XML Audio Issue - brings in 1A and not 2A

Background,
We aquired all our media for a project and placed it in a FCP7 project file Prores HD101825P. No edits, just clips in the browser.
then we exported an XML Version 1 so that we could move all the clips and bins over to a G5 to log everything using FCP6 (Our offline suite).
when we imported the XML into FCP6 it only brings in the clips with 1 track of audio and not 2! And now we have logged the footage into bins.
We have double checked our original FCP7 project and the source media and everything here contains 2 tracks of mono audio.
Can anyone help as to how we can reconnect 2 tracks of audio in the FCP6 project?
We tried taking the clips offline and then reconnecting them but this does not change anything.
can anyone advise how we get the the 2nd audio track reconnected in the browser please?

Hey Toby
Make a clip offline (Shift D >> Leave Them on the Disk), then change the clip settings (Modify menu > Clip Settings) to properly reflect that it has 2 chnnels of dual mono audio, then reconnect ... if that works fine then you should be able to do it en masse for all the other clips
Best
Andy

Similar Messages

HP Slate 21 audio issue after KitKat update and reset

I have upgraded my HP Slate 21 from JB to KK. Now the sound quality is very bad!
I came directly from xxx.11 kernel and made factory reset but didn't get a good result. Please how can I fix this tremendous issue?

Hey @PauloTxR ,
Welcome to the HP forums.
I understand you're experiencing issues with sound quality on your Slate 21 PC.
Please review the following thread: HP Slate 21 Kit Kat OTA Update Fix for Audio Quality and LAN Connectivity.
This fix will resolve audio issues of a software nature resulting in the KitKat update. If your issue persists after applying the specific update mentioned in this thread and have done a factory reset, the issue is likely hardware related and not the result of the KitKat update.
If you have done the above and continue to have problems please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Open XML file with user default browser and not the default editor.

Hi,
I'm writing a java program that appends numerous XML files together. The result is a NEW well formed XML document. Since i have an XSLT that performs several UI modifications on this xml file, the file extension must remain '.xml'. I need to open this xml file with the users default web browser. The problem is that:
Runtime.getRuntime().exec(cmd);
....opens the xml file with the users default program for opening xml files which in my case is Oxygen. I want to force java to open this xml file with the users default web browser and nothing else.
I guess i need the Windows command to perform the 'open with' feature but i have no idea what that command is or how to find it.
Any ideas?
Thanks,
Varun Singh
Edited by: Jagara00 on Jul 2, 2009 3:49 PM

sabre150 wrote:
Jagara00 wrote:
Your right, but my question relates to the java issue and not the XSLT aspect of the problem. I am looking for a java solution for reasons i will no go into here. You have lost me.Me too.
People do not often ask questions (or make challenges or observations) idly for the sake of 'theory'. It is most useful to explain to the best of your ability.
As to
"Since the Desktop class was only released with SE 6 I am forced to find another alternative. "
There is an 'alternative'. You can import it into a 1.5 project. It was available as a free standing API before 1.6 - through JDIC. See [https://jdic.dev.java.net/documentation/Examples.html|https://jdic.dev.java.net/documentation/Examples.html] for more info.
Edit 1:
To a later reply
"Do u .."
..want to spell incorrectly when you get frustrated?
"..do not wish to.."
..get any help? That is the way you are heading.
Edited by: AndrewThompson64 on Jul 3, 2009 9:27 AM

XML Query works on one database and not working on others with errLPX-00241

I have one query as below
SELECT EXTRACTVALUE
(VALUE (xml_node),
'/inspectionActivityArtifact/ns2:landfillTypes/ns2:type[position()=1]',
'xmlns:ns2="http://dwm.sw.xmlNamespace/InspectionActivity"'
) AS TEST
FROM artifacts a,TABLE (XMLSEQUENCE ((XMLTYPE (NVL (artifact_data, '<empty></empty>'))))) xml_node
this works well on other databases but not working on one database. Everything is same configuration and OS and everything.
I can work on other XML parsing which is working fine but not this query.
Any idea ?
Viral Dave

post versions and patch levels for both databases eg 10.2.0.1.0 and the error message you are getting.

Issues with vision box and not being able to get "...

Hi all, i've upgraded my package to essentials extra, and that gone through ok, but my Vision + box is still using WinCE firmware and not the firmware required to watch fox ect, when ever I try doing a master reset (OK + Down) it forrages off for new firmware, dose what it needs to do, then reboots, just to give me WinCE still... i've been through the mill contacting customer services from order management - extra channels team - tech services and they are all passing the buck... end result 3 days of trying to get this resolved, I am still none the wiser!? arghh!
it's a Pace DIT7431/05_3 showing as having
TV client v: 2.1.2295.2110 (release)
Platform OS/Version WinCE/5.0.1400
Bootstrap: 2.8025
STB/CPU PACE Pace_DiT7431_05_3 / 405
if anyone can shine a light i'd really appreciate it
Solved!
Go to Solution.

Probably a note to the Mods...
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

XML import issues in CS5.5, but not CS5...

Hi guys,
I'm currently using the Production Premium CS5.5, and have been trying to import an XML from Final Cut Pro 7 into Premiere. The issue is that none of my audio tracks appear in the sequence, nor any video tracks aside from my 2 main tracks.
This isn't a problem in the previous version (CS5), as I can import the same XML and all my audio tracks, etc. show up in the sequence.
Since I just started playing with CS5.5, I'm wondering if there's something I don't have set up properly? Is there a conflict w/ having CS5 and 5.5 installed? Has anyone else encountered a similar issue?
Thanks for the response, if you got it. I really really appreciate it.

So, I started figuring out what the issue is, but not how to fix it:
I had some overlay graphics (Quicktimes w/ Alphas) that were placed over my main video track, which I suppose Premiere doesn't like.
The thing I can't figure out, is why I could still bring in the rest of the project with CS5, but not CS5.5.....

Front Panel Audio Issues on both Z97 and X99

Hello,
I am an owner of a Z97 PC Mate and a X99s SLI Plus Mobo.
On both of these mobos, with the latest realtek drivers I cannot get front panel audio working.
I have also tried the MSI drivers for each mobo from the product pages.
I have "Disable front panel jack detection" enabled on both. If I disable this, it shows the jacks not being utilized.
The realtek hd manager shows that both the front panel headphone and mic jack are being utiliized, even with nothing is plugged in and if I have the front panel header disconnected from the mobo. On each model I made sure that HD Audio is enabled in the UEFI.
I feel that since I am having the issue on two seperate products that there is a similar issue between each that I cannot figure out. I do not have this issue on my ASUS Z77 Sabertooth.

Quote from: Nichrome on 02-May-15, 15:28:51
Hi
What is the case are you using?
Also are you sure you plug the front audio properly? Or if there are no bent/missing pins? I am on my 3rd MSI board (I switch a lot :D ) but all worked fine with my case.
Try using audio while either board is running on non conductive surface (e.g. wooden table or motherboard box). Might be something shortening the board.
I've tried both boards in all 3 cases I own.
NZXT Switch 810
Raidmax POS (Honestly don't know the name of it, but it has HD Audio connector)
Phanteks Enthoo Luxe

How to solve issue with strange iphoto events shown in itunes for sync IOS devices ? This issue is very old and not been fixed by apple... terrible

all softwares latest version january 2013.
I see in itunes many strange crazy iphoto events that in iphoto do not exist.
These vents are named as data and contains just few photos.
each event can be sync with IOS devices, but that event is not in iphoto !
It looks like miniatures... no way to solve this issue making all possible maintenance in iphoto library.
THis issue is very old, very terrible, people start to have doubts about iphoto as a reliable software.
Need a fix asap.
Apple please help!
I were with 2 hours at genius bar but nothing.
Genius told me apple have been informed and they are working on a solution..... this 4 months ago !!!
Need solution asap
THanks
Fabio

Apple aren't here. As you're the only person with this problem that I've seen on here, I would suspect that its more a local problem on your machine than something Apple need to fix.
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for the iPod Photo Cache.
Trash it. Start iPhoto and try sync again.
Regards
TD

Audio Issue - Using Logic Pro and iMovie to Create Movies for Youtube

I am trying to use a combination of Quicktime, iMovie and Logic Pro 9 to create videos of me playing/singing songs to post on Youtube. Before I can ask the question, I think it would be best to briefly explain my process, so here's one example:
One thing I try to do is video myself playing piano and singing at the same time. What I do is open up Logic Pro and load my piano sound and arm an audio track that my microphone is plugged in to; I also go to "System Preferences" and click on "Sound" and make sure that my audio interface is selected for the input method. Then, I open up Quicktime and select "New Movie Recording". Finally, I open up my software for my interface and set it up for "loopback"...there's a picture below.
If you look at the bottom of the interface, you'll see it says "DAW 1: Loop Back 1" and "DAW 2: Loop Back 2". Ideally, this means that whenever I start recording in Quicktime, all of the sounds that I am making in Logic (the piano playing and the singing) will loop back into the computer and be recorded by Quicktime. This does actually happen, but my question is this:
I've noticed that the sound quality of software instruments is drastically reduced once they have been recorded by Quicktime (or iMovie) and I play the movie back. Actual audio files, like me singing or playing a real instrument aren't really affected, but for some reason the software instruments sound very thin once I listen to the audio in the movie. Why is this happening? Is there a way to preserve the audio quality to be the same during video playback as it is when I am playing the instruments live in Logic?

Interesting and convoluted way to get something done.. from what you're describing it almost sounds like the software instruments are somehow getting recorded twice but slightly out of phase.
When you record your singing are you monitoring through headphones or speakers?

Endeca Server performance issue: dgraph is slow and not always available

Hi, I'm experiencing a problem with Endeca Server. It's very slow and the dgraph process takes about 97% of the cpu without doing queries.
When I try to open the Studio Page, the cpu utilization of the dgraph process increases up to 200%, and if I try to launch a simple query from Integrator the result is:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
     <env:Header/>
     <env:Body>
          <env:Fault>
               <faultcode>env:Server</faultcode>
               <faultstring>Error contacting the conversation service on data store 'SocialIDData' at port 7011: Error parsing data version from DGraph response.</faultstring>
               <detail>
                    <ns2:Fault xmlns:ns2="http://www.endeca.com/MDEX/conversation/2/0" xmlns:ns3="http://www.endeca.com/MDEX/lql_parser/types"/>
               </detail>
          </env:Fault>
     </env:Body>
</env:Envelope>
If I try to ping the Data Store by visiting the url http://192.168.2.16:7001/endeca-server/admin/SocialIDData?op=ping sometimes the response is positive, and sometimes it's negative.
I've also checked the log file in ${ENDECA_SERVER_DOMAIN}/EndecaServer/logs/SocialIDData.out and I've found that message:
MALLOC:   4656726016 ( 4441.0 MB) Heap size
MALLOC:   4617801000 ( 4403.9 MB) Bytes in use by application
MALLOC:     23912448 (   22.8 MB) Bytes free in page heap
MALLOC:      2146304 (    2.0 MB) Bytes unmapped in page heap
MALLOC:      4865568 (    4.6 MB) Bytes free in central cache
MALLOC:       198144 (    0.2 MB) Bytes free in transfer cache
MALLOC:      7802552 (    7.4 MB) Bytes free in thread caches
MALLOC:        27450              Spans in use
MALLOC:            7              Thread heaps in use
MALLOC:     19922944 (   19.0 MB) Metadata allocated
MALLOC:         4096              Tcmalloc page size
Endeca fatal error detected in dgraph.
Segmentation violation detected.
testbi.localdomain:/u01/app/oracle/Middleware/user_projects/domains/endeca_domain/EndecaServer/logs
Register state:
Stack trace:
Please report this problem to Endeca and include the following information
1. Endeca software version number
2. Operating system, operating system version, and hardware platform
3. Any other information that you can provide (including core files)
4. The contents of this message
Process map:
00400000-049b4000 r-xp 00000000 fd:04 2590868                            /u01/app/oracle/Middleware/EndecaServer7.5.1_1/endeca-server/dgraph/bin/dgraph
04bb4000-04c11000 rw-p 045b4000 fd:04 2590868                            /u01/app/oracle/Middleware/EndecaServer7.5.1_1/endeca-server/dgraph/bin/dgraph
04c11000-04c69000 rw-p 00000000 00:00 0
As you can see at rows 16-17-18 that's a problem with the dgraph, but I have no idea on how resolve it.
My system configuration is:
OS: Oracle Linux 6
OEID 3
Can anyone help me? Thank you.
Samuele Scattolini

Please contact Oracle Support at http://support.oracle.com for assistance. Thanks.

Bootcamp 3.1 and imac windows 7 64bit update not installing. Audio issues!

After many days of work getting the windows 7 working in bootcamp in my imac 27 (still with audio issues) I eagerly awaited the bootcamp update and imac updates.
Neither will install.
Then I find that according to tech support as of now I have to reinstall Windows 7 again for the updates to work!
It took me 5 full 8 hours days to get all my scientific programs installed and working, now I find I can't even simply update the drivers I need. I don't want to reinstall.
My only issues are audio.
Here they are:
1) The headset jack works fine on the Mac side, but in Windows 7, it causes the i7 intel CPU to go crazy. There is no CPU spike on the mac side.
2) The headset jack in the imac is a trrs jack. The same as in the iphone, a tri-band jack that has three bands, two audio out channels and one mic in channel. A trrs headset works fine on the mac side with using the headset mic (as in iphone) rather than the built in mic. (this provides much better quality for sound recording). I don't want to use a usb mike.
In Windows 7 the mic part of the trrs headset does not work.
3) In Windows 7 when going into audio devices recording, no audio mixer shows up, so when I do video or audio screen capture the only way to capture the sound is through the speakers and then back through the imac built in mic, rather than directly through the unit. (terrible sound quality) On the mac side the mixer element works fine.
Now I find from other imac users that even the new updates for the imac on windows 7 don't address and fix the audio issues. I am sure not going to go through 5 more days work only to find the audio issues still don't work.
I need these audio aspects to work properly though!
I have tried to get drivers for the cirrus logic audio card, but guess what there are none available and cirrus logic doesn't even recognize the board or offer drivers.
I have many windows programs I must have for my scientific research!I bought the top of the line Imac with all the bells and whistles because Apple promised that the machine could run Windows 7 in bootcamp natively!
It doesn't. This has been a nightmare of problems.
Is Apple going to step up to the plate and make good on their promises?
Does any one have a fix for any of the audio issues, or know how to install the new drivers without a complete reinstall of Windows?
Installing a few sound drivers and software should not require a complete reinstall. Getting the proper drivers for the headset jack audio in and audio out jack should be the most basic of fixes. Making the audio mixer work should be elementary.
If you are an Apple tech person or an Apple user that can help on these issues, please do!
Thanks, Dr. Duke
An American profesor in Europe.
PS I will post this under Imac windows 7 updates without a reinstall and under
imac Sound issues.

On another thread a few people have responded saying that their imac has the same situation, the cpu is going crazy and the imac gets hot with headphones or speakers plugged in. But this doesn't happen in the mac side.
If you have an late 2009 imac and don't have these audio issues, let us hear from you. If you don't, lay out the problem here.
Here is my last two cents in to the inquiry.
Not only does the cpu run crazy but the imac 27 gets very, very hot. Since I unplugged the headphones, it runs much, much cooler.
Certainly, some Mac engineers should take care of this problem, it seems it is universal on all the imac 27's and from what I gather, the smaller screened cousins too.
Also, we certainly want a stereo mix option for audio in or out, or what is called "what you hear" or wave out. Imac is supposed to be much geared to multimedia apps.
Finally, the mic jack part of the trrs set up MUST be fixed! A lot of manufacturers are going to headset combo jacks as they call them, mic in and stereo out on the same tribanded plug. But, the old single jack for mic in and single jack for stereo out are two tiny parts of the hardware and super inexpensive for the manufacturer. Why in the **** to go to the "advanced" triplug if the **** thing doesn't work.
Mac has a great reputation. I hope they remedy these problems right away.
Anyone whose imac 27 or 24 whose headset plug is working correctly. Let us know! I don't think anyone's is, but I think that few people understand that their cpu is running so much faster with the plug in, plus few even understand the combo jack and the triband, or trrs audio jack! Out of 4 audio technicians I talked to, not one of them knew what a trrs jack was or that you even have a mic in jack as part of the headset jack!
When I told one senior that it worked on the Mac side, he didn't believe for a while, thought my sound might be recorded from the onboard mic, but I proved it to him by tapping iaudibly on my iphone mic headset and and it showing up in garage band clearly and listening to big difference in audio.
As for a usb audio adapter, I am in a neon light environment and find that those adapters are more sensitive to electrical interference. Besides I want to use the headset jack as it was meant to be used!
Thats it.
Again, if anyone using an imac 27 and windows 7 64 or 32 doesnt have these problems, let us know! We are all anxious for a fix!
Best to all!

Audio Issues - Sound stops on youtube vid after a few seconds. Please Help?

What's been happening is weird audio issues, especially youtube related though not only (other web video content has been messed up, but mostly youtube). Right now I am using headphones (1/8" or 3.5mm) through the back of the computer and when I turn on the computer, at first I can hear sound from videos. When I open the speaker icon mixer window in the bottom right, I see green bar moving with the sound on the "speakers" mixer and "Adobe Flash Player" mixer simultaneously.
Then after a few minutes or after having a few tabs open, all of a sudden the audio stops. Oddly enough, usually the video keeps going even thought the audio has stopped. I verified this wasn't a hardware issue with my headphones by opening the Speaker Icon Mixer window, and acutally was watching it at the moment the sound stopped and saw the green bar disappear exactly when the sound stopped.
If I restart the computer, or firefox only sometimes (mostly need to restart cpu though) then videos will play again with sound. Once the sound stops however, if I open a new youtube video in another window, it will sometimes cause an "An error occured. Please try again later" crash.
I'm at a loss of what to do.
Running latest version of Firefox (26.0) and Adobe Flash (11,9,900,170 installed). Windows 7 64 bit system, Intel Core I7 Processor.
I have tried many things include "reset firefox", clear cache, changing to an earlier version of Flash (11.3). Tried to update sound cards. Even tried to restore computer to an earlier setting ( I only went two days ago, could go farther back I suppose).When I reverted back, the problem went away for a few hours but then came right back.
I scanned pc with ESET online antivirus, no viruses, Malewarebytes Pro, no issues. Cleaned with CC cleaner. Plenty of hard drive space (using an SSD boot drive btw).
I am not very knowledable about plugins or "addons" or extenstions. Nor do I know if it has anything do "Firefox Options -> applications" (gives content type and then option...essentially a bunch of sound file types and then which plugin plays it). I can give my list of all this out if necessary but there are quite a few and I dont know how to copy/paste that info so it would take. Even though its gonna take forever to hand type these guys all out, I will give my list of "plugins" that may be audio related:
QuickTime Plugin 7.7.4 7.7.4.0
RealDownloader Plugin 1.3.3.66
RealNetworks (tm)
RealDownloader Chrome Background Extensions Plug-in (32-bit) 1.3.3.66
RealNetworks (tm)
RealDownloader HTML5VideoShim Plug-in (32-bit)
1.3.3.66 RealNetworks (tm)
RealDownloader PepperFlashVideoShim Plug-in (32-bit) 1.3.3.66
RealPlayer Download Plugin 16.0.3.51
RealPlayer(tm) G2 LiveConnect-Enabled Plug-In (32-Bit) 16.0.3.51
Shockwave Flash 11.9.900.170
Shockwave for Director 12.0.7.148 (for netscape plug-in)
Shockwave for Director 12.0.2.122 (for netscape plug-in)
Silverlight Plug-In 5.1.20913.0
VLC Web Plugin 2.1.0.0
When I open my device manager and look at "Sound video and game controllers" I see 4 options:
1)AMD High Definition Audio Device
2) Bluetooth Audio Device
3) High Definition Audio Device
4) Intel (R) Display Audio
I'm not sure what this means, if I have 4 sound cards or if they are conflicting somehow.
I tried to update drivers on each one. No change. I've tried "restarting firefox with addons disabled" and "check here to see if your addons are up to date" (they were except VLC which I did update before restoring to previous day and it didnt help).
None of the fixes work for me, same issues. Extremely frustrated!! Help?

I'm having a similar problem with flash audio. After a few minutes of watching a video or playing a game the audio cuts out but the video keeps working. The audio does not return until I refresh the page. The issue occurs regardless of which browser I'm using (have tired both Firefox and Chrome). Oddly enough, when the audio cuts out from whatever flash application is running, my entire system loses sound until I refresh the webpage or close the browser. For example, I was playing Minecraft with Chrome open in the background and suddenly the sound cut out from both. Once I closed the browser my audio came back. I realized that there was a graphic on the webpage that was flash based which likely triggered the issue.
I do not have any Real plugins.
Incidently I also have Intel (R) Display Audio listed in my device manager
Edit: I forgot to mention, this issue only seems to occure when I watch videos that have been uploaded recently. For some reason the audio does not cut out when I watch a video was uploaded a few months ago.

Lenovo U410 8.1 Audio Issues

I have owned the Lenovo U410 Ideapad for a decent while now and I have been consitently satisfied with its preformance. Recently I uprgraded to Windows 8.1 and it does not play any sound from any source. After some searching I found the software to fix it.
The "Conexant Audio Driver for Windows 8.1 (32-bit, 64-bit) â“ IdeaPad U310, U310 touch, U410,"
So of course I downloaded it, but the problem persists where sound does occur, with every 1/7 videos on Youtube, or sound lasts for moments but nothing is consistent.
Any solutions? It would be immensly appreciated.
Solved!
Go to Solution.

hi Squeaking_Lemur,
Welcome to Lenovo Community Forums!
Is the issue happening on local mp3 files(audio saved on your pc and not through the internet)?
Try opening Device Manager and open Sound, video, and game controllers Uninstall the conexant entry there and restart your system see if that will work.
If still non try this again
Conexant Audio Driver
Let me know your findings
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I have a severe audio issue with netflix

It's a loud stuttering sound glitch that cripples most of the TV shows and movies I try to watch on my ATV.
The audio on a few anime series I've tried works perfectly, but everything else I've tried to play has resulted in this. I've checked a lot of forums, but I can't find anyone else with the issue. http://youtu.be/rH6uX7yVpPY
In case this information helps, here is a list of everything that has and hasn't worked so far.
The videos I've tried that HAVEN'T worked are:
Psycho-pass
Bob's Burgers
Safe Haven
Radio Free Dublith (or something like that)
The Last Days
World War Z
The Avengers
Olympus Has Fallen
The videos that HAVE worked are
Sword Art Online
Soul Eater
Gurren Lagann
As you can see, it seems like it only works for anime, and even that category has videos that don't work (psycho-pass)
I've tried unplugging and plugging everything back in, I've tried resetting the apple tv and updating the software and nothing has worked. I originally thought that it may have been my HDMI to VGA adapter w/ audio jack, but if that's the case, then why does the audio for airplay mirroring, iTunes, music, youtube, and SOME netflix content work perfectly fine? It doesn't seem to add up. I've tested the same video on all my other devices and the sound only does this on the ATV.
It's a 2nd generation ATV with the latest iOS.
I'm pulling my hair out with this, it's stupid.

Yeah, Plugging it into a TV made Psycho-Pass audio work. I don't understand though, why the audio worked for some media and not others, and why it only effected netflix? Could you maybe point me to an HDMI to VGA Adapter w/ audio separator that I can use instead? I had it set up that way so that #1 I could listen to music without turning on a tv and #2 so that I could plug it into my projector which lacks an HDMI port.

How do I tell Apple to fix their software like apps that play sound even though the sound is turned off and not being able to disable features you hate like game center

Apple is suppose to be the pinnacle of usability and, yet, I want to throw my new IPhone 4s as far as I can and watch is smash into a million pieces on concrete. Seriously, I've already got three things that irritate the **** out of me. First, there are Apple apps that insist on playing sound even though the sound is turned off. If I flick a switch to turn the sound off, I want the sound off!!!! Second, if I do not want a totally unnecessary feature like Game Center, I should be able to disable it. I completed most of the Angry Bird levels with 2 or 3 stars and now I have to start over from square one. Maybe, this happened when I upgraded to the 4s but it sure seemed to happen when I joined Game Center. Tomorrow, I am going to reset my 4s to factory defaults to try to get rid of my Game Center account. I don't want Game Center! I do need Game Center! I hate Game Center! Finally, I had an alarm go off to wake me up and there was a Snooze button but no button to turn the alarm off. I flicked the slider to access the main screen expecting to see something to turn the alarm off but there was nothing. The alarm just kept alarming. I had to warm boot my IPhone to shut the alarm off! Really, Apple!!!!

The sound is turned off. Only, some Apple apps like YouTube and Siri make sound when the sound is turned off. It is very embarrassing when this happens at work. My question was how do I tell Apple to fix this?
Turning off game center does not work. The games just prompt me to sign in when they are started.I have tried everything I can find online to stop this behavior. It is annoying and should not happen. My question was how do I tell Apple to fix this?
The alarm went off. There was a green thing that looked like a button but pressing it did nothing. There was a red button that said snooze. I did not want to snooze. I wanted to turn the alarm off. I slid the bar to unlock the phone and there were no running apps with a button to press. The alarm just keep running. I have not had this problem since it first occurred. The alarm now shuts off when I just unlock the phone. It may have happened because I had another alarm app running. The two may have interfered with each other. I would like to tell Apple about it.
It also annoys me that the button that closes apps leaves the phone app running. If I press on a number at 6:00 AM to get information about who called me, the phone automatically dials the person back and my natural reaction is to press on the button to close the phone app but the phone keeps dialing this person at 6:00 AM. It is a bad design. I would like to tell Apple about it.
Finally, I looked all over Apple's site to try to find someplace I could send them a polite message to let them know that I was not happy with these "features" but could not find anything. It is extremely frustrating to have issues with a product and not being able to tell the manufacturer about it. So, you grow up!.
When trying to fix the Game Center issue, I saw a link someone posted to report issues with the IPad to Apple. The answer I am looking for is where is the link to report issues with the IPhone.

XML Audio Issue - brings in 1A and not 2A

Similar Messages

Maybe you are looking for