XMII Content

Hi,
I am very new in xMII area and trying to setup the system from the dashboard side.
We have installed the xMII system successfully.
I wanted to know if there is any preconfigured package / application ( Like SAP PI/XI - we get content for SCM ) with dashboard in xMII which can be deployed and configure so it can connect to SAP R3 and start displaying different animatedobjects.
Is there any link where I can get list of deployable application for xMII
Thanks in advance
Lshriva
Edited by: Abesh Bhattacharjee on Feb 28, 2008 12:26 PM
Pls do not tag posts with "urgent" or "very urgent". Please read the rules of engagement before posting

Lshriva,
The following link might be helpful.
https://www.sdn.sap.com/irj/sdn/manufacturing-tools
Good luck,
Ajay.

Similar Messages

XMII content area not opening after Netweaver patch update.

Hi all,
Recently we upgrade Netweaver patches [few] from 7.3 SP7 to 7.3 SP9, after the patch update XMII is not show main content area, Header and links in the left panel are displayed but the main content area is blank.
Error Trace:
#2.0 #2014 07 14 13:32:16:540#+0300#Error#com.sap.xmii.Illuminator.gui.homepage.HomePageBuilder#
##sap.com/xapps~xmii~ear#C0000A365209024C00000001000031D8#111421450000000004#sap.com/xapps~xmii~ear#com.sap.xmii.Illuminator.gui.homepage.HomePageBuilder#96221#353##1FCB79F10B4211E4BC70000006A4280A#f37849690b4111e4afb7000006a4280a#f37849690b4111e4afb7000006a4280a#0#Thread[HTTP Worker [@2100786422],5,Dedicated_Application_Thread]#Plain##
Error transfering attributes org.w3c.dom.DOMException: INVALID_CHARACTER_ERR: An invalid or illegal XML character is specified. #
#2.0 #2014 07 14 13:32:31:063#+0300#Error#com.sap.xapps.mpm.interceptors.AuthorizationChecker#
#NONE#sap.com/xapps~mpm~ear#C0000A365209024D00000017000031D8#111421450000000004#sap.com/xapps~mpm~ear#com.sap.xapps.mpm.interceptors.AuthorizationChecker#96221#353#JTA Transaction : 57060#1FCB79F10B4211E4BC70000006A4280A#204e5c880b4211e4b3cb000006a4280a#204e5c880b4211e4b3cb000006a4280a#0#Thread[HTTP Worker [@15878578],5,Dedicated_Application_Thread]#Plain##
com.sap.xapps.oee.ejb.exception.OEELocalizedException: User 96221 does not have authorization to execute this service; user is trying to perform action read#
#2.0 #2014 07 14 13:32:31:063#+0300#Error#com.sap.xapps.mpm.interceptors.ExceptionHandlerInterceptor#
#NONE#sap.com/xapps~mpm~ear#C0000A365209024D00000019000031D8#111421450000000004#sap.com/xapps~mpm~ear#com.sap.xapps.mpm.interceptors.ExceptionHandlerInterceptor#96221#353#JTA Transaction : 57060#1FCB79F10B4211E4BC70000006A4280A#204e5c880b4211e4b3cb000006a4280a#204e5c880b4211e4b3cb000006a4280a#0#Thread[HTTP Worker [@15878578],5,Dedicated_Application_Thread]#Plain##
com.sap.xapps.oee.ejb.exception.OEELocalizedException: User <USER_ID>does not have authorization to execute this service; user is trying to perform action read#
#2.0 #2014 07 14 13:32:31:079#+0300#Error#com.sap.tc.webdynpro.model.ejb.model#
#BC-JAS-EJB#tc~cm~ejb~api#C0000A365209024D0000001B000031D8#111421450000000004#sap.com/xapps~mpm~ui#com.sap.tc.webdynpro.model.ejb.model#96221#353##1FCB79F10B4211E4BC70000006A4280A#204e5c880b4211e4b3cb000006a4280a#204e5c880b4211e4b3cb000006a4280a#0#Thread[HTTP Worker [@15878578],5,Dedicated_Application_Thread]#Plain##
execute
Component and version:
Component
Version
ADSSAP
1000.7.30.0.0.20101020230400
AJAX-RUNTIME
1000.7.30.9.19.20140618151600
BASETABLES
1000.7.30.9.1.20140217143400
BI-WDALV
1000.7.30.7.2.20120925175200
CFG_ZA
1000.7.30.7.1.20120710234700
CFG_ZA_CE
1000.7.30.7.0.20120312160300
CORE-TOOLS
1000.7.30.9.15.20140609162300
DI_CBS
1000.7.30.9.0.20130217111100
DI_CLIENTS
1000.7.30.7.2.20120808174400
DI_CMS
1000.7.30.9.0.20130217111100
DI_DTR
1000.7.30.9.1.20130429184500
ENGFACADE
1000.7.30.9.3.20130731225200
ENGINEAPI
1000.7.30.9.13.20140514195200
EP-BASIS-API
1000.7.30.9.3.20131203022700
ESI-UI
1000.7.30.7.1.20120419061400
ESP_FRAMEWORK
1000.7.30.7.3.20121022202400
ESREG-BASIC
1000.7.30.7.2.20130915212500
ESREG-SERVICES
1000.7.30.7.0.20120312224700
FRAMEWORK
1000.7.30.9.6.20140312211900
FRAMEWORK-EXT
1000.7.30.9.11.20140510042200
J2EE-APPS
1000.7.30.9.8.20140513152200
J2EE-FRMW
1000.7.30.9.20.20140702194800
JSPM
1000.7.30.7.1.20131029203300
LM-CORE
1000.7.30.9.10.20140702194800
LM-CTS
1000.7.30.7.5.20121018185000
LM-CTS-UI
1000.7.30.7.0.20120312160500
LM-MODEL-BASE
1000.7.30.7.0.20120312170300
LM-MODEL-NW
1000.7.30.7.0.20120312170300
LM-SLD
1000.7.30.7.3.20130822180000
LMCFG
1000.7.30.7.7.20130211235800
LMCTC
1000.7.30.7.5.20120823193700
LMNWABASICAPPS
1000.7.30.9.7.20140528172400
LMNWABASICCOMP
1000.7.30.7.1.20120501171100
LMNWABASICMBEAN
1000.7.30.7.2.20130509173200
LMNWACDP
1000.7.30.7.0.20120312170300
LMNWATOOLS
1000.7.30.7.0.20120313005500
LMNWAUIFRMRK
1000.7.30.7.3.20131028182100
MESSAGING
1000.7.30.9.31.20140616191000
MII_ADMIN
1000.14.0.4.2.20140310045511
ODATA-CXF-EXT
1000.7.30.8.3.20130619172700
OEE_MII
1000.1.0.2.0.20140110094411
SAP-XI3RDPARTY
1000.7.30.0.0.20101021060500
SAPMECORE
1000.6.1.4.14.201405091456
SAPMECTC
1000.6.1.4.2.20140513105149
SAPMEINT
1000.6.1.4.9.20140513105113
SAPMEINTCTC
1000.6.1.4.2.20140411083601
SAPMELEGACY
1000.6.1.4.14.201405091456
SAP_BUILDT
1000.7.30.9.0.20130217101400
SECURITY-EXT
1000.7.30.7.5.20121008182800
SERVERCORE
1000.7.30.9.31.20140702194800
SOAMONBASIC
1000.7.30.9.1.20130626201800
SR-UI
1000.7.30.7.0.20120313005400
UDDI
1000.7.30.7.0.20120312224700
UISAPUI5_JAVA
1000.7.30.9.19.20140130141100
UMEADMIN
1000.7.30.7.7.20130515172000
WD-ADOBE
1000.7.30.7.0.20120312164400
WD-APPS
1000.7.30.9.0.20130217123000
WD-RUNTIME
1000.7.30.9.22.20140609172000
WD-RUNTIME-EXT
1000.7.30.9.0.20130217123000
WSRM
1000.7.30.9.0.20130217140200
XMII
1000.14.0.4.3.20140314030733
Are we missing patch updates?
Has anyone faced this issue, any help would be highly appreciated.
Thanks,

Please see SAP Note 2040655 for this fix.
Regards, Steve

SAP xMII Content Generation Wizard login problem

Hi,
I installed content generation wizard.
after starting it ask login information.I used login information below:
Web Server: ServerName
username : administrator
password:xxxxxxxxxx
it does not accept and gives message below.
Error in credentials-Login unsuccessful.
Administrator password is correct.I tested it logins MII easyly.
How can i solve this problem?
Thanks.

Web Server : Host:Port
For Example: miisrv:50000

XMII and Multiple Thin Clients

Hi,
I am thinking of deploying multiple thin clients, each accessing a single xMII instance and am posting a general "broad" question. Although probably not an "xMII" related thread, but any others using xMII content on thin client(s)?
Any issues or pointers or suggestions or "not to do's" with content / java script / applets / performance / refresh?
Thanks all, Rgds Kevin.
Edited by: Kevin Hibbins on Apr 28, 2008 10:58 AM

A thin client is essentially a Web Browser, right? Or are you looking @ something else as well?
Just to add , this is from the MII help - "The following section provides a visual overview of the various applets provided with SAP xMII. By combining and linking these building blocks, incredibly powerful decision support applications that bridge a variety of disparate data sources can be quickly created and deployed on thin client platforms such as Web browser, personal digital assistants (PDAs), or other Web-aware mobile devices and internet appliances".
Help me understand if you have anything specific in mind when you say 'thin clients'.

EP for xMII12.0

Is EP must for xMII 12.0? I understand that 12.0 is on Netweaver stack but I am unaware of EP.
Regards

Hi Prasanna,
xMII 12.0 has its own portal. If you are developing web content and need to publish it, you could either use xMII's portal, or you could embed xMII content in EP.
Short answer is ... No, you do not need EP for xMII 12.0.
Hope this answers your question.
Cheers,
Jai.

How to set different navigation items for each content tab in xMII portal

Hi,
Scenario : I have added three content tabs in the xMII portal.
I want to change the items in the navigation tree when each of the content tabs are selected.
How is this possible?
Please help.

Vaishali,
The built-in navigation tree is not intended for this sort of thing, where just like with the tabs it is intended to provide role/user based content links.
You would be better off having your content tab link pass a criteria to the default target frame and allow a web page to give you the second level of dynamics. Your content tab links could be something quite simple like "Page.irpt?Tree=1", "Page.irpt?Tree=2", "Page.irpt?Tree=3" and your irpt page would receive the Tree property and you could react accordingly in your web page.
Regards,
Jeremy

Business content for SAP Manufacturing Integration & Intelligence (SAP xMII

Hi,
Our requirement is to extract data from SAP xMII into BW. Are there any pre-configured extractors available to extract data for OEE, Down time etc. Are there any standard cubes / reports available in BI content that can be installed?
Appreciate your inputs.
Thanks in advance.
Best Regards,
Meera

Thanks AHP for pointing out.
From BW help link as below
http://help.sap.com/saphelp_bw33/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
go to BI Content > Financials > Financial Accounting > Asset Asset Accounting
for Assets
go to BI Content > Financials > Controlling > Overhead Cost Controlling > Overhead orders
for Internal Orders
Hope this time it is fine.
Cheers
Anurag

Get_file_list to list content of UNIX directory

Hi all
I am trying to list the files in a UNIX directory using the get_file_list action. Not getting anything back, but action is not reporting error.
In the folder configuration box i have used all combinations of \ and / but none do anything. I can list files on our Mii server using
server\share but this is a windows machine.
I think i have a couple of options
1. get FTP set up on UNIX server and use the FTP_get_file_list action and move files to Mii server for processing.
2. get something like SAMBA set up on UNIX to allow windows style file sharing.
Any other ideas out there?

Hi Les,
Set the "Get_File_List_0" with the following parameters:
Folder: "web://PROJECT"
Mask: "*" for list all files
http://wbhelp.sap.com/manufacturing/xmii_120/en/44/7108DF9EA03ABEE10000000A155369/content.htm (for more details)
Or use a XMLQuery
server://XMII/Catalog?Mode=ListFolders&Folder=[Param.1]&Content-type=text/xml
[Param.1] = PROJECT
Hope this help.
Danilo Santos

XMII server specifications

Hello all,
SAP recommends the following specifications for the xMII server
1) RAID - 1 Disk (3 logical SATA Disks)
Question: Our normal standard is for a RAID 5 with three physical drives. Would this cause any issues?
On the 3 logical SATA Disks, does this mean 3 logical volumes are required?
2) Database size - 400 GB
Question: Is this the recommended capacity of the RAID set or is it the recommended size of just the database? We plan to do a small POC and this strikes me as being overkill. Is this quantity correct?
Any help would be appreciated.

Jawahar - Please watch your versions. This is the second forum post that you have included this hyperlink to an old SDN document that was for version 11.5, not version 12.0. Even though the application content and connectivity is largely the same the entire web application server and underlying architecture has been ported from a file system based Microsoft IIS / NewAtlanta ServletExec to the database system running on NetWeaver WebAS 2004s SP10+. The specs listed in Joe's document are quite outdated.
Srinivasan - the application content and complexity that you implement and the number of users accessing the system should still be your guide for any sort of sizing. Since xMII version 12.0 is now an application deployed onto the WebAS Java stack you should use the NetWeaver sizing tool for the hardware recommendations and then include RAM allocations and possible clustering considerations that are in alignment with your prospective xMII 12.0 application.
Best Regards,
Jeremy Good

Read Idoc Data In xMII 12 BLS Transaction

Hi All,
I am new to xMII.
I followed the instructions suggested in the Document "How to Send an IDoc from the SAP R/3 Enterprise to the SAP xMII IDoc Listener" By Diana Hoppe and Michael Appleby written on 04 Dec 2008. It was pretty simple and i was able to complete all the steps.
In the Message Monitor in xMII 12.0 i am able to see " 5 Messags Found" and they are listed below in a grild with the server name, Message Name, Message Type etc
Example
Server Name Message Type Message Name Message Category Received Time Processing Time
MII_IDOC IDoc LOIPRO01 MII_IDOC 2009-07-10 02:11:25.911
Now i would like to know how do i read the contents of this IDOC i.e Production order? Is there a sample or stepby step guide which explains how i can get this data into an xML message in a BLS Transaction?
Are there any simple steps to be followed to get this data from the IDOC?
Please help me undestand this. Thanks in advance.
Regards
Suraj Prabhu

Hi Dipankar,
I had Pre ordered your book and I just received a copy. The first impression wrt the Contents & Coverage of the book looks excellent.
Congratulations to you and Abesh on this achievement. Writing a book on a topic which there has been no book written earlier is a great feat on its own.
Will be spending more time with the book today evening.
My Expectations from this book:
1. A good intermediate to Expert developer/ BA / Architect guidance.
2. Error Handling & Implementation - Best practices
3. A Reference book for the current implementation I am doing with a customer :).
Will keep you updated with my comments on the book. Since this is a first time I am working on a xMII implementation this book will be a life saver for me and could not have come at a better time. Thanks again.
BTW u2013 First thing I checked in the book was steps on how to read the data from the IDOC in the Buffer and that has been explained pretty well and in detailsu2026.. Thanks again for that.
Regards
Suraj Prabhu

Download Documents from DMS in xMII

Hi,
I need to download some documents from SAP which are maintained in DMS.
I know there are some BAPIs like BAPI_DOCUMENT* and I know how to use them in ABAP , ITS and webapplication server.
But I am not able to think of how to do it in xMII.
Can some one share the details.
Thanks,
Amara.

Sam,
I modified my transaction in order to save what exactly I am getting from SAP to xMII using an image saver action block to some folder with xxxx.xls file name.
Just because of my curiosity I double clicked on the file that is just created by our transaction. It opened <b>PERFECTLY WELL</b> in MS Excel.
So your question about asking to post garbled data clarified one of the two questions I have. Is the data getting corrupted while transmitted from SAP to xMII or is the data getting corrupted while transmitted from xMII to browser.
From the above modification to transaction of saving the file to a folder and opening it in MS Excel confirmed that the data is not getting corrupted while transmitting it from SAP to xMII. From now on we have only one thing to deal with i.e. that the data from xMII to Browser.
To confirm this, I created a test transaction with only one action block with ImageLoader and in the outgoing parameters I assigned imagedata property to transaction output property FILE. and I accessed it from browser using the below URL http://xxxx/Lighthammer/Runner?OutputParameter=FILE&Transaction=TEST_DOC_TRAN&content-type=application/x-msexcel . In this case also it is showing garbled data. Just to save you time I have send you transaction and test XLS file can be of any XLS file. Just to let you know that I have configured imageloader to load file from c:\inetpub\wwwroot\ directory.
Let me know if I need to provide more info.
Thanks in advance.
Srinivas.

Problem with BAPI_DOCUMENT_CHECKOUTVIEW2 while calling using JCO of XMII

Hi DMS Gurus,
The above FM is successfully executing and creating a local copy in temp folder of where the FM running using SAP GUI.
But when i call using jco,i am getting some problems.
1. If i execute the FM with default values for http dest and ftp dest, i am getting error saying << c:\temp\....file could not be created.
2. When i changed the HTTP destination to <<SAPHTTPA>, it is executing fm successfully but dont know in which system the file is downloaded.
My client application or xMII server ( where jco service is running ) or ABAP server.
I checked in the first 2,i didn't find.
SAP GUI is not installed in xMII server.
But my requirement is to download to the physical server of xMII ( jco ).
Is this any thing to do with creating http destinations??
If that is the case, can any body help me in creating http destinations..
and i heard something about SAPFTP.EXE ,is that should be some where in client or any servers??
Please help me.
Thanks
Vansi

Vamsi,
As I mentioned in this forum thread, bapi_document_checkoutview2. You have to use the POST action in BLS to communicate with the HTTP Interface of Content Mgmt. directly. The only other alternative is to write your own BAPI to retrieve the content and send it back to xMII via the JCo action (Hint: The data will be base64 encoded and can be saved to the filesystem via the Image Saver action even though it is not an image).
Sam

XMII 12.0 SP2 message rules issues

I'm running xMII 12.0 SP2 on NW 7.0 SP13 and I have some questions and comments.
1. In the Message Processing Rules - Parameters section, what does the "Value" mean? And why does it have to be set to "ReceivedMessageXML" for the "Name" checkbox to remain checked? Is this some internal xMII parameter name which the message processor uses to map the input parameter? It it must be "ReceivedMessageXML" why have it at all? Are there other valid Values?
2. Also in Message Processing Rules, there are some strange browser issues. In IE 7, if you create a new Rule all the fields are cleared and server name defaults to the first choice in the combo. If you look at the Message Type radio buttons, the IDOC button is missing. You have to select a transaction before the button appears. This doesn't occur in Firefox 2.0
3. Still in Message Processing Rules with Firefox 2.0, when you click "New" rule, the category/transaction fields remain from the previous rule (depending on whether the previous rule was a category or transaction type rule). In IE 7, clicking "New" clears those fields.
4. There's a browser issues in the portal too. It works fine in IE 7, which is likely the officially supported browser, but in Firefox 2.0, the the top level portal items cannot be expanded to show their contents. I'm guessing Firefox is not a supported browser...
5. We ran the latest migration tool against our 11.5 code - approximately 70 transactions, a couple dozen irpts, javascript, images, 100 or so query templates and a smattering of display templates and it worked flawlessly. I noticed that the migrated IDOC listener rules are named "Rule 1", "Rule 2", etc. However, you cannot save rules with spaces in their names. Is this intentional? We copied/renamed them all anyway to match our naming scheme.
6. Does the xMII Best Practices document address naming conventions of some of these new xMII 12.0 features? e.g. should message rule names have the company name as a prefix such as "Visiprise_DMO100_MATMAS"?
Thanks much!
-tim

Partha, thanks for the response. If you have a minute, I have a few more questions/comments:
1. Are there other input message parameters available besides "ReceivedMessageXML"?
2. If not, and you can only send in the "ReceivedMessageXML", why do you need to set the Value column to "ReceivedMessageXML"? Isn't the checkbox enough to indicate which transaction input parameter you want the message XML mapped to?
3. you say "if u select the check box against one or more transaction input params..." - why would you ever select more than one? Isn't the entire message payload going to be sent as an XML type parameter?
4. I like the idea of being able to set other input parameter values from the message rule. The trick is to not check their checkbox, right?
Thanks,
-tim

Displaying PDF files created with BLS in xMII 12

Hi all,
we are creating dynamic PDF Reports and store them in an xMII Web folder like "/Project/WEB/PDFFiles/".
The problem is that I cannot display the PDF File after creation to the user, because when I use the URL it says an error like "file cannot be found". Only after I open the Workbench and "publish" the file, the URL works and the PDF is opened.
Can I execute the "publish" command from the web page via JavaScript? Or from the BLS after it has created the PDF?
Regards
Michael

Hi, Michael.
The rendered PDF document is stored in a "string" parameter. Create a transaction output parameter of type string, and name it "PDFContent". Now, to stream the data back, create a hyperlink of the format:
http://<yourserver:yourport>/<this depends on your version>/Runner?Transaction=YourFolder/YourTransaction&OutputParameter=PDFContent&OutputContentType=application/pdf
When the user clicks on this link, the PDF will be generated and sent to the browser and should automatically open the Adobe PDF Reader. Note that this technique can be used with all kinds of different content (I've done the same for BLS-created HTML, SVG, PDF, CSV, and even Minitab statistical files).
In some cases, you may need to "trick" IE into forcing an open of the PDF viewer, in which case you might want to tweak the URL as follows:
http://<yourserver:yourport>/<this depends on your version>/Runner?Transaction=YourFolder/YourTransaction&OutputParameter=PDFContent&OutputContentType=application/pdf&PDFContent.pdf
Sometimes IE uses the ".pdf" at the end, sometimes it uses the content type/mime type. Seems inconsistent.
Best regards,
Rick

Process IDOCS in xMII

Hi All,
I am trying to send material and process order data to an external application and it should be through xMII. So, i am trying to use IDOCS for this.
First, I configured my SAP system and xMII so that IDOCS can be sent. Finally, i am able to send IDOC to xMII and can see it in the JCO\Output folder.
Now i want to write a new transaction which reads this IDOC and sends out the data to the external application.
Can any one tell me is my approach correct or there are any other easy options for this ?
Thanks in advance,
Srinivas.

Paul,
I'm sure a lot of times the tone of some respones may seem irritating...mainly because we are irritated with questions on how to do other people's work.
Simple document manipulation is a basic feature of xMII that anyone familiar with the product will know how to configure; especially when we have all the templates for this already defined. A glance through the best practices guide would have already solved this problem. Simply logging on to the SDN and asking people on how to do one's work is unacceptable.
We are not mean people nor do we not care about our community. The exact opposite is true: we care enough to try and filter out all the mundane content so that questions that can help OTHER people as well are more apparent than questions asking what xMII is, how can i use xMII or how i just installed xMII and don't know how to use it.
We are all here to make things better....which is why there are a multitude of sources to LEARN xMII and then come in here asking techincal questions.
I thank you for listening and reading....

XMII Content

Similar Messages

Maybe you are looking for