XMII Install/Logon Issue

I have installed xMII on WinServer 2003 but xMII does not recognize the admin password I input during the installation.  I have uninstalled and reinstalled several times with the same result (assuming that I made an error typing in the password).
I can navigate through most of the pages one normally would be able to navigate via the localhost/Lighthammer/Menu.jsp option but when I hit Security Manager and I'm challenged with an xMII login I get 'invalid username or password' with the credentials I know I put in during the installation.  Very strange and confusing on what should be fairly routine I would think.
Thanks.

Hi Dauglas,
Hi Antonio,
We faced the same problem while installing first time in my PC.
please follow the steps to over come this problem
1)please check the url in the browser http://<hostname or localhost>/
a)if it gives default page based on the Operating System then IIS server is working fine.
b)if it is not giving any default page please follow the steps
start-->run --> enter "services.msc" and press ok . please check the services "IISAdmin" and "WorldWideWebpublishing" is running or not.
If it not running plese start the two services
Start>run>enter "inetmgr" and press ok.In "websites" folder -->start the "DefaultWebsite".select "DefaultWebsite" and right click on it and "browse" it.
you will get default web page
please check the url once again
http://<hostname or localhost>/
If it gives defultpage IIS server is working fine. Even though you are getting any page please run this "ASP_Patch_WS6.zip" file
check once again the url
2) please check ServletExec is running or not in services.if not please start it.
After this http://<hostname>or <localhost>/Menu.jsp
you will get the default page.
if there is any problem please let me know.
Regards
Srikanth

Similar Messages

  • Drill down functionality logon issue.

    Hi Experts,
    Recently we implemented SAP NW04s EP 7.0 and SAP BW.
    We are following SAP logon tickets mechanism. We created a System Object in Portal to display the BW reports on the Portal.
    Users can logon to the Port6al and access the BW iViews and execute the BW reports properly. All the functionalities are working fine except for the BW Drill down fucntionality. When the users logon to the portal with their UserId and Password they can execute the normal BW Reports. But when the users drilldown the report it is asking to enter BW System User id and Password again.
    This logon issue happening for only BW Drilldown reports created either with local  BW system Or source systems R/3, CRM etc..
    The portal certificates were imported properly on the BW system in the cert list, ACL list, profile parameters are specified correctly.
    Regards
    Ravi

    Hello Ravi,
    Am not sure if this will work but you can try resetting the BW password.
    We have faced an issue on similar lines which got resolved by resetting backend system password.
    Let me know what happens.
    Regards,
    Ritu

  • Sap xmii 12.2 issue

    who has installed the new version sap xmii 12.2? after i installed it, i found i can't find the lable "Navigation Services ". how can i view the page i published by publish assistant tools?

    Hi buddy
    We still are fighting with MII 12.1 issues and raising tickets to SAP. So why so hurry to run for MII 12.2?
    Regards
    Som

  • Logon issues - 2 users (G4 + G5) migrated to MacBookPro = 3 login profiles

    So have finally upgraded to a MacBook Pro 17" i7 and have migrated user info from my previous models (PowerBook G4 17" and a PowerG5 - both separate users/logins).
    My new MacBook Pro has a separate identity.
    I've been using Microsoft for Mac 04 on both the G4 + G5 since 2004 and I understand that this should still be usable on the MacBook Pro (yes Microsoft Office for Mac, including Rosetta, is installed on MacBook Pro).
    I have loaded Microsoft Office onto the MacBook Pro login - but Microsoft does not work - it just freezes mid loading of software application i.e. Word, Excel, Entourage or PowerPoint! When I attempted to open Entourage it came up with "unable to use with this identity".
    Am I right in assuming that this is because my Microsoft office software is not licenced for "another Mac"?
    If so I guess I would need to delete Microsoft from the G4 + G5 user environments thereby allowing only the MacBook Pro authority to access the software?
    I really want/need to import user info from all previous Macs esp Entourage Project Centre (contacts, related client work files etc).
    Have saved all data (and preferences) from G4 + G5 onto an external Hard Drive as well. So just would like some pointers on how to best sort the above issues.
    *Is there a better solution?* - other than switching to iWork
    (I know, I know - switch to iWork instead is clearly an option. I do have that loaded as well but I still need to access Microsoft Office when clients send their 40pg documents to me in Word and all their formatting is out of whack in Pages!!! In order to open in word I currently have to switch user logons and access document separately.
    Is the following a plausible option?
    Delete/remove/uninstall Office from G4 + G5 login environments thereby allowing only the MacBook Pro environment the authority to use Microsoft Office.
    If so, how do I integrate my G4 + G5 user preferences (i.e. Entourage mail, client contacts, project info and linked documents) into my MacBook Pro User ID?
    Would really appreciate some guidance ...
    Thanks

    Have you tried simply running disk utility and repairing permissions?

  • HP P1102 installing driver issue

    Hello,
    I have problem with installing of driver for Printer HP LaserJet P1102.
    At the end of installing is appeared message: Printer installation failed. Printer was not installed.
    After this I tried to install again, and message was:
    1. After click close disconnect USB cable from the printer.
    2. Turn printer off, and after this turn it on.
    3. Connect USB cable to the printer.
    I do this but unsuccesfull.
    Please help.
    I have Windows 7 Ultimate operating system.

    Hi @Visla ,
    I see that you are having issues installing the printer. I would like to help you out today.
    Disconnect the USB cable.
    Here are the steps to run the uninstall from the computer or the CD.
    To uninstall from program files:
    Touch the Windows key and the E key to access the computer window.
    Select the C drive.
    Select program files or program files x86.
    Open the HP and printer name folder.
    Select uninstall.
    Uninstall the software from the CD:
    Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
    I would disable all the start up programs and temporarily turn off the Antivirus Software to see if there is a program interfering in the back ground. How to use MSCONFIG . Click on the start up tab and click disable all.
    Restart the Print Spooler.
    Click Start (), type services.msc in the Start Search box, and then press Enter.
    Right-click Print Spooler, and then click Properties.
    Under Service status, click Stop and then Start, click OK.
    Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the computer.
    The USB cable shouldn't be longer then 6 feet. Don't connect the USB cable until prompted.
    Download, save and then run the newest drivers or run the CD.
    HP LaserJet Pro P1102w Printer Drivers.
    Test the printer.
    Then you will have to go back and enable the startup programs and turn the Antivirus Software back on again.
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • WEB Gui logon issue.

    Dear Support,
    I've activated the SAP Webgui and it is working fine. The problem is that the username and password textboxes on login screen are disabled with a message 'via popup' and when i click logon a popup ask me for the username and password. I want to enable these textboxes so that despite a popup occur user can input their information directly on logon page.
    Please help me to resolve this issue. Thanks in advance
    With best regards,
    Basis Team

    Dear Edgar,
    Thanks a lot for your prompt reply. I've made the settings you specify and now the text boxes are visible. but when i enter username and password and press logon button then it give me the following error:
    "Erorr start here
    The URL http://172.16.100.180:8000/sap/bc/gui/sap/its/webgui was not called due to an error.
    Note
    The following error text was processed in the system T01 : Communication failure
    The error occurred on the application server ideskesc_T01_00 and in the work process 0 .
    The termination type was: IMC_CANCEL_TX
    The ABAP call stack was:
          Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_ITS===============CP
          Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
          Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
          Module: %_HTTP_START of program SAPMHTTP
    Error ends here".
    Please help and guide me to resolve this issue.
    Thanks a lot.
    Basis Team.
    Edited by: Basis team on Jun 19, 2009 9:06 AM

  • SAP GUI710 Logon issue

    Hi , all
    Now , i am using SAP GUI710 , Patch level 3,   i have an issue , if i leave the sec untouched for about 5 minutes , GUI will log off itself , and give me this information:
    CD1: connection to partner " ..........: sapdp00" broken
    WSAECONNRESET: connection reset by peer
    though i can logon again , but this really boring me , every 5 minute , if no activity , then auto logoff and i need to logon again.
    what is the problem , how to fix this ? thanks.

    Hello,
    If this happens for all the users , pl check the SAP instance parameter  value rdisp/gui_auto_logout.
    If it is 0 there wont be any auto log out.
    set the value in seconds means if you set it at 300 it will log out automaticaly after 5 secs.
    Pl try this . Dont forget to restart the server after making the changes.
    Award if resolved.
    Regards

  • IOS Remote Desktop Client Logon Issue Prompts to Logon 3 Times with RDGW

    I have an issue when connecting from the Remote Desktop client iOS on multiple iPads/users.
    First a little background: We have an RDS Web Access / RDS Gateway (2012 R2) setup and properly configured. We can logon using it just fine from the Mac OS version of the app, Android version of the app, or from a Windows PC. When we try to
    connect via the iOS app we get the prompt to logon 3 times. Due to security reasons, we do not want them to store their credentials on the iPads, which is the only method I have found to eliminate the triple password entry. It only prompts once on the Mac
    OS version, Android version or from a Windows PC.
    The password isn't being entered incorrectly and the servers are not registering any Audit Failures for the logon attempts. Can you assist?
    Additionally I would like to recommend the addition of a feature to be able to setup remote resources but prompt for the password on app launch for security reasons. That way they would have to enter it once but then they could access any resources needed.
    Thanks,
    Nate L

    I am not comfortable posting the entire log file but let me give you the high level summary. The settings section for the active connection:
    [2014-Jun-17 12:45:23] RDP (0): Final rdp configuration used: {
        activeUsername = "domain\username";
        arcTimeout = 1800;
        configurationVersion = 8;
        console = 0;
        gatewayId = XXXXXXXX;
        host = "InternalServerHostName.domain.local";
        label = "";
        mouseMode = "-1";
        offsetX = 0;
        offsetY = 0;
        peerIp = "ExternalRDSGatewayIP";
        port = 3389;
        previousMouseMode = 1;
        previousUtilityBar = 0;
        screenshotScale = "0.125";
        soundMode = 1;
        swapMouseButtons = 0;
        type = rdp;
        utilityBar = "-1";
        zoomFactor = 1;
        connections =    
            ...bunch of addresses...
        host = "ExternalRDSGatewayHostName";
        id = XXXXXX;
        port = 443;
        temporary = 1;
        type = rdp;
        kCFProxyTypeKey = kCFProxyTypeNone;
    It then attempts to connect to the InternalServerHostName.domain.local.
    [2014-Jun-19 09:40:01] RDP (0): Resolved 'InternalServerHostName.domain.local' to 'ERROR: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.' using NameResolveMethod_Unknown(0)
    [2014-Jun-19 09:40:01] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.(phase: 0, type: 0, reason: 0, systemCode: 0, systemMessage: )
    [2014-Jun-19 09:40:01] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Jun-19 09:40:02] RDP (0): Showing credentials dialog
    It then displays the same settings again with the exception of an additional line after the gatewayId line:
    gwAutodetectState = kConnectionGwAutodectedForceGW;
    Then it goes through the interface list, not using any proxy, correlation id, then resolves name:
    [2014-Jun-19 09:40:10] RDP (0): Resolved 'ExternalRDSGatewayHostName' to 'ExternalRDSGatewayIP' using NameResolveMethod_Unknown(0)
    [2014-Jun-19 09:40:11] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 217
        User Message : The gateway failed to connect with the message: 403 Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator. 
    [2014-Jun-19 09:40:11] RDP (0): Error message: The gateway failed to connect with the message: 403 Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator. 
    )(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
    [2014-Jun-19 09:40:11] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Jun-19 09:40:11] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Jun-19 09:40:11] RDP (0): Showing credentials dialog
    Then it displays the same settings again except for the gwAutodetectState line changing to:
    gwAutodetectState = kConnectionGwAutodectedHTTPSTried;
    Then it connects ok. I went to our firewall (MS Forefront TMG) and monitored for traffic from the iPad iOS App (based on network it is on). I don't see the initial connection attempt at all, which is expected because according to the log above it looks
    like it tries to connect to the host directly...which it shouldn't?
    Then in the second attempt I see it trying to go to http://ExternalRDSGatewayHostName:443/remoteDesktopGateway/ which again it shouldn't be doing because that URL (the remoteDesktopGateway) is not part of the RDSGW or RDSWA 2012 R2 IIS
    config or am I missing something? It should be going to Rpc or RDWeb right? or do I need to allow that path through too?
    Thanks,
    Nate

  • Downloading and installing podcast issues

    The podcasts I try to download get to 100% downloaded and then I get a message that the podcast had an error downloading cancel or retry. It's been consistent. Anyone else having these issues?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ install.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Installing Driver Issue

    Hello;
    First of all, english is not my first langue.
    I have GT70 Dragon Edition and I decided to update my drivers so I went to;
    http://www.msi.com/support/nb/GT70_Dragon_Edition.html#down-driver&Win8%2064
    and downloaded drivers. However, I couldn't install Bigfoot LAN and Killer (Bigfoot) LAN.
    For installing Killer (Bigfoot) Lan I used cleaning tool and after that I tried to install Killer but it gave error that your hardware doesn't suppor Windows.  
    In addition, when I try to install Bigfoot LAN (not killer) everytime it says 'an older version of the software found' and says it upgrade but nothing happen.
    For this problems, I did what he/she says on here;
    https://forum-en.msi.com/index.php?topic=178064.0
    However, I don't have Killer Network Maneger anymore and I don't know I did everything correctly, why I couldn't install Killer (Bigfoot) Lan and Bigfoot LAN. Do I worry?

    Quote from: mklim;111725
    Try if this driver download could help.
    https://drp.su/download.htm
    MSI provides customized drivers to our users and the third-party's program for the driver update might cause some unknown issues. Thus, we don't suggest our user to use the third-party program for the driver update.

  • Exchange 2013 CU5 fresh install suffering issues with services not starting and coexistence with 2007

    Hi everyone,
    Hope you can help me out on a couple of issues I've been experiencing during the initial stages of a project to upgrade an on premise Exchange 2007 to 2013.
    On Monday last week I installed the first Exchange 2013 server into the network after a few weeks of careful planning, information gathering and remediation of our current Exchange 2007 environment and associated systems.
    The server itself has been having some issues from the word go, some of which I've resolved but none that are show stoppers but I want to get them resolved before building more servers and setting up the planned 2 x 2 node DAG's
    The main problems are as follows:
    There's usually one service that does not start following an OS restart and it's not always the same service. So far I've seen the following not start: DAG Management, Migration Workflow, Anti-spam Update, Unified Messaging, UM Call Router, Transport
    Service.
    The critical system event log entries are complaining of timeouts when the services are starting up but I can't imagine that the servers boot time is too long...  It's a 2 vCPU/12Gb vRAM VM, Windows 2012 R2
    I receive an error in the Event Log regarding RPC over HTTP Proxy
    to one of the 2007 CAS servers (not our primary one). The first error was because the Windows Component was missing but since installing it, disabling Outlook Anywhere, reenabling it, restarting the server, I now have a new error which is shown further down
    this post
    The Exchange 2013 server install is pretty default, CAS/MBX roles and some basic configuration performed such as new DNS entries, Public SSL certs installed and assigned, URL's updates, SCP updated. I have review and resolved some errors from the event logs
    for over chatty warnings about disk space (the warning is that we have loads of space...)
    This is a brief outline of the environment:
    Exchange 2007 SP3 RU13
    UK - Two physical locations in a stretch LAN (100Mb WAN)
    4 x CCR Cluster Mailbox Servers in two separate CCR Clusters
    Cluster 1 - Windows 2003 R2: One physical, one virtual server - don't ask, legacy install and I know the virtual is not a supported configuration.
    Cluster 2 - Windows 2008 R2: Two virtuals - New cluster built following a 4 day failure of Cluster 1. The aim was to move to supported config and decommission cluster 1.
    Note: Migration of Cluster 1 to Cluster 2 was halted as 2013 was so close it seemed pointless to continue the migration and instead migrate both Clusters to 2013 once in production.
    2 x Virtual Windows 2003 R2 - Hub Transport Servers
    2 x Virtual Windows 2003 R2 - Client Access Servers
    1 x Virtual Windows 2003 R2 - Unified Messaging Server
    1 x Virtual Windows 2003 R2 - Edge Transport Server (DMZ)
    US - One physical location
    1 x Physical Windows 2008 R2 - Mailbox, Client Access, Hub Transport Server
    Exchange 2013 CU5
    UK - Installed into same site along side Exchange 2007 servers
    1 x Virtual Windows 2012 R2 - Mailbox, Client Access Server
    Problem 2 Error Message - Please note, server names and domain name changed:
    Log Name:      Application
    Source:        MSExchange Front End HTTP Proxy
    Date:          18/07/2014 10:00:37
    Event ID:      3005
    Task Category: Core
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      EXC2013.domain.local
    Description:
    [RpcHttp] Marking ClientAccess 2010 server EXC2007CAS1.domain.local (https://EXC2007CAS1.domain.local/rpc/rpcproxy.dll) as unhealthy due to exception: System.Net.WebException: The underlying connection was closed: The connection was closed unexpectedly.
       at System.Net.HttpWebRequest.GetResponse()
       at Microsoft.Exchange.HttpProxy.ProtocolPingStrategyBase.Ping(Uri url)
    Event Xml:
    <Event xmlns=http://schemas.microsoft.com/win/2004/08/events/event>
      <System>
        <Provider Name="MSExchange Front End HTTP Proxy" />
        <EventID Qualifiers="32768">3005</EventID>
        <Level>3</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-07-18T09:00:37.000000000Z" />
        <EventRecordID>64832</EventRecordID>
        <Channel>Application</Channel>
        <Computer>EXC2013.domain.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>RpcHttp</Data>
        <Data>EXC2007CAS1.domain.local</Data>
        <Data>https://EXC2007CAS1.domain.local/rpc/rpcproxy.dll</Data>
        <Data>System.Net.WebException: The underlying connection was closed: The connection was closed unexpectedly.
       at System.Net.HttpWebRequest.GetResponse()
       at Microsoft.Exchange.HttpProxy.ProtocolPingStrategyBase.Ping(Uri url)</Data>
      </EventData>
    </Event>

    Hi Off2work,
    I've gone through the article and the Get-OutlookAnywhere commandlet looks fine (especially when compared with our working CAS).
    Having looked through IIS I have spotted two additional misconfigurations with a missing setting to require SSL on the RPC folder and also the .NET version was not set.
    I've now set those to Require SSL and .NET 2.0.5072 however this has made no difference following restarted of both 2007 CAS and 2013 servers.
    I could potentially reinstall the CAS server or additionally decommission it as we have two of them and the other is not causing any errors with the 2013 server. This broken CAS server doesn't even have DNS records (except it's own hostname) or firewall
    rules pointing to it, nor does it have any active client connections if I check with a quick netstat -a
    As for UM, it's next on my list following some client/server connectivity testing so I have not yet assigned the SSL to the services or setup the dial plans, etc.
    The services do start most of the time, but others then don't so it's not a consistent issue with just this service. On my current boot, the DAG Management service failed to start, but again I don't have a DAG implemented yet.
    I will see if UM drops out of that list once I've configured it shortly
    Thanks for taking the time to respond (and that goes to DareDevil too)

  • Logon issues when connecting to the R/3 system via System Template

    Hi All,
    I have created a System object for connecting to the R/3 system.
    the R/3 system is on ITS server.
    i have set the connector properties, ITS server details, User Management properties.
    Connector Porperties: Application Host: -
    , logical system name -
    , SAP client---,SID---, System number -
    server port-----,System type : sap_R3
    ITS server details : ITS host name, ITS path :/scripts/wgate, Protocal :http
    Usermanagement properties :    Logon method : SAPLogontickets, user mappingtype : Admin/user.
    Alias :Given the alias for the system created.
    i have also checked with the connection tests. The ITS Connection is green. but the connection test for the connector is red.
    Also the Portal user is not the same as the SAP backend user. So for this i have also made the user mapping, Under System Administration ---> Usermapping . ( we are using EP6.0)
    When i finally created a SAP trasaction iview based on the Alias. and tried to preview it. it is  showing me the error   "
    Name or password is incorrect, please reenter" .
    but in the preivew if i give the user id and password which i have mapped under the user mappings  it is entering the SAP trasaction.
    kindly suggest what can be the issue?
    Thanks & Regards,
    Kavitha

    Hi All,
    Thanks for all your replies. And sorry from my side for the late reply.
    I have followed all the suggestions made by every one of you.
    Also Arun, i have checked with the blogs that you have sent. All the settings done by me are exactly the same as defined in the blogs.
    but still the same error persists.  also When i tried to Login with the same user id as that of portal . It is working fine.
    Also while going through the blogs i have found that.. While doing the Connection tests. One of the test,  Connection test for the connectors is failed. i am unable to know the reason for failure.
    is this because of this reason, is the iview is asking for the re entering of user id and password ?
    kindly help.
    Also in most of the blogs i have found that for searching the  Message server. When we are not sure of name of the message server the  go to Transaction SMICM..... Where should this Tcode be entered. is it in the r/3?
    Thanks & regards,
    M.Kavitha harika.

  • OSX Mountain Lion install / download issue. Help Please!

    I have attempted to download OSX ML 3 times now, each time the download completes, install runs then after restart there is no change. ML hasn't been installed. Anyone had the same issue? Any fix?

    The next time you download Mountain Lion, make a copy and move it out of your Applications folder. That will save downloading it again.
    What version of the OS are you currently running? If it is 10.7 try the below:
    https://discussions.apple.com/message/21111661#21111661
    If you look in your Applications Folder is the installer still there?
    If you hold down the option/alt ket during a restart, do you see a recovery volume?
    Are you getting any error messages?
    Try booting into the Safe Mode to install it.
    Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About

  • Playmemories logon issues - Mac Mavericks 10.9.3/ILCE6000

    I've just purchased the ILCE6000 and am unable to logon to Playmemories.  On my Mac I click on Sign In and nothing happens at all.  
    On the camera having connected to wireless network okay I get the list of apps available but when selecting one to download I get prompted to confirm I have a Sony Entertainment Account and on selecting 'Yes' nothing happens and the camera appears to seize up as to get it to do anything I have to power off/on.
    Any ideas for solutions will be much appreciated.
    Thanks
    Solved!
    Go to Solution.

    Solved my own issue. Sites were blocked by Sky Broadband Shield. Now set to allow online gaming and all connecting okay.

  • OIF+OAM: install/config  issues

    This post is long. Hoping that at least one of the issues is seen by someone or someone has insights before we open SR(s) with Oracle.
    We have a working OAM/OVD 11.1.1.5 installation (done according to the EDG at http://docs.oracle.com/cd/E21764_01/core.1111/e12035/toc.htm).
    We started an evaluation of OIF and ran into some issues grouped under Install and Config categories.
    h2. Install issues:
    We installed it per chapter 16 of that EDG and and all the steps went OK except step 16.7 (http://docs.oracle.com/cd/E21764_01/core.1111/e12035/oif.htm#BAJCJHBG).The config properties userldaphaenabled, fedldaphaenabled are getting set via WLST but don't appear to be persisted anywhere. On a restart they are false again. Are they supposed to be saved to config.xml of the IDMDomain? Can I try adding them manually like this as child elements under each of the wls_oif managed servers?
    <datastore>
    <userldaphaenabled>true</userldaphaenabled>
    <fedldaphaenabled>true</fedldaphaenabled>
    </datastore>
    If those settings were properly set what is it supposed to do? I can see that config.xml, cots.xml files are stored as blobs in one of the OIF db tables. Will the above setting move them from DB to LDAP?
    h2. Config/Runtime Issues:
    We proceeded with configuration because the /sp/metadata and /idp/metadata test URLs are working fine via the VIP address. we used this manual to do the integration.
    http://docs.oracle.com/cd/E21764_01/doc.1111/e15740/oif.htm#CACJDDGE. In section 4.3.1.6 (Configure Oracle Identity Federation in SP Mode) of this document it says to configure Oracle SSO. We only have OAM and not osso. We went ahead and configured the second tab (OAM) in the screen capture in that section as well (is there any documentation on how to configure that tab?)
    In SP mode (section 4.3) , testing of a resource protected with OIFScheme in OAM is not successful. It does not show any OIF login screen. Instead it takes the user to through these URLs:
         1.     https://sso.company.com/test-app/
         2.     https://sso.company.com/fed/user/sposso  
         3.     https://sso.company.com/fed/user/authnoam?refid=id-tB20kXzmHjpn6MUSdOr7qbmd2OU-
         4.     https://sso.company.com/fed/sp/art20?SAMLart=AAQAAbV1ElKBtte9uuhKoeo4h%2FMufCdY2wDlDIM2T9dL%2BvhsvtfUrwCuZg8%3D&RelayState=id-JPh8MY05pAZRckl4yOc2J4-80GI-
    and then shows this error in the browser:
    Error 401--Unauthorized
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.4.2 401 Unauthorized
    The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.46) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was given in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained in section 11.
    The following errors are seen in the WLS_OIF1 (we turned off WLS_OIF2 during this test) managed server logs:
    <Mar 10, 2012 10:58:37 AM PST> <Error> <oracle.security.fed.eventhandler.authn.engines.oam.OAMAuthnEventHandler> <FED-18068> <Authentication failed: WebGate did not authenticate the user>
    <Mar 10, 2012 10:58:37 AM PST> <Emergency> <oracle.security.fed.model.config.Configuration> <FED-10174> <Property was not found: httpheaderattrcollector.>
    <Mar 10, 2012 10:59:27 AM PST> <Warning> <oracle.security.fed.http.handlers.authn.LoginRequestHandler> <FED-18051> <Authentication instant was not sent from the authentication engine.>
    <Mar 10, 2012 10:59:37 AM PST> <Error> <oracle.security.fed.util.ssl.KeystoreUtil> <FED-18080> <Could not retrieve key from the key store. Please verify that the key password is equal to the key store
    < this error is followed by an exception shown below>
    <Mar 10, 2012 10:59:39 AM PST> <Error> <oracle.security.fed.eventhandler.authn.engines.osso.OssoFinishSPSSOEventHandler> <FED-15134> <The service providercould not map the identity provider response to a user>
    FED-18080 exception:
    java.security.UnrecoverableKeyException: Cannot recover key
         at sun.security.provider.KeyProtector.recover(KeyProtector.java:311)
         at sun.security.provider.JavaKeyStore.engineGetKey(JavaKeyStore.java:121)
         at sun.security.provider.JavaKeyStore$JKS.engineGetKey(JavaKeyStore.java:38)
         at java.security.KeyStore.getKey(KeyStore.java:763)
         at com.sun.net.ssl.internal.ssl.SunX509KeyManagerImpl.<init>(SunX509KeyManagerImpl.java:113)
         at com.sun.net.ssl.internal.ssl.KeyManagerFactoryImpl$SunX509.engineInit(KeyManagerFactoryImpl.java:48)
         at javax.net.ssl.KeyManagerFactory.init(KeyManagerFactory.java:239)
         at oracle.security.fed.util.ssl.KeystoreUtil.createKeyManagers(Unknown Source)
         at oracle.security.fed.util.soap.OIFSSLProtocolSocketFactory.createSSLContext(Unknown Source)
         at oracle.security.fed.util.soap.OIFSSLProtocolSocketFactory.getSSLContext(Unknown Source)
         at oracle.security.fed.util.soap.OIFSSLProtocolSocketFactory.createSocket(Unknown Source)
         at oracle.security.fed.util.soap.OIFSSLProtocolSocketFactory.createSocket(Unknown Source)
         at org.apache.commons.httpclient.HttpConnection.open(HttpConnection.java:707)
         at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.open(MultiThreadedHttpConnectionManager.java:1361)
         at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:387)
         at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
         at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
         at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:346)
         at oracle.security.fed.util.soap.SimpleSoapSender.sendMessage(Unknown Source)
         at oracle.security.fed.http.flow.profiles.sp.SendSoapRequestSSOResponseHandler.perform(Unknown Source)
         at oracle.security.fed.controller.ApplicationController.processServletRequest(Unknown Source)
         at oracle.security.fed.controller.web.servlet.FederationServlet.doGet(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    A minor other problem seems to be with adcri:
    Cause: DFW-40112: There was an error executing adrci commands; the following errors have been found "Cannot run program "/app/iam/middleware/wlserver_10.3/server/adr/adrci": java.io.IOException: error=12, Cannot allocate memory"
    Action: Ensure that command line tool "adrci" can be executed from the command line.
    We can run the adcri tool from command line using the same LD_LIBRARY_PATH as used by the wls_oif1 server. Why is it trying to run it and failing and what is it trying to do? Can we turn it off?

    I reinstalled the suite. This time, during the Policy Manager install I left the "Root Directory for Policy Domains" (step/page 7-12) at the default, which was "/". The GUI now works correctly.
    On the previous install I changed the path to /AccessManagerPolicy -- it wasn't clear to me what the installer meant by 'root directory'. I did try to get /AccessManagerPolicy to work by creating a directory under my web root to match, but I still had issues with the Policy Domain -- the no policy domains would match. So, it looks like this parameter should never be changed in the installer.
    Aaron.

Maybe you are looking for