jun 9, 2011 5:17 PM

I think its better you use APEX 4.x version ratherthan using old version.
You will get more features and some bug fixes and also it's easy for you to get some help when you need.
* If this answer is helpfull or correct then please mark it and grant the points.

Unable to load report error

Hi
This started with an asp.net application which I have been maintaining for several years, on an XP 32-bits box. Alas, the box died, and I have acquired a new Development machine, now with Windows 7/64-bits. I have installed Visual Studio 2010 and Crystal reports (13.0.,9), including runtime for 32 and 64 bits.
I got the "unable to load report" error, and I think I have tried everything I could find on the web related to solving this issue.
Finally I got Down to creating a new dummy asp.net application with a dummy report just displying the text TEST. This report Works fine when run from within VS, but if I deploy it to the web server on the Development machine I also get the unable to load report failure.
I believe this is a configuration issue. The application has run fine for years, I just can't get it to Work on the new development machine.
Please help
Peter

Make sure that process has read / write rights to the %TEMP% folder. Process Monitor may help.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

XL reporter Error In Windows 2007

Similar Messages

Maybe you are looking for