XML AS3 Problem
I'm developing an elearning course for learning MS EXCEL.
In the course, I have Next and Back Buttons to navigate between lessons.
Each lesson has number of tasks (maximum of 3), which are buttons at the left side.
and here is part of the XML file:
<excel>
<chapter id="1" title="">
<screen title="lesson">
<swf>EXCEL/CH01/CH01_S01.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Choose a lesson</prompt>
</screen>
<screen title="lesson" tasks="3">
<swf>EXCEL/CH01/CH01_S02.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
<screen title="lesson01task01">
<swf>EXCEL/CH01/CH01_S03.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>What's Excel?</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
<screen title="lesson01task02">
<swf>EXCEL/CH01/CH01_S04.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>What's Excel?</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
<screen title="lesson01task03">
<swf>EXCEL/CH01/CH01_S05.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>What's Excel?</rtitle>
<prompt>Open the Microsoft Excel</prompt>
</screen>
<screen title="lesson" tasks="1">
<swf>EXCEL/CH01/CH01_S06.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
<screen title="lesson02task01">
<swf>EXCEL/CH01/CH01_S07.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Become Familiar with Excel</rtitle>
<prompt> Roll mouse over each icon to recognize its name</prompt>
</screen>
<screen title="lesson" tasks="1">
<swf>EXCEL/CH01/CH01_S08.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
<screen title="lesson03task01">
<swf>EXCEL/CH01/CH01_S09.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Create a workbook</rtitle>
<prompt> Follow the following Instructions</prompt>
</screen>
<screen title="lesson" tasks="1">
<swf>EXCEL/CH01/CH01_S10.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
<screen title="lesson04task01">
<swf>EXCEL/CH01/CH01_S11.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Modify a workbook</rtitle>
<prompt> Create a new workbook</prompt>
</screen>
<screen title="lesson" tasks="1">
<swf>EXCEL/CH01/CH01_S12.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
<screen title="lesson05task01">
<swf>EXCEL/CH01/CH01_S13.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Modify a worksheet</rtitle>
<prompt> Follow the Instructions</prompt>
</screen>
<screen title="lesson" tasks="3">
<swf>EXCEL/CH01/CH01_S14.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
<screen title="lesson06task01">
<swf>EXCEL/CH01/CH01_S15.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Customizing the Excel Window</rtitle>
<prompt></prompt>
</screen>
<screen title="lesson06task02">
<swf>EXCEL/CH01/CH01_S16.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Customizing the Excel Window</rtitle>
<prompt>Follow the Instructions</prompt>
</screen>
<screen title="lesson06task03">
<swf>EXCEL/CH01/CH01_S17.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Customizing the Excel Window</rtitle>
<prompt>Follow the Instructions</prompt>
</screen>
<screen title="">
<swf>EXCEL/CH01/CH01_S18.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Customizing the Excel Window</rtitle>
<prompt>Follow the Instructions</prompt>
</screen>
<screen title="lesson">
<swf>EXCEL/CH01/CH01_S19.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Test yourself</rtitle>
<prompt>Follow the Instructions</prompt>
</screen>
<screen title="lesson">
<swf>EXCEL/CH01/CH01_S19.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Test yourself</rtitle>
<prompt>Follow the Instructions</prompt>
</screen>
</chapter>
<chapter id="2" title="">
I load the info and swf files from XML into arrays.
I'd like when the user click on Next and Back buttons, he navigate only between screens that has title of "lesson".
and when the screen has attribute of tasks, tasks buttons appear (number of task buttons is determined by the number in the tasks attribute).
When the user click on the tasks button, he navigate to screens that comes after the lesson.
I handled some of them but I can't handle the others.
Here is the code:
page.task1.visible = false;
page.task2.visible = false;
page.task3.visible = false;
var excel:XML;
var len:Number;
var swfArray:Array=new Array();
var leftArray:Array = new Array();
var rightArray:Array = new Array();
var promptArray:Array = new Array();
var xmlLoader:URLLoader = new URLLoader();
var xmlReq:URLRequest = new URLRequest("excel.xml");
xmlLoader.load(xmlReq);
xmlLoader.addEventListener(Event.COMPLETE, onXMLLoad);
var task:Array = new Array(page.task1, page.task2, page.task3);
function onXMLLoad(e:Event):void
excel = new XML(xmlLoader.data);
len = excel.chapter.screen.length();
//trace(excel.chapter.screen.length());
for(var i:Number = 0; i < len; i++)
swfArray.push(excel.chapter.screen.swf[i].text());
leftArray.push(excel.chapter.screen.ltitle[i].text());
rightArray.push(excel.chapter.screen.rtitle[i].text());
promptArray.push(excel.chapter.screen.prompt[i].text());
page.left_txt.text = leftArray[0];
page.right_txt.text = rightArray[0];
page.prompt_txt.text = promptArray[0];
//trace(leftArray.length);
//trace(swfArray);
var swfLoader:Loader = new Loader();
swfLoader.load(new URLRequest("EXCEL/CH01/CH01_S01.swf"));
swfLoader.x = 105;
swfLoader.y = 130;
page.addChild(swfLoader);
var n:Number = 0;
function loadScreen(strURL:String):void
swfLoader.unload();
swfLoader.load(new URLRequest(strURL));
swfLoader.x = 105;
swfLoader.y = 130;
page.addChild(swfLoader);
page.left_txt.text = leftArray[n];
page.right_txt.text = rightArray[n];
page.prompt_txt.text = promptArray[n];
if(excel.chapter.screen[n].@tasks != undefined)
for(var m:Number = 0; m < excel.chapter.screen[n].@tasks; m++)
task[m].visible = true;
task[m].addEventListener(MouseEvent.CLICK, onTask_btns);
else
for(var t:Number = 0; t < task.length; t++)
task[t].visible = false;
function onTask_btns(e:MouseEvent):void
if(e.target == task[0])
loadScreen(swfArray[n+1]);
else if(e.target == task[1])
loadScreen(swfArray[n+2]);
else if(e.target == task[2])
loadScreen(swfArray[n+3]);
function onNextButton(e:MouseEvent):void
if(n < (swfArray.length - 1))
n += 1;
else
n = 0
loadScreen(swfArray[n]);
function onPrevButton(e:MouseEvent):void
if(n > 0)
n -= 1;
else
n = (swfArray.length - 1);
loadScreen(swfArray[n]);
page.next_btn.addEventListener(MouseEvent.CLICK, onNextButton);
page.prev_btn.addEventListener(MouseEvent.CLICK, onPrevButton);
Waiting for your help.
I'm developing an elearning course for learning MS EXCEL.
In the course, I have Next and Back Buttons to navigate between lessons.
Each lesson has number of tasks (maximum of 3), which are buttons at the left side.
and here is part of the XML file:
<excel>
<chapter id="1" title="">
<screen title="lesson">
<swf>EXCEL/CH01/CH01_S01.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Choose a lesson</prompt>
</screen>
<screen title="lesson" tasks="3">
<swf>EXCEL/CH01/CH01_S02.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
<screen title="lesson01task01">
<swf>EXCEL/CH01/CH01_S03.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>What's Excel?</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
<screen title="lesson01task02">
<swf>EXCEL/CH01/CH01_S04.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>What's Excel?</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
<screen title="lesson01task03">
<swf>EXCEL/CH01/CH01_S05.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>What's Excel?</rtitle>
<prompt>Open the Microsoft Excel</prompt>
</screen>
<screen title="lesson" tasks="1">
<swf>EXCEL/CH01/CH01_S06.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
<screen title="lesson02task01">
<swf>EXCEL/CH01/CH01_S07.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Become Familiar with Excel</rtitle>
<prompt> Roll mouse over each icon to recognize its name</prompt>
</screen>
<screen title="lesson" tasks="1">
<swf>EXCEL/CH01/CH01_S08.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
<screen title="lesson03task01">
<swf>EXCEL/CH01/CH01_S09.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Create a workbook</rtitle>
<prompt> Follow the following Instructions</prompt>
</screen>
<screen title="lesson" tasks="1">
<swf>EXCEL/CH01/CH01_S10.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
<screen title="lesson04task01">
<swf>EXCEL/CH01/CH01_S11.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Modify a workbook</rtitle>
<prompt> Create a new workbook</prompt>
</screen>
<screen title="lesson" tasks="1">
<swf>EXCEL/CH01/CH01_S12.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
<screen title="lesson05task01">
<swf>EXCEL/CH01/CH01_S13.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Modify a worksheet</rtitle>
<prompt> Follow the Instructions</prompt>
</screen>
<screen title="lesson" tasks="3">
<swf>EXCEL/CH01/CH01_S14.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
<screen title="lesson06task01">
<swf>EXCEL/CH01/CH01_S15.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Customizing the Excel Window</rtitle>
<prompt></prompt>
</screen>
<screen title="lesson06task02">
<swf>EXCEL/CH01/CH01_S16.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Customizing the Excel Window</rtitle>
<prompt>Follow the Instructions</prompt>
</screen>
<screen title="lesson06task03">
<swf>EXCEL/CH01/CH01_S17.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Customizing the Excel Window</rtitle>
<prompt>Follow the Instructions</prompt>
</screen>
<screen title="">
<swf>EXCEL/CH01/CH01_S18.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Customizing the Excel Window</rtitle>
<prompt>Follow the Instructions</prompt>
</screen>
<screen title="lesson">
<swf>EXCEL/CH01/CH01_S19.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Test yourself</rtitle>
<prompt>Follow the Instructions</prompt>
</screen>
<screen title="lesson">
<swf>EXCEL/CH01/CH01_S19.swf</swf>
<ltitle>Setting Up a Workbook</ltitle>
<rtitle>Test yourself</rtitle>
<prompt>Follow the Instructions</prompt>
</screen>
</chapter>
<chapter id="2" title="">
I load the info and swf files from XML into arrays.
I'd like when the user click on Next and Back buttons, he navigate only between screens that has title of "lesson".
and when the screen has attribute of tasks, tasks buttons appear (number of task buttons is determined by the number in the tasks attribute).
When the user click on the tasks button, he navigate to screens that comes after the lesson.
I handled some of them but I can't handle the others.
Here is the code:
page.task1.visible = false;
page.task2.visible = false;
page.task3.visible = false;
var excel:XML;
var len:Number;
var swfArray:Array=new Array();
var leftArray:Array = new Array();
var rightArray:Array = new Array();
var promptArray:Array = new Array();
var xmlLoader:URLLoader = new URLLoader();
var xmlReq:URLRequest = new URLRequest("excel.xml");
xmlLoader.load(xmlReq);
xmlLoader.addEventListener(Event.COMPLETE, onXMLLoad);
var task:Array = new Array(page.task1, page.task2, page.task3);
function onXMLLoad(e:Event):void
excel = new XML(xmlLoader.data);
len = excel.chapter.screen.length();
//trace(excel.chapter.screen.length());
for(var i:Number = 0; i < len; i++)
swfArray.push(excel.chapter.screen.swf[i].text());
leftArray.push(excel.chapter.screen.ltitle[i].text());
rightArray.push(excel.chapter.screen.rtitle[i].text());
promptArray.push(excel.chapter.screen.prompt[i].text());
page.left_txt.text = leftArray[0];
page.right_txt.text = rightArray[0];
page.prompt_txt.text = promptArray[0];
//trace(leftArray.length);
//trace(swfArray);
var swfLoader:Loader = new Loader();
swfLoader.load(new URLRequest("EXCEL/CH01/CH01_S01.swf"));
swfLoader.x = 105;
swfLoader.y = 130;
page.addChild(swfLoader);
var n:Number = 0;
function loadScreen(strURL:String):void
swfLoader.unload();
swfLoader.load(new URLRequest(strURL));
swfLoader.x = 105;
swfLoader.y = 130;
page.addChild(swfLoader);
page.left_txt.text = leftArray[n];
page.right_txt.text = rightArray[n];
page.prompt_txt.text = promptArray[n];
if(excel.chapter.screen[n].@tasks != undefined)
for(var m:Number = 0; m < excel.chapter.screen[n].@tasks; m++)
task[m].visible = true;
task[m].addEventListener(MouseEvent.CLICK, onTask_btns);
else
for(var t:Number = 0; t < task.length; t++)
task[t].visible = false;
function onTask_btns(e:MouseEvent):void
if(e.target == task[0])
loadScreen(swfArray[n+1]);
else if(e.target == task[1])
loadScreen(swfArray[n+2]);
else if(e.target == task[2])
loadScreen(swfArray[n+3]);
function onNextButton(e:MouseEvent):void
if(n < (swfArray.length - 1))
n += 1;
else
n = 0
loadScreen(swfArray[n]);
function onPrevButton(e:MouseEvent):void
if(n > 0)
n -= 1;
else
n = (swfArray.length - 1);
loadScreen(swfArray[n]);
page.next_btn.addEventListener(MouseEvent.CLICK, onNextButton);
page.prev_btn.addEventListener(MouseEvent.CLICK, onPrevButton);
Waiting for your help.
Similar Messages
-
WIJ 20002 xml Parser Problem - Rich Client
Hi,
I have a problem with the rich client on a new installation:
Business Objects Enterprise XI 3.1 SP3 on Windows 2008 Standard.
If I connect with the rich client "import document"is disabled.
if I try to create a new document from the rich client it returns the error below (I used the rich client on two workstations):
WIJ 20002
Version: null
Analisi dello stack:
java.lang.RuntimeException: java.lang.RuntimeException: XML parser problem:
XMLJaxpParser.parse(): Element type "ABOUT_Patentnumbers" must be followed by either attribute specification, ">" or "/>".
at com.businessobjects.wp.xml.jaxp.XMLJaxpParser.parse (Unknown Source)
at.com.businessobjects.webi.richclient.XMLviaOccaRC.getServerConfiguration (Unknown Source)
Have you any solution?The fixpack 3.5 client resolves the problem.
-
I'm exporting a xml document that I'm creating dynamically in my application.
I'm having the following problems (working with 30M.2).
1)
It's not possible to edit a DTD (or creating one run time) so I have to write a
template doc XML to have it.
I'm afraid that this is a costraint on the DOM1 so ...
2)
Once I complete the construction of the doc, I need to write it down (let's say
on a file, but could be also in memory to send it on http).
When I write it (using exportdocument function) I just find the root element
with all it's children, no haeder (<?xml version="1.0" ?><!DOCUMENT ...>) so I
cannot have the dtd information on the stream, and cannot enforce validation of
the doc when someone read it afterwards.
I admit I'm new of the subject, but or I miss something or something is wrong:
having trouble to get a dtd and not being able to code it's information.
Anyone has some ideas?
TIA
LucaI'm interested in DTDs. For example in the reported situation, why, if you
know you've created a valid XML document would you want to give a DTD to
someone at the other end? If someone has a DTD at the other end and want to
use it to validate your XML then fine but if you create the XML and are
controlling the format then wouldn't they just assume the XML correct if the
DTD wasn't being controlled by a 3rd party or themselves?
DTDs don't help you create a document but just validate it, I'd thought. If
there is more to DTDs I'd appreciate if someone felt like ellaborating.
Thanks.
Matthew Middleton
OrYx Software Consultant
Lawpoint Pty. Limited
A Solution 6 Company
Ph: +61 2 9239 4972
Fax: +61 2 9239 4900
E-mail matthewmwriteme.com
----- Original Message -----
From: Luca Gioppo <Luca.GioppoCSI.IT>
To: <forte-userslists.xpedior.com>
Sent: Tuesday, August 08, 2000 8:24 PM
Subject: (forte-users) XML - ExportDocument problem
>
>
I'm exporting a xml document that I'm creating dynamically in myapplication.
I'm having the following problems (working with 30M.2).
1)
It's not possible to edit a DTD (or creating one run time) so I have towrite a
template doc XML to have it.
I'm afraid that this is a costraint on the DOM1 so ...
2)
Once I complete the construction of the doc, I need to write it down(let's say
on a file, but could be also in memory to send it on http).
When I write it (using exportdocument function) I just find the rootelement
with all it's children, no haeder (<?xml version="1.0" ?><!DOCUMENT ...>)so I
cannot have the dtd information on the stream, and cannot enforcevalidation of
the doc when someone read it afterwards.
I admit I'm new of the subject, but or I miss something or something iswrong:
having trouble to get a dtd and not being able to code it's information.
Anyone has some ideas?
TIA
Luca
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com -
I want to generate a xml file with text from a txt file but i have problems with special characters such as &, <... I'd like to know if there�s any class or library to filter the text in order to generate my xml without problems.
Thank you.Use JDOM to generate your XML. It will worry about escaping issues for you.
Here's a (probably rather inelegant) example for you to play around with:
import javax.xml.parsers.*;
import javax.xml.transform.*;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.*;
public class DateBoom {
public static void main(String[] args)
throws Exception
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
String dodgyText = "< & '";
Document document = builder.newDocument();
Element root = document.createElement("root");
root.setAttribute("dodgy",dodgyText);
document.appendChild(root);
Element child = document.createElement("child");
root.appendChild(child);
child.appendChild(document.createTextNode(dodgyText));
Transformer transform = TransformerFactory.newInstance().newTransformer();
Source source = new DOMSource(document);
Result result = new StreamResult(System.out);
transform.transform(source,result);
}Your alternative is to use something like String regular expressions (regex) to do this manually, but the XML oriented libraries will catch more corner cases than you're likely to anticipate, making them more reliable. -
!DOCTYPE !ENTITY war file xml splitting problem
Hi,
I am trying to split a file - struts-config.xml - which eventually gets
located into my war file.
Here is the xml file.
<!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts
Configuration 1.0//EN"
"http://jakarta.apache.org/struts/dtds/struts-config_1_0.dtd"
<!ENTITY struts_FormBeans SYSTEM "./struts_FormBeans.xml">
<!ENTITY struts_GlobalForwards SYSTEM
"./struts_GlobalForwards.xml">
<!ENTITY struts_ActionMappings SYSTEM
"./struts_ActionMappings.xml">
>
The problem that I run into is that the xml parser at deploy time cannot
locate the struts_FormBeans.xml file which is located in the same place as
the struts-config.xml file.
Does anyone know a way to tell it to look in the war file?
or Does anyone know a better place to post a question like this?
Thanks in advance!!The problem that I run into is that the xml parser at deploy time cannot
locate the struts_FormBeans.xml file which is located in the same place as
the struts-config.xml file.Uh-uh. Ran into this also.
Does anyone know a way to tell it to look in the war file?Not me, but I wish I could.
or Does anyone know a better place to post a question like this?This seems more like a Struts issue to me. Look here:
http://marc.theaimsgroup.com/?l=struts-user&m=100016330124990
and follow the thread. Someone suggested a patch to the ActionServlet, I
haven't tried it yet. It sounds good and will probably do what you want.
--Renaud
"IH" <[email protected]> wrote in message news:[email protected]..
Hi,
I am trying to split a file - struts-config.xml - which eventually gets
located into my war file.
Here is the xml file.
<!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts
Configuration 1.0//EN"
"http://jakarta.apache.org/struts/dtds/struts-config_1_0.dtd"
<!ENTITY struts_FormBeans SYSTEM "./struts_FormBeans.xml">
<!ENTITY struts_GlobalForwards SYSTEM
"./struts_GlobalForwards.xml">
<!ENTITY struts_ActionMappings SYSTEM
"./struts_ActionMappings.xml">
>
The problem that I run into is that the xml parser at deploy time cannot
locate the struts_FormBeans.xml file which is located in the same place as
the struts-config.xml file.
Does anyone know a way to tell it to look in the war file?
or Does anyone know a better place to post a question like this?
Thanks in advance!! -
XML/AS3 Lightbox style gallery - need starting point....
I've made a gallery slideshow before but wasn't as intuitive looking back at it now and I want to start fresh on this new project. I would like to convert a jQuery lightbox style gallery into a flash XML based AS3 image gallery with categories. I don't want to code the FLA, I want separate AS files.
This is a school project for my website. I would use jQuery and I have more experience with it but this project needs a flash component. I'm just not sure where to start and looking for some advice on how and where I could find resources. I want it to be minimal as I can make it;
- 8 thumbnails to a "page/section" with more flowed into page 2 or 3 etc. (or a srcoller)
- a few buttons for categories
- images fading in full size with a description when hovered over and a close button
- preloader (simple bar)
Esentially something like this > http://www.layeredpixels.com/tf/unibox/#works which is using http://razorjack.net/quicksand/ for the thumbnails. That might be ambitious but I'd suffice with a simple fade effect
I just dont have much time and need to focus on other projects in the meantime so to find a good base with no fancy effects (yet) would really help. I've downloaded some galleries out there but most of the code is messy or outdated.
http://www.republicofcode.com/tutorials/flash/as3gridgallery/8.php < this is alright, but all the code is done in the FLA. I might break it into AS files but it depends. And I would like help with adding categories to that.
I want to look into implementing Greensock, so any pro's out there that can give any advice would help greatlyThe best way to get going is to choose a solution path and get started on it. Then, to get help, come with specific coding problems to solve and not a shopping list of wants.
-
Hi, my problem is :
In my Application i want to parse an XML file with DOM parser. The problem is that in my Project "MyProject -> Project Properties -> Libraries and Classpath"
I have included some 15 libraries which are useful for my Application: ADF Faces Runtime 11, ADF Web Runtime and etc.
Problems are causing the libraries: BC4J Runtime,ADF Model Runtime, MDS Runtime Dependencies
because when added my source which is parsing an XML file stops working.The source code is:
DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
DocumentBuilder db = dbf.newDocumentBuilder();
File file =
new File("C:\\Documents and Settings\\ilia\\Desktop\\begin.xml");
Document doc = db.parse(file);
Element root = doc.getDocumentElement();
NodeList dots = root.getElementsByTagName("w:t");
Element firstDot = (Element)dots.item(0);
String textValue = firstDot.getFirstChild().getNodeValue();
I use DOM because i need to change some values in the XML file, but its not working neither for reading nor for writing.When debugging I see that it gets the root of the xml but " firstDot.getFirstChild().getNodeValue() " returns null and it breaks with NullPointerException. And that's only when the libraries mentioned above are added to the project. Without them it works just fine !
I don't know, it's like when added the parser validates my xml against some schema and returns null.
The xml file is very simple MS Word Document saved as .xml .But I don't think that's the problem.
Thanks in advance !
iliyaHi all,
I found the solution to my problem.The right way to parse and change an XML file with DOM parser using the Oracle XML Parser v2 should look like this:
JXDocumentBuilderFactory factory =
(JXDocumentBuilderFactory)JXDocumentBuilderFactory.newInstance();
JXDocumentBuilder documentBuilder =
(JXDocumentBuilder)factory.newDocumentBuilder();
File file = new File("c:/Documents and Settings/ilia/Desktop/begin.xml");
InputStream input =
new FileInputStream(file);
XMLDocument xmlDocument = (XMLDocument)(documentBuilder.parse(input));
System.out.println("Encoding: " + xmlDocument.getEncoding());
System.out.println("Version: " + xmlDocument.getVersion());
NodeList namespaceNodeList =
xmlDocument.getElementsByTagNameNS("http://schemas.microsoft.com/office/word/2003/wordml","t");
XMLElement namespaceElement17 = (XMLElement)namespaceNodeList.item(17);
namespaceElement17.getFirstChild().setNodeValue("someString"); -
How to access multiple attributes of a node at the same time in XML AS3
<chapter id="1" title="">
<screen title="lesson">
<swf>EXCEL/CH01/CH01_S01.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Choose a lesson</prompt>
</screen>
<screen title="lesson" tasks="3">
<swf>EXCEL/CH01/CH01_S02.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
I have 2 attributes of screen node which are title and tasks.
how can I access these 2 attributes at the same time in AS3
Is that correct:
excel.chapter.screen.(@title == "lesson").@tasks
Thanks alot in advance.var excel:XML = <data>
<chapter id="1" title="">
<screen title="lesson" tasks="">
<swf>EXCEL/CH01/CH01_S01.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Choose a lesson</prompt>
</screen>
<screen title="lesson" tasks="3">
<swf>EXCEL/CH01/CH01_S02.swf</swf>
<ltitle>Chapter 1</ltitle>
<rtitle>Setting Up a Workbook</rtitle>
<prompt>Click Next to continue</prompt>
</screen>
</chapter>
</data>;
trace(excel.chapter.screen.(@title == "lesson" && @tasks == "3").toXMLString());
Note that for this to work (and not throw an error) every screen node needs a tasks attribute.
In your sample code, the first screen node did not have a tasks attribute, in which case an error is thrown when using @tasks == "3" -
XML Parsing - problem with a value of an element if starting with space
Hi Experts,
I need your valuable guidence to get out of a problem in parsing an XML file.
An XML file is read into xstring variable and it is processed to be split into the corresponding itab.
Please find the code below
types: begin of ty-itab,
field(4096),
end of ty-itab.
Data:
g_ixml TYPE REF TO if_ixml,
g_ixmldocument TYPE REF TO if_ixml_document,
g_ixmlstreamfactory TYPE REF TO if_ixml_stream_factory,
g_ixmlstream TYPE REF TO if_ixml_istream,
g_ixmlparser TYPE REF TO if_ixml_parser,
g_ixmlnodemainlist TYPE REF TO if_ixml_node_list,
g_ixmlnodelistmainelement TYPE REF TO if_ixml_node_list,
g_sxmldata TYPE string,
g_ixmlnode TYPE REF TO if_ixml_node.
DATA: wa_xmltab TYPE xstring,
itab type table of ty-itab.
OPEN DATASET l_file IN BINARY MODE FOR INPUT MESSAGE v_msg.
READ DATASET l_file INTO wa_xmltab.
PERFORM f_create_xmltable USING wa_xmltab
CHANGING v_msg.
IF NOT v_msg IS INITIAL.
msg = v_msg.
EXIT.
ELSE.
itab[] = it_xmldata[].
ENDIF.
CLOSE DATASET l_file.
Subroutine to convert xstring to char type ITAB.
FORM f_create_xmltable USING value(pi_inputxmlstring) TYPE xstring
CHANGING v_msg.
*-- create the main factory
g_ixml = cl_ixml=>create( ).
*-- create the initial document
g_ixmldocument = g_ixml->create_document( ).
*-- create the stream factory
g_ixmlstreamfactory = g_ixml->create_stream_factory( ).
*create input stream
g_ixmlstream = g_ixmlstreamfactory->create_istream_xstring( string =
pi_inputxmlstring ).
*-- create the parser
g_ixmlparser = g_ixml->create_parser( stream_factory =
g_ixmlstreamfactory
istream = g_ixmlstream
document = g_ixmldocument ).
*-- parse the stream
IF g_ixmlparser->parse( ) NE 0.
*if parser cannot be created then give error exit
IF g_ixmlparser->num_errors( ) NE 0.
EXIT.
ENDIF.
ENDIF.
*-- we don't need the stream any more, so let's close it...
CALL METHOD g_ixmlstream->close( ).
CLEAR g_ixmlstream.
*get the number of main nodes of the XML document
g_ixmlnodemainlist = g_ixmldocument->get_children( ).
*set number of elemtns
g_inummainelements = 0.
g_imainelementsctr = 0.
g_inummainelements = g_ixmlnodemainlist->get_length( ).
g_ifirstlevelctr = 0.
*loop through the document till all have nodes have been covered.
WHILE g_ifirstlevelctr LT g_inummainelements.
*get the first node
g_ixmlnode = g_ixmlnodemainlist->get_item( g_ifirstlevelctr ).
*check the type of node
g_isnodeelement = g_ixmlnode->get_type( ).
*if node is not of type Element then continue
*because we have got to read only text from element nodes.
IF g_isnodeelement NE c_nodeelement.
g_ifirstlevelctr = g_ifirstlevelctr + 1.
CONTINUE.
ENDIF.
*get nodes of the element just found.
g_ixmlnodelistmainelement = g_ixmlnode->get_children( ).
*get number of children of main element
g_inumchildelements = g_ixmlnodelistmainelement->get_length( ).
*loop trhough the number of children
WHILE g_imainelementsctr LT g_inumchildelements.
g_ixmlnodemainelement = g_ixmlnodelistmainelement->get_item(
g_imainelementsctr ).
*get type of node
g_isnodeelement = g_ixmlnodemainelement->get_type( ).
IF g_isnodeelement NE c_nodeelement.
g_imainelementsctr = g_imainelementsctr + 1.
CONTINUE.
ENDIF.
*get name of the node.
g_selementvalue = g_ixmlnodemainelement->get_name( ).
*get children of node
g_childnodelist = g_ixmlnodemainelement->get_children( ).
g_inumchildren = g_childnodelist->get_length( ).
g_ichildelementcounter = 0.
*while there are number of children of node.loop through
WHILE g_ichildelementcounter LT g_inumchildren.
*get the child node
g_childnode = g_childnodelist->get_item(
g_ichildelementcounter ).
*check the type of node
g_isnodeelement = g_childnode->get_type( ).
*if node is not of element type continue
IF g_isnodeelement NE c_nodeelement.
g_ichildelementcounter = g_ichildelementcounter + 1.
CONTINUE.
ENDIF.
*otherwise get element name
g_selementname = g_childnode->get_name( ).
*get value stored in this node.
g_selementvalue = g_childnode->get_value( ).
g_numelem = g_inumchildren - 1.
IF g_ichildelementcounter EQ g_numelem.
CONCATENATE: g_slinedata g_selementvalue
INTO g_slinedata.
ELSE.
* store the value of noide in delimiter ~ line
* Check for Invalid characters in file
IF g_selementvalue CA '&'.
REPLACE ALL OCCURRENCES OF '&' IN g_selementvalue WITH
endif.
*if value contains delimiter then error
IF g_selementvalue CA '~'.
V_MSG = text-003.
EXIT.
ELSE.
CONCATENATE: g_slinedata g_selementvalue '~' .
INTO g_slinedata.
ENDIF.
ENDIF.
*continue
g_ichildelementcounter = g_ichildelementcounter + 1.
ENDWHILE.
g_ichildelementcounter = 0.
*increment the main element counter by one to go to the next node
g_imainelementsctr = g_imainelementsctr + 1.
*move the current delimiter line creted to internal table to be given
*back to the calling program
MOVE g_slinedata TO wa_xmldata-data.
APPEND wa_xmldata TO it_xmldata.
MOVE '' TO g_slinedata.
MOVE '' TO wa_xmldata-data.
ENDWHILE.
*increment counter to move to hte next node.
g_ifirstlevelctr = g_ifirstlevelctr + 1.
g_imainelementsctr = 0.
ENDWHILE.
ENDFORM. "f_create_xmltable
XML structure
<?xml version="1.0" encoding="utf-8"?>
<ABCInbound xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="C:\XYZSchema\ABCInbound.xsd">
<HH>
<RecordType>HH</RecordType>
<Source>ABC</Source>
<Destination>XYZ</Destination>
<TimeStamp>20050909220546</TimeStamp>
</HH>
<BH>
<RecordType>BH</RecordType>
<DocType>AB</DocType>
<Reference>2205516125</Reference>
<DocumentDate>20080909</DocumentDate>
<PostingDate></PostingDate>
<CompanyCode>ABC</CompanyCode>
<Currency>INR</Currency>
<ExchangeRate>1.0000</ExchangeRate>
<Park></Park>
<ItemNumber>2</ItemNumber>
</BH>
<BL>
<RecordType>BL</RecordType>
<Reference>2205516125</Reference>
<RefLineItem>1</RefLineItem>
<AcctType>K</AcctType>
<DrCrIndicator>H</DrCrIndicator>
<Account>01000003</Account>
<Amount>364.00</Amount>
<VendorName-1>TOM & JERRY IS MY</VendorName-1>
<VendorName-2> NAME TO BE PAID</VendorName-2>
<VendorName-3>1987566Z</VendorName-3>
<VendorName-4>22</VendorName-4>
<Street>UCX STREET</Street>
<City>ROAD 4</City>
<PostalCode>515004</PostalCode>
<Country>IND</Country>
<ContactPerson></ContactPerson>
<AlternatePayeeCode></AlternatePayeeCode>
<AlternatePayeeName-1></AlternatePayeeName-1>
<AlternatePayeeName-2></AlternatePayeeName-2>
<AlternatePayeeName-3></AlternatePayeeName-3>
<PaymentTerms></PaymentTerms>
<BaselineDate></BaselineDate>
<PaymentMethods></PaymentMethods>
<Allocation></Allocation>
<LineItemText>item text</LineItemText>
<TaxCode></TaxCode>
<TaxAmount>0.00</TaxAmount>
<WHTaxCode></WHTaxCode>
<WHTaxbase>0.00</WHTaxbase>
<Fund></Fund>
<FundCenter></FundCenter>
<CostCenter></CostCenter>
<InternalOrder></InternalOrder>
<TaxAutomatically></TaxAutomatically>
<SpecialGLIndicator></SpecialGLIndicator>
</BL>
<TT>
<RecordType>TT</RecordType>
<TotalRecords>1</TotalRecords>
<TotalValue>222</TotalValue>
</TT>
</ABCInbound>
when the above xml file is read and populated into ITAB, for element vendorname-2 which has a space in first position , that space is ignored.
This is being used for a FB01 posting and vendor is paid based on Name1+Name2 printed on cheque and due to the space ignoring problem, the vendor name is displayed wrongly thus causing problems.
I appreciate if someone could guide me thru and help me in solving this problem.
How to preserve the leading or trailing space.
g_selementvalue = g_childnode->get_value( ).
when i check g_selementvalue, space is ignored.
i will be greateful if someone could guide me through.
Regards,
Simha
Edited by: Simha on Dec 11, 2008 10:49 AM0.02: A C C E P T: Request="NEXT"
0.06: Fetch session state from database
0.08: ...Check session ... owner
0.08: ...Metadata: Fetch Page, Computation, Process, and Branch
0.08: Session: Fetch session header information
0.08: ...Metadata: Fetch page attributes for application ..., page 330
0.08: ...Validate item page affinity.
0.08: ...Validate hidden_protected items.
0.08: ...Check authorization security schemes
0.08: Session State: Save form items and p_arg_values
0.08: ...Session State: Save "P330_PROJECT" - saving same value: ""
0.09: ...Session State: Saved Item "P330_SHUTTLE" New Value=""
0.09: Processing point: ON_SUBMIT_BEFORE_COMPUTATION
0.09: Branch point: BEFORE_COMPUTATION
0.09: Computation point: AFTER_SUBMIT
0.09: Tabs: Perform Branching for Tab Requests
0.09: Branch point: BEFORE_VALIDATION
0.09: ...Evaluating Branch: BEFORE_VALIDATION type: "REDIRECT_URL" button: 12904321314585385 branch: (Unconditional)
0.09: Perform validations:
0.09: ...Item Not Null Validation: P330_SHUTTLE
0.09: ...Validation did NOT pass
This is from debugging, what does the point "0.09: ...Session State: Saved Item "P330_SHUTTLE" New Value="" "
mean ? I think it means, that the Shuttle somehow sets itself to null ?! but i dont understand why...
There is no computation or anything that deletes the shuttle, the page is quite small, there is not much more than the shuttle and the validations and computations to give default value and transforming the shuttle items into a collection to continue working with the IDs.
I dont check whats the problem
Edited by: user12154443 on 21.07.2010 09:47 -
am using XML parser for PL/SQL in Oracle9i Enterprise Edition Release 9.0.1.1.1
When i run the sample xml program, i get error which is as follows. While compiling no errors. But while executing it reports error as given below.
SQL> execute domsample('c:\xml', 'family.xml', 'errors.txt');
begin domsample('c:\xml', 'family.xml', 'errors.txt'); end;
ORA-20100: Error occurred while parsing: No such file or directory
ORA-06512: at "COMMODITYBACKCONNECT.XMLPARSER", line 22
ORA-06512: at "COMMODITYBACKCONNECT.XMLPARSER", line 79
ORA-06512: at "COMMODITYBACKCONNECT.DOMSAMPLE", line 80
ORA-06512: at line 1
What need to be done to rectify the above problem.
when i do the following validation check
SQL>
SQL> select substr(dbms_java.longname(object_name),1,30) as class, status
2 from all_objects
3 where object_type = 'JAVA CLASS'
4 and object_name = dbms_java.shortname('oracle/xml/parser/v2/DOMParser')
5 ;
CLASS STATUS
oracle/xml/parser/v2/DOMParser VALID
oracle/xml/parser/v2/DOMParser VALID
Please advice to how remove the following error:
ORA-20100: Error occurred while parsing: No such file or directoryFound the solution on metalink. There is a file under /$ORACLE_HOME/javavm/install/init_security.sql
which needs to be run under username where you are installing xml parser.
This step is not in readme.txt file provided as a part of download from the OTN website. -
XML File - Problem.with naming tags with XI standard functions
Hello,
simple (?) problem:
Receiver expects an XML file via file adapter.
(The source data comes from an RFC connect to XI.)
In the XML tags like these are expected (following W3C definitions):
A) </gdt:ValueGroup>
How to define a data type with a ":" in its name or to convert it to the required tag?
B) <gdt:ExtendedAttribute gdt:guid="4c102d6b077de7c1f0e27391e40bb80f" gdt:code="X01" >GR2 LI3</gdt:ExtendedAttribute>
This one is a real nice one. The part with "gtd:guid=" within the tag is variable. How to add such values into tag names?
Any ideas if this is possible with standard and how.
If this is the limit of XI I think we need an XSLT- or JAVA-maping program to generate the required file.
Thank you for any help!
Best regards
DirkHi Dirk,
just one thing:
>>>>The part with "gtd:guid=" within the tag is variable.
this is ok as it's just an attribute
of the ExtendedAttribute tag's name
so it can be variable without any problems
(you can fill it in the mapping for example)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Data Services Fix Pack 12.2.1.2 issued to resolve XML loader problem
We've had a few customers contacting us about the following error message:
"The message type for datastore <my_ds> has not been set". Please notify Customer Support"
Note that the text "<my_ds> will be the name of the XML loader you have in your dataflow. This error occurs when you are adding a new loader to a dataflow that is an XML type.
The customers that have reported this issue were all building real-time jobs and the loader type was XML Message Target.
In order to address this issue you will need to download and install the latest update which is 12.2.1.2. The above issue was introduced in 12.2.1.1 (3.2 SP1). You will ONLY have to install the client components (Designer) in order to address this issue. no updates are necessary to the server side of the application to address this problem.
An SAP Note has also been written up on this issue: [1423045|https://bosap-support.wdf.sap.corp/sap/support/notes/1423045]
Thanks,
Ryanthere is a connection timeout when trying to contact the laptop.the last lines it shows are:
PCI: setting IRQ 0 as level-triggered
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda: DMA, hdb:pio
ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc: pio, hdd: pio
hda: IC25N060ATMR04-0, ATA DISK drive -
XML alignment problem when opening with notepad - XML generated from SAP
Hi all,
I am sending a mail with attachment as XML format by using the function module SO_NEW_DOCUMENT_ATT_SEND_API1.
I am getting the xml file in mail and it was properly aligned when i open it. But when i open it with notepad the alignments are changing.
Below is the code for sending a mail. The content of the XML file populaed in int. table lt_attachment.
lt_attachment[] = pt_attachment[].
LOOP AT lt_attachment INTO ls_attachment.
ls_objtxt-line = ls_attachment-container.
APPEND ls_objtxt TO lt_objtxt.
CLEAR : ls_attachment, ls_objtxt.
ENDLOOP.
Creating the document to be sent
ls_mailsubject-obj_name = 'MAILATTCH'.
ls_mailsubject-obj_langu = sy-langu.
ls_mailsubject-obj_descr = 'You have got mail'.
ls_mailsubject-sensitivty = 'F'.
lv_cnt = LINES( lt_objtxt ).
ls_mailsubject-doc_size = ( lv_cnt - 1 ) * 255 + STRLEN( ls_objtxt ).
DESCRIBE TABLE lt_objtxt LINES lv_tab_lines.
Header of the email
ls_objpack-transf_bin = space.
ls_objpack-head_start = 1.
ls_objpack-head_num = 0.
ls_objpack-body_start = 1.
ls_objpack-body_num = lv_tab_lines.
ls_objpack-doc_type = lc_raw.
APPEND ls_objpack TO lt_objpack.
CLEAR ls_objpack.
ls_objpack-transf_bin = lc_x.
ls_objpack-head_start = 1.
ls_objpack-head_num = 1.
ls_objpack-body_start = 1.
ls_objpack-body_num = lv_tab_lines.
ls_objpack-doc_type = 'XML'.
ls_objpack-obj_name = 'data'.
ls_objpack-obj_descr = 'data'.
ls_objpack-doc_size = ls_objpack-body_num * 255.
APPEND ls_objpack TO lt_objpack.
CLEAR ls_objpack.
Add Recipients
ls_reclist-rec_type = 'U'.
ls_reclist-com_type = 'INT'.
ls_reclist-receiver = pv_mail.
APPEND ls_reclist TO lt_reclist.
Mail Contents
ls_mailtxt-line = 'Please find attached your XML doc.'.
APPEND ls_mailtxt TO lt_mailtxt.
CLEAR ls_mailtxt.
ls_mailtxt-line = lc_regards.
APPEND ls_mailtxt TO lt_mailtxt.
CLEAR ls_mailtxt.
ls_mailtxt-line = lc_dewa.
APPEND ls_mailtxt TO lt_mailtxt.
CLEAR ls_mailtxt.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = ls_mailsubject
put_in_outbox = lc_x
commit_work = lc_x
TABLES
packing_list = lt_objpack
contents_bin = lt_objtxt
contents_txt = lt_mailtxt
receivers = lt_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc EQ 0.
COMMIT WORK.
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
pv_return = 'Success'.
ELSE.
pv_return = 'Failed'.
ENDIF.
CLEAR: ls_objtxt,ls_reclist, ls_objpack ,ls_doc_chng.
REFRESH: lt_objtxt,lt_reclist,lt_objpack.
Could any one help me on this.
Thanks & Regards,
Vineel.Can't you PREVIEW your question before posting? Here you have more than 2500 characters, so we can't read your code.
Your "problem" seems normal to me (you shouldn't open an XML file with Notepad). Could you give an example how it looks like and how you'd like to make it appear? -
Faces-config.xml XML parser problem ???
I'm taking below error message when I was opening faces-config.xml file with diagram view, what's the exact solution of this problem???
Message
BME-99100: An error has been reported from the XML parser
Cause
The parse has reported the following error:
<Line 24, Column 2>: XML-20201: (Fatal Error) Expected name instead of <.
Action
Thanks for all...
Message was edited by:
user559176I looked very well, there was'nt any error on line 24 about "<", I think if the size of faces-confic.xml file increased JDeveloper XML Parser cannot parse with high file size, what're other solutions?
-
I am upgrading my Solution Manager 7.0 from stack 17 to stack 18(EHP1) but whenever I try to generate the xml file on the service marketplace, all I get is "The table does not contain any entries"
To recreate...
go to service.sap.com/swdc --> SAP Support Packages --> Support Package Stacks --> SAP Solution Manager 7.0
Then...
Target Stack = SAP SOLUTION MANAGER 7.0 EHP 1-Initial Delivery
Source Stack = 17 (8/2008)
when I click NEXT, it goes straight to page 3 of 3, and I get buttons for Previous Step, Print List, Save as file, Add to download basket, Side Effects report, etc...
Then the table where all the packages should be is empty, except for the message "the table does not contain any entries"
We have tried this with multiple people on multiple machines, all the same result. By the way I just upgraded from abap & java stack 15 to 17.. and I had no issues getting the xml file there. (I downloaded the DVDs of the actual patches so I just need the xml)
Thanks!
Edited by: Bill McCrea on Jan 15, 2009 2:42 PMAfter reading your question, I went to the SPstack webpage, and selected a SOLMAN EHp1 stack 16-17, DB2 UDB. when I was on the "Step 3 of 3 Downloadable support packages" I was able to select the Save as File button and I was able to generate the XML. It may have been a temporary problem. Make sure that you don't have a pop-up blocker that would prevent the window from appearing.
Regards
---Bill
Maybe you are looking for
-
How can I backup NAS drive to Time Capsule using Time Machine?
My itunes library is on a USB HD that's connected to my time capsule, essentially turning the drive into a NAS drive. Is there anyway I can include this drive in time machine backups? So basically, time machine would be backing up the hard drive conn
-
How can I insert a colon(:) when setting up my ipad mini for a New Account ? (Mail, Contacts, Calendars to Add Mail Account to New Account) Virgin media require a colon as part of the Email line . I can put in a colon on the line above or below
-
Excise duty getting calculated on freight value
Hi frnds, I have an excisable material and the freight charge (FRA2) for this material.Tax procedure is TAXINN. My issue is - during MIRO the excise duty is calculated on the material as well as on the freight charges. My client does not want excise
-
Need Help With Simple ABAP Code
Hello, I'm loading data from a DSO (ZDTBMAJ) to an Infocube (ZCBRAD06). I need help with ABAP code to some of the logic in Start Routine. DSO has 2 fields: ZOCTDLINX & ZOCBRDMAJ. 1. Need to populate ZOCPRODCD & ZOCREFNUM fields in Infocube: Logic
-
Employee relationship between BP and org.BP missing
Hello, I am getting few error in SRM when trying to order a shopping cart. After checking the user and BP through USERS_GEN i am getting this error. "Employee relationship between BP and org.BP missing". Could anyone help me in this. Thanks, Pijush