XL Reporter linking(RG 23 A Part 1)

Hi all,
How we can fetch the linking of fields of RG 23 A Part1 register.
Which field is linked with Which Table in RG 23 A Part 1 register.
Thanks,
Neetu

RG23A is stored as 'RG23APart1' in the Row Level of the corresponding document.
For Example, in Outgoing Excise Invoice, it is in OEI1 table .
select RG23APart1 from OEI1

Similar Messages

How to open reports in same portlet when clicked on item report links in menu portlet

Hi,
I am not sure what forum I should ask this question. Anyway, I am trying in the content areas forum.
Let me explain what I trying to do.
I have reports links as menu item links in a menu. I have published this menu to portal and added it to a page. I can now see the report links. If I now click on the report link, it opens the report in a whole window. How do I open the report in the same portlet or if this is not possible, how do I open this in a different portlet on the same page ?
thanks for helping.
Mainak

Hi,
This is part of JPDK. You will have to install it. Which version of portal are you using? You can also try this out using
URL portlet which is available with webview in 309.
Thanks,
Sharmila

How do I submit a Report link with a URL for one of the values

Hi -- I have a Report link on a column, and I want to set an item to one of the report columns which contains URL values (like "http://...."). If I do that, the URL ends up in the hyperlink and is not escaped, so the colon confuses things. How do I get the report column to be escaped?
Thanks

You can convert the colon to whatever you like in your select statement but you cannot supply a colon as part of an item value field in an f?p URL.
Scott

How to display reports in same portlet when clicked on report links in a menu portlet

Hi,
I am not sure what forum I should ask this question. Anyway, I am trying in this forum.
Let me explain what I trying to do.
I have reports links as menu item links in a menu. I have published this menu to portal and added it to a page. I can now see the report links. If I now click on the report link, it opens the report in a whole window. How do I open the report in the same portlet? Is this possible to open the report in a different portlet at least?
Thanks for your help.

Hi,
This is part of JPDK. You will have to install it. Which version of portal are you using? You can also try this out using
URL portlet which is available with webview in 309.
Thanks,
Sharmila

Report Link + Authorization Scheme

I have an authorization scheme that checks whether a certain person has privileges to edit a record on Page 2 by referring to the :P2_ID in the authorization scheme. Page 1 has a report with a report link, but the user can see both items they are able to edit and items they are not. I know I can make the link dynamically in the sql but wanted to see if there was an easy way to use an authorization scheme, but pass the #REPORT_COL# value in the report over to an authorization scheme to show or hide the icon for me so I can get the link out of the sql.

Great example Scott! However, I'd would caution the other Sc0tt that calling functions in a SQL statement is fine for a small number of rows, but can CRUSH performance for medium to large result sets. Even if the function is fast, you're still context-switching between SQL and PL/SQL for every row. Make sure you test this with the volume of data you expect your users to encounter. If it's a problem, you might force the user to apply some filters before running the query.
If you're running 11g you can at least minimize the hit of the function with "Function Result Cache". Even if you're not on 11g yet, you can use the following code in 10g and it will switch-on result cache when you compile it in 11g:
create or replace function auth_user(p_key in number)
     return varchar2
     $IF not dbms_db_version.ver_le_10_2 $THEN
          result_cache
     $END
as
begin
    pkg.g_value := p_key;
    if apex_application.public_security_check (p_security_scheme => 'AUTH_USER_COLUMN') then
        return '1';
    else
        return '0';
    end if;
end;
/ If it is a reasonable result set, Scott's solution is perfect.
Thanks,
Tyler

Report link that will open to a new window

Hi,
I need a report link that will open to a new window. Below is my code.
{="<ahref=\"http://<server>:<port>/OpenDocument/opendoc/openDocument.jsp?sRefresh=Y&sPath
ParentFolder,subfolder&sDocname=<Report Name>=wid"\">"[ID]+"</a>"}
Thank you.
Rose

Add the parameter sWindow=new to your URL
...openDocument.jsp?sDocname=SalesReport&sWindow=new
OpenDocument Documentation:
XI 3:
http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_url_reporting_opendocument_en.pdf
R2:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/800f7400-bf3e-2b10-fa81-c6c74f457ab4

Issue with Report Links in OBIEE

I'm facing a issue with report links(modify,printer friendly,refresh etc) in obiee
The reports which are set as "Display Results-->Embedded in Section" for those reports if I put report links(modify,printer friendly,refresh etc),the links do not show up.In the palce of link I can see "-"(minus sign) appearing.
If I change the report to "Display Results--->Show as link in seperate window" the lniks show up fine.
Any idea why this is happening?
Your suggestions are welcome.
Please help
Regards.
Edited by: 810008 on Apr 14, 2011 1:39 AM

Edit Dashboard -> Report Properties -> Report Links... (directly under Display Results) -> Customize
M.

Error In ECC For Crystal Report Containing Sub-Report Link

Hi,
We are using Crystal Reports 2013. We extracted a Crystal Report from SAP ECC to modify it further utilizing the features of Crystal and export it back to SAP ECC.
The updated Crystal Report has a Sub-Report link within it, while exporting it back to SAP ECC, we get the attached error message as "layout.subreport should not contain any data connections".
However, on removing the Sub-Report link, the report can be successfully exported back to ECC and executes without any issues.
Is there any limitation on features to be used when exporting Crystal Reports to ECC?
Thanks & Regards,
Mitalee

Hi
I am facing the same issue when I try to open Crystal report Olap Grid via .net Crystal Report Viewer.
Getting the error message like not able to open OLAP Cube.
Please need urgent solution
Thanks a lot,
Usha

How to add SharePoint 2013 Promoted link list view web part in page programatically with Tiles view using CSOM.

How to add SharePoint 2013 Promoted link list view web part in page programatically with Tiles view using CSOM. I found that it can be
done by using XsltListViewWebPart class but how can I use this one by using shraepoint client api.
shiv

Nice, can you point me to the solution please ?
I'm trying to do this but I get an error :
Web Part Error: Cannot complete this action. Please try again. Correlation ID: blablabla
StackTrace: at Microsoft.SharePoint.SPViewCollection.EnsureViewSchema(Boolean fullBlownSchema, Boolean bNeedInitallViews) at Microsoft.SharePoint.SPList.GetView(Guid viewGuid)
All help really appreciated.

Calling A Page Process From Report Link

Hello.
I am using Apex 4.2.1 on Oracle 11gR3 and mod_plsql.
I am trying to run a PLSQL after-submit page process when users click a SQL generated link in a classical type report.
For example, my classical report uses the query:
SELECT
E.*,
'<a id="rid" href="f?p=&APP_ID.:31:&SESSION.:ADDROW:::P31_ENAME,P31_MGR,P31_DEPTNO:'
|| E.ENAME
|| ','
|| TO_CHAR(E.MGR)
|| ','
|| TO_CHAR(E.DEPTNO)
|| '">'
|| 'Add New Row'
|| '</a>' AS ADD_ROW
FROM
EMP E
My page also has an after submit PLSQL process defined as:
declare
v_empno     integer;
begin
select nvl(max(empno), 0) + 1
    into v_empno
    from emp;
insert into emp (empno,
                   ename,
                   mgr,
                   deptno)
           values (v_empno,
                   substr(:P31_ENAME,1,1) || '-' || to_char(v_empno),
                   to_number(:P31_MGR),
                   to_number(:P31_DEPTNO));
end;
This process has the condition "Request = Expression 1", where "Expression 1" = ADDROW.
I thought that if users click the "ADD_ROW" report link, then the report items ENAME, MGR, and DEPTNO would be passed to corresponding page items. In addition, the above PLSQL process would be executed and add a new row to the EMP table. The report then would then display the newly added row.
But when I click the report link, I see that my page items are, in fact, assigned the associated report values. But the page process is never executed.
I have looked at both the Session State page and in Debug mode. The processing simply never executes my page process.
Would anyone know why my page process is not being run? And, how can I get the page process to run when users click the report link? Indeed, what is the point of even having a REQUEST tage embedded in the url if it is not recognized bt other processes on the page?
In my apex.oracle.com workspace, I have created an example page in which all of this has been coded:
Workspace: EEG
Username: [email protected]
Password: galaxy123 (all lowercase)
AppID: 27083 (Elie_Goodies)
Page 31 (Test Url Request Option)
I would much appreciate if someone could help me with this as I am puzzled why this is not working.
Thank you very much.
Elie

Hi Elie,
I think it's fixed. It was very close. It's just a matter of timing.
For a REQUEST to be visible after submit you have to submit the page. Something like apex.submit("ADD_ROW") will do that.
Then, when the page renders the REQUEST is empty again.
Same thing with the link, which is what you implemented, the REQUEST is only present during render of the page. Then it's gone when the page is submitted.
All I had to do is move your Process to run Before Header so that it could "see" the value of the request. I didn't touch (or look) and any of the code.
Either On Load Before Header or On Load Before region processing points would have worked here.
Thanks
-Jorge
Message was edited by: jrimblas

Report Links in OBIEE 11g Dashboard not displayed correctly

In the Dashboard pages the Report Links for Export are not displayed correctly .
Instead of showing the multiple options for export/download it shows just text.

It can be done by doing below steps.
1) before doing this take a backup of instanconfig.xml file and do the below changes...
You can configure various options that change the way that right-click interactions are handled in views for an analysis at runtime. The elements in the instanceconfig.xml file specify the default settings for a new or upgraded analysis. You can edit the properties of an analysis in Presentation Services to modify how the analysis handles right-click interactions in views.
Before you begin this procedure, ensure that you are familiar with the information in Section 3.4, "Using a Text Editor to Update Configuration Settings."
To manually configure for interactions in views:
2) C:\Oracle\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfig.xml
Open the instanceconfig.xml file for editing,
3)
Locate the sections in which you must add the elements
Include the elements and their ancestor elements as appropriate, as shown in the following example:
<ServerInstance>
<Analysis>
<InteractionProperties>
<InteractionPropertyAddRemoveValues>false</InteractionPropertyAddRemoveValues>
<InteractionPropertyCalcItemOperations>false</InteractionPropertyCalcItemOperations>
<InteractionPropertyDrill>false</InteractionPropertyDrill>
<InteractionPropertyGroupOperations>false</InteractionPropertyGroupOperations>
<InteractionPropertyInclExclColumns>false</InteractionPropertyInclExclColumns>
<InteractionPropertyMoveColumns>false</InteractionPropertyMoveColumns>
<InteractionPropertyRunningSum>false</InteractionPropertyRunningSum>
<InteractionPropertyShowHideSubTotal>false</InteractionPropertyShowHideSubTotal>
<InteractionPropertySortColumns>false</InteractionPropertySortColumns>
</InteractionProperties>
</Analysis>
</ServerInstance>
4) Save your changes and close the file.
5)
Restart Oracle Business Intelligence.
Mark as correct if it is helpful :)
Thanks.

Report Links issue in obiee 11g

hi all,
we are using obiee 11.1.1.5 version. we are facing issue with report links. when there is no data in the dashboard, the dashboard is displaying only Refresh button, it is not displaying Export and Print(even though we customized the report links to display Refresh, Export, Print). when there is data in the dashboard it is displaying Refresh, Export and Print as expected. Is this product limitation or a bug in obiee.

You need to repost this in the OBI-EE forum.

Downloading a file from a report link

I have a report link that sends a couple parameters to a secondary page.
The secondary page has a process in it that selects a blob file from a table and then downloads that file.
However, there is no browser download file dialog window that pops-up when the link is clicked.
The file just displays in the browser. So, I'm thinking I have something wrong with my MIME header.
The process that downloads the file is:
<code>
DECLARE
l_length NUMBER;
l_lob_loc BLOB := EMPTY_BLOB();
l_mime_type warm_files.mime_type%TYPE;
BEGIN
apex_application.g_page_text_generated := true;
apex_application.g_unrecoverable_error := true;
select blob_content, dbms_lob.getlength(blob_content), mime_type
into l_lob_loc, l_length, l_mime_type
from WARM_FILES
where context_id = :P12_CONTEXT_ID
and file_id = :P12_FILE_ID
-- set up HTTP header
OWA_UTIL.mime_header (l_mime_type, FALSE);
-- set the size so the browser knows how much to download
HTP.p ('Content-length: ' || l_length);
-- close the headers
OWA_UTIL.http_header_close;
-- download the BLOB
wpg_docload.download_file (l_lob_loc);
END;
</code>
The :P12 variables are the parameters coming in from the link.
There are no errors. The file just displays in the browser window.
Any clues as to what I'm missing are greatly appreciated.
Thanks in advance.
alan.
Edited by: semaphore on Dec 11, 2009 9:14 AM

Hi Alan,
try this...
This is my procedure which I adapted to yours...
<code>
DECLARE
l_length NUMBER;
l_lob_loc BLOB := EMPTY_BLOB();
l_mime_type warm_files.mime_type%TYPE;
l_file_name VARCHAR2(2000);
BEGIN
apex_application.g_page_text_generated := true;
apex_application.g_unrecoverable_error := true;
SELECT null,
BLOB_CONTENT,
name,
DBMS_LOB.GETLENGTH(blob_content)
INTO l_mime_type,
l_lob_loc,
l_file_name,
l_length
from WARM_FILES
where context_id = :P12_CONTEXT_ID
and file_id = :P12_FILE_ID;
-- set up HTTP header
owa_util.mime_header( nvl(l_mime_type,'application/octet'), FALSE );
-- set the size so the browser knows how much to download
HTP.p ('Content-length: ' || l_length);
-- the filename will be used by the browser if the users does a save as
htp.p('Content-Disposition: attachment; filename="'||substr(l_file_name,instr(l_file_name,'/')+1)|| '"');
-- close the headers
OWA_UTIL.http_header_close;
-- download the BLOB
wpg_docload.download_file (l_lob_loc);
END;
</code>
Hope it helps.
Regards, Zlatko Matanic

Error on BW reports link

Currently we're experiencing an error on our BW reports link wherein our BW reports thru Internet Explorer can not be displayed. By clicking one of the reports the page can't be displayed. Currently what we are doing just to resolve the problem is to restart our BWserv using stopsap then startsap just to refresh the server. After that everything is normal again. Can you please help me isolate what causes the problem inorder to prevent this from happening again.

for the BW webreports to work
the ICMAN (internet communication manager) should be running which you can check from transaction SMICM
and sap/bw/BEX node should be active in transaction SICF
Regards
Raja

Sub report linking definition based on result, not on parameter value

Dear all,
I have created a report with CR 2008 SP6. The parameters from the referring BI query are period and customer. After the user enter parameter values, the report provides then Customer and product information.
I have add a sub report with additional information for product. I can transfer the parameter value (user input) for Customer to the sub report, but not for product, due to the fact that in the main report Product is not selected as parameter, but is a result set after the report is executed.
Is there a way to define in the Sub report linking exactly these result values of Product as new parameter for the sub report.
In the sub report linking definition I only see the possibility of defining the parameter as linking object, but not the report result set. See also the screenshot.
Any idea would be great. Best regards,
Stefanos from Munich/Germany

Hi Stefanos,
Where is the Subreport placed on the report?
Do you have a prompt in the Subreport for 'product'?
If yes, then here's open the 'Change Subreport Links' window > Move the Product field to the Pane on the right > From the drop down at the bottom left that says 'Subreport parameter field to use', choose the Product prompt.
If you don't have a prompt for product in the Subreport, then just move the Product field to the Pane on the right > From the drop down at the bottom right that says 'Select data in Subreport based on field', choose the Product field from the drop-down.
-Abhilash

XL Reporter linking(RG 23 A Part 1)

Similar Messages

Maybe you are looking for