XL Reporter UDF Problem

Hi guys,
I already run XL Reporter and check the UDF that i want to use in creating the reports but the UDF does not appear in the Report Composer. I am using B1 SP01 PL04. I hope anyone can help me on this.
Regards,
Michael

Did you already search the forum ? there are plenty of answers about XLR + UDF.
For instance
How to display UDT/UDF in XL Reporter

Similar Messages

Dear Apple Support, Good day to you. This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1.. After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to resto

Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>

1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working?

How can I report a problem with downloading?

I purchased a rather long album and halfway through downloading it gave me the message, "We could not complete your istore request. The network connection timed out. Error 8003." The only guidance it offers is to check the network connection. Nothing wrong there. Now I can get into the store and the balance of the album no longer shows up under downloads, just old stuff that really shouldn't even be there. I went into my account, and under purchase history clicked onto "Report a problem." All I got out of that is the same page minus the report a problem button.
I'm frankly sick of this iphone and all the problems I've encountered with their upgrade failures, but this disappearig report a problem just tells me they really don't want to hear from you and no one is minding the store.
Any other places to report a problem? Or advice onto how to get the missing songs?
Thanks., I've just spent the last 1-1/2 hours on this board and going back and forth in the istore and am very frustrated.

Click here and fill out the form for assistance.
(35548)

HT5429 How long after you report a problem does it take for the fix to be picked up in maps?

How long after you report a problem does it take for the fix to be picked up in maps? The street I live on is misspelled. It's shown as one word, but it should be two words. Maps cannot find the address when it is spelled correctly, so I have it purposely misspelled it as one word in my contacts, which helps for the most part, however it still tries to place my home on an entirely different street all together. Fortunately this new random street is at least close to where I live. When I used to spell my street correctly with two words, maps would try to send me to the next town over. So it kind of works, as long as I misspell my street, and ignore the fact that it is showing where I live to be a couple of streets down from where I actually live. I live in Connecticut - not in the most populated of areas, but not in the middle of nowhere either. Amazingly enough Google Maps will correctly find my address whether it's spelled with one words or two words. Google Maps also shows my apartment complex, which Apple Maps does not. I really wish Apple would just do a quick pass of the area to fix these issues. I’ve reported the problem several times, months ago. How long will it take for there to be a fix? I keep trying to use the Apple ecosystem, but Google is clearly the better solution for me.

Apple does not do the GIS data for maps. That comes from 3rd party vendors like Tom Tom. I have read it takes some time to update map data. The only thing you can do is report it.
Not to belittle your complaint, but on my end it is Apple that is clearly better. When looking at my house in Google, the satellite photo is more than 4 years old, and the Apple one is much newer. I can tell because of the condition of my home and the neighbor's. They had an above ground pool which was removed 4 years ago and it shows on the Google Map. I had remodeling and roof work done to my home that started 3 years ago and Apple's satellite view showed this work done, which took over a year to complete. I live in the middle of a block in a rural town. Both Apple and Google split the block into 100 parts and put my home close to the beginning of the block instead of where it actually sits. I've reported it to both Google and Apple and no one has changed. Just one of those things. But, keep your chin up, it will get corrected eventually.

Sub Report Performance problem

Our current software configuration is Microsoft SQL Server 2008 R2 (10.0.2531.0) where our data is housed. Our User Interface is Microsoft Visual Studio 2008 (Visual Basic) and Microsoft .NET 3.5 SP1 platform. We use Crystal Reports 2008 (12.0.0.683) to do our reporting.
We upgraded from Crystal Reports XI and our reports are taking a long time to render?... Is there any evidence of other companies experiencing this trouble? Are there any degraded performance issues when moving from XI to 2008?
In some cases we utilizing a small simple sub report.
Any help appreciated. Thanks.

Hi Billy,
Subreports in detail sections are never a good idea. Example, you have 100 records returned int he main report and if that field is your subreport link it causes the subreport to run 100 times. Your database is being queried 101 times.
Also, the default time out for database is typically 1 minute, could be you need to verify your report and database so CR can "clean up" any wrong pointers.
It's always better to do the data collection server side if and when possible, after all that's what they do best.
Not much detail to go on so I can't say if it's a report design problem other than the above or not. It could be also that .NET takes time to load all of the CR assemblies so depending on how you have your app configured depends on the delay. If you load a dummy report when your starts up to pre-load CR runtime then subsequent reports will be much faster.
Also check off all of the Verify Database options, you may be telling CR to verify each time which on big databases can cause a delay also.
Thank you
Don

Interactive report performance problem over database link - Oracle Gateway

Hello all;
This is regarding a thread Interactive report performance problem over database link that was posted by Samo.
The issue that I am facing is when I use Oracle function like (apex_item.check_box) the query slow down by 45 seconds.
query like this: (due to sensitivity issue, I can not disclose real table name)
SELECT apex_item.checkbox(1,b.col3)
, a.col1
, a.col2
FROM table_one a
, table_two b
WHERE a.col3 = 12345
AND a.col4 = 100
AND b.col5 = a.col5
table_one and table_two are remote tables (non-oracle) which are connected using Oracle Gateway.
Now if I run above queries without apex_item.checkbox function the query return or response is less than a second but if I have apex_item.checkbox then the query run more than 30 seconds. I have resolved the issues by creating a collection but it’s not a good practice.
I would like to get ideas from people how to resolve or speed-up the query?
Any idea how to use sub-factoring for the above scenario? Or others method (creating view or materialized view are not an option).
Thank you.
Shaun S.

Hi Shaun
Okay, I have a million questions (could you tell me if both tables are from the same remote source, it looks like they're possibly not?), but let's just try some things first.
By now you should understand the idea of what I termed 'sub-factoring' in a previous post. This is to do with using the WITH blah AS (SELECT... syntax. Now in most circumstances this 'materialises' the results of the inner select statement. This means that we 'get' the results then do something with them afterwards. It's a handy trick when dealing with remote sites as sometimes you want the remote database to do the work. The reason that I ask you to use the MATERIALIZE hint for testing is just to force this, in 99.99% of cases this can be removed later. Using the WITH statement is also handled differently to inline view like SELECT * FROM (SELECT... but the same result can be mimicked with a NO_MERGE hint.
Looking at your case I would be interested to see what the explain plan and results would be for something like the following two statements (sorry - you're going have to check them, it's late!)
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two),
sourceqry AS
(SELECT b.col3 x
       , a.col1 y
       , a.col2 z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5)
SELECT apex_item.checkbox(1,x), y , z
FROM sourceqry
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two)
SELECT apex_item.checkbox(1,x), y , z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5If the remote tables are at the same site, then you should have the same results. If they aren't you should get the same results but different to the original query.
We aren't being told the real cardinality of the inners select here so the explain plan is distorted (this is normal for queries on remote and especially non-oracle sites). This hinders tuning normally but I don't think this is your problem at all. How many distinct values do you normally get of the column aliased 'x' and how many rows are normally returned in total? Also how are you testing response times, in APEX, SQL Developer, Toad SQLplus etc?
Sorry for all the questions but it helps to answer the question, if I can.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)

Report generation problems on the WinNT target machine

I'm using report generation VI's to generate a standard report, mixed with text and graphs.
In development mode (LV 6.0.2; Win-NT 4.0 SP6)there are no problems to print it. As soon as I make an application (application builder 6.0) and transfer it to the target machine (Win-NT 4.0 SP6; run time engine 6.0.2) I get an error -2147352567 unable to load picture..to Append front panel image to report.vi> If I delete the VI "Append front panel image to report.vi", I can print the text of my report without problems. Do you have any idea?

I could fix the bug in the meantime. I had installed an older version of the Internet Explorer. When I updated the target PC to Internet Explorer Vers. 5.5, there are no problems anymore. I think it must be a problem of ActivX.

Report a problem form does not pop up

My 5 year old bought $80 of stuff with an In App purchase in error yesterday. I tried to use the REport a problem link. But all that pops up is a webpage:
http://www.apple.com/ca/support/itunes/
When I click 'Report a problem'
How do I get it cancelled, the link does not work.

I can confirm that report a problem sends me nowhere when I click it. Funny how when it comes to reporting that it doesn't work

Report a problem is not working on Windows 64 bit

I just downloaded the latest 10.5.3.3 version of ITunes for 64 bit windows. When I go to my purchase history, and click "Report a Problem" it just fires up the browser with the Apple Support page. http://www.apple.com/support/itunes/

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue with your purchase to the iTunes Store.
Regards.

'Report a Problem' is not working at all on my iMac. What do I do?

I'm running Mac OS X Version 10.5.8, 3.06GHz Intel Core 2 Duo, etc...
I have not been able to use the Problem Report interface for over a month.
No matter what software the problem is with, no matter how strong my internet connection is, I get a dialog saying "Submission failed: Your report could not be submitted. Please try again later." For example, here's a screencap from 1 minute ago, after Spotify crashed.
The same thing happens with Apple software as well as third-party. I have no idea what to do.
Any help will be much appreciated.
-S.

StefanoBlack wrote:
None of this is the point though. I don't care about reporting the problems, I wanna know why my computer is having errors rendering a very basic function impossible. Hard drive problem, data corruption, mystery Mac virus...my concern is that this is a symptom of something bigger.
That's good to know, but keep in mind that your original posting complained solely about "Report a problem not working." That was the issue in the title and text of your original post. Several people responded with regards to that concern that you raised, and indicated that not being able to report back to Apple was not a serious concern, we don't think Apple is using that data much and may have turned off some of the reporting paths back to the company anyway. As Pondini said, if you are really concerned about some other problem, describe it so people here might address it. You mention "Hard drive problem, data corruption, mystery Mac virus ..." but provide no details except that the report back to Apple failed, about something. A report back to Apple failing to go through is not evidence of any of those things you mentioned, it's actually seen pretty often.

Report a Problem is not working

Accidentally a 6 years old boy installed a paid game and i want a refund .
i tried to report a problem but when itunes links me with browser to loging so i can report aproblem after i sing in this message appears "The page you're looking for can't be found."
anyone can tell me if there is another way i can do it?
thanks

To report a problem less than 90 days:
http://reportaproblem.apple.com
Sign in with the AppleID and Password used for the purchase.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
To report a problem greater than 90 days:
http://www.apple.com/support/itunes/store
Also, you may want to look at using Restrictions (Parental controls)
iOS Restrictions:
http://support.apple.com/kb/HT4213
iTunes: Parental Controls:
http://support.apple.com/kb/HT1904
Mac App Store Parental Controls:
http://support.apple.com/kb/PH11496
Mac OS X: Parental Controls (video)
http://support.apple.com/kb/VI28

REPORT A PROBLEM link does not work

I received an email with an invoice for a purchase of 5 apps that I DID NOT PURCHASE. IT'S ALL IN CHINESE AND I DON'T EVEN KNOW HOW TO READ CHINESE. After following a tutorial on how to report a problem, i clicked on that link 'report a problem' next to the apps the thief purchased BUT IT BOUNCES ME BACK TO THE ITUNES SUPPORT PAGE. Unlike the tutorial, it did not bounce me to the 'select your problem' page. I want to report this problem so that I may get a refund on those apps i did not buy ( and do not even have on my ipod! ). Please help me.

I can confirm that report a problem sends me nowhere when I click it. Funny how when it comes to reporting that it doesn't work

Hi Expert , crystal report export problem. system not responding

Hi,
crystal report export problem. system not responding.
Thanks
Rajkumar Gupta

Dear Raj,
Please try this
          Try
            Dim oSubReport As CrystalDecisions.CrystalReports.Engine.SubreportObject
            Dim rptSubReportDoc As CrystalDecisions.CrystalReports.Engine.ReportDocument
            Dim rptView As New CrystalDecisions.Windows.Forms.CrystalReportViewer
            Dim rptPath As String = System.Windows.Forms.Application.StartupPath & "\" & rptName
            Dim rptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
            rptDoc.Load(rptPath)
            rptView.ShowExportButton = True
            rptView.ReportSource = rptDoc
            For Each oMainReportTable As CrystalDecisions.CrystalReports.Engine.Table In rptDoc.Database.Tables
                oMainReportTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
            Next
            For Each rptSection As CrystalDecisions.CrystalReports.Engine.Section In rptDoc.ReportDefinition.Sections
                For Each rptObject As CrystalDecisions.CrystalReports.Engine.ReportObject In rptSection.ReportObjects
                    If rptObject.Kind = CrystalDecisions.Shared.ReportObjectKind.SubreportObject Then
                        oSubReport = rptObject
                        rptSubReportDoc = oSubReport.OpenSubreport(oSubReport.SubreportName)
                        For Each oSubTable As CrystalDecisions.CrystalReports.Engine.Table In rptSubReportDoc.Database.Tables
                            oSubTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
                        Next
                    End If
                Next
            Next
            'Setting Paper
            Dim rawKind As Integer = 0
            Dim printSet As New System.Drawing.Printing.PrinterSettings
            For i As Integer = 0 To printSet.PaperSizes.Count - 1
                If printSet.PaperSizes.Item(i).PaperName.ToUpper = PaperName.ToUpper Then
                    rawKind = CInt(printSet.PaperSizes.Item(i).RawKind)
                    Exit For
                End If
            Next
            Dim MyTest As New SaveFileDialog
            rptDoc.PrintOptions.PaperSize = CType(rawKind, CrystalDecisions.Shared.PaperSize)
            rptDoc.ExportToStream(ExportFormatType.Excel)
            'rptDoc.SaveAs("C:\TBKING.xls", True)
            '''How to export the report
            Try
                Dim CrExportOptions As ExportOptions
                Dim CrDiskFileDestinationOptions As New _
                DiskFileDestinationOptions()
                Dim rename As String
                rename = rptName.Replace(".rpt", "")
                Dim CrFormatTypeOptions As New ExcelFormatOptions
                CrDiskFileDestinationOptions.DiskFileName = _
                                            "c:\Report\" & rename & "_Export_File.xls"
                CrExportOptions = rptDoc.ExportOptions
                With CrExportOptions
                    .ExportDestinationType = ExportDestinationType.DiskFile
                    .ExportFormatType = ExportFormatType.Excel
                    .DestinationOptions = CrDiskFileDestinationOptions
                    .FormatOptions = CrFormatTypeOptions
                End With
                rptDoc.Export()
            Catch ex As Exception
                MsgBox(ex.ToString)
            End Try
            '' end by kevin shah
            rptView.Show()
            rptView.ShowExportButton = True
            Dim oFrm As New System.Windows.Forms.Form
            rptView.DisplayGroupTree = True
            rptView.Dock = System.Windows.Forms.DockStyle.Fill
            rptView.Location = New System.Drawing.Point(0, 0)
            oFrm.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
            oFrm.Controls.Add(rptView)
            oFrm.Name = "Report Viewer"
            oFrm.Text = "Report Viewer11"
            oFrm.ResumeLayout(True)
            oFrm.WindowState = System.Windows.Forms.FormWindowState.Maximized
            oFrm.TopMost = True
            oFrm.ShowDialog()
        Catch ex As Exception
            objMain.objApplication.MessageBox(ex.Message)
        End Try
By pressing this button XLS file be generated on C:\report\
Hope this will resolved the issue
Thanks
Kevin

BI Publisher report bursting problem

I am not able to make my report burst to separate files for ftp delivery. I am running BI Publisher version 10.1.3.4.1 (stand-alone). My data query looks like this:
select a.agency_id, b.borr_name
from agency_tbl a, borr_tbl b
where a.rpt_date >= 20100101 and a.rpt_date <= 20100110
and a.borr_id = b.borr_id
and a.agency_id in (80013,80019)
order by a.agency_id, b.borr_name
My bursting/delivery query looks like this:
select agency_id "KEY",
'mytemplate' as TEMPLATE,
'RTF' TEMPLATE_FORMAT,
'en-US' LOCALE,
'PDF' OUTPUT_FORMAT,
'FTP' DEL_CHANNEL,
'myserver' PARAMETER1,
'myid' PARAMETER2,
'mypwd' PARAMETER3,
'/home1/web-docs-443/files/pdffiles' PARAMETER4,
convert(varchar,agency_id) || '.pdf' PARAMETER5
from agency_tbl
where agency_id in (80013,80019)
and rpt_date >= 20100101 and rpt_date <= 20100110
(I have to put "KEY" in quotes because my database is sybase, and KEY is a reserved word.)
I have verified that both queries return data (6 records each, no null agency_id keys).
The goal is to create a file for each agency that lists their associated borrowers.
I can view the report without problems. But when I schedule the report and enable bursting, I get the "Job was failed" email notification, and the report history shows this:
Job Execution Information
History ID 218
Status Failed
Start Processing Time 3/21/11 10:27 AM
End Processing Time 3/21/11 10:27 AM
Time Elapsed 1.68 sec
System Message oracle.apps.xdo.servlet.scheduler.ProcessingException: java.lang.NullPointerException
     at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.java:2116)
     at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:358)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
Caused by: java.lang.NullPointerException
     at com.sun.java.util.collections.Hashtable.containsKey(Hashtable.java:300)
     at oracle.apps.xdo.batch.bursting.DeliveryXMLParser.processRow(Unknown Source)
     at oracle.apps.xdo.batch.bursting.DeliveryXMLParser.endDeliveryInfoElement(Unknown Source)
     at oracle.apps.xdo.batch.bursting.DeliveryXMLParser.endElement(Unknown Source)
     at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:210)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1318)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:263)
     at oracle.apps.xdo.batch.bursting.DeliveryXMLParser.getDeliveryChannels(Unknown Source)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.createEnterpriseReportRequest(Unknown Source)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.setDeliveryControlFile(Unknown Source)
     at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.java:1916)
     ... 3 more
Bursting Definitions
Bursting Node /ROWSET/ROW/agency_id
Delivery Node /ROWSET/ROW/agency_id
Any help will be greatly appreciated. This has me stumped . . . I am out of ideas.

What caused our bursting problem:
We had to put the word "KEY" in quotes (in our bursting query), because KEY is a reserved word in sybase. But putting it in quotes caused a problem - the results of the bursting query did not contain a "KEY" tag.
. . . And the solution:
We added the connection property "GET_COLUMN_LABEL_FOR_NAME=true" to our sybase datasource definition. Many thanks to Tim Dexter, and to Paul from the sybase forums (http://newsgroupstats.info/article/forums.sybase.com/sybase.public.jconnect/2308/Column-aliases-not-working.html) c. 2007.
And thanks again to Jorge for the helpful suggestion.
Steve Z.

I purchased an in-app component but it has not downloaded and I cannot seem to contact the seller. I've tried to report a problem but no window opens in which to report the problem. Any ideas?

I purchased in in-app component for an email program but it has not shown up in the app on my ipad. I tried to report a problem, but no window opens in which to explain my situation. How do I get a message to the seller or to itunes? I am reluctant to re-purchase the component.

Can you download large files from other places apart from the App store, wondering if it is the App store or your internet connection.
If it just the app store check this url http://www.apple.com/support/mac/app-store/contact/

XL Reporter UDF Problem

Similar Messages

Maybe you are looking for