XMII and Rockwell Products

Hi All
Can anybody tell me what are the Rockwell products which can be integrated to xMII or SAP. And How (connector used etc )exactly they Integrate with SAP xMII .
I have seen the Rockwell site but havent got much info on integration.
Regards

Use FactoryTalk Gateway and the MII OPC UDS (version 4.0) and you can access all of the data sources you've asked about (Linx, FactoryTalk, and RS/View). You'll need to check with Rockwell regarding version compatibility of the FactoryTalk Gateway and older versions of Linx/RSView.

Similar Messages

XMII and Barcoding Equipment

I am an xMII novice and we have started to architect a manufacturing solution that will utilize xMII's capabilities integrated with a back end SAP R/3 (v. 4.6C) instance. I have a few questions that I would like to pose to the group to assist us on our way.
1. I would think that xMII should have no issues receiving information from barcode scanning devices (e.g. for shop floor confirmations), but have not heard of anyone using such devices directly interfaced with xMII. Could someone confirm (hopefully from experience)? Are there specific vendors who's devices are more readily interfaced with xMII than others?
2. Provided that it is feasible to interface barcode scanning devices directly with xMII, what is the better mechanism for shop floor confirmation:
Scanner --> xMII --> R/3?
Scanner --> R/3 --> xMII?
Other?
I would think that either mechanism is sound, however I wanted to solicit some opinions to find out if there is a better way.
3. Has anyone interfaced xMII with barcode printing devices, so that activities within xMII could generate barcoded labels? Or is this process better facilitated out of R/3? For example, production confirmation generating a barcoded label for the produced goods.
Thanks.
Dave

Hi David - Great set of questions.
xMII and Barcoding work well together, probably to some extent because there isn't a direct connection between them. xMII runs in a web browser. The scanning device is typically responsible for scanning the barcode and transforming the image into text. It is also, usually, responsible for sending that text back to the computer it is connected to. The computer then simply takes the passed text and inserts it wherever the cursor is. So the if xMII is the active window and the cursor is in a position where you want the translated barcode to show up, it will. If it doesn't the problem is either with the device or the computer. On some models of scanners, you can even program it to simulate a keystroke before or after each scan. So, for instance if you have a web page with one text field for the barcode and a submit button, you can have the scanner enter the text in the field AND hit the submit button in one scan.
For your #2 question, both scenarios would work. If you are using a barcode device with a GUI on it like Windows CE or palm, you'll probably be interfacing between the barcode and R/3 with xMII so in that instance, send the barcode to an xMII page that does something in R/3.
Printing is a little tricky. Because xMII lives in a web browser on the client, you'll have to rely on the browser's printing capabilities. However, this is another method to printing barcodes. There are barcode printing packages available; I'm mostly familiar with Seagull's BarTender software. What you can do with this is use xMII to send a flat file containing the barcode label information (material, qty, etc) along with a printer name and user,etc to a windows directory that BarTender is "listening" to. Once BarTender sees the file, it will parse it and print the label with the information in the file to the printer in the file. It works really well.

Tcode for planned production and actual production

Hello,
I am working with a report I want to check the values with R/3 for Planned Production and Actual production. Does anybody have any idea how to check?
Thanks in advance

Hey Suman,
i have the same problem, did you find a solution?
thanks

I downloaded and installed Production Premuim CS5 on my computer and when I try to open it out of the applications folder it bounces at the bottom and then disappears.

I downloaded and installed Production Premuim CS5 on my computer and when I try to open it out of the applications folder it bounces at the bottom and then disappears. Does anyone know why this is? I've tried everything to open them but they will not open. Does anyone else have this problem?

I have a mac osx version 10.9.2. I used to have the student version of creative cloud cs6 earlier this year. I cancelled my subscription several months ago and bought cs5 two weeks ago. I never had any problems with the cloud. I went through the entire download process for CS5, and they all showed up in my applications folder and appeared to have downloaded but every time I try to open them they bounce around next to the application manager icon and then disappear.

Java API's supported in the Jdeveloper, IAS, and RDBMS product components

If there are any technical errors or "mistatement of the facts" in this posting, please let me know about them ..
This article is being delivered in Draft form and may contain
errors. Please use the MetaLink "Feedback" button to advise
Oracle of any issues related to this article.
PURPOSE
This article describes the "Enterprise Java Beans" (EJB), "Java Server Pages"
(JSP) and servlets Application Programming Interfaces (API) supported by the
Oracle products, Jdeveloper, Internet Application Server (IAS) and the Oracle
RDBMS release 2 and release 3, also known as Version 8.1.6 and 8.1.7,
respectively.
SCOPE & APPLICATION
All parties interested in the Java API's supported by these products.
Java API's supported in the Jdeveloper, IAS, and RDBMS product components
JDEVELOPER
JDEVELOPER is Oracle's Java development tool designed for coding / development,
testing / debugging, and deployment of Java Applications to the IAS and
RDBMS platforms.
With the java software api's being in a constant state of evolution, each new
release of Jdeveloper adds support for the "then current" version of the java
software api's, if it does not already have it implemented.
JDEVELOPER SERVLET API JSP API EJB API
VERSION VERSION VERSION VERSION
3.2.X.X 2.2 1.1 1.1
3.1.X.X 2.1 1.0 1.0
NOTE :
Sun Microsystems and their advisory teams (Oracle is on it) is working on
"draft" specifications for the next version of all of these API's
EJB -------> http://java.sun.com/products/ejb/index.html
JSP -------> http://java.sun.com/products/jsp/index.html
Servlets --> http://java.sun.com/products/servlet/?frontpage-javaplatform
It is anticipated that future releases of Jdeveloper will continue to be
upgraded to include support for the next version of each api.
To obtain the latest information on Oracle's Internet Development Suite (IDS)
of tools, please review the "Internet Developer Suite" information located
on Oracle's technet web site at :
http://technet.oracle.com/products/index.htm
IAS
IAS is Oracle's next evolution of the web server and application server
product technology superceeding the Web Application Server (WAS) and Oracle
Application Server (OAS) product lines.
IAS SERVLET API JSP API EJB API EJE VERSION
VERSION VERSION VERSION VERSION SUPPORTED
9I(1.0.2) 2.2 1.1 1.1 817
8i(1.0.1-NT) 2.0 1.0 1.0 816
8i(1.0.0-UNIX) 2.0 1.0 1.0 816
The IAS product contains two Java Virtual Machines (JVM) within it's
architecture.
They are called :
1) APACHE JSERV servlet engine
2) ORACLE ENTERPRISE JAVA ENGINE (EJE)
APACHE JSERV servlet engine
The APACHE JSERV servlet engine is an EXISTING product licensed from the
apache group which supports the servlet api 2.0.ONLY.
The APACHE JSERV product does not support ANY JSP's unless the customer
installs a third party jsp engine.
The IAS 8i/9i which has the APACHE JSERV product embedded in it, comes with
Oracle's JSP engine (OJSP) already integrated into it. OJSP supports JSP's up
to the specific JSP engine version documented in the Oracle Universal
Installer (OUI) for the 8.1.7 RDBMS or the IAS products. It is also documented
in the product's release notes.
Oracle ENTERPRISE JAVA ENGINE (EJE)
The EJE formerly known as :
1) Oracle 8i Java Virtual Machine (JVM)
2) JSERVER component,
3) Aurora JVM
was originally releas ed in the RDBMS 8.1.5 database with jdk 1.1.6 based java
support.
The currently supported versions of the Oracle 8i RDBMS, versions 2 and 3,
also known as Version 8.1.6 and 8.1.7, respectively, provides a jdk 1.2.1
based java virtual machine support.
"EJE" Version 816
This EJE, found in rdbms 8.1.6 and IAS 8i, contains support for the ejb
api 1.0, corba, and java stored procedures.
"EJE" Version 817
This EJE, found in rdbms 8.1.7 and IAS 9i, contains support for the ejb,
corba, and java stored procedures as well as the Oracle Servlet Engine (OSE)
which provides support for the servlets 2.2 api and JSP 1.1 api.
Note :
EJB support in the "EJE" Version 817 has been upgraded to comply with the EJB
1.1 api specification which includes "entity beans" support.
What is the bottom line ??
1) Servlets deployed to the APACHE JSERV must comply with servlet api 2.0.
2) Servlets 2.1 or higher are only supported in EJE's OSE component found in
the rdbms 817 or ias 9i products. Servlets api 2.0 can also run in the OSE.
References
1) "Oracle9i Application Server Technical White Paper" located at :
http://technet.oracle.com/products/ias/pdf/9ias_102.pdf
2) "Whats New? Oracle8i JVM Accelerator, Oracle Servlet Engine, OracleJSP ..."
located at :
http://technet.oracle.com/products/oracle8i/pdf/504.pdf
3) "Oracle8i Release 3 New Features Summary" located at :
http://technet.oracle.com/products/oracle8i/pdf/8iR3_nfs.pdf
null

which jvm is used by jserv ?? EJE or a separate jdk ?
The Jserv servlet engine is running in a separate jdk JVM external to the EJE jvm which is embedded within the "database" component of ias and the RDBMS.
See the reference below for more details ...
if jserv only support old apis, why it is in oracle's products ?
i would assume that the oracle servlet engine was under development when ias 8i was released and became available in time for the ias 9i and rdbms 817 products.
looking back in history leads me to believe ias 8i was a migration path to get to ias 9i or rdbms 817.
Based upon the long history of new releases of every oracle product being upgraded with new features, it's reasonable to assume that these products will continue to evolve.
when I deploy a jsp how to deploy in the right servlet container ("EJE") ?
as documented in the reference below, you can deploy JSP's to either the apache jserv jvm or the EJE since the ORACLE JSP engine functionality is in both jvm's.
there are many posts where you can see that people have deploy in jserv and they have problems because they don't use the right container (servlet 2.0 instead of
servlet 2.2) http://technet.oracle.com:89/ubb/Forum2/HTML/006349.html
when ias 8i came out this was clearly an issue since servlet support was at api 2.0, and the current servlet api was probably at 2.1.
oracle clearly made every effort to get ias 9i released quickly to supply a servlet 2.1 and 2.2 capable engine to resolve this issue.
since ias 9i and rdbms 8.1.7 are available this is no longer an issue.
The reference below explains the architecture and understanding it would eliminate a lot of "deploy to the wrong ias 9i component" issues.
so why jserv is bundled with oracle 8i/9ias since EJE support the right api version ?
if in ias 9i release , oracle had removed the jserv component without any advance warning, many customers would have been very upset since oracle makes every attempt to give advance notice before removal of functionality.
References
1) "Oracle9i Application Server Technical White Paper" located at :
http://technet.oracle.com/products/ias/pdf/9ias_102.pdf

A required application library failed to load and the product cannot continue

Seems like I go through this problem time and again with Photoshop + Acrobat CS2 and still have yet to resolve a way of fixing it short of completely wiping my drive and re-installing Windows (XP Pro) The error is "application library failed to load and the product cannot continue"
If there is anyone out there that has figured out a way to fix this issue please fill me in.
This time I went as far as a complete and though removal of all Adobe products from the system and the registry and then completely reinstalled the product.
I have forgone purchasing CS3 because of this issue as I am 99% sure that it has still not been resolved.
Basically Photoshop and Acrobat are useless at this point and I am using an old version of Picture Publisher and Macromedia Fireworks to complete my work. This I assume is good advertising for Adobe :)
Anyone have any ideas????
See this post in the forum "could not complete your request because of a program error", PDF format, cs2, xp" as this is an ongoing Adobe issue that they have completely blown off!
I am working on
Adobe Photoshop Version: 9.0.2 (9.0.2x296)
Operating System: Windows XP
Version: 5.1 Service Pack 2
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading
Physical processor count: 1
Processor speed: 2798 MHz
Built-in memory: 2559 MB
Free memory: 1812 MB
Memory available to Photoshop: 1758 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: XXXXXXXXXXXXXXXXXX (I have a legal copy)
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS2\
Temporary file path: C:\DOCUME~1\JIMSHE~1\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 128.0G, 65.5G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS2\Plug-Ins\
Additional Plug-ins folder: not set
Installed plug-ins:
ADM 3.10x21
ASDStrm 1.03x2
Accented Edges 9.0
Angled Strokes 9.0
Average 9.0 (9.0x196)
BMP 9.0 (9.0x196)
Bas Relief 9.0
Camera Raw 3.7
Chalk & Charcoal 9.0
Charcoal 9.0
Chrome 9.0
Cineon 9.0 (9.0x196)
Clouds 9.0 (9.0x196)
Color Halftone 9.0 (9.0x196)
Colored Pencil 9.0
CompuServe GIF 9.0 (9.0x196)
Conditional Mode Change 9.0 (9.0x196)
Contact Sheet II 9.0 (9.0x196)
Conté Crayon 9.0
Craquelure 9.0
Crop and Straighten Photos 9.0 (9.0x196)
Crop and Straighten Photos Filter 9.0 (9.0x196)
Crosshatch 9.0
Crystallize 9.0 (9.0x196)
Cutout 9.0
Dark Strokes 9.0
De-Interlace 9.0 (9.0x196)
Difference Clouds 9.0 (9.0x196)
Diffuse Glow 9.0
Displace 9.0 (9.0x196)
Dry Brush 9.0
Embed Watermark 1.70.19
Export Transparent Image 9.0 (9.0x196)
Extract 9.0 (9.0x196)
Extrude 9.0 (9.0x196)
FastCore Routines 9.0 (9.0x196)
Fibers 9.0 (9.0x196)
Film Grain 9.0
Filmstrip 9.0 (9.0x196)
Filter Gallery 9.0
Fit Image 9.0 (9.0x196)
Fresco 9.0
Generic EPS 9.0
Glass 9.0
Glowing Edges 9.0
Grain 9.0
Graphic Pen 9.0
HDRMergeAlign 9.0x001
HDRMergeUI 9.0x001
Halftone Pattern 9.0
Ink Outlines 9.0
Lens Blur 9.0
Lens Correction 9.0
Lens Flare 9.0 (9.0x196)
Lighting Effects 9.0 (9.0x196)
Liquify 9.0
MMXCore Routines 9.0.1 (9.0.1x289)
Merge to HDR 1.0x001
Mezzotint 9.0 (9.0x196)
Mosaic Tiles 9.0
Multiprocessor Support 9.0 (9.0x196)
NTSC Colors 9.0 (9.0x196)
Neon Glow 9.0
Note Paper 9.0
Ocean Ripple 9.0
OpenEXR 9.0 (9.0x196)
PCX 9.0 (9.0x196)
PNG 9.0 (9.0x196)
PNG Icons 1.22x1
Paint Daubs 9.0
Palette Knife 9.0
Patchwork 9.0
Paths to Illustrator 9.0 (9.0x196)
Pattern Maker 9.0 (9.0x196)
Photo CD 9.0 (9.0x196)
Photocopy 9.0
Photomerge 9.0 (9.0x196)
PhotomergeCylmap 9.0 (9.0x196)
PhotomergeRender 9.0 (9.0x196)
PhotomergeUI 9.0 (9.0x196)
Picture Package 9.0 (9.0x196)
Picture

John,
foud your message very helpfull. I experience the same problem when strating a CS2 program (Photoshop, Indesign,...) over a terminal server connection.
It's weird because starting more than one instance is possible (despite what's written in the article ) as long as the users have administrative rights. I've encountererd this problem because my daughter of 11 wants to use Photoshop now. I have a terminal server set up so the kids may experiment with their own desktops whithout the risk to screw it up and because I can access all my programs from wherever I want.
But as I found out now I must buy volume licensing instead of retail (even if it's for just one instance...)
Want to know if possible how "difficult" it was to change your retail to a volume licensed version? Did you have to pay the full amount again? Hope an upgrade exist from Creative Suite CS2 - retail to Creative suite CS3 - volume licensed for the same price as from retail to retail... Or am I hoping to much?
Kind regards and thanks for your info,
Patrick

Enabling Installation of CS3 and CS4 products that will not install on Windows 7 64Bit.

Adobe installers are not known for their helpful or forgiving ways & I have more than once had to reinstall Windows when installation of CS3 and CS4 products has failed with patently inscrutable errors.
The background to the current issue that I was attempting to install PS CS4 on a W7 system which already had CS CS3 installed. The CS4 installer threw up inscrutable messages indicating that the installation could not proceed and to contact Adobe (they are joking right ? Their phone & web support is notoriously UN-helpful).
After reading through threads suggesting that I uninstall CS3, apply CS3 and CS4 cleaning scripts I was in exactly same position I have found myself in on least 2 occasions with WinXP. By this time I couldn't event get CS CS3 to reinstall!
Then I decided to review the event log and found a number of installer events thrown up by the Adobe installers resembling "Error 1402. Could not open key: UNKNOWN\Components\xxxxxxxx".
I tracked down this very helpful solution which allowed me to change the registry permissions on the parent key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\ Components and propagate the new permissions down to the child keys.
http://www.okino.com/conv/changing_windows_registry_permissions.htm.
My advice is to follow instructions for "A More All-Encompassing Solution" and propagate the permissions right down to all the child keys as I could see a number of separate adobe installer errors in the event log. Also note the instruction to change the Owner from 'System' to 'Administrators' in Advanced settings. This is necessary in order for the Permissions change to be accepted and replace all the child object permissions.
As with most registry changes good advice to backup your registry hive first (although I didn't; by this time I was already expecting to have to reinstall Windows) and restart your system after making the registry changes before attempting to install / reinstall CS3 or CS4 products.
Hope this solution works as well for others as it did for me as the Adobe support on this issue has been next to useless.
[P.S. Q: Did you hear the joke about the guy who worked on product installation at Adobe rocking up at job interview with 'Adobe Installation Project Team' on his Resume? A: That that is the joke! If you wanted another job in installation development you would hardly admit to experience at Adobe ;)]

John Joslin wrote:
We don’t want people messing with the registry when they don’t need.
My apologies John I didn't realize that I was addressing the official custodian of Photoshop.
Incidentally my advice is intended for others in a similar situation who find themselves stalled during installation and otherwise contemplating a re-installation of Windows. I believe this would be obvious to most forum participants who had actually read my original post.

SQVI Report for SAP CRM Product Hierarchy and its Product

Hi
How to create a SQVI report for generating a list for SAP CRM Product Hierarchy which should show the outputs->Level 1, level 2, level 3 and level 4 categories and its products?
I tried COMM_Hierarchy table and Comm_product but not able to achieve this requirement.
or Is there any chance of getting related tables so that I could try more for this requirement.
In which table both product id and its category Id can be found?
Pravin

Thanks DJ
Is there any possibility to get a report for product hierarchy in SQVI ?
say in SAP CRM system, the product category is maintained in COMM_HIERARCHY as
Parent category Id->
                                Level2 Category Id->
                                                                 Level 3 Category Id->
Level 4 category Id ->
Product Id's
(I understood the link between Level 4 category id and product id with your info.) but not able to achieve the requirement fully.
Is there any possiblity to achive for generateing a report?

CRS 10.1 with Endeca 3.1.1 -home page doesn't show image and promo products

Thanks to this forum and especially cmore I'm close to setting up my local dev environment, but still have something to resolve.
I have ATG 10.1.2 + CRS + Endeca 3.1.1. I installed BCC with Staging and Production (switchable) stores.
The problem is with Production CRS - both US Store and Home Store don't show image and promoted products on Home page.
What I see below Top Category pane is empty square. Unlike Production, home page on Stage works fine - I see homepage_promo_storeSiteUS_en_anonymous.png and promoted products.
I think the problem is not related to Endeca, as I currently connect both Stage and Prod to the same Endeca CRS, I also believe that issue is not related to configuration - I tried to run production with Stage configuration, and it changed nothing. I believe the issue is somewhere in data (DB) - but I did full deployment for Prod and it didn't help. I verified targeters and slots on Prod through ACC, and they looks fine. So don't know at this point what to do next.
While doing full deploy I see some errors in the log which might be related to the issue, But the same errors I see on Stage as well and still Stage works without issues:
10:17:41,805 ERROR [nucleusNamespace.] Invalid attempt to resolve component /atg/registry/Slots/HomeTheme in scope global. It is defined in scope request
10:17:41,811 ERROR [nucleusNamespace.] Invalid attempt to resolve component /atg/registry/Slots/PromotedProduct1 in scope global. It is defined in scope request
10:17:41,816 ERROR [nucleusNamespace.] Invalid attempt to resolve component /atg/registry/Slots/PromotedProduct2 in scope global. It is defined in scope request
10:17:41,819 ERROR [nucleusNamespace.] Invalid attempt to resolve component /atg/registry/Slots/PromotedProduct3 in scope global. It is defined in scope request
10:17:41,822 ERROR [nucleusNamespace.] Invalid attempt to resolve component /atg/registry/Slots/FeaturedProduct2 in scope global. It is defined in scope request
10:17:41,826 ERROR [nucleusNamespace.] Invalid attempt to resolve component /atg/registry/Slots/FeaturedProduct3 in scope global. It is defined in scope request
10:17:41,829 ERROR [nucleusNamespace.] Invalid attempt to resolve component /atg/registry/Slots/FeaturedProduct4 in scope global. It is defined in scope request
10:17:41,832 ERROR [nucleusNamespace.] Invalid attempt to resolve component /atg/registry/Slots/FeaturedProduct5 in scope global. It is defined in scope request
10:17:41,836 ERROR [nucleusNamespace.] Invalid attempt to resolve component /atg/registry/Slots/FeaturedProduct1 in scope global. It is defined in scope request
10:17:41,839 ERROR [nucleusNamespace.] Invalid attempt to resolve component /atg/registry/Slots/CategoryPromotionContent2 in scope global. It is defined in scope request
10:17:41,842 ERROR [nucleusNamespace.] Invalid attempt to resolve component /atg/registry/Slots/CategoryPromotionContent1 in scope global. It is defined in scope request
Last update: I compared Stage and Prod home pages HTML code, and notice that the first difference between two pages is absence of endeca-slot Div, the below code present on Stage, and is Not present on Prod:
It is the first difference only , there are a bunch more.
<div class="endeca-slot" zone="/content/Shared/Global Search Configuration/Search Box">
<script type="text/javascript">
if(Endeca.Site) {
Endeca.Site.Audit.contents["/content/Shared/Global Search Configuration/Search Box"] = [{"@type":"SearchBox","endeca.internal.created.by":"admin","rule.msg":"Fired","endeca.internal.last.modified.by":"admin","rule.msgcode":"13","rule.state":"fired","endeca.internal.resource.path":"\/sites-live\/NYCoCRS\/content\/Shared\/Global Search Configuration\/Search Box\/Search Box","endeca.internal.workflow.state":"ACTIVE","type":"DGraph.MerchDebug","Title":"Search Box","rule.id":"1","endeca.internal.last.modified":"2013-03-20T11:43","endeca.internal.date.created":"2013-03-20T11:43","Zone":"\/content\/Shared\/Global Search Configuration\/Search Box"}
</script>
Edited by: PKU on Apr 1, 2013 8:32 AM
Edited by: PKU on Apr 1, 2013 8:35 AM

After some analysis and experiments:
Most likely the issue is with Scenarios. HomeTheme Slot is populated by Theme scenario.
For some reason the slot remains empty on "bad" environment. On "good" environment the slot contain promo content item after the first call of the slot. I checked respective targeter and promo content item, and they look OK, so I believe something wrong with Scenarios.

Leopard and Adobe CS3 Products. Design and Video Production a must read.

Adobe posted this pdf. http://www.adobe.com/support/products/pdfs/leopardsupport.pdf
Should answer any questions on compatibility.
Web designers are safe if you use CS3. Studio 8, your out of luck.
InDesign CS3, Photoshop CS3, Illustrator CS3 is safe. CS2 your out of luck.
After Effects CS3 must use update.....slated for December.
Acrobat Pro 8, and any of Adobe video and sound production apps the same as After Effects.
Regards,
Ed

Hello,
Thank you very much for the answers, but for me it is already to late. I tried to install Tiger again, to be able to install Adobe Photoshop CS3 and then upgrade, but my iMac won't boot from the Tiger DVD even though it starts from the Leopard DVD. I have no glue what I am doing wrong. I pressed the "D" key during the boot - as stated in my manual and nothing happens. The machine just start Leopard from hard drive again.
I also tried to insert the Tiger DVD while Leopard is running and then choose the Tiger installer, but it tells me, that it can not install on my machine. I do not understand anything.
As far as I understand from Adobe, there should not be any problem to install Adobe Photoshop CS3. Nevertheless it definitely does not install on my machine (only the "shared components").
Kind regards,
Cornelia
Message was edited by: Cornelia Menzel
Message was edited by: Cornelia Menzel

Photo strip type gallery of next and previous products in my catalogue

Hello, I would like to add a photo strip type gallery of next and previous products in my catalogue and have this function on my large product layout page. It would be like the poplet images except they woud be images of the next product in the catalogue. Does anyone know if this is possible? Thanks

Hi there, are you looking for something like this?
http://kiyuco.com/tutorials/create-product-detail-page-pagination

How to use the rescue and recovery, and the product recovery discs ?

Hi everyone,
I've just recently became a new owner of a T61, and really enjoying it. I haven't had a chance yet to test-drive the lenovo phone support, as I have not yet screwed anything up that bad that required their help. I did try a clean factory reinstall from the service partition and it worked great. I would like to find out, how does one use the rescue and recovery startup disc, and the product recovery discs that I created myself? From my previous experience with Dell and HP, I only had to insert the first one and restart the computer, and the rest followed. But with ThinkPads, if I ever wanted to bring it to a clean factory state using those discs, do I use rescue and recovery first, followed by the product recovery? I'm curious, what is the difference between the two?
T61 (7658CTO), T9300, 3GB, 250GB, XP Pro
Solved!
Go to Solution.

blake_ibm wrote:
Hi! I'm blake
There is no diff between the two... One is on the Hard Drive and the other on CD/DVD.
Having the HDD version (pre-installed) is a good for trouble shooting. It uses a whole diff O/S on a whole diff partition (not C.
So if you are having problems and boot to RnR (via F11), and those problems go away. you know your issue is software related. If you still have the same problems probly Hardware related... IT IS AN EFFECTIVE WAY TO TAKE WINDOWS OUT OF THE PROBLEM.
Other then that. You can re-image another HDD from disks, you can't do that with the F11 version.
dose all that make sense?
Hi blake_ibm,
Thanks. All this makes perfect sense to me, but that's not what I'm asking for. My question is this: if I wanted to bring my notebook to its factory shipped condition using my recovery cd's, how do I do that? Do I insert cd1 first and then restart the notebook, or do I just insert it without restarting it, or perhaps I should use first the rescue and recovery?
You said that there is no difference between the two, but what two are you talking about man? I am not comparing cd recovery to partition recovery. I am talking about rescue and recovery cd, with system recovery cd's. These are the two things that I'm talking about.
I'm really grateful for all replies, but please people, read the question first !!!
I would really appreciate if someone could explain the steps involved in performing a clean factory recovery, using the cd's, and not the recovery partition. I just want to know for the future, in case one day I have to do it. That is all I'm asking.
T61 (7658CTO), T9300, 3GB, 250GB, XP Pro

Adobe Flash Player Active X and Plugin Product Codes

Where can I find a list of all the Adobe Flash Player Active X and Plugin product codes? I am creating an uninstall script to cleanup any old versions and would like a complete up to date listing.
This thread here has up to version 11.4 - http://forums.adobe.com/message/6048135#6048135
Thanks!

Hello,
Please refer to the MSI GUIDs tech note. This tech note is updated regularly with each release.
Maria

Why Apple don't fix half year serious problem with HD3000, Lion and Adobe products? Doesn't Apple really care about advanced users?

Why Apple don't fix half year serious problem with HD3000 drivers, Lion and Adobe products? Doesn't Apple really care about advanced users?
I have Mac mini and Macbook Pro 13". Bouth with HD3000. And I can't work at all. With Snow Lepard I had no problems. It's tiny problem in code. And such pain for lots of users!

If you have a problem with Adobe products, voice your issues with them.
It is the software developers responsibility to maintain compatability
with any operating system, beit OSX or Windows.

Installing cs3 master collection and cs5 production premium on windows 7 machine

I have a windows 7 ultimate machine that I would like to install CS3 Master Collection on. I would then like to upgrade the Production Premium programs to CS5.
I have the install discs for both. Any suggestions for how to go about doing this would be greatly appreciated.
Thanks!

Tahseen,
Thanks for the quick reply!
Both CS3 Master Collection and CS5 Production Premium are full installs, neither is an upgrade. I have serial numbers for both.
Machine previously had CS4 Production Premium installed on it, that has been uninstalled.
Should I install CS3 Master Collection then install CS5 Production Premium? If so, do I need to remove the CS3 versions of programs included in Production Premium before installing CS5 Production Premium?
Thanks again!

XMII and Rockwell Products

Similar Messages

Maybe you are looking for