XML and the use off &

When entering a description, using the ampersand (&) character results in the character remaining but the word "amp" (&amp) is added
trawlled the next - cant find anything bout this. I beleive that the & prob needs too be like "&" - but not 100% sure. help!

Because the W3C says The ampersand character (&) and the left angle bracket (<) MUST NOT appear in their literal form, except when used as markup delimiters ..... Another version of that wording can be found under the Entity References section here

Similar Messages

Any idea why a 3 month old new IPad won't turn on? It has been charged today and was working perfectly last night while I used it to read a book. I have tried both the sleep/wake button and the on/off button on the front. Nothing is happening.

Any idea why a 3 month old Ipad will not turn on? It has been charged and I haved tried the sleep/mute button and the on/off button on the front. Nothing is
happening. It was working fine last nigh?

1. Hold both the Sleep/Wake and Home button down together
2. For 10 to 15 seconds
3. Until you see the Apple logo
4. Ignore the red slider
Note: Repeat it if it doesn't work the first time

TS4363 I have upgraded to Mountain Lion 10.8.2 with Mail 6.2 and the "Use Autodiscovery Service" checkbox can't be found. Any ideas?

I have upgraded to Mountain Lion 10.8.2 with Mail 6.2 and the "Use Autodiscovery Service" checkbox can't be found in Preferences. Any ideas?
Cannot connect to Hover mail server unless I login to my webmail and then the messages magically load in Mail and then it goes offline again.

Let it go... these DL's take forever, depending on the spped of your connection and the traffic on the servers.
If by morning it is still sitting there restart and the DL should pick up from where it left off.

My home screen is gigantic. As a result I cannot see the keypad for entering in my passcode. Somehow, everything on my home screen has expanded to gigantic size. I've tried to reset the phone by holding the home button and the on off button...

My home screen is gigantic… So much so that 1/200 of the normal screen display now fills up the entire screen. As a result, I cannot even see my keypad to enter in my passcode. I've tried a hard reset a few times (holding the home button and the on off button at the same time until the iPhone restarts). This has not resulted in any changes. Any ideas?

Thank you Lawrence. that worked! I have another question for you as well. I just got this 6 Plus and it is already saying that I am nearing the end of my storage. My iCloud is apparently 20gb and I have 6gb left. I'm attaching a screen shot. Any thoughts on how I can make available some more storage?
I Also wanted to get an enhanced quality Speech voice Alex, but it is saying I don't have enough Memory (I think it says memory because I can't read the message fully). Lastly, in your opinion does Grayscale really improve battery life above and beyond what can be achieved by closing out all apps etc. Thank you.

Has had 2 iTunes gift cards and the scratch off strip on the back leaves us unable to read the numbers and we can not retrive anysongs without the correct numbers and letters. What can we do? Please help...

Has had 2 iTunes gift cards and the scratch off strip on the back leaves us unable to read the numbers and we can not retrive any songs without the correct numbers and letters. What can we do? Please help...

iTunes Store: Invalid, inactive, or illegible codes

Every time I unmute my iPad, the sound efx does not come back. I can hear my keypad and the on/off sounds but no app sounds.

Every time I unmute my iPad, the sound efx does not come back. I can hear my keypad and the on/off sounds but I can't here the sounds from deleting photos, clicking on apps that are on my iPad. It does this every time I unmute my iPad. Please advise.

Hello PearldiamondMD,
I was thinking of a few recommendations for you. I recommend our iPhone Troubleshooting Assistant found here http://www.apple.com/support/iphone/assistant/phone/#section_1. Start at section 1, if that doesnt fix it, then section 3, and if all else does not work, section 5. At section 3 I recommend closing ALL the apps.
Here is section 1 to get you started.
Restart iPhone
To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
If your device does not turn on or displays a red battery icon, try recharging next.
All the very best,
Sterling

I have a imac g3 dv se, snow and after about 10minutes of it booting it makes a popping sound and the turns off, then it wont turn back on for another 5-10 minutes

i have a imac g3 dv se,500mhz, snow and after about 10minutes of it booting it makes a popping sound and the turns off, then it wont turn back on for another 5-10 minutes any suggestions?

Actually sounds like classic symptoms of a failing PAV (power-analog-video) on that model. Historically that's the weak spot in the G3 iMacs.
The lack of active cooling in the G3 iMac puts a lot of heat stress on this board and they eventually fail from overheating. Right now the board is still working as long as it's cool--it only fails when temps inside the computer rise.
About the only way to preserve the computer's life is to mount a 120mm fan directly on the case where the handle is--that's the exhaust port. The fan has to be positioned to PULL air out through that vent. It's an ugly solution to the eye but it has been done around here more than you would think.
Also make certain the bottom of the computer is not blocked. It the computer is sitting on a tablecloth or placemat, or there are loose papers on the desk under the case, it cannot get enough air into the bottom-mounted air intakes. Make/find some blocks to set the iMac a minimum of one inch (2.5CM) from the desk and move anything that can be "inhaled" from under the computer.
Even with such measures, the PAV board will eventually fail and be unrecoverable. It's a good time to start saving for a newer computer.

HT4199 My 4gs iphone has lost wi-fi connectivity. When I go to "Settings Wi-Fi", I see "Wi-Fi" and the on-off button, but it shows up in light gray. When I click "Off" to turn on Wi-Fi, nothing happens. HELP!

My 4gs iphone has lost wi-fi connectivity. When I go to "Settings > Wi-Fi", I see "Wi-Fi" and the on-off button, but it shows up in light gray. When I click "Off" to turn on Wi-Fi, nothing happens. HELP!

Try the suggestions here to attempt to solve your problem:http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. If so, contact Apple support or visit an Apple store.

What do i do if my ipod 3 is disabled and the power off button does not work?

What do I do if my iPod 3 is disabled and the power off button does not work?

Did you try restoring your iPod on itunes.

Question about xml schemas and the use of unqualified nested elements

Hello,
I have the following schema:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns="http://xml.netbeans.org/examples/targetNS"
    targetNamespace="http://xml.netbeans.org/examples/targetNS"
    elementFormDefault="unqualified">
    <xsd:element name="name" type="xsd:string"/>
    <xsd:element name="age" type="xsd:int"/>
    <xsd:element name="person">
        <xsd:complexType>
            <xsd:sequence>
                <xsd:element ref="name"/>
                <xsd:element ref="age"/>
               <xsd:element name="height" type="xsd:int"/>
            </xsd:sequence>
        </xsd:complexType>
    </xsd:element>
</xsd:schema>I am just wondering why would someone have a nested element that is unqualified? here the "height" element.
Can anyone explain this to me please?
Thanks in advance,
Julien.
here is an instance xml document
<?xml version="1.0" encoding="UTF-8"?>
<person xmlns='http://xml.netbeans.org/examples/targetNS'
xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'
xsi:schemaLocation='http://xml.netbeans.org/examples/targetNS file:/E:/dev/java/XML/WebApplicationXML/web/newXMLSchemaThree.xsd'>
<name>toto</name>
<age>40</age>
<height>180</height>
</person>

Don't worry about it.
There are two different styles of schemas. In one style, you define the elements, attributes, etc. at the top, and then use the "ref" form to refer to them. (I call this the "global" style.) The other style is to define elements inline where they are used. ("local" style)
Within some bounds, they work the same and which you use is a choice of you and the tools that generate the schemas.
A warning about the local style. It is possible to define an element in two different locations in the schema that are different. It will get past all schema validation, but it seems wrong to my sense of esthetics. With the global style, this will not happen.
So, how did this happen? Probably one person did the schema when it only had a name and age. Then, someone else added the height element. They either used a different tool, or preferred the other style. I'm aware of no difference in the document you have described between the two styles.
Dave Patterson

I dropped my Iphone in water and the on/off button stopped working, how do I fix it?

I dropped my phone in some water and it was only in there for about two or three seconds. I grabbed it and dried it straight away and made sure to get in all of it, and it was fine, everything worked. But about an hour after the on/off button stopped working, so i have to use the home button to unlock it and have to wait for the screen to turn off after 1 minute of leaving it. I cant turn it off and dont know how to fix it. Will it go away on its own, do I have to send it off to get fixed? This literally happened like two hours ago, and my phone is a bit more than a year old. Can anyone help me?

Make an app;ointment at the genius bar and take your credit card. You can get an out of warrnty replacement for an iPhone 4 for $149.
If you had just done it, the advice would have been to shut it off and put it in a bowl or bag of uncooked rice or silica gel for a week. Unfortunately, since it's been powered on for several hours, since then, it may have been permanently damaged. You can try the rice trick, but be prepared to pay for a replacement at some point down the road.

Excel data source and the use of add command

HI, Looking for suggestions on how to work with multiple inputs that cannot be joined directly. Here's the background.
The Report currently reads in two different Ecel files and uses 3 SQL commands to query an Oracle Database. I need to join the 5 data sources and am having issues with the 2 excel files. In one file I need to be able to derive a field based on another column in the file In order to create the join condition to the SQL commands. I'd equate this to a case statement in SQL, but how goes one do that using the 'add command' feature? What is the syntax?
Next I would need to join (left outer) the two excel files using two fields from file A (a1, a2) and 3 fields from file B (b1,b2,b3), where a1=b1 and b2 <= a2 <= b3 when rows from A exist in B. If row A does not exist in B then we still want it in the report and available to left outer join to the 3 oractab data sources.
runtime is also a concern.
Any Suggestions?

hi Elena,
in this case the use of subreports is not recommended. that's because you're exporting to excel and you need data in columns across the report. subreports will not, unfortunately, give you what you need.
this would bring you back to joining the datasources. what i would recommend is looking into using 'oracle database link' to link your oracle db to excel files. here's one article as an example but you may be able to find a better one. if you have questions on this please ask them on an oracle forum as the syntax that you need will be database specific.
a lot of databases have this type of technology which allows you to create a view to other data. sql server has 'linked servers', sap hana has 'smart data access'. essentially you are creating a non-materialized view to the external data. then this view is available on the main oracle server where you established this connection. this should be a lot easier than trying to bring a bunch of command objects together off independent datasources inside of crystal.
-jamie

My iPod touch won't turn off. I tried and the turn off slide button in stuck in the of position, but it's still not turning off. It's been a few days please help!!!!

My white 4th generation iPod touchs turn of slide button is stuck on off but my iPod won't turn off for some reason and it only shuts off when the battery dies. It's been stuck like this for some time. Please please please help!!!!

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

REgarding licensing issues involvng 'Computername' and the use of UpperCase4 vs Lowercase Letters

Does any one know if it would cause problems for the Office 365 software license to be displayed as licensed to an ALL CAPS name like 'MY-FAVORITE-PC' but the computer itself shows the computer name to be 'my-favorite-pc"?
If it does, which one should I change? A couple of people here have had this same problem (which usually occurs when they change to using a different PC for their account) I have to Deactivate their Old PC namer and then install the licnse to
their New OC using whatever name it has.
On more than one system, this has resulted in various odd "failure to contact Microsoft server" issues when activating. The problem continues for 7 days and then their copy of Office starts showing reed warning bards and eventually gets totally
unusable.
However, if I uninstall the office, deactivate the license, and reinstall it once again, it install just fine and acts ok but invariably at some point, the same thing occurs.
On one of them I noticed the difference in the case of the letters used in the computer name and the license name. On others I am wondering about various software add ins for Outlook or some other 3rd part application causing the problem. Whatever
it is, it gets extremely annoying. Officer 365 apparently must run an activation sequence almost constantly while Office 2010 (and I presume 2013) ran it once and were done with it.
Searching Google I have found too many possible reasons along with a lot of people who have had the same problems but no one seems to have the 100% solution. This has only started happening since we switched to Office 365 and only
seems to occur on systems that are changed out to different ones with the same User's 365 Account which is in good standing and has 5 available licenses of which only one is in use.
In the case of the caps vs lowercase I also wonder if changing the name to CAPS on their PC would create additional problems on its own?

Hi Questorfla,
For the Office 365 software license issue, I recommend you can post in dedicated Office 365 Forum to get a better response:
http://community.office365.com/en-us/f/148.aspx
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

Wage Type Creation in TRM and the use of IT 0017.

Dear all,
Can anybody tell me what are the std wage types for creating expenses like
e.g. (Air/ Train Fare charges, Conveyance, hotel allowances, Traveling Advance, etc.... all types of expenses).
as we have Std WT MB10 - Basic Salary in SAP for making new customised WT by coping MB10.
So, in the same way i want to know what are the std. WT in TRM for creating the above expenses.
And also tell me Friends the use of IT0017- Travel expenses and wat other infotypes we need to maintain in TRM.
Points will be awarded.
Eagarly awaiting your feedback.
Regards,
Prashant.

Hi NandaGopal,
Thanx for your reply.
As u said there is no std Wt for TRM especially, so can i copy the std wt M233 - Hotel Accomodation for my Travel expenses as mentioned here or can u pls tell me some std wt like M223 sothat i can coping those and make the new Trvl expenses like (Air/ Train Fare charges, Conveyance, hotel allowances, Traveling Advance, etc.... all types of expenses).
Waiting for ur reply.
Thanks & Regards,
Prashantkumar Tata

XML and the use off &

Similar Messages

Maybe you are looking for