XL Reporter Installations problems

Hi,
I have problems installing in SBO (2005 SP01 PL 10), XL Reporter version 11. I have checked my operating system and as well the minimum requirements such as the .Net version which is 2.0 and the MDAC version which is 2.8 on a Windows XP Professional. The error, doesn't allow me to install XL reporter due to no connection to SQL, for which I have checked as well notes on the SDN checking the Connectionmanager.exe, and all I could see, but nothing seems to work.
Hope anyone can shed some light on this matter for me,
Regards
Vivek

Hi,
i'm not sure the trubble will be gone as of version 2007, but, nevertheless,
i remember once i had the same problem during the installation of the XLR.
I alway got the same problem that it wasn't possible for the XLR to get connected to the database. The solution was as simple as buggy:
When the setup shows up the sql server name, change the name to something surely not exists as an sql server in you environment. than, the connection will fail and the setup enables you to enter the sql-server name and authoriozation facts again.
hope this helps
Dominic

Similar Messages

Crystal report installation problem in windows azure.

Hi Everyone,
Good day!.
I have purchased standard version of web site in windows azure server,i'm converting existing normal asp.net application into widows azure project as web role project.In my existing project they have used crystal report tool to generate the reports.
The issue has been arrived when i published the project into azure server.When i did some R&D people have suggested some tool to install the tool name called "CRRuntime.MSI".We tried and install this msi file both 64 bit and 32 bit,but the
problem we couldn't even know whether the .MSI file got installed or not.
Still we are having same issues in server.Please give your good ideas to short this issue in server.
I'm using VS 2012
Thanks in advance !
Regards,
Ranjithkumar.

Hi,
Please make sure that you are enabling remote connection to the web role while deploying from visual studio 2012. Then get remote connectivity RDP file for the VM and connect to it. Install your tool manually and check if the problem getting resolved. If
this manual installation works then you can schedule installation as start up task in Azure web role.
[Although I don't know if your tool can be installed automatically by .cmd or .bat or powershell script file]
You can add installations as start up task in Azure Web Role service definition file. Here is the link and sample XML tags-
http://msdn.microsoft.com/en-us/library/gg456327.aspx
<ServiceDefinition name="MyService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition">
<WebRole name="WebRole1">
<Startup>
<Task commandLine="Startup.cmd" executionContext="limited" taskType="simple">
</Task>
</Startup>
</WebRole>
</ServiceDefinition>
Mark As Answer if it helps you |
My Blog

XL reporter Installation problem

Hi all
I am facing a peculiar problem....
When i am trying to install XL Reporter Addon, the following error message pop ups..
<b>Add0n XL Reporter:Addon %s - Uninstall failed</b>
thnks in advance,
MariKannan.

hi,
installation steps of XL-reporter add-on,
1. goto add-on administration => Register Add-on(click).
give the XL reporter address. select default group as Manual.
update.
2. goto addon manager => pending Add-on tab => select the addon row and install.
in installation give the user id and pwd of SQL server.
3.goto addon manager =>installed addons tab, start the XL reporter, once it get connected as status.
4. go to tools menu in SAP B1, in that you will find XL reporter, click that XL reporter will open.(to view XL reporter)
follow the above steps you will get the XL repoter add-on running in SAP B1.
sandip

CRVS2010 Beta - Crystal Report Installation problem

Hello,
I have visual studio 2010 professionnal edition (Version 2010 10.0.30319.1RTMrel). (French edition)
I would like to install and use Crystal Report, so:
- I dowloaded the Crystal report setup (cr4vs2010.exe).
- After installing the setup, I want to create my first report in my asp application (Add\New item\Reporting\Crystal report) and each time I do that I am prompted for downloading the crystal report suite.
Help appreciated, thanks.
Edited by: Don Williams on Aug 16, 2010 9:50 AM

Hello Stef,
I updated the subject line to indicate you are using Beta.
Currently it's only supported on English builds of VS 2010.
Read the link at the beginnign of this forum for more info.
Thank you
Don

Creating FRCommon system failed - in 11g Forms & Report Installation

Dear all,
When installing 11g Forms and Reports "*Creating FRCommon system failed - in 11g Forms & Report Installation*".
I have successfully created the weblogic server 10.3.5 , and continued with 11g forms & reports. First Installed the forms & reports software, and i try to configure. after several steps of configuration i have failed when its place "*Creating FRCommon system failed - in 11g Forms & Report Installation*".
What it is this Error.
Kindly help me.
My OS Windows
Forms and reports 11gR2
More info
When i start the configuration i have chosen Forms & Reports server and Development tools in the configuration page along with OHS.
Regards
Hamid

Hi experts,
I have the same problem when I try to install oracle Fusion Middleware 11g, is it possible that I forget some steps before, or should I install required something before continue intallation?
Best Regards.
Karim.

EPM 11.1.2.1 Installation problem on Laptop (Windows Server 2008 R2 x64)

Dear All,
I hope someone can help me here with EPM 11.1.2.1 installation problem on my notebook - Windows Server 2008 R2 x65, 8 GB RAM, running SQLServer 2008 Express.
I installed Hyperion Foundation. The installation and configuration went through successfully.
I am facing two problems:
Problem 1
When I try to access the workspace through the URL http://hostname:19000/workspace/index.jsp, I get error:
Quote
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
End-quote
Problem 2
Also, the service "Hyperion EPM Server" service not able to start. When I try to start, I get error message:
Quote
The Hyperion EPMA Server service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
End-quote
I tried checking everything but can't seem to figure out what's going wrong.
I have uploaded (1) EPM Config Manager screenshot (2) EPM System diagnostic report (3) EPM Registry editor output and (4) system services listing at
http://www.mediafire.com/?pr9l1v99w4d9u4r,c3vggxeibqkxbo2,lyzclu2aggbn8qh,8kur9gxal5b361z
It would be very grateful if someone can have a look and help me.
Many thanks in advance for any help / pointers / suggestions.
- Neil

Hi Pablo,
Thanks to your suggestion for database, problem #2 seem to be resolved. I am now able to start EPMA Service.
Re: Problem 1
a) Log for C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services\HyS9FoundationServices-sysout is as below
-----<start>--------
<Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 15, 2012 4:04:47 AM > <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Feb 15, 2012 4:04:48 AM > <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:
------<end>-----
I am intrigued by the last line "Enter username to boot WebLogic server:" - is there anything wrong going here?
Log for C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0 is as below:
-----<start>--------
####<Feb 15, 2012 12:49:49 AM <Info> <WebLogicServer> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589459> <BEA-000000> <WebLogic Server "FoundationServices0" version:
WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<Feb 15, 2012 12:49:49 AM <Notice> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589568> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log is opened. All server side log events will be written to this file.>
####<Feb 15, 2012 12:49:49 AM <Info> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589584> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Feb 15, 2012 12:49:49 AM <Info> <Diagnostics> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324589631> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3s" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "http" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "https" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiop" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiops" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldap" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "cluster" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "clusters" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "snmp" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "admin" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
Listen Address          :28080
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
Listen Address          :28443 (SSL)
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594982> <BEA-002609> <Channel Service initialized.>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595013> <BEA-000406> <NTSocketMuxer was built on Jan 24 2006 20:40:35
>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000436> <Allocating 4 reader threads.>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000446> <Native IO Enabled.>
####<Feb 15, 2012 12:49:55 AM <Info> <IIOP> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595216> <BEA-002014> <IIOP subsystem enabled.>
####<Feb 15, 2012 12:49:59 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324599818> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600286> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600442> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_9V5rIdcvntKDauQNwFIW41HchnU=>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600722> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLAuthorizermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600738> <BEA-090074> <Initializing Authorizer provider using LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601050> <BEA-090075> <The Authorizer provider has had its LDIF information loaded from: C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\DefaultCredentialMappermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-090827> <LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DefaultCredentialMapperInit.ldift was empty. The WebLogic provider CredentialMapper has been bootstrapped but has not been initialized with any LDIF data.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLRoleMappermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-090074> <Initializing RoleMapper provider using LDIF template file C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601346> <BEA-090075> <The RoleMapper provider has had its LDIF information loaded from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server FoundationServices0 for security realm myrealm.>
####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090082> <Security initializing using security realm myrealm.>
####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601658> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties>
------<end>-----

ITunes 11.1.4 installation problem

Along with a lot of other users I had problems yesterday with the installation of update 11.1.4 on my windows7 64bit computer. After a lot of frustration getting nowhere I resorted to 'phoning Apple Support. Despite all the postings on discussion groups the guy there told me I was the first to report the problem and he had no knowledge of it. and they would 'phone me back this morning at 09.45 gmt today.
Following yesterday's call I decided to do a system restore to iTunes 11.1.3. iTunes didn't work immediately but only after an iTunes repair in the uninstall software screen.
The call came from Apple this morning and even now the Apple girl told me that she had no knowledge and she did not have aproblem with 11.1.4. I find this totally amazing and I think they need to get their act together. Why did they not pull the update when there were so many problems? Perhaps they don't read information posted in discussion groups.
The Apple assistant seemed surprised when I told her I would be sticking with11.1.3!!

It is a big company. I'm not entirely surprised if it takes time for information about a new and evolving situation to be understood and updated advice to be delievered to front-line support.
For anyone who has had trouble installing iTunes 11.1.4.62 and wants to get iTunes functional again, read on...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8. Some users may need to follow all the steps in the appropriate support document which includes some additional manual file and folder deletions not mentioned above.
tt2

Installation problems in MSCS ORACLE 10.2 ECC 6.00

I am writing to report some unexpected installation problems. I am installing SAP ECC 6.00 in a MSCS cluster environment (Windows 2003 / Oracle 10.2) in our production environment and I am having problems during the installing the central instance phase. The sapinst_dev shows the following error: CJS-30102 Checking the database for installation type failed, Also the jsourcecheck.log shows the following error: com. sap. engine. frame. core. configuration. Configuration Exception: Error while connecting to DB and java. sql. SQLException: Excepción de E/S: The Network Adapter could not establish the connection     at oracle. jdbc.driver. DatabaseError. throwSqlException (DatabaseError.java:112)
The database is currently running without any problem and all the services (SAP and Oracle) as well.
Following the installation guide, I performed the almost all the steps successfully:
     Oracle RDBMS, patches and Oracle fail safe software on both nodes (successfully)
     Install the central services instance for ABAP (ASCS) on the first MSCS node (successfully)
     Install the central services instance (SCS) on the first MSCS node (successfully)
     Cluster the first MSCS node (successfully)
     Install the database instance on the first MSCS node (successfully)
     Cluster the additional MSCS node (successfully)
     Install an enqueue replication server(successfully)
     Perform additional steps for the Oracle Fail Safe configuration (successfully)
     Create the Oracle Fail Safe group (successfully)
     Set up as shared database directory in your Oracle Home (successfully)
     Add the Oracle database resource to the Fail Safe group (successfully)
     install the central instance (Failed)
     install at least one dialog instance (not installed yet)
As you can observe, I have performed the create oracle fail safe group activity first and then the install the central instance later. Reading the sap note 967121 today, I just realized that there is a wrong installation sequence; the sap note 967121 (actualized date: 17/OCT/07 ) says that you must install the central instance before you create the Oracle Fail Safe group. Is this sequence compulsory? Or can I continue the installation process?
If this sequence is compulsory do I have to reinstall all the predecessor activities or should I undo just the create oracle fail safe group activity?
Please let me know if the error which is showed in the installation of the central instance phase is because the wrong sequence or it is due to another reason.
Our cluster configuration is:
4 network card
Public network cards:
Ip:192.168.2.240 (hostname: ccaribe3rp1, Node A)
Ip: 192.168.2.241 (hostname: ccariber3p2, node B)
Private network cards:
Ip: 10.10.10.1 (hostname: ccaribe3rp1.ceramicascaribe.com, node A
Ip: 10.10.10.2 (hostname: ccaribe3rp2.ceramicascaribe.com, node B
Clustergroup:
Cluster group name: SAPPRO
Cluster group Virtual IP: 192.168.2.239, network name: SAPPRO (subnet mask 255.255.255.0)
SAP cluster group:
Sap clustergroup virtual IP: 192.168.2.238, network name: sapgrp (subnet mask 255.255.255.0)
Database cluster group:
Database cluster group virtual Ip: 192.168.2.237, network name: dbgrp (subnet mask: 255.255.255.0)
We have performed the mapping of the host names to the IP addresses on the windows host file already.
I would be very grateful if someone kindly can help me to solve this problem.
Best Regards
Boris Romero

Hello Boris,
one of the main problems is that step
"Create the Oracle Fail Safe group (successfully)"
cannot be successful because you need to run configtool and change the secure store as described in installation guide. At this stage the configtool does not exists (documentation error for ECC6.0 guide), so the correct sequence is to install CI and cluster the DB, but not vice versa.
Which stage is the sapinst braking up?
Is this beginning, middle or end of installation?
Did you try to run configtool and modify secure store?
best regards

SQL Developer Installation Problems

Hi,
We are trying to find a workable alternative to TOAD and have tried to install SQL Developer with not much success.... I think I am just about to give up but hope this last attempt to post for help can create a miracle.
I would appreciate very much if any one knows of a comprehensive document out there that can help trouble shoot the installation problems.
Let me give you the hardware and software versions first and then the problems.
1) SQL Developer tried: sqldeveloper-1.2.1.3213-no-jre and sqldeveloper-1.2.1.3213
2) JRE tried: JRE 1.5 and JRE 6 (C:\Program Files\Java\jre1.6.0_03)
3) Window: XP Professional version 2002 Service pack 2
4) Hardware: Intel Pentium 4 CPU 2.80 GHz, 1.98 GB of RAM
Problems:
1) SQL Developer could not find native JDBC. I don't understand why, despite all the variables set in Oracleclient10g_basic in the registry, SQL Developer did not seem to be able to find a 10g client on a network drive. I have to install 10g client directly onto my pc (C:\oracle\product\10.2.0\client_1) to solve this problem.
2) SQL Developer abruptly disappeared after database login.
I was able to connect and log into an Oralce 10g database with TNS Connect Identifier approach. There were objects (tables, views, etc) showed up briefly on the left hand side of the SQL Developer and then it just completely disappeared without even an error message or a tearful good-bye.
The only thing I can find is this error log about EXCEPTION_ACCESS_VIOLATION. After hours searching through OTN for possible mentioning of this error with SQL Developer, I found nothing so far.
Why is it so difficult to install SQL Developer? Are there a set of un-spoken pre-requisites that has to be satisfied before it can be installed properly? If so, what are they? Path system variable? Registry? Anything else?
Here's the complete EXCEPTION_ACCESS_VIOLATION error log:
# An unexpected error has been detected by Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x2ca5683c, pid=952, tid=2576
# Java VM: Java HotSpot(TM) Client VM (1.6.0_03-b05 mixed mode, sharing)
# Problematic frame:
# C [OraOCIEI10.dll+0x4f683c]
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
--------------- T H R E A D ---------------
Current thread (0x04330400): JavaThread "Init Insight" [_thread_in_native, id=2576]
siginfo: ExceptionCode=0xc0000005, reading address 0x00000000
Registers:
EAX=0x31a28e40, EBX=0x00000000, ECX=0x03231622, EDX=0x00000000
ESP=0x04b0f168, EBP=0x04b0f1a8, ESI=0x00000001, EDI=0x0413ded4
EIP=0x2ca5683c, EFLAGS=0x00010297
Top of Stack: (sp=0x04b0f168)
0x04b0f168: 00000001 00a3fb8e 0000000a 00000001
0x04b0f178: 0413c78c 00000001 02c52aa8 0000000a
0x04b0f188: 00000020 00a4047e 090ea038 0413def4
0x04b0f198: 03231622 6d8a87b3 032325c1 0413c78c
0x04b0f1a8: 04b0f1d8 2ca57072 0413ded4 032325c1
0x04b0f1b8: 00000001 00000000 03231620 03231622
0x04b0f1c8: 00000000 00000000 00000000 00000000
0x04b0f1d8: 04b0f234 2ca56e06 0413c78c 0413ded4
Instructions: (pc=0x2ca5683c)
0x2ca5682c: 5c 00 a1 80 58 b3 31 88 9f c4 00 00 00 8b 14 98
0x2ca5683c: 8b 0a 81 e1 00 80 00 00 89 4d dc 0f 85 90 03 00
Stack: [0x04ac0000,0x04b10000), sp=0x04b0f168, free space=316k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [OraOCIEI10.dll+0x4f683c]
C [OraOCIEI10.dll+0x4f7072]
C [OraOCIEI10.dll+0x4f6e06]
C [OraOCIEI10.dll+0x419685]
C [OCI.dll+0x7333]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j oracle.jdbc.driver.T2CStatement.t2cParseExecuteDescribe(Loracle/jdbc/driver/OracleStatement;JIIIZZZZ[BIBII[SI[B[CII[SII[B[CII[I[S[BIIIIZZ[Loracle/jdbc/driver/Accessor;[[[B[J[BI[CI[SIZ)I+0
j oracle.jdbc.driver.T2CCallableStatement.executeForDescribe()V+271
j oracle.jdbc.driver.T2CCallableStatement.executeForRows(Z)V+41
j oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout()V+275
j oracle.jdbc.driver.OraclePreparedStatement.executeInternal()I+94
j oracle.jdbc.driver.OraclePreparedStatement.execute()Z+17
j oracle.jdbc.driver.OracleCallableStatement.execute()Z+60
j oracle.dbtools.raptor.insight.CompletionInsight.getInsightableOracleDatabase(Loracle/javatools/db/Database;)Loracle/dbtools/raptor/insight/InsightableDatabase;+70
j oracle.dbtools.raptor.insight.CompletionInsight.<init>(Loracle/ide/Context;Loracle/javatools/db/Database;)V+161
j oracle.dbtools.sqlworksheet.sqlview.SqlEditorMainPanel$5.run()V+52
j java.lang.Thread.run()V+11
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
=>0x04330400 JavaThread "Init Insight" [_thread_in_native, id=2576]
0x0416ac00 JavaThread "Timer-4" [_thread_blocked, id=1460]
0x0412cc00 JavaThread "Timer-3" [_thread_blocked, id=2544]
0x04323800 JavaThread "WeakDataReference polling" [_thread_blocked, id=3756]
0x0315cc00 JavaThread "Image Fetcher 3" daemon [_thread_blocked, id=3412]
0x02c17c00 JavaThread "Image Fetcher 2" daemon [_thread_blocked, id=2124]
0x04324800 JavaThread "Image Fetcher 1" daemon [_thread_blocked, id=2088]
0x04321800 JavaThread "Image Fetcher 0" daemon [_thread_blocked, id=276]
0x02ca2c00 JavaThread "WaitCursorTimer" daemon [_thread_blocked, id=2096]
0x00296800 JavaThread "DestroyJavaVM" [_thread_blocked, id=3816]
0x02cb0400 JavaThread "Timer-1" [_thread_blocked, id=2832]
0x02c32000 JavaThread "IconOverlayTracker Timer" [_thread_blocked, id=1204]
0x04060800 JavaThread "Log Page Updater" [_thread_blocked, id=2160]
0x03323800 JavaThread "TimerQueue" daemon [_thread_blocked, id=3996]
0x032d1800 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=4004]
0x032ca400 JavaThread "AWT-Windows" daemon [_thread_in_native, id=1488]
0x032c9800 JavaThread "AWT-Shutdown" [_thread_blocked, id=256]
0x032c8400 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=1064]
0x02c0d000 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2956]
0x02c08400 JavaThread "CompilerThread0" daemon [_thread_blocked, id=3236]
0x02c07400 JavaThread "Attach Listener" daemon [_thread_blocked, id=3248]
0x02c06800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3232]
0x02bfe400 JavaThread "Finalizer" daemon [_thread_blocked, id=2328]
0x02bfd400 JavaThread "Reference Handler" daemon [_thread_blocked, id=1668]
Other Threads:
0x02bfc000 VMThread [id=2868]
0x02c0e800 WatcherThread [id=2940]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 1536K, used 500K [0x06960000, 0x06b00000, 0x090c0000)
eden space 1408K, 26% used [0x06960000, 0x069bd3b0, 0x06ac0000)
from space 128K, 100% used [0x06ac0000, 0x06ae0000, 0x06ae0000)
to space 128K, 0% used [0x06ae0000, 0x06ae0000, 0x06b00000)
tenured generation total 19372K, used 12857K [0x090c0000, 0x0a3ab000, 0x26960000)
the space 19372K, 66% used [0x090c0000, 0x09d4e400, 0x09d4e400, 0x0a3ab000)
compacting perm gen total 22272K, used 22205K [0x26960000, 0x27f20000, 0x2a960000)
the space 22272K, 99% used [0x26960000, 0x27f0f780, 0x27f0f800, 0x27f20000)
ro space 8192K, 62% used [0x2a960000, 0x2ae614a8, 0x2ae61600, 0x2b160000)
rw space 12288K, 52% used [0x2b160000, 0x2b7a7278, 0x2b7a7400, 0x2bd60000)
Dynamic libraries:
0x00400000 - 0x00423000      C:\WINDOWS\system32\java.exe
0x7c900000 - 0x7c9b0000      C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f5000      C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f02000      C:\WINDOWS\system32\RPCRT4.dll
0x77fe0000 - 0x77ff1000      C:\WINDOWS\system32\Secur32.dll
0x7c340000 - 0x7c396000      C:\Program Files\Java\jre1.6.0_03\bin\msvcr71.dll
0x6d7c0000 - 0x6da0a000      C:\Program Files\Java\jre1.6.0_03\bin\client\jvm.dll
0x7e410000 - 0x7e4a0000      C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f57000      C:\WINDOWS\system32\GDI32.dll
0x76b40000 - 0x76b6d000      C:\WINDOWS\system32\WINMM.dll
0x6d310000 - 0x6d318000      C:\Program Files\Java\jre1.6.0_03\bin\hpi.dll
0x76bf0000 - 0x76bfb000      C:\WINDOWS\system32\PSAPI.DLL
0x6d770000 - 0x6d77c000      C:\Program Files\Java\jre1.6.0_03\bin\verify.dll
0x6d3b0000 - 0x6d3cf000      C:\Program Files\Java\jre1.6.0_03\bin\java.dll
0x6d7b0000 - 0x6d7bf000      C:\Program Files\Java\jre1.6.0_03\bin\zip.dll
0x6d000000 - 0x6d1c3000      C:\Program Files\Java\jre1.6.0_03\bin\awt.dll
0x73000000 - 0x73026000      C:\WINDOWS\system32\WINSPOOL.DRV
0x77c10000 - 0x77c68000      C:\WINDOWS\system32\msvcrt.dll
0x76390000 - 0x763ad000      C:\WINDOWS\system32\IMM32.dll
0x774e0000 - 0x7761d000      C:\WINDOWS\system32\ole32.dll
0x5ad70000 - 0x5ada8000      C:\WINDOWS\system32\uxtheme.dll
0x73760000 - 0x737a9000      C:\WINDOWS\system32\ddraw.dll
0x73bc0000 - 0x73bc6000      C:\WINDOWS\system32\DCIMAN32.dll
0x6d2b0000 - 0x6d303000      C:\Program Files\Java\jre1.6.0_03\bin\fontmanager.dll
0x74720000 - 0x7476b000      C:\WINDOWS\system32\MSCTF.dll
0x7c9c0000 - 0x7d1d7000      C:\WINDOWS\system32\shell32.dll
0x77f60000 - 0x77fd6000      C:\WINDOWS\system32\SHLWAPI.dll
0x773d0000 - 0x774d3000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2982_x-ww_ac3f9c03\comctl32.dll
0x5d090000 - 0x5d12a000      C:\WINDOWS\system32\comctl32.dll
0x77b40000 - 0x77b62000      C:\WINDOWS\system32\Apphelp.dll
0x77c00000 - 0x77c08000      C:\WINDOWS\system32\VERSION.dll
0x03850000 - 0x0386a000      C:\sqldeveloper-1.2.1.3213-no-jre\sqldeveloper\ide\lib\idenative.dll
0x77120000 - 0x771ab000      C:\WINDOWS\system32\OLEAUT32.dll
0x6d570000 - 0x6d583000      C:\Program Files\Java\jre1.6.0_03\bin\net.dll
0x71ab0000 - 0x71ac7000      C:\WINDOWS\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000      C:\WINDOWS\system32\WS2HELP.dll
0x6d590000 - 0x6d599000      C:\Program Files\Java\jre1.6.0_03\bin\nio.dll
0x605d0000 - 0x605d9000      C:\WINDOWS\system32\mslbui.dll
0x6d220000 - 0x6d243000      C:\Program Files\Java\jre1.6.0_03\bin\dcpr.dll
0x71a50000 - 0x71a8f000      C:\WINDOWS\System32\mswsock.dll
0x76f20000 - 0x76f47000      C:\WINDOWS\system32\DNSAPI.dll
0x76fb0000 - 0x76fb8000      C:\WINDOWS\System32\winrnr.dll
0x76f60000 - 0x76f8c000      C:\WINDOWS\system32\WLDAP32.dll
0x66210000 - 0x66219000      C:\WINDOWS\system32\netware\NWWS2NDS.DLL
0x50d50000 - 0x50d98000      C:\WINDOWS\system32\NETWIN32.DLL
0x50d00000 - 0x50d15000      C:\WINDOWS\system32\CLNWIN32.DLL
0x50df0000 - 0x50e10000      C:\WINDOWS\system32\LOCWIN32.DLL
0x50db0000 - 0x50ddc000      C:\WINDOWS\system32\NCPWIN32.dll
0x71ad0000 - 0x71ad9000      C:\WINDOWS\system32\WSOCK32.dll
0x66220000 - 0x6622c000      C:\WINDOWS\system32\netware\NWWS2SLP.DLL
0x66250000 - 0x66257000      C:\WINDOWS\system32\NWSRVLOC.dll
0x76fc0000 - 0x76fc6000      C:\WINDOWS\system32\rasadhlp.dll
0x662b0000 - 0x66308000      C:\WINDOWS\system32\hnetcfg.dll
0x71a90000 - 0x71a98000      C:\WINDOWS\System32\wshtcpip.dll
0x6d560000 - 0x6d569000      C:\Program Files\Java\jre1.6.0_03\bin\management.dll
0x62f00000 - 0x62f13000      C:\oracle\product\10.2.0\client_1\ocijdbc10.dll
0x03e50000 - 0x03ea7000      C:\oracle\product\10.2.0\client_1\OCI.dll
0x2c560000 - 0x31bf6000      C:\oracle\product\10.2.0\client_1\OraOCIEI10.dll
0x77a80000 - 0x77b14000      C:\WINDOWS\system32\CRYPT32.dll
0x77b20000 - 0x77b32000      C:\WINDOWS\system32\MSASN1.dll
VM Arguments:
jvm_args: -Xmx512M -Xverify:none -XX:JavaPriority10_To_OSPriority=10 -XX:JavaPriority9_To_OSPriority=9 -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG=true -Dsun.java2d.ddoffscreen=false -Dwindows.shell.font.languages= -Dide.conf=sqldeveloper.conf -Dide.home.dir.name=.sqldeveloper
java_command: oracle.ide.boot.Launcher
Launcher Type: SUN_STANDARD
Environment Variables:
PATH=C:\oracle\product\10.2.0\client_1;X:\oracle10g\product\10.2.0\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Intel\DMIX;C:\WINDOWS\system32\nls;C:\WINDOWS\system32\nls\ENGLISH;C:\Program Files\IDM Computer Solutions\UltraEdit-32
USERNAME=leexx255
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 2 Stepping 9, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 1 (1 cores per cpu, 1 threads per core) family 15 model 2 stepping 9, cmov, cx8, fxsr, mmx, sse, sse2
Memory: 4k page, physical 2079468k(1385300k free), swap 4021668k(3516444k free)
vm_info: Java HotSpot(TM) Client VM (1.6.0_03-b05) for windows-x86, built on Sep 24 2007 22:24:33 by "java_re" with unknown MS VC++:1310
Is this a java problem? SQL Developer problem? Or something else?
Thanks in advance,
a TOAD lover

The problem you are seeing (the EXCEPTION_ACCESS_VIOLATION) is a result of a version mismatch between the JDBC driver being used by SQL Developer and the Oracle client that is found on the path.
This issue only occurs when trying to use the OCI version of the JDBC driver. The simplest fix is to switch to using the basic connection type and thus using the thin (all Java) JDBC driver. As no Oracle client is required in this case, the version mismatch won't be an issue.
However, the connection approach you are using should work, and if you wish to try to sort out the problems there, we should be able to further diagnose the underlying cause of the version mismatch.
To do this, I would need to see what SQL Developer thinks are the potential Oracle client installs, as well as which install it ends up picking. Can you copy/paste the output in the Log Window (Logging Page) that is present after SQL Developer starts (but before you attempt to connect to any database)? There should be a whole series of entries like 'Checking for ORACLE_HOME environment variable' and 'Checking JDBC driver at <some path>'
These log entries are output by SQL Developer as it tries to sort out the various bits of information about Oracle client installs and thus give a peek at the selection logic being used.
Oh, and also - the value of your PATH variable would be useful as well. It may be that there is an Oracle client install on the PATH that supersedes the install SQL Developer is finding via the registry or ORACLE_HOME variable.
- John McGinnis
SQL Developer Team

Error in XL reporter installation

Dear Friends,
I am facing the problem in XL Reporter installation.
While I was trying to install XL reporter add on in server, I am getting error.
System error message was u201CMicrosoft XL is required but not installed erroru201D
Can anyone face this same problem in XL reporter Installation?
Kindly help me to resolve this problem.
Thanks in advance,
Regards,
Senthil Maruthappan.
Team work never fails.

Sridharan,
As your suggestion, I have tried to install SP 01 patch level 30 in my server.
XL Reporter Add u2013on Installed perfectly in my server now.
Thanks once again.
Regards,
Senthil Maruthappan.
Team work never fails.

R/3 4.6B Installation Problem

Dear all,
I have installation problem when system carry out the final step "Initializing the Workbench Organizer with RFC" after I click Continue to skip importing non-latin language.
the error message is showing below
INFO 2009-01-22 11:28:00
    Starting up the SAP System
INFO 2009-01-22 11:28:32
    Initializing the Workbench Organizer with RFC
Thu Jan 22 11:28:32 2009
RFC> SetErrorState 0 (line: 447)
RFC resize I/O buffer to 16000 bytes
RFC >>>> C11          : EXT saptester >>> OPEN.
RFC >>>> C11          : EXT saptester >>> 94913478替 .
RFC *> RfcOpen
RFC         options->destination = C11
RFC         options->mode         = RFC_MODE_R3ONLY
RFC         options->connopt.hostname        = saptester
RFC         options->connopt.sysnr           = 0
RFC         options->connopt.gateway_host    = saptester
RFC         options->connopt.gateway_service = sapgw00
RFC         options->client       = 000
RFC         options->user         = DDIC
RFC         options->password     = secret (-:
RFC         options->language     = EN
RFC         options->trace        = 3
Thu Jan 22 11:28:34 2009
RFC
>>> RfcCall...
RFC *> RfcCall
FUNCTION RFCPING
RFC         handle = 1
RFC >>>> C11          : EXT saptester >>> WRITE.
RFC >>>> C11          : EXT saptester >>> FLUSH(WRITE).
RFC <* RfcCall: returns 0:RFC_OK
RFC >>>> C11          : EXT saptester >>> FLUSH(WRITE).
RFC
>>>> Listen/WaitForRequest (counter = 3)
RFC> SetErrorState 10 (line: 724)
RFC >>>> C11          : EXT saptester >>> CLOSE.
RFC
>>> RfcReceive...
RFC> CheckErrorState 10 (line: 895)
RFC *> RfcReceive
RFC         handle = 1
RFC <* RfcReceive: returns 3:RFC_SYS_EXCEPTION
WARNING 2009-01-22 11:28:36 RFCRSWBOINI_IND_IND CRfcPing:0
    Pinging of RFC destination failed.
RFC *> RfcClose
RFC         handle = 1
Can any one tell me what happen, please.
Thanks
Regard
Alvin

No, reinstallation doesn't work, the same problem come up again!
despite this problem, the SAP system does up and runing in the MMC console. but when I logon to the system, there is always ABAP program problem come up immediately, system always report there is missing function, I can not do any further processing.
any idea?
Thanks
Alvin

PSE9 Installation problems

I've just purchased a tablet that comes with a host of programs, one of which is PSE9, which I am trying to install, with no luck. The installation almost completes but stops at "Shared Technologies" and rolls back the installation. I've tried multiple times with the same problem. I've gone though the installation problem checklist and the problem still persists. I've closed all other Adobe programs and triple checked the processes tab of the Task Manager to make sure no other Adobe programs are running. I've also tried the advice offered in this thread with no luck. I do not run any other Photoshop programs; this is my first purchase in quite some time.
I'm not very good with computers, but I am running Windows 7 64-bit with 32.2GB free.
Please help! I'm at the end of my rope.

I should have been more clear! I mean I have purchased a drawing tablet that comes with a CD to install PSE9, not a handheld tablet.
@Bill: I might have missed something when shutting off my anti-virus, so I'll try it again and report back.
Edit: Nope, it still rolls back the installion at Shared Technologies even when I've made sure my anti-virus is completely off.

CRS Installation problem - node out of sync?

Hi at all
I have some installation problems with 10gR2 Rac and CRS on RHEL 4.0 (kernel 2.6.9) and Vmware Workastion 5.0. . Also I have applied suggestion in the vmware KB available at this link
http://kb.vmware.com/vmtnkb/search.do?cmd=displayKC&docType=kc&externalId=1420&sliceId=SAL_Public
due some synchronization problems .
Also, I have configured ntpd daemon for sync my virtual machine.
The error message from installActions2006-12-18_01-10-58AM.log is:
INFO: Exclude file list /tmp/OraInstall2006-12-18_01-10-58AM/installExcludeFile.lst does not exist or is empty. The file is ignored.
WARNING: Error while copying directory /app/oracle/product/10.2.0/crs with exclude file list 'null' to nodes 'oracle002'. [PRKC-1002 : All the submitted commands did not execute successfully]
oracle002:
/bin/tar: ./bin/ocrcheck: time stamp 2006-12-18 01:15:27 is 34 s in the future
/bin/tar: ./bin/crs_register: time stamp 2006-12-18 01:15:28 is 35 s in the future
/bin/tar: ./bin/cemutls: time stamp 2006-12-18 01:15:28 is 34 s in the future
/bin/tar: ./bin/usrvip: time stamp 2006-12-18 01:15:28 is 34 s in the future
/bin/tar: ./bin/cluvfy: time stamp 2006-12-18 01:15:28 is 32 s in the future
/bin/tar: ./bin/racgons: time stamp 2006-12-18 01:15:28 is 30 s in the future
/bin/tar: ./bin/cluutil: time stamp 2006-12-18 01:15:28 is 29 s in the future
/bin/tar: ./bin/crs_profile: time stamp 2006-12-18 01:15:28 is 29 s in the future
/bin/tar: ./bin/vipca: time stamp 2006-12-18 01:15:47 is 48 s in the future
/bin/tar: ./bin/clscfg: time stamp 2006-12-18 01:15:27 is 25 s in the future
/bin/tar: ./bin/clsid: time stamp 2006-12-18 01:15:27 is 25 s in the future
/bin/tar: ./bin/crs_start: time stamp 2006-12-18 01:15:28 is 26 s in the future
/bin/tar: ./bin/crsctl: time stamp 2006-12-18 01:15:27 is 24 s in the future
/bin/tar: ./bin/evmsort: time stamp 2006-12-18 01:15:28 is 24 s in the future
/bin/tar: ./bin/evmmkbin: time stamp 2006-12-18 01:15:28 is 24 s in the future
but if I check clock sync between two nodes....:
[oracle@oracle001 ~]$ date;ssh oracle002 date;
Mon Dec 18 01:39:33 CET 2006
Mon Dec 18 01:39:33 CET 2006
and from the first node
[root@oracle001 crs]# ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
oracle002-priv 10.0.0.1 3 u 30 64 37 0.264 8.075 2003.55
and from the second node:
[root@oracle002 crs]# ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
10.0.0.1 193.204.114.232 2 u 17 64 377 0.652 -30.302 16212.0
[root@oracle002 crs]#
Please, someone can Help me?
Thanks
Adriano Capruzzi
Message was edited by:
adriano.ba

Your 4MEM error code is indeed reporting to you that some of your RAM is not working properly (MEM = memory, i.e. RAM).
The fix for this (replacing the RAM) is normally covered under warranty for a computer as new as yours is. To get the free warranty repair I believe that you do need to bring your computer to an Apple-certified repair center, however. If you order the RAM and do it yourself, you will need to pay for the RAM and also go through the trouble of opening your computer to access the RAM, which is not that hard to do for some people, others prefer to have a technician do that.
I'd suggest that you have Apple do the RAM fix, if only so that the replacement RAM is covered as well going forward ...

Xl reporter installation issues

Hello
First please accept my apologies because I know this question has been asked but I haven't found the answers I needed. .
I have got 90 % of the XL reporter installation not working. In that 90 %, I have
- half issues with a missing COM module in Excel and a user with full admin right to the computer. Usually one of the multiple users in the computer
- half issues where XL reporter cannot load due to a DLL problem (but doesn't say what problem). This is during the initial load
I have tried full reinstall of B1 + excel + cleaning the %temp% folder. How can I get that software to work ? This is the most instable piece of code I have ever seen (and I have seen some bad).
Thanks for your help
Regards
Fabrice

Hi,
try to check these notes 843566 and 853343
Rgds,

Java ME SDK 8.0 EA Netbeans plugin installation problem

We have been getting reports that some developer had trouble installing the Java ME SDK 8 EA plugins into NetBeans. We are working on fixing the issue, in the meantime please try the workaround posted in the Java ME SDK forum:
Java ME SDK 8.0 EA Netbeans plugin installation problem
Also be sure to check the latest ME SDK 8 EA Release Notes for late-braking information:
http://docs.oracle.com/javame/dev-tools/jme-sdk-8/release-notes/html/Release_Notes/Release_Notes.html
Sorry for the inconvenience.
Best,
-- Terrence

Hi,
For the Raspberry Pi, tooling over serial port is not supported. The simplest solution is to use standard IP networking over Ethernet. This can be a direct connection between the PC and the Raspberry Pi, as long as the cable is twisted and the IP addressing is correct (e.g. manual IP addressing or DHCP server on the PC).
Regarding "Connecting to a UART Device": This is meant for attaching and controlling serial devices from the Raspberry Pi, not for tooling connections between the Raspberry Pi and the PC.
Hope this helps,
-- Terrence

XL Reporter Installations problems

Similar Messages

Maybe you are looking for