XL REPORTER NOT WORKING IN CLIENT

Hi
Anybody help me regarding my issue.
I am using SAP 2007 B version. In Server XL reporter is working without any problem. But in client it not opened. The Error says Wrong executable digital signature for Add on.
Any body tell me how to rectify this issue
Balaji

Hi ........
Repair DI API and then try this addon again and clear Temp Files....
Hope this will solve your problem..
Regards,
Rahul

Similar Messages

Crystal Reports not working at client Machine

Hello,
We developed few reports through crystal report tool .All the reports are working fine at server but when we go into client workstation than reports are not working and it also not showing any error.
I already Install Microsoft Framework 2.0 service pack 1, Crystal runtime and crystal prerequisite at client workstation.
Please reply ASAP.
With regards
Amit Tyagi

Dear,
I think you should go to the following link for your query about SAP Business One and Crystal Reports
SAP Business One and Crystal Reports
Regards
Apple

Drill down report not working in 1og report

hi all,
Drill down report not working in 1og.
in 6i it working good but 10g not working .
plz help any one.
thanks

Hello,
For detailled instructions about hyperlinks :
Oracle® Reports Building Reports
10g Release 2 (10.1.2)
B13895-01
3.6.10.1.8 Creating a hyperlink using the Property Inspector
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#i1062802
Regards

CDR report not working

Hi,
We have LYNC 2013 and Monitoring is enabled. the CDR report is not working. even User Activity summary for telconferencing and for audio, reports not working.
Kindly suggest troubleshooting steps.
Can we have any SQL query to fetch the report from database?
Thanks
jitender

Hi Raju,
From Monitoring server , CDR report is not working. Even "User Activity Report" not working and giving below error for "Telephony Conference" and as well for "A/V Conference"
" No results match the report filters. Change the filter values and submit the query again."
Thanks
jitender

IPS event monitor and reports not working

Dear after upgrading my IPS from E3 to E4  the event monitor and reports not working, can you please advice my to solve this issues

Hi All,
Filter settings below:
The filter works partially as I don't get alerts on the IPS itself.
Firewall LOG:
4          Feb 14 2014          15:33:22                              39715                    514          IPS requested to drop UDP packet from SOURCE_VLAN_NUMBER:/39715 to DESTINATION_VLAN_NUMBER:/514
IPS LOG (when enabled):
evIdsAlert: eventId=1352793300955167909 vendor=Cisco severity=low
originator:
    hostId: SSM02
    appName: sensorApp
    appInstanceId: 1192
time: Feb 14, 2014 15:33:22 UTC offset=0 timeZone=GMT00:00
signature:   description=IP Fragment Too Small id=1206 version=S212 type=anomaly created=20030801
    subsigId: 0
    sigDetails: Too many small IP fragments in datagram
interfaceGroup: vs0
vlan: 0
participants:
    attacker:
      addr: 172.x.x.x locality=OUT
      port: 39715
    target:
      addr: x.x.x.x locality=OUT
      port: 514
      os:   idSource=unknown type=unknown relevance=relevant
alertDetails: InterfaceAttributes: context="single_vf" physical="Unknown" backplane="GigabitEthernet0/1" ;
riskRatingValue: 50 targetValueRating=medium attackRelevanceRating=relevant
threatRatingValue: 50
interface: GigabitEthernet0/1 context=single_vf physical=Unknown backplane=GigabitEthernet0/1
protocol: udp
Our next step is to make a service policy exception on the firewall itself. We are also considering reloading the IPS device or at least the analysis engine.
Thanks for all your help so far. Any more suggestions are most welcome. I'll keep you up to date.
Regards
Mariusz

After i install Visual-Studio 2013 crystal-report not working

hi
after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
when i try to open crystal-report i see this:

Hi E_gold,
Crystal Reports forum may be a better place for you.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Interactive Reports not working with APEX listener

Hi,
I have posted this question APEX listener forum couple of weeks ago but very few responses.
If any one from here can help then it would be great.
Interactive Reports not working with APEX listener
Best Regards,
Baig

Sorry for late response.
It was a firewall issue

Windows 7 Client Operating Systems (Aggregate) reports not working

Hello All,
We are using Windows 7 Management pack in SCOM 2012.
We tried running reports in Widnows 7 Client OS (Aggregate) MP.
There is no data in the report. Do we need to enable any rules to collect data for these reports?
We need Memory related reports in this MP.
We have windows 7 agents and we can performance data in OPS console for those agents.
Thanks!!

Verify that you install windows 7 management pack from below link
http://www.microsoft.com/en-us/download/details.aspx?id=15700
You can also check below link to resolve your issue
http://social.technet.microsoft.com/Forums/en-US/54efc509-cbb0-407c-b826-17694cd5f0bc/windows-7-client-operating-systems-aggregate-reports-not-showing-any-data?forum=operationsmanagerreporting
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Report not working from forms.

Hi
we are beginners and please help us.we have installed in LAN database 11g on vista
and application server 10g on os 2003.
we are developing some applications from our developer pc in vista and using developer suite 10g.
we want to generate some reports and call them from forms.
This is the code in when button pressed.
DECLARE
repid REPORT_OBJECT;
repjobid VARCHAR2(200);
repstatus VARCHAR2(200);
repjobno number;
repserver VARCHAR2(100) := 'rep_mbxserver_FRHome1';
BEGIN
repserver := 'rep_mbxserver_FRHome1';
/* Check to see if forms application is WEB deployed */
IF get_application_property(user_interface) = 'WEB' THEN
message('web');
repid:= FIND_REPORT_OBJECT('REP');
message('report found');
/* Set Report parameters given WEB deployment */
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,'e:\users\pro\reports\emp.rdf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,repserver);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
/* DESFORMAT could be HTML, HTMLCSS or PDF here */
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'HTML');
/* Run the report */
repjobid := RUN_REPORT_OBJECT(repid);
message('run report');
/* Check the report status */
repstatus:=REPORT_OBJECT_STATUS(repjobid);
WHILE repstatus in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
repstatus := report_object_status(repjobid);
message('rep status');
END LOOP;
IF repstatus='FINISHED' THEN
message('REPORT WAS CORRECTLY RUN');
/* Display the report output in the client browser */
repjobno := length(repserver) + 1;
WEB.SHOW_DOCUMENT ('http://printer1.mbxnet.com:8889/reports/rwservlet/showjobs?server='||repserver,'_blank');
copy_report_object_output(repjobid,'\\ansu\mtb-erp\emp.lis');-- (Trying to copy to local folder)
message('File copied to local pc');
/* If report has failed display message to user */
ELSE
message('REPORT FAILED WITH STATUS: '||repstatus);
END IF;
message('222222222222');
ELSE
/* Else if forms application is Client-Server deployed */
/* Set Report parameters given Client-Server deployment */
message('client server');
repid:= FIND_REPORT_OBJECT('rep1');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,'e:\users\pro\reports\emp.rdf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,file);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,'\\printer1\mtb-erp\emp.lis');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt.prt');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,repserver);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=NO');
/* Report to be executed via Reports Background Engine, not the 'new' Reports Multi-Tier Server */
/* Destype SCREEN or PREVIEW can be used here */
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,SCREEN);
/* Run the report */
repjobid := RUN_REPORT_OBJECT(repid);
copy_report_object_output(repjobid,'\\printer1\mtb-erp\emp.lis');
message('File ok');
-- host('c:\mtb-erp\ansu.lis');
END IF;
END;
we are struck and unable to proceed.Actually when we run the report from report builder it works.we are calling the report from application server.
Also if we replace the above web.show document with this statement it works but even though it gives FRM-41214 error.
web.show_document('http://ansuya.mtbnet.local:8889/reports/rwservlet?destype=cache&desformat=html&report=\\mbxserver\developers\emp.jsp&userid=scott/tiger@mbxsql&paramform=no');
One more doubt , is it possible if we don not want to show the report in a browser in case of client server locally in lan
but just generate the report from forms and save it in local folder like we do in previous old versions.If so please guide us.
Thanks in advance.

Hello ansu,
Did you solve this problem ?
Regards,
Felipe.

Report not working in my system

Dear All,
I have Developed a ZHR report. But the problem is the it is working only on my ABAPers Terminal(PC) and not on mine.
Not working means the Action that it should trigger in PA40 is not happening.
The Client is same.
The User ID is same.
The User parameters are same.
The GUI Version is same.
The authorizations are the same.
Is there any other setting that i need to check.
Regards,
Saureb Bannerjii
SAP HR Consultant

hi,
one possiblity is to check the user profile of your abaper's login and your login. If you are using different login id for checking the reports
Regards
SAmeer.

Crystal report not working on 64 bit machine

Hello friends,
Hope everyone is doing good. I have an issue and you all are requested to help me out.
I have build an Application using VS 2008, i used Oracle 10g as database and Crystal report 2008 for reports. The Application and reports are working fine when i deploy it on 32 bit machine, but when I deploy it on a 64 bit machine, my Application works fine but reports are not displayed, when ever i run report it ask Db credential with the following message
"The report you requested requires further information."
then Server, user ID and password filed, I off course supplied credential but no results.
For resolving the issue i installed VS 2008 on 64 bit machine with redist CR Viewer and tried to verify database for the report thinking this might be an issue, but in CR designer it gives me following error when i tried to verify database or create new connection using OLEDB provider for Oracle
Crystal Reports ActiveX Designer
Logon failed.
Details: ADO Error Code: 0x
Source: Microsoft OLE DB Provider for Oracle
Description: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.
OK
I tried the following fixes as well:
- Installed CR viewer for 64 bit machine
- Registering ORAOLEDB10.dll
- Reinstalling VS 2008
The Application works fine but Crystal reports are malfunctioning. Please help!!!!!!!!!!!!!!!
Thanks a ton in Advance
Happing coding and resolving issues
Danish Mustafa Khan

Also, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e] article.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Web Report not working with parameter form

Hi,
I have a report which has got a parameter form. This report is
running fine in client/server environment. But when I deploy the
same report on web (CGI) using PARAMFORM=YES, I am getting the
parameter form and after pressing the SUBMIT button I am getting
a blank report under the following two cases even though I have
data for that query:
CASE1: <input type="hidden" name="desformat" value="html">
then I am getting the report with no data retrieved.
CASE2: <input type="hidden" name="desformat" value="pdf">
then I am getting completely blank report (no logo, no column
titles, etc.)
See the HTML code below. Remember, the same thing is running
fine in client/server environment. Moreover, if I make a HTML-
coded form for the report then everything on the client's
browser is running fine. But this is not what we want, 'coz we
are running the "BEFORE PARAMETER FORM" trigger in the report.
So, should I conclude that web-reports does not work with the
parameter forms?? Is it a bug???
Regards
Moiz
----------HTML Code------------------
<form action="http://pc-oracle1.ri.kfupm.edu.sa/cgi-
bin/rwcgi60.exe">
Select the Weekend Date for which you would like to see your
Timesheet report
<input type="hidden" name="server" value="repserver">
<input type="hidden" name="report" value="timesheet.rdf">
<input type="hidden" name="userid" value="696122/696122@ors">
<input type="hidden" name="destype" value="cache">
<input type="hidden" name="desformat" value="html">
<input type="hidden" name="paramform" value = "yes">
<input type="submit" value="Run Report">
</p>
</form>
-------HTML Code END------------------
null

No pal, that's not the problem. The problem lies with the
"BEFORE PARAMETER FORM" report trigger on the web. Check this
out on ur report server and u will understand my problem.
Moiz
Ramonito Te (guest) wrote:
: I think the cause is the missing question mark after
rwcgi60.exe.
: Anyway here is my html file that runs under cgi. Hope this
helps.
: <HTML>
: 
: <FORM METHOD=POST
: ACTION="http://ntserver1/ows-bin/rwcgi60.exe?" METHOD="POST">
: 
: <INPUT name=server type=hidden value="ReportsServer">
: <INPUT name=paramform type=hidden value="yes">
: <CENTER><H1>Set Reports Multi-tier Server Parameters </H1>
Report Name: <INPUT name=report type=text value="c:
: \orant\webdemo\deptemp.rdf">
: Database Connection: <INPUT name=userid type=text
: value="scott/tiger@orcl81">
: <INPUT name=destype type=hidden value="cache">
: Output Format: <SELECT name=desformat> <OPTION value=HTMLCSS
: selected> HTMLCSS <OPTION
: alue=PDF> PDF </SELECT>
: <HR><INPUT type=submit value="Run Report!">
: </CENTER> </FORM> </HTML>
: lue="Run Report!">
: </CENTER> </FORM> </HTML>
: M. Moizuddin (guest) wrote:
: : Hi,
: : I have a report which has got a parameter form. This report
: is
: : running fine in client/server environment. But when I deploy
: the
: : same report on web (CGI) using PARAMFORM=YES, I am getting
the
: : parameter form and after pressing the SUBMIT button I am
: getting
: : a blank report under the following two cases even though I
: have
: : data for that query:
: : CASE1: <input type="hidden" name="desformat" value="html">
: : then I am getting the report with no data retrieved.
: : CASE2: <input type="hidden" name="desformat" value="pdf">
: : then I am getting completely blank report (no logo, no
column
: : titles, etc.)
: : See the HTML code below. Remember, the same thing is running
: : fine in client/server environment. Moreover, if I make a
HTML-
: : coded form for the report then everything on the client's
: : browser is running fine. But this is not what we want, 'coz
we
: : are running the "BEFORE PARAMETER FORM" trigger in the
report.
: : So, should I conclude that web-reports does not work with
the
: : parameter forms?? Is it a bug???
: : Regards
: : Moiz
: : ----------HTML Code------------------
: : <form action="http://pc-oracle1.ri.kfupm.edu.sa/cgi-
: : bin/rwcgi60.exe">
: : Select the Weekend Date for which you would like to see your
: : Timesheet report
: : <input type="hidden" name="server" value="repserver">
: : <input type="hidden" name="report" value="timesheet.rdf">
: : <input type="hidden" name="userid" value="696122/696122@ors">
: : <input type="hidden" name="destype" value="cache">
: : <input type="hidden" name="desformat" value="html">
: : <input type="hidden" name="paramform" value = "yes">
: : <input type="submit" value="Run Report">
: : </p>
: : </form>
: : -------HTML Code END------------------
null

Launching EAS from URL not working on client machine.

We are on version 11.1.1.4. When I use EAS URL on the server it is working fine. But when I use from a different machine other than the server it is not working, after selecting the "locale country" and clicking launch button it is giving the following error. i checked the java version also and client machine is on 1.6. I also tried on different IE versions. But from the same client machine I am able to connect through the installed version of EAS.
Is something I need to open ports or anything like that. Please let me know your suggestions or comments.
HTTP Status 404 -
type status report
description the requested resource () is not available
Hyperion embedded java container/1.0.0
Thanks,

Shiva -- Java version on the server and the client machine is same which is 1.6.0_24.
That is good point about the network. Actually the client and the server are not in the same network but I opened ports on the network router as well as I disabled windows firewall on the server to make sure it is not creating the problem.

Discoverer report not working on R12 !

We have just migrated to R12 from 11i and some of the discoverer query is not working, but the same is working fine when we ran thru SQL Developer or TOAD.
Is there any context (mo_global.set_policy_context) needs to be set in Discoverer report to get the data?
Thanks

Thanks Srini,
There is no any specific error message, the strange thing is if I run the Discoverer report is not returning any data, but if I set the mo_global.set_policy_context ('S',111) in SQL Developer or TOAD and then run the discoverer report it return data...
Any pointers?

Crystal Report not works in JAR File

I'm using Eclipse All in one, which includes Crystal Reports.. I Connected my Java program with Crystal Reports and its working properly. Now my problem is that the Report is not working in JAR files.. It throws some exception as
"com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: com.businessobjects
com.businessobjects.reports.sdk.JRCCommunicationAdapter---- Error code:-2147215357 Error code name:internal"
Whats the Error.. I don't know. I think that i may missed some CLASSPATH Files. The included CLASSPATH Files are:
ReportViewer.jar
jrcerom.jar
Concurrent.jar
CrystalCharting.jar
CrystalCommon.jar
CrystalContentModels.jar
CrystalExporters.jar
CrystalExportingBase.jar
CrystalFormulas.jar
CrystalQueryEngine.jar
CrystalReportEngine.jar
CrystalReportingCommon.jar
icu4j.jar
keycodeDecoder.jar
log4j.jar
MetafileRenderer.jar
rasapp.jar
rascore.jar
rpoifs.jar
Serialization.jar
URIUtil.jar
xercesImpl.jar
xml-apis.jar
and the mysql-connector jar file
Anybody help me please...

Unable to load database connector
'com.crystaldecisions.reports.queryengine..driverImpl.
DriverLoader
now you have any idea.. pleaseIs that a typo where you have two periods below?
queryengine..driverImplOther than that I don't think anybody here can help you with that. If your classpath includes all necessary JAR files and you are able to access all your resources from within your application JAR file, then I imagine there is a problem with the third-party crystal decisions JAR file or how you are attempting to use it.
My advice to you is to try and contact support with the vendor or provider of this API or possibly try posting on a support forum on their website to see if somebody can help you there.

XL REPORTER NOT WORKING IN CLIENT

Similar Messages

Maybe you are looking for