XML and XSD file to an internal table

I had read a lot of thread but i don't understand how to deal with xml/xsd in R3.
I need someone that have a definite example for this escenary please.
With OPEN DATASET took from the server XML and XSD file, and put it in two internal tables type string.
What functions or method have to use, and how to use them, to charge the XML file in an internal table?
This is an example of XML and XDS:
XML
AND CONTINUE
Best Regards,

I just tried to interpret your question, it was not obvious what you wanted.
I guess what you mean is that you have defined (statically) a deep structure, and you want to decode the XML into it. That is called a transformation (transaction STRANS, statement CALL TRANSFORMATION). You have the choice between 2 transformation languages: XSLT and ST. Of course, it depends what release you are running.
I advise you to play first with the ID transformation, to convert an ABAP deep structured data object into XML, so that you see what XML is generated, this one is called asXML. If you create your own transformation, when you call it, it will first convert automatically the data object to asXML, and the transformation has to do the rest of the job.
You can do the opposite, i.e. converting from XML to a data object, according to the same principle (intermediate asXML).
Well, there are lots of things to say, I recommend you to read articles and documentation on XSLT and ST (search on SDN).
About XSD, it won't help (and I did never see any possibility to use it) to decode the XML, as you must anyway define the target data object statically (and there's no tool to generate the ABAP code of the data object definition from the XSD).
Note that you may also use iXML libraries to parse the XML.
Please tell us more.
BR
Sandra

Similar Messages

Where to place xml and xsd files in Tomcat

Hi,
This is rather a stupid question but I am totally new to JAXP technology and i wanted to know is there a specific location where i need to store the xml and xsd files i created?. And how would i mention the target name space for the xsd file? I am usinf eclipse IDE and Tomcat 5.5.
Thanks for the patiance.

Is the question so stupid that no one even want to try to reply?

Upload an XML file into the Internal table

Hi Guys,
I want to know, how to upload an xml file into the Internal table through ABAP programming

you just wanted to load the xml file into internal table (as a table of binary strings)or load the xml data mapped to itab row columns
for the first one you can simply use gui_upload
and for the second one you need to load the xml file using gui_upload and use XLST program to transform into an itab
Regards
Raja

Reading XML file to ABAP internal table

Hi all,
Iam trying to convert a XLM file into abap internal table , am using XSLT transformation to parse the XML file and i am using "CALL METHOD cl_gui_frontend_services=>gui_upload" for reading the XML file.
below is the XML file.
===========================================================================
- <PIXBridge version="2.2" timestamp="2003-04-09T15:27:00">
- <PIX>
<TransactionType>605</TransactionType>
<TransactionCode>98</TransactionCode>
<TransactionNumber>6888965</TransactionNumber>
<SequenceNumber>40001</SequenceNumber>
- <SKUDefinition>
<Company>GZL</Company>
<Division>BMD</Division>
<Season />
<SeasonYear />
<Style>ORT002A</Style>
<StyleSuffix />
<Color>K13</Color>
<ColorSuffix />
<SecDimension />
<Quality />
<SizeRangeCode />
<SizeDesc>M</SizeDesc>
<SkuID>200140577</SkuID>
</SKUDefinition>
</PIX>
</PIXBridge>
=================================================================
and my Transformation code is as below
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
    <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
      <asx:values>
        <IPIX>
          <xsl:apply-templates select="//PIX"/>
        </IPIX>
      </asx:values>
    </asx:abap>
</xsl:template>
<xsl:template match="PIX">
    <item>
      <TRANSACTIONTYPE>
        <xsl:value-of select="TransactionType"/>
      </TRANSACTIONTYPE>
      <TRANSACTIONCODE>
        <xsl:value-of select="TransactionCode"/>
      </TRANSACTIONCODE>
      <TRANSACTIONNUMBER>
        <xsl:value-of select="TransactionNumber"/>
      </TRANSACTIONNUMBER>
      <SEQUENCENUMBER>
        <xsl:value-of select="SequenceNumber"/>
      </SEQUENCENUMBER>
      <SKUDEFINITION>
        <COMPANY>
          <xsl:value-of select="Company"/>
        </COMPANY>
        <DIVISION>
          <xsl:value-of select="Division"/>
        </DIVISION>
        <SEASON/>
        <SEASONYEAR/>
        <STYLE>
          <xsl:value-of select="Style"/>
        </STYLE>
        <STYLESUFFIX/>
        <COLOR>
        <xsl:value-of select="Color"/>
        </COLOR>
        <COLORSUFFIX/>
        <SECDIMENSION/>
        <QUANTITY/>
        <SIZERANGECODE/>
        <SIZEDESC>
          <xsl:value-of select="SizeDesc"/>
        </SIZEDESC>
        <SKUID>
          <xsl:value-of select="SkuID"/>
        </SKUID>
      </SKUDEFINITION>
      </item>
    </xsl:template>
When i run my program i am getting the values only till the sequence number part and im not getting any values that is read in between <SKUDEFINITION> ..... </SKUDEFINITION>
I need help to sort this , kindly help me in this.
regs,
raja

I am not able to get a clue out of that, can Get Durairaj Athavan Raja in to loop for sorting this out.
I made changes to my transformation program , but still not getting the output of the components inside the
<SKUDefinition> , but when i debug the transformation i can able to see the output values for those components but when i get the values in the result table im not getting values of those components.
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
    <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
      <asx:values>
        <IPIX>
          <xsl:apply-templates select="//PIX"/>
        </IPIX>
      </asx:values>
    </asx:abap>
</xsl:template>
<xsl:template match="PIX">
    <item>
      <TRANSACTIONTYPE>
        <xsl:value-of select="TransactionType"/>
      </TRANSACTIONTYPE>
      <TRANSACTIONCODE>
        <xsl:value-of select="TransactionCode"/>
      </TRANSACTIONCODE>
      <TRANSACTIONNUMBER>
        <xsl:value-of select="TransactionNumber"/>
      </TRANSACTIONNUMBER>
      <SEQUENCENUMBER>
        <xsl:value-of select="SequenceNumber"/>
      </SEQUENCENUMBER>
      <xsl:for-each select="SKUDefinition">
      <SKUDEFINITION>
      <COMPANY>
          <xsl:value-of select="Company"/>
      </COMPANY>
      <DIVISION>
          <xsl:value-of select="Division"/>
      </DIVISION>
      <SEASON/>
      <SEASONYEAR/>
      <STYLE>
        <xsl:value-of select="Style"/>
      </STYLE>
      <STYLESUFFIX/>
      <COLOR>
        <xsl:value-of select="Color"/>
      </COLOR>
      <COLORSUFFIX/>
      <SECDIMENSION/>
      <QUANTITY/>
      <SIZERANGECODE/>
      <SIZEDESC>
          <xsl:value-of select="SizeDesc"/>
      </SIZEDESC>
      <SKUID>
          <xsl:value-of select="SkuID"/>
      </SKUID>
      </SKUDEFINITION>
      </xsl:for-each>
    </item>
</xsl:template>
</xsl:transform>
==================
Below is my main program
===================
TYPE-POOLS abap.
CONSTANTS gs_file TYPE string VALUE 'C:\XMLABAP1.xml'.
This is the structure for the data from the XML file
TYPES: BEGIN OF ty_text,
         TransactionType(3) type n,
         TransactionCode(2) type n,
         TransactionNumber(7) type n,
         SequenceNumber(5) type n,
         Company(3) type c,
         Division(3) type c,
         Season(3) type c,
         SeasonYear(4) type c,
         Style(8) type c,
         Color(3) type c,
         SecDimension(3) type c,
         Quality(3) type n,
         SizeRangeCode(2) type c,
         SizeDesc(1) type c,
         SkuID(10) type c,
       END OF ty_text.
Table for the XML content
DATA: gt_itab       TYPE STANDARD TABLE OF char2048.
data: xmlstr        TYPE XSTRING.
Table and work ares for the data from the XML file
DATA: gt_person     TYPE STANDARD TABLE OF ty_text,
      gs_person     TYPE ty_text.
Result table that contains references
of the internal tables to be filled
DATA: gt_result_xml TYPE abap_trans_resbind_tab,
      gs_result_xml TYPE abap_trans_resbind.
For error handling
DATA: gs_rif_ex     TYPE REF TO cx_root,
      gs_var_text   TYPE string.
Get the XML file from your client
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename                = gs_file
CHANGING
    data_tab                = gt_itab
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    not_supported_by_gui    = 17
    error_no_gui            = 18
    OTHERS                  = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Fill the result table with a reference to the data table.
Within the XSLT stylesheet, the data table can be accessed with
"IPERSON".
GET REFERENCE OF gt_person INTO gs_result_xml-value.
gs_result_xml-name = 'IPIX'.
APPEND gs_result_xml TO gt_result_xml.
Perform the XSLT stylesheet
TRY.
    CALL TRANSFORMATION ZAUM_MANH_SYNC_RPT
    SOURCE XML XMLSTR
    RESULT (gt_result_xml).
CATCH cx_root INTO gs_rif_ex.
    gs_var_text = gs_rif_ex->get_text( ).
    MESSAGE gs_var_text TYPE 'E'.
ENDTRY.
Now let's see what we got from the file
LOOP AT gt_person INTO gs_person.
WRITE: / 'Transaction Type:', gs_person-TransactionType.
WRITE: / 'Transaction Code :', gs_person-TransactionCode.
WRITE: / 'Transaction Number :', gs_person-TransactionNumber.
   WRITE: / 'SequenceNumber :', gs_person-SequenceNumber.
   WRITE: / 'Company : ', gs_person-Company.
WRITE : /.
ENDLOOP. "gt_person.

Collect data from a dynamic XML file into multiple internal tables

I need to convert the XML file into multiple internal tables. I tried many links and posts in SDN but still was facing difficulty in achieving this. Can some one tell me where I am going wrong.
My XML file is of the following type.It is very complex and the dynamice.
The following tags occur more than once in the XML file. The "I" and "L" tags and its child tags can occur ones or more than once for each XML file and it is not constant. i.e in one file they can occur 1 time and in another they can occur 100 times.
"I" and "L" are child tags of <C>
<I>
       <J>10</J>
         <K>EN</K>
</I>
<L>
         <J>20</J>
          <N>BB</N>
</L>
Tags <C> and <F> occur only ones for each XML file. <C> is the child tag of "A" and "F" is the child tag of <C>.
I need to collect <D>, <E> in one internal table ITAB.
I need to collect <G>, <H> in one internal table JTAB.
I need to collect <J>, <K> in one internal table KTAB.
I need to collect <J>, <N> in one internal table PTAB.
Below is the complete XML file.
?xml version="1.0" encoding="iso-8859-1" ?>
<A>
    <B/>
    <C>
       <D>RED</D>
       <E>999</E>
    <F>
       <G>TRACK</G>
       <H>PACK</H>
    </F>
    <I>
       <J>10</J>
       <K>EN</K>
    </I>
    <I>
       <J>20</J>
       <K>TN</K>
    </I>
    <I>
       <J>30</J>
       <K>KN</K>
    </I>
    <L>
       <J>10</J>
       <N>AA</N>
    </L>
    <L>
       <J>20</J>
       <N>BB</N>
    </L>
    <L>
       <J>30</J>
       <N>CC</N>
    </L>
    </C>
</A>
With the help of SDN I am able to gather the values of <D> <E> in one internal table.
Now if I need to gather
<G>, <H> in one internal table JTAB.
<J>, <K> in one internal table KTAB.
<J>, <N> in one internal table PTAB.
I am unable to do. I am following XSLT transformation method. If some one has some suggestions. Please help.
Here is my ABAP program
TYPE-POOLS abap.
CONSTANTS gs_file TYPE string VALUE 'C:\TEMP\ABCD.xml'.
* This is the structure for the data from the XML file
TYPES: BEGIN OF ITAB,
         D(10) TYPE C,
         E(10) TYPE C,
       END OF ITAB.
* Table for the XML content
DATA: gt_itab       TYPE STANDARD TABLE OF char2048.
* Table and work ares for the data from the XML file
DATA: gt_ITAB     TYPE STANDARD TABLE OF ts_ITAB,
      gs_ITAB     TYPE ts_ITAB.
* Result table that contains references
* of the internal tables to be filled
DATA: gt_result_xml TYPE abap_trans_resbind_tab,
      gs_result_xml TYPE abap_trans_resbind.
* For error handling
DATA: gs_rif_ex     TYPE REF TO cx_root,
      gs_var_text   TYPE string.
* Get the XML file from your client
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename                = gs_file
CHANGING
    data_tab                = gt_itab1
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    not_supported_by_gui    = 17
    error_no_gui            = 18
    OTHERS                  = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "IITAB".
GET REFERENCE OF gt_shipment INTO gs_result_xml-value.
gs_result_xml-name = 'IITAB'.
APPEND gs_result_xml TO gt_result_xml.
* Perform the XSLT stylesheet
TRY.
    CALL TRANSFORMATION zxslt
    SOURCE XML gt_itab1
    RESULT (gt_result_xml).
CATCH cx_root INTO gs_rif_ex.
    gs_var_text = gs_rif_ex->get_text( ).
    MESSAGE gs_var_text TYPE 'E'.
ENDTRY.
* Now let's see what we got from the file
LOOP AT gt_ITAB INTO gs_ITAB.
WRITE: / 'D:', gs_ITAB-D.
WRITE: / 'E :', gs_ITAB-E.
ENDLOOP.
Transformation
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
    <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
      <asx:values>
        <IITAB>
          <xsl:apply-templates select="//C"/>
        </IITAB>
      </asx:values>
    </asx:abap>
</xsl:template>
<item>
      <D>
        <xsl:value-of select="D"/>
      </D>
      <E>
        <xsl:value-of select="E"/>
      </E>
    </item>
</xsl:template>
</xsl:transform>
Now the above pgm and transformation work well and I am able to extract data into the ITAB. Now what changes should I make in transformation and in pgm to collect
<G>, <H> in one internal table JTAB.
<J>, <K> in one internal table KTAB.
<J>, <N> in one internal table PTAB.
Please help..i am really tring hard to figure this out. I am found lot of threads addressing this issue but not my problem.
Kindly help.
Regards,
VS

Hi Rammohan,
Thanks for the effort!
But I don't need to use GUI upload because my functionality does not require to fetch data from presentation server.
Moreover, the split command advised by you contains separate fields...f1, f2, f3... and I cannot use it because I have 164 fields. I will have to split into 164 fields and assign the values back to 164 fields in the work area/header line.
Moreover I have about 10 such work areas. so the effort would be ten times the above effort! I want to avoid this! Please help!
I would be very grateful if you could provide an alternative solution.
Thanks once again,
Best Regards,
Vinod.V

Upload XML file data into internal table

Hi,
I need help from you.
I am uploading XML file from Application server.
1.In application server under directory it may have several XML files and i need to upload all the XML files when we gave only directory name. So, what is the function module for that logic . If possible code also.
2.Once we get the files into some internal table we need to upload data from that files to internal table.
So what is the logic for that , if possible code also.
I am giving sample directory:
For example in this directory assume 3 xml files are there.
I need to upload those files and data from that in to internal table.
Thanks & Regards
VSR

Below code will give you an idea.
TYPE-POOLS: ixml. "iXML Library Types
*TABLES : rbkp.
TYPE DECLERATIION
TYPES: BEGIN OF type_tabpo,
ebeln TYPE ekko-ebeln, "PO document number
ebelp TYPE ekpo-ebelp, "PO line item
END OF type_tabpo.
TYPES: BEGIN OF type_ekbe,
belnr TYPE rbkp-belnr, "Invoice document
gjahr TYPE rbkp-gjahr, "fiscal year
END OF type_ekbe.
TYPES: BEGIN OF type_invoice,
belnr TYPE rbkp-belnr, "PO document number
gjahr TYPE rbkp-gjahr, "Fiscal Year
rbstat TYPE rbkp-rbstat, "invoice status
END OF type_invoice.
TYPES: BEGIN OF t_xml_line, "Structure for holding XML data
data(256) TYPE x,
END OF t_xml_line.
INTERNAL TABLE DECLERATIION
DATA: gi_tabpo TYPE STANDARD TABLE OF type_tabpo,
gi_ekbe TYPE STANDARD TABLE OF type_ekbe,
gi_invoice TYPE STANDARD TABLE OF type_invoice,
gi_bapiret2 TYPE STANDARD TABLE OF bapiret2.
DATA: l_ixml TYPE REF TO if_ixml,
l_streamfactory TYPE REF TO if_ixml_stream_factory.
DATA: l_xml_table TYPE TABLE OF t_xml_line, " XML Table of the structure
l_xml_line TYPE t_xml_line, " Record of structure t_xml_line
l_xml_table_size TYPE i. " XML table size
DATA: l_filename TYPE string.
WORK AREA DECLARATION
DATA: gw_tabpo TYPE type_tabpo,
gw_ekbe TYPE type_ekbe,
gw_invoice TYPE type_invoice,
gw_bapiret2 TYPE bapiret2.
BEGIN OF SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS: p_file TYPE pathintern LOWER CASE DEFAULT '/usr/sap/tmp/'.
Validation of XML file: Only DTD included in XML document is supported
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN.
To validate p_file is not initial
PERFORM sub_validate_file.
PERFORM sub_validate_path.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Request for filename for xml file from the application server
PERFORM sub_get_filename_appl USING p_file.
START OF SELECTION SCREEN
START-OF-SELECTION.
PERFORM sub_fetch_po_details.
PERFORM sub_get_invoice.
PERFORM sub_rel_invoice.
END OF SELECTION SCREEN
END-OF-SELECTION.
*& Form sub_validate_file
To Validate the file
FORM sub_validate_file .
IF p_file IS INITIAL.
MESSAGE e000. "specify the file path
ENDIF.
ENDFORM. " sub_validate_file
*& Form sub_get_filename_appl
form sub_get_filename_appl USING l_fname TYPE any.
DATA: l_fname TYPE filename-fileintern. " File name
*GET THE FILENAME FROM THE APPLICATION SERVER
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
EXPORTING
directory = l_fname
filemask = '*'
IMPORTING
serverfile = l_fname
EXCEPTIONS
canceled_by_user = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " sub_get_filename_appl
*& Form sub_fetch_po_details
To fetch the PO details from the application server
Format of file is XML
FORM sub_fetch_po_details .
TYPE DECLERATIION
l_ixml = cl_ixml=>create( ).
Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
PERFORM get_xml_table.
LOOP AT gi_tabpo INTO gw_tabpo.
WRITE:/ gw_tabpo.
ENDLOOP.
ENDFORM. " sub_fetch_po_details
*& Form get_xml_table
Read from the xml file
FORM get_xml_table .
Local variable declarations
DATA: l_len TYPE i,
l_len2 TYPE i,
l_tab TYPE tsfixml,
l_content TYPE string,
l_str1 TYPE string,
c_conv TYPE REF TO cl_abap_conv_in_ce,
l_itab TYPE TABLE OF string.
l_filename = p_file.
code to upload data from application server
OPEN DATASET l_filename FOR INPUT IN BINARY MODE.
IF sy-subrc 0.
WRITE:/ 'invalid file path'.
ENDIF.
DO.
READ DATASET l_filename INTO l_xml_line.
IF sy-subrc EQ 0.
APPEND l_xml_line TO l_xml_table.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET l_filename.
code to find the table size
DESCRIBE TABLE l_xml_table.
l_xml_table_size = ( sy-tleng ) * ( sy-tfill ).
*code to convert hexadecimal to XML
LOOP AT l_xml_table INTO l_xml_line.
c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data
replacement
= space ).
c_conv->read( IMPORTING data = l_content len = l_len ).
CONCATENATE l_str1 l_content INTO l_str1.
ENDLOOP.
l_str1 = l_str1+0(l_xml_table_size).
SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
LOOP AT l_itab INTO l_str1.
REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab IN
l_str1 WITH space.
ENDLOOP.
CALL TRANSFORMATION ('ID') " code to put in internal table
SOURCE XML l_str1
RESULT tab = gi_tabpo[].
ENDFORM. " get_xml_table

Generation of .ecs file and .xsd file

Hi,
I am working on the Acme-GlobalChips tutorial Query using File 1.0 protocol.
I have few question on that.
While creating the Business actions and Trading partner IN B2B we use two 850.ecs and 850.xsd.Can these be used for all the trading partners or they are partner specific.If not then do we develop it using Document Editor.
Moreover if after we create the .ecs using the tool can we generate the .xsd file using same tool.
I have this doubt because I used the .ecs file provide with the tutorial and used EDI file provide by some other partner it worked.I mean I was able to generate the EDI-Xml as payload in reports section of B2B.
Can some help me on this.
Regards
Lalit

Hi Lalit,
1. Yes. Different Trading partners can use the same Business action. However, you can also override the .ecs file and .xsd file as per your requirement.
2. We can also generate .xsd files using the Document editor.
Regards,
Dheeraj

Reading long text from excel file to an internal table

Hi
Can any body tell me how to read long text from excel file to an internal table.
When i am using this FM KCD_EXCEL_OLE_TO_INT_CONVERT then it is reading only 32 characters from each cell.
But in my excel sheet in one of the cell has very long text which i need to upload into a internal table.
may i know which FM or what logic i need to use for this problem.
Regards

Hi,
Here is an example program. It will upload an Excel file with two columns. You could also assign the Excel structure dynamically, but I wanted to keep the example simple. The main point is that the internal table (it_excel in this example) must match the Excel structure that you want to convert.
Remember, this is just an example to help you figure out how to properly use the technique. It will certainly need to be modified to fit your requirements, and as always there may be a better way to get the Excel converted... this is just one possibility that has worked for me in the past.
*& Report zexcel_upload_test                            *
REPORT zexcel_upload_test.
TYPE-POOLS: truxs.
TYPES: BEGIN OF ty_excel,
         col_a(10) TYPE n,
         col_b(35) TYPE c,
       END OF ty_excel.
DATA: l_data_tab         TYPE TABLE OF string,
      l_text_data        TYPE truxs_t_text_data,
      l_gui_filename     TYPE string,
      it_excel           TYPE TABLE OF ty_excel.
FIELD-SYMBOLS: <wa_excel> TYPE ty_excel.
PARAMETERS: p_file TYPE rlgrap-filename.
* Pass the file name in the correct format
l_gui_filename = p_file.
* Upload data from PC
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename                = l_gui_filename
    filetype                = 'ASC'
    has_field_separator     = 'X'
CHANGING
    data_tab                = l_data_tab
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    OTHERS                  = 17.
IF sy-subrc <> 0.
*   MESSAGE ...
EXIT.
ENDIF.
* Convert from Excel into the appropriate itab
l_text_data[] = l_data_tab[].
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
    i_field_seperator    = 'X'
    i_tab_raw_data       = l_text_data
    i_filename           = p_file
TABLES
    i_tab_converted_data = it_excel
EXCEPTIONS
    conversion_failed    = 1
    OTHERS               = 2.
IF sy-subrc <> 0.
*   MESSAGE ...
EXIT.
ENDIF.
LOOP AT it_excel ASSIGNING <wa_excel>.
* Do something here...
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM filename_get CHANGING p_file.
*       FORM filename_get                                             *
FORM filename_get CHANGING p_in_file TYPE rlgrap-filename.
DATA: l_in_file TYPE string,
        l_filetab TYPE filetable,
        wa_filetab TYPE LINE OF filetable,
        l_rc       TYPE i,
        l_action   TYPE i,
        l_init_dir TYPE string.
* Set the initial directory to whatever you want it to be
l_init_dir = 'C:\'.
* Call the file open dialog without multiselect
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title            = 'Load file'
      default_extension       = '.XLS'
      default_filename        = l_in_file
      initial_directory       = l_init_dir
      multiselection          = 'X'
    CHANGING
      file_table              = l_filetab
      rc                      = l_rc
      user_action             = l_action
    EXCEPTIONS
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      OTHERS                  = 4.
IF sy-subrc <> 0.
    REFRESH l_filetab.
ENDIF.
* Read the selected filename
READ TABLE l_filetab INTO wa_filetab INDEX 1.
IF sy-subrc = 0.
    p_in_file = wa_filetab-filename.
ENDIF.
ENDFORM.                    " filename_get
Regards,
Jamie

I have problem of uploading excel file to my internal table

Hi,
I trying to upload data from excel file to my internal table and when i tried to debug the program and check the data in internal table and iam gettin # in all the fields and the data in not populated in internal table , as we are using 4.0b version and we are using UPLOAD FUNCTION.
        BUKRS(4) TYPE C,
         PONO(8) TYPE C,
         GRNNO(8) TYPE C,
         DELNOTE(16) TYPE C,
         RECPTDT(10) TYPE C,
         SUPPCODE(20) TYPE C,
          RECPT(12) TYPE C,
          GLACCT(10) TYPE C,
         CCTR(6) TYPE C,
CALL FUNCTION 'UPLOAD'
    TABLES DATA_TAB = STRU.
IF SY-SUBRC NE 0.
    WRITE: /'Data file error'.
ENDIF.
i am using the same sequeuence in the above structure in excel.

Hi KODAMANCHILI,
Refer following link :
http://help.sap.com/saphelp_40b/helpdata/en/fc/eb3d9d358411d1829f0000e829fbfe/frameset.htm
This will surely solve your problem.
Regards,
Vivek

Transfer IDOC File in a Internal Table

Hi all,
I need to Transfer IDOC File in a Internal Table.
Anybody have any idea how can I do this???
Regards,

HI,
is the IDoc exist in SAP?if IDoc exist in SAP you can use one function module to read the idoc and store tha content in internal table.
IDOC_READ_COMPLETELY function module will read the specified idoc number.you can retrieve the control records ,status records and the data record of the idoc.for this you have to declare 3 internal tables (check the function modules for the type of inerna table).you can then loop the internal table and read the data.let us know if u have any problems
regards
shibu

Facing problem in xml schema xsd file registration

Hi,
i am facing problem in xml schema xsd file registration when
the number of column is more. It is showing persing error.
if i am deleting few column from xsd file . It is working otherwise
showing error. Is there any solution for that please suggest me.
The Error is
ORA-31011:XML parsing failed
ORA_19202: Error occurred in XML processing
LPX-00230 : (message vary time to time-like invalid tag ending etc.)
Regards
Manoranjan
and thanks in advance

Where is you XML coming from. Are you sure it's valid. If you are hard coding it as a SQL String constant are you hitting the 4k / 32K limit on the size of SQL / PL/SQL constant. Have you tried loading the content from a bfile..

Upload a .CSV File into an Internal table

Hi,
What are the parameters to be filled into the Function Modules "GUI_UPLOAD" and "ALSM_EXCEL_TO_INTERNAL_TABLE" to Upload a .CSV File into an internal table.
Please send a sample code to support this....
Regards,
Aadhi.

Hi,
        Check the below code.
TYPE-POOLS: truxs.
TYPES:
BEGIN OF ty_line,
    vbeln LIKE vbap-vbeln,
    posnr LIKE vbap-posnr,
END OF ty_line.
*data: ty_Lines TYPE STANDARD TABLE of ty_Line WITH DEFAULT KEY.
DATA: itab   TYPE STANDARD TABLE OF ty_line WITH DEFAULT KEY.
DATA: itab1 TYPE truxs_t_text_data.
SELECT
vbeln
posnr
UP TO 10 ROWS
FROM vbap
INTO TABLE itab.
CALL FUNCTION 'SAP_CONVERT_TO_CSV_FORMAT'
EXPORTING
    i_field_seperator    = ';'
TABLES
    i_tab_sap_data       = itab
CHANGING
    i_tab_converted_data = itab1
EXCEPTIONS
    conversion_failed    = 1
    OTHERS               = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename = 'd:\TEMP\test1.txt'
TABLES
    data_tab = itab1
EXCEPTIONS
    OTHERS   = 1.
IF sy-subrc eq 0.
WRITE: 'Data downloaded successfully'.
ENDIF.
DATA: BEGIN OF IEXCEL OCCURS 0.
      INCLUDE STRUCTURE ALSMEX_TABLINE.
DATA: END OF IEXCEL.
PARAMETERS: FILENM   LIKE rlgrap-filename MEMORY ID M01,
            NOHEADER AS CHECKBOX.
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
exporting
    filename                      = FILENM
    i_begin_col                   = 1
    i_begin_row                  = 1
    i_end_col                     = 100
    i_end_row                     = 30000
tables
    intern                        = IEXCEL
EXCEPTIONS
    INCONSISTENT_PARAMETERS       = 1
    UPLOAD_OLE                    = 2
    OTHERS                        = 3.
if sy-subrc <> 0.
   WRITE: / 'EXCEL UPLOAD FAILED ', FILENM, SY-SUBRC.
endif.

Upload an Excel file into an Internal Table

Hi,
I want to upload an Excel file into an internal table but it doesn't work. I'd appreciate if someone could tell me what is wrong.
My excel file has the following format:
      Col1 Col2
Row1    1    2
Row2    2    3
Row3    3    4
And the report code is the following one:
REPORT ZFI_PROKON_PROCESOS.
DATA: BEGIN OF itab OCCURS 0,
        num1(1),
        num2(1).
DATA: END OF itab.
PARAMETERS: p_file LIKE rlgrap-filename obligatory.
AT SELECTION-SCREEN.
AT SELECTION-SCREEN on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
       EXPORTING
            static    = 'X'
       CHANGING
            file_name = p_file.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
     EXPORTING
          FILENAME                = p_file
          I_BEGIN_COL             = 1
          I_BEGIN_ROW             = 1
          I_END_COL               = 2
          I_END_ROW               = 5
     TABLES
          INTERN                  = itab
    EXCEPTIONS
         INCONSISTENT_PARAMETERS = 1
         UPLOAD_OLE              = 2
         OTHERS                  = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT itab.
WRITE: / itab-num1, 10 itab-num2.
ENDLOOP.
Thanks in advance,
Gerard

Try function module
ALSM_EXCEL_TO_INTERNAL_TABLE
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       exporting
            filename                = p_path
            i_begin_col             = 1
            i_begin_row             = 2
            i_end_col               = 70
            i_end_row               = 10000
       tables
            intern                  = i_excel
       exceptions
            inconsistent_parameters = 1
            upload_ole              = 2
            others                  = 3.
P_PATH is file name with path.
I_EXCEL is internal table to store data.
declaration is "i_excel like structure alsmex_tabline"
then loop at i_Excel and populate your table
for eg
loop at i_excel.
    case i_excel-col.
      when '0001'.
        i_data-compcode              = i_excel-value.
      when '0002'.
        i_data-rcpttyp               = i_excel-value.
      when '0003'.
        i_data-pocimpro              = i_excel-value.
      when '0004'.
        i_data-tranno                = i_excel-value.
      when '0005'.
        i_data-msrpo                 = i_excel-value.
      when '0006'.
        i_data-mporel                = i_excel-value.
    endcase.
    at end of row.
      append i_data.
      clear i_data.
    endat.
endloop.

Header data and item data into same internal table

Hi Experts,
I WANT TO KNOW THE LOGIC TO POPULATE HEADER DATA AND ITEM DATA INTO SAME INTERNAL TABLE AND AGAIN DOWNLOAD THE SAME TO EXCEL FILE .Output file should be displayed like this format
Header1 rectyp ,hdnum ,sbank ,bankl ,accnr , paytp , crda ,iso.
Item1 : rectyp ,valut ,cknum ,amount,bankl,accnr,pdate,bnktc.
Item2 : rectyp ,valut ,cknum ,amount,bankl,accnr,pdate,bnktc.
Header2: rectyp ,hdnum ,sbank ,bankl ,accnr , paytp , crda ,iso.
Item1 : rectyp ,valut ,cknum ,amount,bankl,accnr,pdate,bnktc.
Thanks
Moderator message: Please do not use all upper case in the future.
Edited by: Thomas Zloch on May 12, 2010 3:10 PM

Hi,
for example we have 3 internal tables
1> it_header 2>it_items 3>it_final (which contains all the header and item fields)
once it_header it_items are filled
loop at it_items.
read table it_header with key xyz = it_item-xyz.
if sy-subrc = 0.
here move all the header fields to it_final like below.
it_final -xfield = it_header-xfield.
endif.
here move all the item fields to it_final like below.
it_final -yfield = it_item-yfield.
append it_final.
clear it_final.
endloop.
now header and item fileds will be fillled in it_item

External dependency on remote dtd and xsd files

The question bugs me for years, please help.
Should we download external dtd and xsd files declared for web.xml and faces-config.xml and pack them in the war files to eliminate the external dependency.
e.g.
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd
http://java.sun.com/dtd/web-facesconfig_1_0.dtd
Thanks

Hi Srikanth,
Have you done this?
SAP HELP
<i>You want to import an XSD document myMessage to the Integration Repository; this document references three other XSD documents myStr1, myStr2, and myStr3 by using the <include> statement. One option is to first import myMessage. The External References tab page then shows that three documents are referenced and that these documents are not yet in the Integration Repository. Next, create further external definitions for myStr1, myStr2, and myStr3 in the same namespace and specify the source for each of these documents. If the source is not contained in the document itself, you will find it in the referencing document. If you refresh the display of the external definition for myMessage, the External References tab page shows that the documents have been found in the Integration Repository. You can then navigate to the other referenced external definitions in the Integration Repository by double clicking.</i>
Also, try activating just in case you haven't.
Regards
Vijaya

XML and XSD file to an internal table

Similar Messages

Maybe you are looking for