XL Reporter Error: Permission denied
Dear all expert,
I'm having problem when running xl reporter. The error is "could not start Microsoft Excel. Micosoft Excel is required to start XL Reporter, Error, Permission Denied..There is already installed microsoft excel version 2007 and I already set-up the macro settings.
Pls help
Hi
Remove the XL reporter and Office both on the Client Machine.
Install Office 2003 or 2007 and then again install XL reporter.
Hope this will solve the problem
Ashish Gupte
Similar Messages
-
XML File in External Table - OS error permission denied.
Hi.
10g R2, Red Hat Linux
I'm using the article (see below, taken from http://www.dbazine.com/olc/olc-articles/scardina1 by Mark Scardina) to create an external table where I'd store my XML file.
So, I
1. Created a directory xmlfile_dir
2. Granted access to needed db user
3. Created the table
CREATE TABLE relayxml_xt (doc CLOB)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER
DEFAULT DIRECTORY xmlfile_dir
ACCESS PARAMETERS
FIELDS (lobfn CHAR TERMINATED BY ',')
COLUMN TRANSFORMS (doc FROM lobfile (lobfn))
LOCATION ('xml.dat')
REJECT LIMIT UNLIMITED;
4. mv relay.xml /xmlfile_dir/xml.dat
When I run SELECT * FROM relayxml_xt I get this:
Error starting at line 1 in command:
select * from relayxml_xt
Error report:
SQL Error: ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: unable to open log file RELAYXML_XT_28773.log
OS error Permission denied
ORA-06512: at "SYS.ORACLE_LOADER", line 19
29913. 00000 - "error in executing %s callout"
*Cause: The execution of the specified callout caused an error.
*Action: Examine the error messages take appropriate action.
What am I doing wrong?
Thanks,
Using External Tables
Introduced in Oracle9i, Oracle’s external table feature offers a solution to define a table in the database while leaving the data stored outside of the database. Prior to Oracle Database 10g, external tables can be used only as read-only tables. In other words, if you create an external table for XML files, these files can be queries and the table can be joined with other tables. However, no DML operations, such as INSERT, UPDATE, and DELETE, are allowed on the external tables.
Note: In Oracle Database 10g , by using the ORACLE_DATAPUMP driver instead of the default ORACLE_DRIVER, you can write to external tables. In Oracle Database 10g, you can define VARCHAR2 and CLOB columns in external tables to store XML documents. The following example shows how you can create an external table with a CLOB column to store the XML documents. First, you need to create a DIRECTORY to read the data files:
CREATE DIRECTORY data_file_dir AS 'D:\xmlbook\Examples\Chapter9\src\xml';
GRANT READ, WRITE ON DIRECTORY data_file_dir TO demo;
Then, you can use this DIRECTORY to define an external table:
CREATE TABLE customer_xt (doc CLOB)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER
DEFAULT DIRECTORY data_file_dir
ACCESS PARAMETERS
FIELDS (lobfn CHAR TERMINATED BY ',')
COLUMN TRANSFORMS (doc FROM lobfile (lobfn))
LOCATION ('xml.dat')
REJECT LIMIT UNLIMITED;
The xml.dat file follows:
customer1.xml
customer2.xml
If you describe the table, you can see the following definition:
SQL> DESC customer_xt;
Name Null? Type
DOC CLOB
Then, you can query the XML document as follows:
SELECT XMLType(doc).extract('/Customer/EMAIL')
FROM customer_xt;
Though the query requires run-time XMLType creation and XPath evaluation, this approach is useful when applications just need a few queries on the XML data and don’t want to upload the XML data into database. In Oracle Database 10g, you cannot create external tables that contain pre-defined XMLType column types.
Message was edited by:
vi2167Your don't have the proper operating system privileges. Be sure that you (=oracle OS user / the OS Linux user that is starting the database) are allowed have read privs on the path and/or file.
for example...
chown -Rf /xxxxxxx/xxxx/etc
ls -l file.xml
file.xml oracle:oinstall rw-rw-rw -
I need to emulate several ActiveX functions in my client's web application. I have located several Mozilla web pages that describe how to do the things I need, and I have attempted to implement those instructions. However, I can't seem to get past the first line of code. In my web page, I am calling a JavaScript function using the onLoad attribute of the <body> tag. I am using the Navigator object to determine that the browser is Firefox. I then attempt to access the extension classes using the following code on lines 51 and 52 of the Download.js file:
var C = Components;
var CC = C.classes;
The Web Console gives me these two messages:
[13:51:55.621] The Components object is deprecated. It will soon be removed. @ http://distribution:781/NewDDI/DownLoad.js:51
[13:51:55.621] Error: Permission denied to access property 'classes' @ http://distribution:781/NewDDI/DownLoad.js:52
How do I enable adequate permission to be able to access the Components classes?I think Components is available only in extensions (or otherwise privileged code) and not in ordinary web pages.
-
Error massages: JavaScript application.Error:permission denied to property "host"
Firefox 4 on Mac 10.6.6 gives repeated error messages when opening any web page.; JavaScript application Error: Permission denied to access property "host"
follow-up: disabling/removing the add-on '''gPDF''' (v4.01) eliminates the error. I've only tested this on Ubuntu Linux & FFx 4b11...
Same issue, btw posted [http://support.mozilla.com/en-US/questions/769313] -
Why am I getting these errors Error: Permission denied for (document.domain has not been set) to call method Location.toString on (document.domain=).
== URL of affected sites ==
http://HOW DO YOU SET THIS??? I'M FRUSTRATED OVER THIS. ITS BEEN 2 MONTHS SINCE I HAVE BEEN ABLE TO PLAY ANY GAMES IN FACEBOOK DUE TO THIS PROBLEM! IT DOES NOT MATTER WHAT BROWSER I USE I STILL GET THIS SAME MESSAGE.
-
A gaming wikidot site i help with has a customized search on this page http://www.thetelonproject.com/search-the-site. It works in IE and other browsers I have, and other FF users dont have a issue, its just mine it seems.
The line that firebug references is this
>>> parent.parent.$j('iframe.html-block-iframe[src$="/' + id + '"]').height(height + 'px');<<<
error; Permission denied to access property '$j'
I dont know if this blocked from an addon or a java setting, the site admin doesn want to change the page cuz it works in his FF. I can paste more code if needed.That is an iframe with a src that links to PayPal (Donate):
*/nav:side/html/11507054cca0c8ca485ea28049465ac4f038d001-491762192042853969
http://thetelonproject.wdfiles.com/local--html/nav%3Aside/11507054cca0c8ca485ea28049465ac4f038d001-491762192042853969/www.thetelonproject.com/
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
DB13 error: permission denied
hi all,
We want to take backup of our Production server through DB13. but when we start backup it generate error
" 11/2/2010 1:15:13 PM Job started
11/2/2010 1:15:13 PM Step 001 started (program RSDBAJOB, variant &0000000000010, user ID BASIS)
11/2/2010 1:15:13 PM Execute logical command BRARCHIVE On host sapprd
11/2/2010 1:15:13 PM Parameters:-u / -jid LOG__20101102131513 -c force -p initPRD.sap -sd
11/2/2010 1:15:13 PM SXPG_COMMAND_EXECUTE(LONG)
11/2/2010 1:15:13 PM COMMANDNAME = BRARCHIVE
11/2/2010 1:15:13 PM OPERATINGSYSTEM = ANYOS
11/2/2010 1:15:13 PM TARGETSYSTEM = sapprd
11/2/2010 1:15:13 PM DESTINATION =
11/2/2010 1:15:13 PM BR0002I BRARCHIVE 7.00 (32)
11/2/2010 1:15:13 PM BR0006I Start of offline redo log processing: aeematvd.svd 2010-11-02 13.15.13
11/2/2010 1:15:13 PM BR0252E Function fopen() failed for '/oracle/PRD/saparch/aeematvd.svd' at location main-6
11/2/2010 1:15:13 PM BR0253E errno 13: Permission denied
11/2/2010 1:15:13 PM BR0121E Processing of log file /oracle/PRD/saparch/aeematvd.svd failed
11/2/2010 1:15:13 PM
11/2/2010 1:15:13 PM BR0007I End of offline redo log processing: aeematvd.svd 2010-11-02 13.15.13
11/2/2010 1:15:13 PM BR0280I BRARCHIVE time stamp: 2010-11-02 13.15.13
11/2/2010 1:15:13 PM BR0005I BRARCHIVE terminated with errors
11/2/2010 1:15:13 PM External program terminated with exit code 3
11/2/2010 1:15:13 PM BRARCHIVE returned error status E
11/2/2010 1:15:13 PM Job finished
SAP ECC 6.0 SR3 installed on Solaris 5.10.
we check permission on /sapmnt/SID/exe and oracle/PRD/saparch , it looking ok
prdadm> ls -l /sapmnt/PRD/exe/
total 1132342
-rwxr-xr-x 1 prdadm sapsys 4411632 Aug 1 2007 SAPCAR
-rwxrwxr-x 1 oraprd dba 4353608 Feb 7 2008 brarchive
-rwxrwxr-x 1 oraprd dba 4509144 Feb 7 2008 brbackup
-rwxrwxr-x 1 oraprd dba 5971136 Feb 7 2008 brconnect
-rwxrwxr-x 1 oraprd dba 4878776 Feb 7 2008 brrecover
-rwxrwxr-x 1 oraprd dba 1712640 Feb 7 2008 brrestore
-rwxrwxr-x 1 oraprd dba 6163760 Feb 7 2008 brspace
-rwsrwxr-x 1 oraprd dba 2155240 Feb 7 2008 brtools
prdadm> ls -l /oracle/PRD/
total 88
drwxr-xr-x 60 oraprd dba 1024 Jan 8 2010 102_64
drwxr-xr-x 2 oraprd dba 512 Jan 7 2010 mirrlogA
drwxr-xr-x 2 oraprd dba 512 Jan 7 2010 mirrlogB
drwxr-xr-x 2 oraprd dba 30208 Nov 2 12:49 oraarch
drwxr-xr-x 3 oraprd dba 512 Jan 7 2010 origlogA
drwxr-xr-x 3 oraprd dba 512 Jan 7 2010 origlogB
drwxr-xr-x 2 oraprd dba 512 Jan 7 2010 saparch
drwxr-xr-x 2 oraprd dba 512 Nov 2 13:08 sapbackup
drwxr-xr-x 2 oraprd dba 512 Jan 7 2010 sapcheck
drwxr-xr-x 15 oraprd dba 512 Jan 7 2010 sapdata1
drwxr-xr-x 12 oraprd dba 512 Jan 7 2010 sapdata2
drwxr-xr-x 12 oraprd dba 512 Jan 7 2010 sapdata3
drwxr-xr-x 11 oraprd dba 512 Jan 7 2010 sapdata4
drwxr-xr-x 2 oraprd dba 512 Jan 7 2010 sapreorg
drwxr-xr-x 4 oraprd dba 512 Jan 7 2010 saptrace
plz guide where is the problem.
Regrads
KhanIst we execute this , but generating error ,
now execute again , successfully RUN. Great backup has been started
root@sapprd # pwd
/sapmnt/PRD/exe
root@sapprd # ./saproot.sh PRD
Preparing /usr/sap/PRD/SYS/exe/run/brbackup ...
Preparing /usr/sap/PRD/SYS/exe/run/brarchive ...
Preparing /usr/sap/PRD/SYS/exe/run/brconnect ...
Preparing /usr/sap/PRD/SYS/exe/run/brtools ...
Preparing saposcol ...
Preparing icmbnd ...
done -
Error: Permission denied to get Window.setTimeout
I have created a bounded task flow which has single page and "close" as action to return to parent. I open it from another bounded taskflow as a popup. It opens and there is a button on the page named as "Close" which has action property as "close" to return to parent taskflow. Everything works fine when i run it in integrated weblogic with JDeveloper 11g. When i deploy it to standalone weblogic 10.3.3.x, it works perfect in IE but gives error in firefox (in all version) when i click "close" button on the page and popup is not closed. Error is following:
Permission denied to get Window.setTimeout
My environment is ADF 11g with latest patch set i.e. 11.1.1.3.xHi,
please file a service request with customer support if you can. This sounds like a software defect that should be filed as a bug
Frank -
Permission denied error in BSP application
i am using activax object "Microsoft.XMLHTTP" in my BSP application
and calling following url
req.open("POST","https://test.authorize.net/gateway/transact.dll",false);
but it give me the error permission denied
Thanks
Ganeshi can open this URL from browser, but when i call any URL from my javascript codes in BSP application it gives error "Permission denied" or url is forbidden. this happens with other url also. I have seen some thread on it and tried to put this url in my browser trusted site even after it shows same error.
Edited by: Ganesh Modhave on Sep 10, 2008 3:44 PM -
Permission Denied error launching content in SumTotal 7.2
I’m testing the trial version of Presenter 7 with SumTotal 7.2. I’m running into an inconsistent Permission Denied error that sometimes occurs when the lesson is launched and the lesson will not load/display. It doesn’t happen every time, even on the same computer. I may get the error message when trying to launch the Presenter lesson and then it may launch as expected on the second attempt. This has happened on three different computers and with each one it seems to happen sporadically. I believe, when it does happen, it will occur the first time a new lesson is launched, but then it may or may not happen again.
The error message appears in a pop-up labeled Internet Explorer with the following details:
Problems with this Web page might prevent it from being displayed properly or functioning properly. In the future, you can display this message by double-clicking the warning icon displayed in the status bar.
Line: 15
Char: 3
Error: Permission denied
Code: 0
The error points to the SCORM.HTM file. Here's the code its referring to:
<script type="text/vbscript" language="VBScript">
Sub SlideContent_FSCommand(ByVal command, ByVal args)
select case command
case "putHREF" location.href = args
case "putTitle" document.title = args
case else call SlideContent_DoFSCommand(command, args)
end select
end sub
</script>
I tried to comment out the vbscript, but the error occured with the next script on the page.
Currently I'm using Breeze 5.1 on SumTotal 7.2 and eveything works as expected. I checked a copy of a SCORM.HTM file created with Breeze 5 and it appears to have the same script in that spot and it's never caused a problem.
Workstation configuration:
WinXP SP2
IE6
Presenter 7 (trial version)
Flash Player 9
Thank you in advance for your help!Hi Sandeep,
looks like your CBS has no permission in the filesystem where it tries to build your DC.
The prefix "/usr/sap/trans_D30/CBS" looks a bit suspicious to me. Is it really intentional that CBS should work in some (probably publicly visible) transport directory?
Regards,
Marc -
Permission Denied Error when RWD auto playback file is published in portal
Hi All,
We are trying to Publish RWD Auto play back file link in Portal Environment. While doing so, we getting error Permission Denied" error(Java script error which comes on the status bar)
Following are the steps been followed so far for enabling this RWD file
1. We have uploaded an entire folder consisting of RWD Document say a HTML file which is of size say 15 MBwhich makes use of many other image files,GIF files, HTML files which are all present inside the folder into KM content of SAP EP Portal
2. We have created a KM document iview out of the HTML file(flash file)
Regards,
SowmyaHi,
Its not related to Work flow.Its just related to KM upload in the portal but the problem is the file will play only when the entire folder is uploaded.But after creating the KM document iview out of the link to the file,its not opeining.Its giving a blank screen with the "permission denied" error in the status bar
Regards,
Sowmya -
"Permission denied" error message on IE
Hi,
When we try to access any menu item from SRM Web access, we get an error (we have SRM 5.0). Our error message is:
Line: 202
Char: 7
Error: Permission denied
Code: 0
URL: https://server.domain:8005/.........
Does anyone have an idea about this problem?
Thanks,
Emrehi Emre,
plz check this setting on your Browser :
1. You must check Firewall Configuration in your network.
2. Recommended Browser Versions
- Microsoft Internet Explorer IE 6 SP1 or higher
- Netscape Navigator Version 7.X and higher
3. Recommended Browser Settings ( IE )
- If you are using Internet Explorer, switch off SSL3.0 to avoid Page
cannot be displayed errors:
Tools -> Internet Options --> Advanced --> Security --> Unflag Check box ,, User
SSL3.0
- Check to see if your PCs security Policy allows you to run Java Applets and Java
Script.
- Add http://hostname.srmserver.com and https://hostname.srmserver.com to the
Trusted Sitesof your browser. ( This will allow Java Scripting and ActiveX to run
correctly )
- Set the browser to Always Allow cookies from the domain
hostname.srmserver.com
- When you see this security alert when launching the LIVE AUCTION COCKPIT
select Always. This ensures that the applet will load correctly.
i hope this setting can help you
rgds
echo -
Permission Denied error on RAC Install Sun SPARC Solaris-NetApps
Our RAC Installation is failing when installing in silent mode the base install of Oracle RDBMS 10.2.0.1. During the process file emtgtctl is copied from node1 to node2. On node1 the file has the following permissions:
-rwsr-s--x (note the user group and set-id "s" is on).
Oracle user is performing the intsall and he is a member of oinstall.
We get the error:
"Permission Denied" and the install fails.
We try and do the copy manually as well and this fails also.
Any one ever run accross something like this?is oinstall the primary group for that user ?
-
%Error opening nvram:/startup-config (Permission denied)
I'm getting an odd error, permission denied trying to issue "show config" at user level. We use this throughout the environment with no issues.
IOS: System image file is "flash0:c2900-universalk9-mz.SPA.152-3.T.bin"
R1#sh run | i aaa
aaa new-model
aaa authentication login default group tacacs+ local
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization commands 1 default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated
aaa accounting commands 15 default stop-only group tacacs+
aaa session-id common
R1#sh run | i priv
privilege exec level 1 traceroute
privilege exec level 1 ping
privilege exec level 1 show logging
privilege exec level 1 show configuration
privilege exec level 1 show privilege
privilege exec level 1 show
R1#disable
R1>show config
Using 11855 out of 262136 bytes
%Error opening nvram:/startup-config (Permission denied)You are indeed allowed to run the command (as evidenced by the fact that the command did run).
show config is effectively an alias for the command more nvram:startup-config
As a result, the issue is the permission on the file, not the command itself.
Unfortunately, the file systems do not explicitly support permissions. This used to be implicitly supported through permissions on show config.
Perhaps this is a bug. I'd open a case on this if you need really need this feature. -
Simple-replica error: access denied
Hi,
I am trying to configure a simple replication agreement and I can not make it work. I have followed the Administrator Guide steps:
A.In the consumer:
1. Configure the DN for the supplier (cn=Replication Manager,cn=config)
2. Create the object for that user
3. Configure the replica as consumer (with the same supplied DN than before)
B. In the master:
1.Configure the change log.
2.Configure the replica as simple-master. I assigned to it the ID 1.
C. I created the replication agreement in the supplier server.
The results for all this process are:
1. Error in supplier: "replication error acquiring replica: permission denied. Error Code: 3"
2. In the consumer error log: "[12/Dec/2001:17:04:58 -0400] NSMMReplicationPlugin - Incoming replication session was unable to acq
uire replica o=idsk.com: sending error - permission denied to supplier"
3. In the consumer access log:
[12/Dec/2001:17:04:58 -0400] conn=18 op=0 BIND dn="cn=Replication Manager,cn=config" method=128 ver
sion=3
[12/Dec/2001:17:04:58 -0400] conn=18 op=0 RESULT err=0 tag=97 nentries=0 etime=0 dn=""
[12/Dec/2001:17:04:58 -0400] conn=18 op=1 SRCH base="" scope=0 filter="(objectClass=*)" attrs="supp
ortedControl supportedExtension"
[12/Dec/2001:17:04:58 -0400] conn=18 op=1 RESULT err=0 tag=101 nentries=1 etime=0
[12/Dec/2001:17:04:58 -0400] conn=18 op=2 EXT oid="2.16.840.1.113730.3.5.3"
[12/Dec/2001:17:04:58 -0400] conn=18 op=2 RESULT err=0 tag=120 nentries=0 etime=0
[12/Dec/2001:17:05:59 -0400] conn=18 op=3 UNBIND
[12/Dec/2001:17:05:59 -0400] conn=18 op=3 fd=49 closed - U1
It seems like the user is binding properly and looking for something that is not well configured in the consumer.
I am sure I am missing something because to configure the agreement should be very easy. Does anybody know what I am doing wrong?
Thank you in advance
Jorge Ortiz ClaverThe supplier is not finding the cn=Replication Manager,cn=config entry in
the consumer server. If it was, the second line in the consumer's access log
would look like:
[12/Dec/2001:17:04:58 -0400] conn=18 op=0 RESULT err=0 tag=97 nentries=0
etime=0 dn="cn=replication manager,cn=config"
Since it can't find the entry in the consumer server, your supplier is
binding anonymously, which obviously doesn't give it the permissions it
needs to update the consumer.
Are you sure you created the Replication Manager entry on the consumer? Can
you describe the configuration steps you tried, in more detail?
"Jorge Ortiz" <[email protected]> wrote in message
news:[email protected]...
Hi,
I am trying to configure a simple replication agreement and I can not
make it work. I have followed the Administrator Guide steps:
A.In the consumer:
1. Configure the DN for the supplier (cn=Replication
Manager,cn=config)
2. Create the object for that user
3. Configure the replica as consumer (with the same supplied DN than
before)
B. In the master:
1.Configure the change log.
2.Configure the replica as simple-master. I assigned to it the ID 1.
C. I created the replication agreement in the supplier server.
The results for all this process are:
1. Error in supplier: "replication error acquiring replica: permission
denied. Error Code: 3"
2. In the consumer error log: "[12/Dec/2001:17:04:58 -0400]
NSMMReplicationPlugin - Incoming replication session was unable to acq
uire replica o=idsk.com: sending error - permission denied to
supplier"
3. In the consumer access log:
[12/Dec/2001:17:04:58 -0400] conn=18 op=0 BIND dn="cn=Replication
Manager,cn=config" method=128 ver
sion=3
[12/Dec/2001:17:04:58 -0400] conn=18 op=0 RESULT err=0 tag=97
nentries=0 etime=0 dn=""
[12/Dec/2001:17:04:58 -0400] conn=18 op=1 SRCH base="" scope=0
filter="(objectClass=*)" attrs="supp
ortedControl supportedExtension"
[12/Dec/2001:17:04:58 -0400] conn=18 op=1 RESULT err=0 tag=101
nentries=1 etime=0
[12/Dec/2001:17:04:58 -0400] conn=18 op=2 EXT
oid="2.16.840.1.113730.3.5.3"
[12/Dec/2001:17:04:58 -0400] conn=18 op=2 RESULT err=0 tag=120
nentries=0 etime=0
[12/Dec/2001:17:05:59 -0400] conn=18 op=3 UNBIND
[12/Dec/2001:17:05:59 -0400] conn=18 op=3 fd=49 closed - U1
It seems like the user is binding properly and looking for something
that is not well configured in the consumer.
I am sure I am missing something because to configure the agreement
should be very easy. Does anybody know what I am doing wrong?
Thank you in advance
Jorge Ortiz Claver
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!
Maybe you are looking for
-
Our indd documents contain several product names that we have to write in a certain way. The product name must be in all caps, and we must have a descriptior after it. I've been going through the documents manually and formatting all of these, but th
-
Using Firefox 20.x , configured to always be in private browsing mode. For some reason, after a while of browsing, when I open a new empty tab, there is content saved on the dashboard of recently visited sites. This seems almost exclusively to happen
-
Query on Oracle Database migration verifier
Hi, I would like to know whether the migration verifier can be used to verify the data migration done between two different Oracle database, where the schema structures of both the databases are totally different. Thanks, Vijaya.
-
Cannot back up iphone error message " session could not be started with iphone
I cannot back up my iphone. Keep getting an error message "a session could not be started with the iphone" Need help.
-
Iphone 5 refurbished, will I be forced to update IOS?
My iPhone 5 has IOS 6.1.2 installed on it and the power button has stopped working. It is being replaced under warranty. When I set the replacement phone up from the restore from my original phone will I be able to install the same IOS (6.1.2) or wil