XL Reporter not working for MS Office 2007

Hi
We have SAP B1-2005 with (PL35, XL Reporter 6.80.01), after installing XL Reporter we got the error as Microsoft Excel is required but not installed, for which we had browsed the forums and got the below said solutions
1. Uninstall XLR completely.
2. in SQL Server Studio Management, delete IX MetaDB database
3. Uninstall Office 2007
4. Install Office 2007
5. Open SAP Business One and install XL Reporter.
After doing the above said process we are still getting the same error.
Please help us to resolve.
Regards
Shanker

There is no problem running XLR with MS Office 2007.
There is only one exception: XLR does not run with MS Office 2007 in the Small Business Edition!
To handle the security problems you have: You have to allow macros in Excel, since a great part of XLR is realized as macros in Excel. And perhaps you have to set the security in Excel to a less secury level than you have.
Sorry, but currently I can't tell you the exact security settings in MS Excel 2007 I use to run XLR. Since they differ from the settings in MS Excel 2003 and the machine I have installed MS Officew 2007 is crashed.
To solve your problems maybe you should set the security to the lowest level. If XLR is running set the security stepwise to a higher level until there arise problems. This is just an idea, since I can't tell you the exact settings.
Hope it helps!
Frank

Similar Messages

Spell Check is not working in MS Office 2007

Hi All,
Spell Check option is not working in MS Office 2007 applications like Word and Outlook.
Surprisingly, when we reply to any email, spell check is working fine, but when we are typing New email, Spell Check is not working.
OS: Windows XP Service Pack 3
Gone through Google and modified Registry keys, updated MS Office 2007 hot-fixes, reinstalled MS Office 2007, but nothing worked.
Could anyone help us on this issue.
Thanks.

Step
1
Go to Office Button > Word options > Proofing
> Custome dictionary > Make
sure CUSTOM.DIC is checked.
Step
2
Click on Office Button | Word Options | Proofing
| check the
"Check spelling as you type" and "Check grammar with spelling" boxes |
uncheck the "Hide spelling errors in this document only" and "Hide
grammar errors in this document only" boxes | OK.
Step
3
Open a document that has this problem, press Ctrl+A
to select all
of the text
Click on Review tab | Proofing: Set Language |
language> | uncheck the "Detect language automatically" and "Do not
check spelling or grammar" boxes | Default | OK.
Click on Office Button | Word Options | Proofing | check the
"Check spelling as you type" and "Check grammar with spelling" boxes |
uncheck the "Hide spelling errors in this document only" and "Hide
grammar errors in this document only" boxes | OK.
Step
4
In your Windows registry, if the key
"HKEY_CURRENT_USER\Software\Microsoft\Shared Tools\Proofing
Tools\1.0\Override" exists, delete it.
http://redfireworkz.blogspot.com/2010/10/spell-check-does-not-work-in-office.html

Cfexchangeconnection tag not working for exchange server 2007

We are using Coldfusion 8 - 64 bit. Over week end, we migrated from Microsoft exchange 2003 to Exchange 2007. We are using cfexchangeconnection tag to get emails from exchange to our application. After recent update to exchange 2007 this tag is not working. we are getting following error
"Unable to connect to the Exchange server using HTTP/HTTPS protocol"
We have tried following :
1. the certificate checked and is ok and lacated in right directory.
2. We are using form based authentication
Any help on this will be highly appreciated.
Thanks
santy

If this is a migration to a new server I would check some things.
Firewall access rules allow port 80 and 443, for a network firewall, and if a new server windows firewall (think Win Server 2008 firewall is enabled by default).
For SSL connections, is the install certificate on the server match the server name you are connecting to in full? Maybe an old certificate or something got installed on the exchange server.
I haven't used this tag, but maybe you could try the username as [email protected], if you are just using "blah".
Byron Mann
[email protected]
[email protected]
Software Architect
hosting.com | hostmysite.com
http://www.hostmysite.com/?utm_source=bb

In app navigation not working for one office member

We are in the process of laucnhing 4 new magazine apps for January. One of the members of our team is having issues with one specific action. At the bottom of each content folio, we place a button that says go to top. This button links you to the first page of the folio. We used to accomplich this by using the navto:// command in the button panel. For instance, navto://articletitle_v. Then we started using the go to first page command so that everyone could continuatlly reuse the same button among brands and not have to put in navto commands for each folio anymore.
This process works for every single person on the team (5), except one. We are all using the same setup, and the same version of the toolset. Everything else this member of the team does works fine when tested, including navigation buttons from article to article. However, we just cannot get the go to top feature to work. We have tried both methods, the navto:// and the go to first page method and neither will work when we test her issues. I have also made random rectangles on this person's machine and set them up to take you to the top, just to see if there was something wrong with the graphic. Even these new graphics wont take you to the top. As a work around someone else on the team has to open the files and put the go to top buttons in and everything works fine.
Has anyone run into this and if so how did you resolve it? This is one of those things that is going to keep me awake at night i can tell.

Its working now. We just kept trying to reinstall the tools and restarting indesign. On the 4th time the buttons started working. I can't explain why it finally worked, just that it is working now.

FR reports not working for new planning application

Situation:
Hyperion 9.2.0
New planning application created and also registered to share services. One existing group have role assigned as 'Interactive User' and not able to perform operations on workspace (FR), FR Studio and Smart view. (Note: Admin can perform such activities and there is no error.)
Key user receiving mention below messages while accessing FR report from workspace and using FR studio for particular report related to only new application. The existing FR reports on different planning application working fine working fine from workspace and FR studio. Here are the errors:
*Workspace Error [Only for new application report]*
[Wed Aug 24 15:04:35 2011]Local////Error(1051440) Analytical Services user [abcd] Authentication Fails against the Shared Services Server with Error [Failed to authenticate user abcd against provider Native Directory]
*FR Studio [Only for new application report]*
Error connecting to database connection XYZ: [Wed Aug 24 15:08:50 2011]<Server Name///abcd/Error(1051025) User abcd is not permitted to access application XYZ
Smart View Error (Only for new application connection)
Cannot open cube view. OLAP Error (1051025): User abcd is not permitted to access application XYZ.
Analysis
While looking Essbase, I identified that under security (User/Groups), group that have access as interactive user is not listed. Only I can see the groups that have admin roles. However I can see all other planning application successfully displayed groups associated to particular question.
Please help to resolve the issue. I am new to this concept, so the detailed level description will help me lot
Thanks
Edited by: user10070515 on Aug 25, 2011 4:25 AM

Hi
Thanks For the replies.
After the data is copied into the layout. User is changing the values of few key figures and saving. A new line item is created in the cube with the new values.
Ex
Cust ....qty.....Value....Revenue
c100....10........100.....1000
Changing the value in layout
Cust ....qty.....Value....Revenue
c100....10........150.....1000
After saving in the cube
Cust ....qty.....Value....Revenue
c100....10........100.....1000
c100....0........50..........0
When the user execute the report revenue is not populating correctly. And i was expecing 150 *10 = 1500. I understood the issue. Can anyone tell me how can i achieve without updating the quantity how can i get this?
Thanks
Annie

Drill Through report not working for large data

Hi,
In SSRS 2008 R2, I have a main report and a drill through report from one of the main report's column. The drill through report works mostly except if the data is too large i.e. more than 1 million records. How to fix this problem?
Thanks,
Jkrishna

Nope. WHat I meant was not to show the entire data in child report (ie your 1 million records). Instead add extra parameter as PageNumber. By default set it as 1 when you navigate to child report (default value)
Then in query behind use a ROW_NUMBER based logic like below
SELECT *
FROM
SELEC ROW_NUMBER() OVER (ORDER BY <combination of unique valued column(s)>) AS Rn,...
Your existing query other columns
)t
WHERE Rn BETWEEN ((@PageNo-1) * 1000) + 1 AND @PageNo * 1000
Assuming you want 1000 per page
So when it renders it will show first 1000 records. Add a NextPage icon to report footer and when clicked add a jump to report functionality to same report but with PageNumber parameter value as
=Parameters!PageNumber.Value + 1
and it will then give you second page data etc
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

BOMM - Lineage report not working for Views

Run the metadata integrators for SSIS package and BOBJ repository. Since views are used in the universe instead of the tables, lineage report is not pulling the SSIS package details. Any reason why its not?
P.S: Just replaced the tables with views thats it.
Appreciate any help!
Thanks
Chen

Please check your new company code assigned to ledger or not .
through transaction code GCL3.
Regards,
Sunny.

Developer portal reporting not working for all rooms ?

Seeing something interesting:
In https://portal.collaboration.adobelivecycle.com/ I'm seeing reports that are generating only for rooms that were manually created ( I created them through dev portal, the rest of the rooms are dynamically created ):
All dynamically generated room have the following reports:
All manually created rooms have the following reports:
Alex G.

Recorded session reports ( Dev Portal > My Recordings > Report ( button ) ).
Dynamic rooms - the process is basically keep a cache of 100 rooms, create more if we go below that number. This helps us always have enough rooms. So it's possible we've requested a room 6 months ago and it's going to be used eventually. Is it because the room was generated a while back ( since reports are showing Aug 1 - Aug 12 timeline ), while the room could have been created before that span of time ?
Those sessions were recorded yesterday so should have had plenty of time to get the data.
Thanks!
Alex G.

Out of office replies in Exchange 2013 not working for external recipients

Hi,
Few days ago a couple of company workers went to vacation. They set up OOF automatic replies in OWA 2013. However automatic replies are not working for external recipients (outside of company). Internal users (company users) receive OOF notification.
I'm using smart host in sender connector configuration (SMTP server of internet provider) to deliver emails. Any clues about this problem ? Please find below part of the transaction log. For testing purposes i set up administrator account
to be on vacation.
HARED... SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
DROP     ROUTING
[email protected]
{[email protected]}             Automatic reply: vacation test
AGENT... AGENT    [email protected]
{[email protected]}             Automatic reply: vacation test
HARED... SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
AGENT... AGENT    [email protected]
{[email protected]}             Automatic reply: vacation test
TRANSFER ROUTING [email protected]
{[email protected]}             Automatic reply: vacation test
FAIL     SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test

Hi Informus,
Please check if it is allowed in AllowedOOFType of the Remote Domain *
In Exchange 2013, the only way to see or change the current configuration for automatic replying and forwarding to the Internet is via the Exchange Management Shell (EMS) with PowerShell commands.
To get the currently configured Remote Domains, use:
Get-RemoteDomain
Name                           DomainName
AllowedOOFType
Default                        *
External
Get-RemoteDomain Default | fl AllowedOOFType, AutoReplyEnabled, AutoForwardEnabled
AllowedOOFType     : External
AutoReplyEnabled   : False
AutoForwardEnabled : False
To change the settings, use the Set-RemoteDomain command.
Enable automatic replies
Set-RemoteDomain -AutoReplyEnabled $true
Enable automatic forwards
Set-RemoteDomain –AutoForwardEnabled $true
Enable OOF for Outlook 2003 and previous (for Exchange 2007 and 2010 support)
Set-RemoteDomain –AllowedOOFType $ExternalLegacy
To change all these properties at once, you can use:
Set-RemoteDomain Default -AutoReplyEnabled $true –AutoForwardEnabled $true –AllowedOOFType $ExternalLegacy
Note:
Valid settings for the AllowedOOFType property are:
External
This is the default and only allows for the new style OOF messages as introduced in Outlook 2007.
ExternalLegacy
This settings allows for both the new style and old style OOF messages and needs to be set if you want to enable external OOF support for Outlook 2003 as well.
None
This setting doesn’t allow for the use of OOF messages at all (both internal and external).
InternalLegacy
This setting only allows for internal OOF messages to be sent for all Outlook versions.
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

Security option is not working for PDF Report

security option is not working for PDF Report , e.g password , bug??

what version of SQL Developer are you using?

LabVIEW Report Generation Toolkit for Microsoft Office

Hi!
One question. I have bought the LabVIEW Report Generation Toolkit for Microsoft Office
Version 1.0a and am trying to install it under Labview 7.1 but the installation stops with the error: "you need a Labview Version 6.0 runtime engine." Is there any possibility to install the toolkit anyway?
Regards
Stefan

Hi
You can try to update your Version 1.0 to Version 1.0.1. Then it should be working.
Here ist the link for the free update:
http://digital.ni.com/softlib.nsf/websearch/19003CF70BB8A57186256E5A00672E2A?opendocument
if it not works you can try to install the runtime engine 6.0 on your system. her is the link:
http://digital.ni.com/softlib.nsf/websearch/D5F11A64A905DB27862569EC005E31E2?opendocument&node=132070_US
Regards
Manuel

Add Report Generation toolkit for Microsoft Office in exe

Hi
I am having a problem. I am using LabVIEW 8.20, Report Generation Toolkit for Microsoft Office 1.1.2 and Microsoft Excel 2003. My OS is Windows XP (SP )
I want to build the vi attached below into an exe. The vis that I used are from addons>>_office>>excel.llb. I follow the suggestion found in the link below and add in all the files in excel.llb into my project so that it can be added into the executable as dynamic vis. However, some vis in excel.llb cannot be added into my project. After I have add all vis that can be added into the project, I build an application (exe) with the vi below as the Main vi and all other added vis (from excel.llb) as dynamic vis. After that, I build and run this exe on the same PC. I am unable to run it.
This vi will save datas when I click on the stop button. After I click on the stop button, a window will pop-up and prompt me to select which directory to save the vi. When I run the exe, I type in test.xls (for example) but the file saved is a picture and not an excel file. If I just run the vi instead of the exe, Excel will open and datas and graph will be displayed in Excel.
May I know where did I done wrong??
How do I use the Report Generation Toolkit in an executable with Microsoft Excel?
http://digital.ni.com/public.nsf/websearch/C38CE3F30542D65B86256F0E00740DD8?OpenDocument
Thank you & Regards
Lee
Attachments:
Self-Regulating.vi ‏132 KB
Untitled Project 1.zip ‏3841 KB

Hi centerbolt,
Thank you for your reply. I have tried adding in just that dynamic vi found in Excel Library and my main vi but it still cannot work. Is there anything that I need to look out as well?? [View attached picture.]
Thank you & Regards
Lee
Attachments:
added.JPG ‏92 KB

LV Report Generation Toolkit for Microsoft Office says "This VI or item belongs to a library that is expired or invalidly licensed"

I have downloaded the LV Report Generation Toolkit for Microsoft Office for evaluation with LabVIEW 2010. The examples for the Help get many errors, including "The subVI is not executable. You must fix all errors in the subVI before this VI can run." and "This VI or item belongs to a library that is expired or invalidly licensed".
I selected that I wanted to evaluate the toolkit instead of putting an activation code during installation. Installation went OK.
How can I get the examples in this LV Toolkit to Run so that I can evaluate it?
Solved!
Go to Solution.

Also when I place the MS Office Report function in my block diagram, I get: "Unable to View Properties" popup message and no Contextual Help on the function.
How can I get these RGT function to work properly so that I can evaluate the toolkit?

How do I put data into a template using the Labview report generation toolkit for Microsoft Office?

I am running Lookout 5.0 and have recently purchased the Labview Report Generation Toolkit for Microsoft Office to create reports from my Lookout logged data. Since I have never used Labview I am having my problems. I tried following the tutorials but they do not seem to be examples of what I want to do.
I log rainfall totals (1 spreadsheet)in Lookout from 40 different sites in 5 minute increments. I copy these totals and paste them into another spreadsheet which sums them up to give me hourly totals and then paste those totals into a spreadsheet for distribution.
In Labview I create a new report and use the distribution sheet as my template, but how do I complete
the steps of loading the raw 5 minute data into labview and then paste it into the hourly total spreadsheet and then transfer those totals into the distribution template?
I have been trying to figure this out for over a week, and I am getting nowhere.
Any response would be appreciated.
Thanks
Jason P
Jason Phillips

Lookout saves the files in .csv form which can be opened in Excel. I did make some progress by using the "append table to report" vi which allowed me to put values into an array and then those values were entered into my template on my report vi.
Where I am stuck now is I want to be able to put values into my template from a .csv file, not from an array I have to manually put numbers in.
Once those values are in my template I want to pull summed values from the template and place them into a final excel file for printing.
I have attached examples of the files I am working with to help you better understand what I am trying to do.
I hope that makes sense.
Jason Phillips
Attachments:
HourlyTotalsTemplate.xls ‏120 KB
eb_rain_gauge_ss.csv ‏23 KB
EastBankHourlyRainReport.xls ‏28 KB

S_ALR_87012936 :Report Not Running for future ( It's an urgent Issue )

Hi ,
When I am trying to execute (S_ALR_87012936) dep simulation report for the
Year FY 2007 and FY 2008 it is working, when i try to execute for FY 2009.,2010 it's not working.
1)Is there is any setting which we need to do so that report will work for FY 2009/2010
2) What else we can do so that it will work for FY 2009/2010.
Regard's
Sachin Saboo

have you modified a simulation-variant?
-> goto dynpro-field <b>PA_SI</b>MVR - F4 - create
or over tcode SPRO
A.
Message was edited by:
Andreas Mann

XL Reporter not working for MS Office 2007

Similar Messages

Maybe you are looking for