XL Reporter Security error
Hi all,
I looked at the previous threads regarding the error recieved when running XL Reporter with Excel 2007.
I followed the tips but I am still getting the same error. I am on SBO 2007 PL30. I uninstalled the client and re-installing it but it still gives the same error....
Any suggestions???
Dear Noor,
Please check the Security settings once more. In addition to
SAP note 853821, please follow the steps below (slightly different to steps
in the note):
1) Open Excel
Tools-> Macro-> Security-> Trusted Publishers tab
On the Trusted Publishers tab:
-> Untick Trust all installed add-ins and templates.
-> Tick Trust access to Visual Basic Project
2) Close Excel
3) Open Excel
-> You should have a security warning 'contains macros' by
Microsoft Corporation
Tick-> Always trust macros from this publisher
and
click-> Enable Macros
4)Open from Excel
Tools-> Macro-> Security-> Trusted Publishers tab
and
Tick -> Trust all installed add-ins and templates
Please go back in again to make sure that the settings take effect as
sometimes they do not.
Also in the macro security use the security level Low or Medium.
At the same time check the SAP note 853343.
Also please refer to the following link to get the details information of the above settings in excel 2007.
http://office.microsoft.com/en-us/excel/HP100968341033.aspx?pid=CH101020
751033#COMAddIn
Regards,
Rakesh pati
SAP Business One Forum Team
Similar Messages
-
REPORTS SECURITY WITHIN WEBDB (setup errors)
As per WebDB and Reports 6i requirement, i
ran the two script files
D:\orant\report60\server\security
rwwwvins.sql webdb
and
D:\ORANT\REPORT60\SERVER\SECURITY\RWENABLE.SQL
Got errors while creating some package definitions..
those package include
package specs:
rw_comp_cal
rw_cpc_pm
package body:
wwv_rw_utl
wwv_rw_usr
wwv_rw_adm
rwutlsave
rwutlbuild
wwv_rwrepgen
rw_comp_cal
rw_cpc_pm
wwv_rwmanrwo
Warning: Package created with compilation errors.
No errors.
attached :spool file which had errors listed
SQL> @d:\orant\report60\server\security\rwwwvins.sql webdb
B E G I N O R A C L E R E P O R T S I N S T A L L
...start: Monday 27 December , 1999 14:53:43
Role dropped.
Role created.
old 1: grant RW_ADMINISTRATOR to &&1
new 1: grant RW_ADMINISTRATOR to webdb
Grant succeeded.
Role dropped.
Role created.
Role dropped.
Role created.
Role dropped.
Role created.
I. Extent utlobj.sql
Table dropped.
Table created.
Table dropped.
Sequence dropped.
Sequence created.
Table created.
Table dropped.
Table created.
Table dropped.
Table dropped.
Table dropped.
Table created.
Table created.
Table created.
Trigger created.
II. Extent moduleda.sql
0 rows deleted.
delete from WWV_SYS_MODULE_TYPES$ where ID >= 50 and id<60
ERROR at line 1:
ORA-02292: integrity constraint (WEBDB.WWV_MODULES$_FK) violated - child record found
delete from WWV_SYS_MODULE_GROUPS$ where ID >= 50 and id<60
ERROR at line 1:
ORA-02292: integrity constraint (WEBDB.WWV_SYS_MODULE_TYPES$_FK) violated - child record found
INSERT INTO wwv_sys_module_groups$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_GROUPS$_PK) violated
INSERT INTO wwv_sys_module_groups$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_GROUPS$_PK) violated
INSERT INTO wwv_sys_module_groups$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_GROUPS$_PK) violated
INSERT INTO wwv_sys_module_groups$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_GROUPS$_PK) violated
Commit complete.
Finished groups
INSERT INTO wwv_sys_module_types$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_TYPES$_PK) violated
INSERT INTO wwv_sys_module_types$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_TYPES$_PK) violated
INSERT INTO wwv_sys_module_types$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_TYPES$_PK) violated
INSERT INTO wwv_sys_module_types$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_TYPES$_PK) violated
INSERT INTO wwv_sys_module_types$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_TYPES$_PK) violated
Commit complete.
III. Install Oracle Reports packages
Package created.
No errors.
Package created.
No errors.
Package created.
No errors.
Package created.
No errors.
Package created.
No errors.
Table dropped.
Table created.
Grant succeeded.
Package created.
No errors.
Table dropped.
Table created.
Table dropped.
Table created.
Table dropped.
Table created.
Table dropped.
Table created.
Commit complete.
Package created.
No errors.
0 rows deleted.
delete from WWV_SYS_MODULE_TYPES$ where ID >= 50 and id<60
ERROR at line 1:
ORA-02292: integrity constraint (WEBDB.WWV_MODULES$_FK) violated - child record found
delete from WWV_SYS_MODULE_GROUPS$ where ID >= 50 and id<60
ERROR at line 1:
ORA-02292: integrity constraint (WEBDB.WWV_SYS_MODULE_TYPES$_FK) violated - child record found
INSERT INTO wwv_sys_module_groups$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_GROUPS$_PK) violated
INSERT INTO wwv_sys_module_groups$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_GROUPS$_PK) violated
INSERT INTO wwv_s ys_module_groups$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_GROUPS$_PK) violated
INSERT INTO wwv_sys_module_groups$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_GROUPS$_PK) violated
Commit complete.
Finished groups
INSERT INTO wwv_sys_module_types$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_TYPES$_PK) violated
INSERT INTO wwv_sys_module_types$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_TYPES$_PK) violated
INSERT INTO wwv_sys_module_types$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_TYPES$_PK) violated
INSERT INTO wwv_sys_module_types$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_TYPES$_PK) violated
INSERT INTO wwv_sys_module_types$ VALUES (
ERROR at line 1:
ORA-00001: unique constraint (WEBDB.WWV_SYS_MODULE_TYPES$_PK) violated
Commit complete.
Warning: Package created with compilation errors.
No errors.
Package created.
No errors.
Package created.
No errors.
Package created.
No errors.
Package created.
No errors.
Warning: Package created with compilation errors.
Errors for PACKAGE RW_COMP_CAL:
7/5 PL/SQL: Declaration ignored
8/55 PLS-00382: expression is of wrong type
Warning: Package created with compilation errors.
Errors for PACKAGE RW_CPC_PM:
7/5 PL/SQL: Declaration ignored
8/55 PLS-00382: expression is of wrong type
Package created.
No errors.
Package created.
No errors.
Package created.
No errors.
Package created.
No errors.
Package created.
No errors.
Package created.
No errors.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM wwv_rw_adm_tst FOR &&1..wwv_rw_adm_tst
new 1: CREATE PUBLIC SYNONYM wwv_rw_adm_tst FOR webdb.wwv_rw_adm_tst
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM rwcaljmp FOR &&1..rwcaljmp
new 1: CREATE PUBLIC SYNONYM rwcaljmp FOR webdb.rwcaljmp
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM rwcalsum FOR &&1..rwcalsum
new 1: CREATE PUBLIC SYNONYM rwcalsum FOR webdb.rwcalsum
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM rw_comp_cal FOR &&1..rw_comp_cal
new 1: CREATE PUBLIC SYNONYM rw_comp_cal FOR webdb.rw_comp_cal
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM rw_cpc_pm FOR &&1..rw_cpc_pm
new 1: CREATE PUBLIC SYNONYM rw_cpc_pm FOR webdb.rw_cpc_pm
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM rwfindbx FOR &&1..rwfindbx
new 1: CREATE PUBLIC SYNONYM rwfindbx FOR webdb.rwfindbx
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM rwpform FOR &&1..rwpform
new 1: CREATE PUBLIC SYNONYM rwpform FOR webdb.rwpform
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM wwv_rwrepgen FOR &&1..wwv_rwrepgen
new 1: CREATE PUBLIC SYNONYM wwv_rwrepgen FOR webdb.wwv_rwrepgen
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM rwrunrpterr FOR &&1..rwrunrpterr
new 1: CREATE PUBLIC SYNONYM rwrunrpterr FOR webdb.rwrunrpterr
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM rwrunrpt FOR &&1..rwrunrpt
new 1: CREATE PUBLIC SYNONYM rwrunrpt FOR webdb.rwrunrpt
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM rwsbuser FOR &&1..rwsbuser
new 1: CREATE PUBLIC SYNONYM rwsbuser FOR webdb.rwsbuser
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM wwv_rw_usr_tst FOR &&1..wwv_rw_usr_tst
new 1: CREATE PUBLIC SYNONYM wwv_rw_usr_tst FOR webdb.wwv_rw_usr_tst
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM rwutlbuild FOR &&1..rwutlbuild
new 1: CREATE PUBLIC SYNONYM rwutlbuild FOR webdb.rwutlbuild
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM rwutlsave FOR &&1..rwutlsave
new 1: CREATE PUBLIC SYNONYM rwutlsave FOR webdb.rwutlsave
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM wwv_rw_adm FOR &&1..wwv_rw_adm
new 1: CREATE PUBLIC SYNONYM wwv_rw_adm FOR webdb.wwv_rw_adm
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM wwv_rw_err FOR &&1..wwv_rw_err
new 1: CREATE PUBLIC SYNONYM wwv_rw_err FOR webdb.wwv_rw_err
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM wwv_rw_usr FOR &&1..wwv_rw_usr
new 1: CREATE PUBLIC SYNONYM wwv_rw_usr FOR webdb.wwv_rw_usr
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM wwv_rw_int FOR &&1..wwv_rw_int
new 1: CREATE PUBLIC SYNONYM wwv_rw_int FOR webdb.wwv_rw_int
Synonym created.
Grant succeeded.
Synonym dropped.
old 1: CREATE PUBLIC SYNONYM wwv_rw_utl FOR &&1..wwv_rw_utl
new 1: CREATE PUBLIC SYNONYM wwv_rw_utl FOR webdb.wwv_rw_utl
Synonym created.
Package body created.
No errors.
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WWV_RW_UTL:
194/5 PL/SQL: Statement ignored
194/16 PLS-00382: expression is of wrong type
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WWV_RW_USR:
436/5 PL/SQL: Statement ignored
436/16 PLS-00382: expression is of wrong type
508/5 PL/SQL: Statement ignored
508/12 PLS-00382: expression is of wrong type
547/5 PL/SQL: Statement ignored
547/12 PLS-00382: expression is of wrong type
595/5 PL/SQL: Statement ignored
595/16 PLS-00382: expression is of wrong type
659/5 PL/SQL: Statement ignored
659/16 PLS-00382: expression is of wrong type
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WWV_RW_ADM:
157/5 PL/SQL: Statement ignored
157/16 PLS-00382: expression is of wrong type
217/5 PL/SQL: Statement ignored
217/16 PLS-00382: expression is of wrong type
272/5 PL/SQL: Statement ignored
272/16 PLS-00382: expression is of wrong type
Package body created.
No errors.
Package body created.
No errors.
0 rows deleted.
0 rows deleted.
0 rows deleted.
... HELP.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... HEADING.sql ...
... LARGEBOX.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... SECTION_IMAGE.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... BOX_IMAGE.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
...hint.sql...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
...mode.sql...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
...welcome.sql...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... S0.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
... S1.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... S2.sql ... users and roles
1 row created.
... S3.sql ... availability
1 row created.
1 row created.
... S4.sql ... required parameters
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
...S5.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... S6.sql ...
1 row created.
... S7.sql ...
1 row created.
1 row created.
Commit complete.
0 rows deleted.
0 rows deleted.
... HELP.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
... HEADING.sql ...
... LARGEBOX.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... SECTION_IMAGE.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
... BOX_IMAGE.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... S0.sql ...
1 row created.
1 row created.
1 row created.
... S1.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... S2.sql ...
1 row created.
... S3.sql ...
1 row created.
1 row created.
... S4.sql ...
1 row created.
1 row created.
... S5.sql ...
Commit complete.
0 rows deleted.
0 rows deleted.
... HELP.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
... HEADING.sql ...
... LARGEBOX.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... SECTION_IMAGE.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
... BOX_IMAGE.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... S0.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
... S1.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... S2.sql ...
1 row created.
... S3.sql ...
1 row created.
1 row created.
... S4.sql ...
1 row created.
1 row created.
Commit complete.
0 rows deleted.
0 rows deleted.
... HELP.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
... HEADING.sql ...
... LARGEBOX.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... SECTION_IMAGE.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
... BOX_IMAGE.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... S0.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
... S1.sql ...
1 row created.
1 row created.
1 row created.
... S2.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... S3.sql ...
1 row created.
... S4.sql ...
1 row created.
1 row created.
Commit complete.
0 rows deleted.
0 rows deleted.
... HELP.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... HEADING.sql ...
... LARGEBOX.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... SECTION_IMAGE.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... BOX_IMAGE.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
... S0.sql ...
1 row created.
1 row created.
1 row created.
1 row created.
... S1.sql ...
1 row created.
1 row created.
1 row created.
... S2.sql ...
1 row created.
... S3.sql ...
1 row created.
1 row created.
... S4.sql ...
1 row created.
... S5.sql ...
1 row created.
Commit complete.
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY RWUTLSAVE:
180/5 PL/SQL: Statement ignored
180/15 PLS-00382: expression is of wrong type
181/5 PL/SQL: Statement ignored
181/15 PLS-00382: expression is of wrong type
182/5 PL/SQL: Statement ignored
182/15 PLS-00382: expression is of wrong type
183/5 PL/SQL: Statement ignored
183/15 PLS-00382: expression is of wrong type
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY RWUTLBUILD:
0/0 PL/SQL: Compilation unit analysis terminated
1/14 PLS-00905: object WEBDB.RWUTLBUILD is invalid
1/14 PLS-00304: cannot compile body of 'RWUTLBUILD' without its
specification
Package body created.
No errors.
Package body created.
No errors.
Package body created.
No errors.
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WWV_RWREPGEN:
1122/5 PL/SQL: Statement ignored
1122/23 PLS-00382: expression is of wrong type
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY RW_COMP_CAL:
0/0 PL/SQL: Compilation unit analysis terminated
1/14 PLS-00905: object WEBDB.RW_COMP_CAL is invalid
1/14 PLS-00304: cannot compile body of 'RW_COMP_CAL' without its
specification
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY RW_CPC_PM:
0/0 PL/SQL: Compilation unit analysis terminated
1/14 PLS-00905: object WEBDB.RW_CPC_PM is invalid
1/14 PLS-00304: cannot compile body of 'RW_CPC_PM' without its
specification
Package body created.
No errors.
Package body created.
No errors.
Package body created.
No errors.
Package body created.
No errors.
Package body created.
No errors.
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WWV_RWMANRWO:
249/9 PL/SQL: Statement ignored
249/23 PLS-00382: expression is of wrong type
385/9 PL/SQL: Statement ignored
385/23 PLS-00382: expression is of wrong type
... grant Oracle Reports Menu privileges
PL/SQL procedure successfully completed.
... done
...end: Monday 27 December , 1999 14:57:25
D O N E I N S T A L L
SQL> SPOOL OFF
nullThe above error is occuring only if the script is ran over a pre-existing reports security on webdb.
The drop table commands in the scripts may be having some untested errors due to which the above errors resulted.
I had re-installed webdb and when
the above scripts were run for first time i didn't encounter those errors.
FYI.
Thanks. -
Last night when i tried to sign a document i received the mesage below and after that it says this document can't be signed what can i do to fix this problem.
Error encountered while signing:
The Windows Cryptographic Service Provider reported an error:
Access was denied because of a security violation.
Error Code: 2148532330I assume you are implying "biztax" application here, right?
I have contacted their program lead, with no result at all.
Past days I have been searching for a solution - reinstalls / new systems - no solution.
This issue appeared a week or two ago only.
I found http://forums.adobe.com/message/5338853 useful - but no positive results either.
http://test.eid.belgium.be/faq/faq_nl.htm obviously didnt help either.
If anyone finds a solution to this issue, please do let me know - any help is appreciated.
Biztax tells to use the "signature", not the "authentication" - but it is only Auth. that is showing up as option to sign (that works)
ps, did you fiddle with the Adobe Reader XI security settings and import that PKI etc as well? I hoped that would be the breaktrough. Sadly i'm still crying in my chair.
Oh, and dont forget: they claim nobody else got this issue. Maybe one or two people. (We got about 8 customers experiencing exactly the same symptoms at the same time )
> I noticed that when I try to open the pdf document that is 'signed' by the government it is not showing the filename in the title bar, but only " - Adobe Reader". every piece of info helps I guess.
Obviously last version of Reader 11.0.03 -
have added name to Sql server , users cannot access the report, getting error message ,
I have give all the permission to this users, so why this users still cannot look at the report,
and getting error message,
An error has occurred during report processing.
cannot create a connection to data source Ax live
for more information about this error navigate to the report server on the local server machine or enable remote errors.
can some please help me what this message means,
I really appreciate it
thanks In advanceIf "Credentials supplied by the user running the report" is selected, when the report is run, the user will be prompted to provide credentials. They would need to provide credentials that have the appropriate permissions (e.g., read, execute) to the
database. This prevents the double hop.
If "Credentials stored securely in the report server" is selected, you have to enter the username and password of a user (or service account) that has the appropriate permissions (e.g., read, execute) to the database. When the report is run, SSRS will use
these stored credentials each time to authenticate to the database engine and query the data. Users running the report are not prompted to provide credentials. With this option you can use an Active Directory or SQL Server account.
In order to access/run the report, a user will need to authenticate to SSRS. There are options here as well. You can provide them the link to the report manager and they can authenticate, navigate to, and run the report. You can also provide
direct links to reports that users click in a document or application. At this point the user is typically still prompted to authenticate to SSRS. You can also programmatically call the report using API's and essentially build a proxy that authenticates
to SSRS and open the report.
Not sure if that answers your question. -
PROBLEMS SETTING UP REPORTS SECURITY FEATURE
1. Trying to follow instructions to set up the Reports Security Feature.
2. Successfully run the script rwwwvins.sql
3.Hitting following Error
" Missing string(reports_security_desc) language(us) domain (wwc)sub_domain
(sec)
The portlets have similar names.
The pageORACLE_REPORTS_SECURITY has a display name of :
Missingstring(reports_security_desc) language(us) domain (wwc) sub_domain
(sec)"
4. Followed note 132625.1 with no joy. Same error.
Any help ?
nulldo you mean to say that you cannot enter any passphrase on the router web ui or on the wireless computer itself ??
if its on the router , then upgrade / reflash the router's firmware... -
5200: FR Essbase Report - POV Error
Hi All,
One of our user (non-admin) is getting the below POV error when he tried to run a FR Essbase report,
"5200:Error executing query :;has Pov Dims=0;pov XML=<?xml version ="1.0"?><datasources></datasources>"
we tried the following actions as a part of trouble shooting, but nothing worked so far,
- Verified the File --> Preferences in workspace and the POV settings is ON
- Reset the user POV using ManageUserPOV.cmd
- Deprovisioned & reprovisioned the user
- Verified the user security access
- we are able to run the report with other admin & non-admin logins
Kindly suggest us with a solution, if you have faced this error in your past.
Thanks,
SivaTry to reset his POV using the HYPERION_HOME\BIPlus\bin\ManageUserPOV.cmd utility.
You need to alter the ManageUserPOV.properties file to indicate his/her user ID
JTS -
Crystal Report Viewer error out when running multiple instances
Hi,
I am using java 1.4 with BO XI R3.0.
I notice I can only run one report at a time. If I was to run two reports, the 1st report will error out while 2nd report will run to its completion. Reports run on separate popup windows. I have tested with IE6, IE8 and also FireFox 3.0
Depending on the timing, I get different kinds of error.
"A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server. [RCIRAS9190] [RASLIB9002] "
"The Report Processing Server session you are using to connect is in the process of being shut down. You need to retry. [RCIRAS0200]"
I am using PSReportFactory and set parameters into CrystalReportViewer to display.
processParametersu2026
CrystalReportViewer viewer = new CrystalReportViewer();
pfieldDV = new ParameterFieldDiscreteValue();
pfieldDV.setValue(formatViewerParameterInputValue(tempRpt[1],tempParam[x]));
pfield.getCurrentValues().add(pfieldDV);
viewerParameters.add(pfield);
viewer.setParameterFields(viewerParameters);
createCrystalViewer(m_oReportWrap.getRequest(), response, sInstanceId,viewer);
private void createCrystalViewer(HttpServletRequest request, HttpServletResponse response2, String sInstanceId, CrystalReportViewer viewer) throws ReportSDKExceptionBase, FileNotFoundException, IOException, SDKException
IEnterpriseSession eSession = oLogon.getCESession();
IInfoStore iStore = oLogon.getInfostore();
IInfoObject rptObject = findInfoObject(iStore,sInstanceId);
IReportSourceFactory rptFactory = IReportSourceFactory)eSession.getService("","PSReportFactory");
IReportSource reportSource = rptFactory.openReportSource(rptObject,Locale.ENGLISH);
IReport report = (IReport)rptObject;
ConnectionInfo conn = new ConnectionInfo();
ConnectionInfos connInfo = new ConnectionInfos();
ServletContext sc = getServletConfig().getServletContext();
String realPath = sc.getRealPath("");
Properties prop = new Properties();
viewer.setOwnPage(true);
viewer.setDatabaseLogonInfos(connInfo);
viewer.setReportSource(reportSource);
viewer.setURI(request.getRequestURI() + "?reportID=" + rptObject.getID() + &viewerType=vwrTypeJavaSDK&viewID=1");
viewer.setEnterpriseLogon(eSession);
viewer.setHyperLink("New Window");
viewer.processHttpRequest(request, response2, sc, null);Thanks to both of you.
I actually was able to resolved this issue by tracking the values inside IEnterpriseSession.
// Perform Crystal Enterprise Logon
ISessionMgr oSessionMgr = CrystalEnterprise.getSessionMgr();
IEnterpriseSession m_oCESession = oSessionMgr.logon(sUserid, sPassword, sSystemName, getSecTypeString(iSecType));
System.out.println("in logon m_oCESession "+m_oCESession);
The UserInfo in the SeucuritySession: userInfo was always null so whatever i pass in, it was not storing them.
(EnterpriseSession:logon=(SecuritySession:userInfo=null)
All i need to do is to add IUserInfo userInfo = null; before IEnterpriseSession then it will store the user & password. -
After running 30-40 Crystal Reports we get a 'Report Load' error on the .Load() command. At this point we cannot run any of our 8 reports created with Crystal Reports. To resolve the issue we restart IIS and then the reports load and run without problem.
Recently we upgraded our project from .NET 1.1x, VS2003, CR 9.X to .NET 2.0, VS2005, CR 10.2. This intranet web site runs under IIS 6 on WS 2003. Prior to the upgrade we did not see this behavior.
To create the report we send Crystal Rerports a dataset and then output the report to a PDF. Any ideas on how we can resolve this issue?
Here is sample code for producing our reports:
<code>
Dim amortReportDocument As ReportDocument
Dim reportPath As String = Server.MapPath("./amort.rpt")
amortReportDocument = New ReportDocument
amortReportDocument.Load(reportPath)
amortReportDocument.SetDataSource(ds1)
Dim myExportOptions As CrystalDecisions.Shared.ExportOptions
Dim myDiskFileDestinationOptions As CrystalDecisions.Shared.DiskFileDestinationOptions
Dim myExportFile As String = FilePath & FileStamp & ".pdf"
myDiskFileDestinationOptions = New CrystalDecisions.Shared.DiskFileDestinationOptions
myDiskFileDestinationOptions.DiskFileName = myExportFile
myExportOptions = amortReportDocument.ExportOptions myExportOptions.DestinationOptions = myDiskFileDestinationOptions
myExportOptions.ExportDestinationType = ExportDestinationType.DiskFile
myExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat
amortReportDocument.Export()
Response.ClearContent()
Response.ClearHeaders()
Response.ContentType = "application/pdf"
Response.WriteFile(myExportFile)
Response.Flush()
Response.Close()
Response.End()
amortReportDocument.Close()
amortReportDocument.Dispose()
We added the following to the page unload event:
Private Sub page_unload(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Unload
GC.Collect()
End Sub
</code>Ok lets try this:
Right click on the temp folder (where the .rpt filed are getting created at runtime) -> properties.
go to Security tab.
click on Add.
enter (with out "") "IIS_WPG" in Object name window.
Click on Locations.
Select the machine name in the tree.
Ok.
Click on "Check names".
OK.
Give full control to it. (For testing purpose please ignore any warning signs).
OK.
Also please include the ReportDocumentObject.Close(), ReportDocumentObject.Dispose() and GC.Collect() in your page_upload event.
Does it help?
AG. -
Oracle Reports Security Settings page is blank--Urgent Please
Hi All,
When i click on "Oracle Reports Security Settings" under Administer tab and i'm getting a blank page. I didn't see any error messages.
Pl. help.
Thanks,
SapnaPlease refer to duplicate thread on the same topic at
error getting value from collection to a date picker field -
Hi All,
When i click on "Oracle Reports Security Settings" under Administer tab and i'm getting a blank page. I didn't see any error messages.
Pl. help.
Thanks,
SapnaPlease refer to duplicate thread on the same topic at
error getting value from collection to a date picker field -
XL Reporter-Security settings in Microsoft Excel prohibit XL Reporter
Hi
i am getting the following error when i run the reports in XL Reporter
XL Reporter-Security settings in Microsoft Excel prohibit XL Reporter from running.
I have made the following chnages
1. Start Microsoft Excel.
2. In the Tools menu, choose Macro->Security...
This opens the Security window.
3. Choose the Trusted Sources tab and make sure the Trust all installed add-ins and templates and Trust access to Visual Basic Project checkboxes are selected
I am still getting the same error.
Regards
FarheenHi Rekha,
In ref. SBO System that you are loggged on to, do you have admistration rights on the local computer.
Are you trying to open the XL reporter for the first time ?
Which version of SBO you are working on?
Regards,
Rakesh N -
Oracle Reports Security Settings page is blank
Hi All,
When i click on "Oracle Reports Security Settings" under Administer tab and i'm getting a blank page. I didn't see any error messages.
Pl. help.
Thanks,
SapnaHi,
Which version of portal are you using? Looks like it is a bug.
Thanks,
Sharmila -
E03 Program RSUSR003 Reports Security violation in SM21
Hello All,
I am getting below error in SM21:
"E03 Program RSUSR003 Reports Security violation"
============================================================
Documentation for system log message E03 :
The specified program encountered a problem. A short message in English
is output describing the problem.
If there are no other related entries in the system log, the program
solved or at least found a workaround to the problem.
If these messages occur frequently, or the program is unable to
complete processing, notify SAP of the message and include the module
name and location, or the line number of the system log message. This
helps the support team locate the cause of the error.
In this context a program is an independent component at the
operating system level.
==============================================================
Can you please let me know how to proceed.
Best Regards,
Pratyusha.Pratyusha
RSUSR003 displays logon system settings and checks passwords of SAP*, DDIC, SAPCPIC, EARLYWATCH (critical accounts).
This message appears in the system log when the report is run as Dialog or in Background and there is some violation that needs to be reviewed.
If run in background, there should be a spool to review.
If run in dialog, the output should be the same as the spool (with any possible differences from the time of the runs).
Hope this helps.
PJ -
I want to cancel my account. I purchased a product that had errors in it. Within minutes I tried to cancel the purchase, and Acrobat will not let me. Furthermore, there are security errors in my account that are unacceptable. Please cancel my account, my payments. I have called my bank and reported this as fraud.
Kmrnyu, the order placed by you is still under transaction, the order stands canceled.
As soon as the order is complete I shall get it canceled & refunded.
Regarding the account, do you want it to cancel the account? Please confirm.
Regards
Rajshree -
Oracle Reports Security Settings???
I am attempting to display Oracle Reports that are on a report server on a portal.
I look here and it tells me to set up the report server info on the portal...which makes sense...
http://www.contratos.gov.co/portalHelp/ohw/state/content/locale.en/vtTopicFile.rpthelp_cs_hs_en%7Crptsvr~htm/navId.3/navSetId._/
But I go to the administration tab in portal builder, and there is no Oracle Reports Security Settings option. Anyone know why???
Need info asap...Thanks!Please refer to duplicate thread on the same topic at
error getting value from collection to a date picker field
Maybe you are looking for
-
Error while migrating from ms access 2003 db to oracle 10g in sqldeveloper
Hello, i am working on migration project from MS access 2003 to Oracle 10g on windows XP sp2 plateform using SQL developer. it went quit smoothly till the "capture microsoft access" .so in this step the sql developer opens the access db in background
-
Creative "Tasks" and "Contacts" X-FI
How in the world do you put your contacts on Creative X-FI There is no help on it, I followed a link on this forum and got: Fatal error: Call to undefined function: message_die() in /data/v-clients/nomad/db/db.php on line 88 No where does the Creativ
-
Osx 10.7 incompatibility
Is there going to be any update to Mac Labview for Mac OSX 10.7. NI-VISA 5.0.0 does not install on 64 bit OS and most of Labview quits expectedly running some VIs I have Labview 2010, 32 bit installed Most of the Arduino VIs also cause unexpected qui
-
Outlook PRF file settings for Exchange 2013 environment
Hi Team, Client - Outlook 2007 Existing environment - exchange 2007 New environment - exchange 2013 Recently migration of exchange 2007 to exchange 2013 happened in our environment subsequently some users mailboxes are moved from exchange 2007 to exc
-
Anyone using pyxis service? They ask for our shared secret
The pyxis reporting system offers enhance analysis of iTunes U reports but because they ask for our shared secret and debug address, I have to ask around to see what others think of this. Is anyone using it? What is your experience with it? Are th