XL-Reporter - Only codes are evaluated - names appear as 0

SAP Version: SAP 2005 A (6.80.319) SP01, PL29
XLR Version: 6.80.367
Hello everybody,
I defined a rather simple report in XLR - I just want to see a list of all my clients with codes and names (I used the advanced report designer because the following is only part of a complex report):
row selection - expansion: BPA(CardType = "C")
attributes: =ixDimGet("BPA"; "CardCode"), =ixDimGet("BPA"; "CardName")
The result is a list of all clients defined in SAP with their codes,
but all names are displayed as 0 !
This problem appears also with other attributes than CardName and can also demonstrated with Items (ItemCode, ItemName, ...)
Thank you for your help!
Frank Romeni

Hello Frank,
I have had similar issues to this. The way i have found to get around it is to add a measure or light dimension to the report such as the following field =ixGet("SO_LineTotal"). I then just hide the column containing that field. Its not an ideal way around it but it's the only way to get a simple list like that.
On the Row Expansion I also untick the "Do Not Display Blank Records".
Kind regards,
Adrian Johnson

Similar Messages

All my contacts are stored with country code for eg 233 244 123456. Contact names do not appear during incoming calls. Once the country code is removed , names appear. Please help

All my contacts are stored with country code for eg +233 244 123456. Contact names do not appear during incoming calls.
Please help

http://discussions.apple.com/thread.jspa?threadID=2280669&tstart=0

I cannot sign in, it shows sign in at top left corner only but area does not appear where I normally put my password in.

1. I go to Firefox
2. I go to hotmail
3. I sign in BUT
4. Firefox will not let me sign in shows '''sign in''' at top left hand corner only& will not go any futher therefore section where I normally sign in & put password does not appear
5. Tried all day/night

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

If I store name's phone number with a country code eg. 218-925555555 and I receive a call as 0925555555 then only number is appeared and no name appears

if I store a name with phone number with a country code eg. +218-925555555 and I receive a call from that pearson then only number ( 0925555555 ) is appeared but no name.
and visa versa when I store 925555555 and I receive a call from that pearson then only number ( +218-925555555 ) is appeared but no name.
moreover, the same happens with messaging

cmauze2 wrote:
Ann154 wrote:
What happened to your old SIM card? You should have been able to move that card to the new replacement device.
[quoted]:
"Sales clerk asked me if I had a Sims card for it. I told him that there`s one in my old phone. He explained to me that it was not going to be working..."
Or were you referring to the one in the old temporary replacement device? Would that even be compatible with the newer phones?
The one that wasn't working had a 4G LTE SIM card in it. It should have usable in the replacement Razr. It was only until I read the OP a third time this morning that there might be a third device involved. It would be nice if people would give more specifics on what devices are active at what time. Then the readers of this community can follow the progression of the events better.

While running FBL5N (Business area wise) customer code and customer names a

Hi Gurus,
While running FBL5N (Business area wise) customer code and customer names are not appearing.

Hi Raju,
Please click on the change layout screen button on the screen of FBLN5N report. then select the fields customer code and customer name from the right hand side table and drag it to left hand side table.
After that run the report again. it will appear. please assign points.
Rgds
Manish

Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
- Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
this, after normal behavior for more than a year since purchase of the iPod.
- Different podcasts have been affected at different times, after changes in the state of the iPod.
- Only podcasts are affected.
- This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
- The only change to iTunes, the Mac, or the iPod is that just before this condition began
I’d begun syncing an iPhone via iTunes.
I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
As I said, this involves only podcasts. All other content on the iPod does appear in iTunes.

I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
Need Help!!!

FF Id Owner Name appears different in SPM report campared to Backend

Hi Team,
We have SPM 5.3 installed and we are using user based Firefighter concept.
I have run the SPM report ( log summery report , transaction usage report and detail log report ) today. There the FF id Owner name appearing is different with respect to what we maintained in ' Owners' tab in backend firefighter Dash board. Even in the Backend log report it is appearing different . Means at Backend and SPM ( GRC front end) both the places FF id owner is appearing different w.r.t what we maintained in Owner tab of Backend system.
Please suggest what can be the issue . And where I need to change the confirguration to make the report consistant with what we maintained in Owner tab of Backend system.
Looking for your earliest response.
Regards,
Kakali

Kakali,
Have you got multiple owners defined in the backend system? Sometimes that causes inconsistencies.
I have noticed that there is a Bug in SAP Note 1168121 which means that the owner is missed off the email log reports in SPM up to SP08 and that might also be the issue.
Simon

TS2972 Only 9 Artist Names appear on the list

When I connect to my Home Sharing Library from my PC (running iTunes version 11.0.1.12 on Widows xp prof. service pack 3) with my iPhone 4s (iso version 6.0.1) it will only list 9 artist names and 85 album names yet there are about 5,000 songs and over 1,200 albums. I can view all the songs and see the artist name and album under each song so I know they are all tagged. Befor I upgraded to itunes version 11.0.1.12 I don't think I had this problem, it was listing so many artists and albums I assumed it was listing them all.
I have tried moving the library but this hasnt changed anything. I have also rebooted both devices without any success.
My apple TV lists all the artists and albums so I guess the problem must be with the iphone?
Can anyone help please?
Chris

Hi,
I am not entirely sure I completely followed all of that.
You can set two computers to have the same Screen Name and allow them to Log in to the AIM servers at the same time.
The Bonjour Buddy List takes the name from the Address Book so you can not login in to both computers as Gregory Lazarchik as the Mac User on Both (If that is how your Name is in the Address Book).
Going back to the AIM (Apple valid as well) Name. Once both computers are logged in with the Same Screen Name you can not appear in each others Buddy List (iChat does not allow you to Add yourself to the Buddy List)
This used to be possible in iChat 2 and you could text chat to "yourself"
AS I said before the other Issues are about the settings in iChat > Preferences > Accounts > Security about Allow and Block lists (At BOTH ends) that make people appear Off-line over AIM - Well that and Spelling of the Screen Name or adding them as @mac.com when they should be @me.com or an AIM name
Using my name for example
ralphjounsr
[email protected] and
[email protected] are three different Buddies
As only one of those is correct you would see the others as Off-Line because the AIM Servers don't tell you if the name is a valid (in use) name.
I am glad that you are sorted on this.
12:37 PM Sunday; February 1, 2009

Some contacts have disappeared from my phone contacts. They are still in the phone because if someone calls me their name appears and if i search in text for contacts they are still there - but if i search in phone contacts they are not there, Help

Some contacts have disappeared from my phone. Not all just random ones. They are still in the phone because if someone (who has disappeared from my phone contacts calls me their name appears and if i search in text messages for contacts they are still there - but if i search in phone contacts they are not there, Help!

But once again, I do not want to lose my other texts, app progress, and photos. I could sync the photos but i would still lose the app progress and texts. I would only restore if it was the only option left, but the other space, as already stated, isnt the main concern. The main concern is those 'deleted' texts. If they go, then a good size chunk of the other space goes. I know you CAN delete texts for good. It worked fine before. All i want to know is why its not working for me now, and how to fix it.
I also know that when you delete texts on your iphone, they get marked for deletion, however they stay on your device (thats why they show up when you search for them.) then when you sync your device with itunes, the texts marked for deletion should disappear. When i synced they didnt disappear. Thats what i need an explanation/solution for. Why the texts marked for deletion didnt get fully deleted after the sync.

What are the names and the parameters of the SSIS reports

what are the names and the parameters of the SSIS reports
(delivered with and included in the SSMS)
to navigate from my reports to the build in reports
it's necessary to know the reportname and the parameters.
I want to "combine" respectively want to navigate
from custom reports (works excellent) to the 5 build in reports
please have a look at the attached picture and in particular
to the blue arrow.SSIS_ReportsNavigation
thank you for providing an answer or a hint.

to navigate from my reports to the build in reports
Those integrated reports in SSMS are not hosted in SSRS, so there is no URL available where you can navigate to.
The reports run in client side rendering mode = RDLC.
Olaf Helper
[ Blog] [ Xing] [ MVP]

HT3783 I have created a distribution list of 22 names in my Contacts Folder. When I try to send an e-mail using the alias, only 7 of the 22 names appear in the address line. Why don't all the names appear?

I have created a mail box with 22 names in it. When I want to send an e-mail to this address and its recipients, only 7 of the 22 names appear in the address line of the e-mail. Why won't the remaining 15 names and addresses appear in the address line?

okay, this is actually a common problem. from your main screen select the blackberry key (next to track ball)->options->security->general settings->include address book->no->reset phone->problem should be fixed!
let me know if this works for you,
Andrew
Andrew Hager
U.S. Cellular Corporation
Smartphone Specialist

Tax codes are not appearing in FB70 drop down list.

Hi all,
I have created some new taxcodes and assigned them with company code.
Now these tax codes are not appearing in FB70 down list.
Can anyone suggest the solution for this?
Thanks & regards,
Rupam.

HI,
To appear the TAX codes in FB70 dropdown list you need to assign those new tax codes in the below configuration.
Spro -> financial accounting -> Accounts Receivable and Accounts Payable ->Business Transactions-> Outgoing Invoices/Credit Memos->Outgoing Invoices/Credit Memos - Enjoy ->Define Tax Code per Transaction
in that selct your country and in the next screen select new entries button and add those new tax codes. when adding chose the option FIAR FInancial accounting out going invoices. and save the entries.
after this setting you can able to see those new tax codes in FB70 dropdown list.
hope this helpful.
Regards,
Sandhya.

Superfluous names appear after I type the first letter of a person's name in the address bar of my text message program. How do I delete them. They freqiuently are people I never text, but had a text encounter with i the past.

Superfluous names appear after I type the first letter of a person's name in the text message address bar. Most of these names are people I rarely if ever have contact with, but may have once or twice. They are not in my contact list. How may I get rid of them?

They will also be listed in 'Previous Recipients' in Mail. You should also delete them there.

I have stored password in password manager. it is working properly but in last few day only account name appears and in password bar there is no password. How

I have stored password in password manager. it is working properly but in last few day only account name appears and in password bar there is no password. How can I solved this problem?

Try this
*http://kb.mozillazine.org/User_name_and_password_not_remembered

In my iPhoto library, only some images appear as thumbnails. The rest are blank but appear briefly when scrolling through or properly when double clicked. Any ideas?

In my iPhoto library, only some images appear as thumbnails. The rest are blank but appear briefly when scrolling through or properly when double clicked. Any ideas?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

XL-Reporter - Only codes are evaluated - names appear as 0

Similar Messages

Maybe you are looking for