XML based Adobe form is not allowing to input values while display on IE
Hi Experts
I have intergarted an XML based adobe form in webdynpro with inputs fields and submit button.
But on display on Internet expolrer it doesn't allow to input values even button dosen't work.
Please help me how would it will allow to input values .
Many thanks in advance
hi dear
yes the enabled property is checked but still form doesn't allow to enter value and submit button is also disabled.
Is there any setting or some program code is required.
It would be great if some body can help us in this ....
many thanks in advance.
thanks
Similar Messages
-
ADOBE Interactive Form in webdynpro not allowing to enter value
Hi,
I have developed a Adobe interactive form in SFP and then i developed webdynpro component , then integrated into webdynpro. while running the webdynpro application which is showing the adobeform but the input fields are not allowed to enter value.
The same adobe form can be allowed to enter values while running from the report. i dunno how to set the value of the importing parameter fillable = 'X' in webdynpro.
regards,
RoopsHi friends,
The above mentioned setting are all active like Zc...Layout, enabled check box etc.. but when i make it to Activex which is not displaying form in the portal while running the application instead it shows red color X mark.. is there any setting required to run adobe with webdynpro ..
1.) any notes or patches ???
2.) is activex mandatory for running interactive form in webdunpro? if yes what are system setting required....
Regards,
Roops. -
how to find and replace data in form fields in acrobat xi, its not allowing to do so while trying, asking for adobe livecycle to get installed. please help.
Easiest way to do it is the following:
- Open the PDF file in Acrobat.
- Go to Tools - Forms - More Form Options - Export Data.
- Save the form data as an XML file somewhere on your system.
- Open XML the file in a plain-text editor (I recommend Notepad++).
- Let's say you want to replace all the years in the dates from "2013" to "2014". Do a global Search&Replace of "2013-" to "2014-" (I added the dash just to make sure that only date fields are edited).
- Save the XML file (maybe under a new name).
- Go back to the PDF file, and now go to Tools - Forms - More Form Options - Import Data.
- Select the edited XML file and import it.
- Done! -
Dynamic element binding between XML based PDF form and WDA context
Hi Experts,
I am working on a XML based interactive form.There is a table node in the XML interface which generated by WDA context, and binding on a subform in the PDF form.
I tried to add instances to the subform using javascript. Unfortunately, I can not get the internal table in WDA.
If I initialize the table to 10 lines in WDA , and then add 5 line to it in PDF, when I submit the PDF, I can only get 10 lines in the WDA framework. It seems that the element which is create dynamically can not be past to the interface.
Could you tell me why? And is there any other better solution? I just want build a table in PDF form in runtime and pass it to WDA context.
Thanks a lot!
Best Regards,
Guo Guo QingHi Thomas,
Thank you for your reply.
I think the performance will be a problem if I create the elment in WDA using submit event. I need to create hundreds of record dynamically. I must find some way to reduce the communication between the WDA and PDF form. Maybe I can set a container with a number of elements before the PDF output. Do you have some better ideas?
Best Regards,
Guo Guo Qing -
My account is in usa but I want to enter an international credit card, but the form does not allow me. How do I have to proceed
chi45,
You must have your iTunes and App Stores set to the same country that your billing information is based in (i.e.: must use a US credit card in US iTunes and App Stores).
If you move to another country, you need to change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account. Otherwise, your credit card might not work as payment. For example, only German credit cards can be used to buy content from the German iTunes and App stores.
Can't change the country of your iTunes Store, App Store, iBooks Store, or Mac App Store account
https://support.apple.com/en-us/HT204447
Cheers,
Allen -
Org.xml.sax.SAXParseException: Content is not allowed in prolog.
Hi All,
Currently i m doing some practice on JSTL and following few examples from this link http://java.sun.com/developer/technicalArticles/javaserverpages/faster/
while doing xml-ex1.jsp
This is xml-ex1.jsp code
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
<%@ taglib prefix="x" uri="http://java.sun.com/jstl/xml" %>
<html>
<head>
<title>JSTL Support for XML</title>
</head>
<body bgcolor="#FFFFCC">
<h3>Books Info:</h3>
<c:set var="xmltext">
<books>
<book>
<title>Book Title A</title>
<author>A. B. C.</author>
<price>17.95</price>
</book>
<book>
<title>Book Title B</title>
<author>X. Y. Z.</author>
<price>24.99</price>
</book>
</books>
</c:set>
<x:parse xml="${xmltext}" var="output"/>
<b>The title of the first book is</b>:
<x:out select="$output/books/book[1]/title"/>
<br>
<b>The price of the second book</b>:
<x:out select="$output/books/book[2]/price"/>
</body>
</html>
While running jsp page i m getting follwing error
SEVERE: Servlet.service() for servlet jsp threw exception
org.xml.sax.SAXParseException: Content is not allowed in prolog.
at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at org.apache.taglibs.standard.tag.common.xml.ParseSupport.parseInputSource(ParseSupport.java:227)
at org.apache.taglibs.standard.tag.common.xml.ParseSupport.parseInputSourceWithFilter(ParseSupport.java:193)
at org.apache.taglibs.standard.tag.common.xml.ParseSupport.parseReaderWithFilter(ParseSupport.java:199)
at org.apache.taglibs.standard.tag.common.xml.ParseSupport.parseStringWithFilter(ParseSupport.java:206)
at org.apache.taglibs.standard.tag.common.xml.ParseSupport.doEndTag(ParseSupport.java:138)
at org.apache.jsp.jsp.xml_002dex1_jsp._jspx_meth_x_parse_0(org.apache.jsp.jsp.xml_002dex1_jsp:152)
at org.apache.jsp.jsp.xml_002dex1_jsp._jspService(org.apache.jsp.jsp.xml_002dex1_jsp:70)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at
NOTE :- I m using Tomcat 5.5.14 .
Please help me out how to resolve this problem
Thanks & Regards
Rupesh KumarFrom what I understand, it has nothing to do with your JSP and all to do with the XML it's supposed to parse. It sounds malformed. Check the first tag.
-
SRM PO failed: Indicator for GR-based invoice verification used not allowed
Hi Friends,
I have an issue with a specific PO failed to transfer from SRM to ECC. We are in ECS scenario, SRM 5.0 Service level 7.0. We are in process of SP upgrade but this issue occured in Production system which is still in old SP level(SP 7.0).
when I check the App Monitor, I am see the following errors: but the status shows Auto_Completed
1. PO: Indicator for GR-based invoice verification used not allowed
2. PO: Instance XXXXXXXXXX of object type PurchaseOrder could not be changed
3. PurchOrder XXXXXXXXXX: Purchase order still contains faulty items
4. PO XXXXXXXX: Indicator for GR-based invoice verification used not allowed
I can see the PO copied over to ECC. but status in SRM PO shows 'Error in Process'.
BBP_PD for object PO shows: Created, complete, ordered, In Transfer to Execute, Change was Transmitted as Inactive status. Transfer Failed shows Active, Document completed, created.
I checked BP Maintain for the vendor and PO and its no different than other POs and Vendors except Vendor had 'Goods Receipt based Invoice Verification' indicator checked in SRM.
I tried to simulate the same Material, Vendor with GR-IV indicator both on and off, it works fine. Ofcourse this is in Quality box with SP 15 level.
So, I am not sure if SP level upgrade might help it or not? If there are any other means to test, please advise.
thanks
RaoI was wondering how I could liquidate the PO by either creating a new PO or ??.
What you could do to revive the PO in question is that after the upgrade, and after a round of background jobs run for CLEAN_REQREQ_UP and BBP_GET_STATUS_2, ask the buyer to make a dummy change to the PO (for example, change the description of the PO) and order again. This would trigger the transfer to the backend again. And hopefully this time, no error would occur. -
Org.xml.sax.SAXParseException: Reference is not allowed in prolog
Hi,
I have been using DocumentBuilder to parse an xml string in our application but now came up with this exception:
org.xml.sax.SAXParseException: Reference is not allowed in prolog
When I looked at the xml data, I found that it does not have a prolog in it. I also found that the data contains end of line character ""
""
" in it.
This the xml to be parsed: (Qutoted them to view the unicodes in xml)
"<dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/">
<dc:title xml:lang="en">Test metadata</dc:title>
<dc:language>en</dc:language>
<dc:description xml:lang="en">Blah</dc:description>
<dc:creator>BEGIN:vcard
FN:Jan Austin
ORG:IBalahblahLtd
EMAIL:[email protected]
END:vcard</dc:creator>
<dc:format>text/html</dc:format>
<dc:identifier>http://gg.com/</dc:identifier>
<dc:subject>Medicine and Dentistry</dc:subject>
</dc:dc>"
And in the class, I used,
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
factory.setNamespaceAware(true);
DocumentBuilder builder = factory.newDocumentBuilder();
Document document = builder.parse(file);I can not change the xml data to be parsed as the application gets this data from other targets through a web service.
So, can anyone provide any suggestions to solve this issue please?
Thanks,
Shiv.I have tried various options by
1. factory.setIgnoringElementContentWhitespace(true);
2. factory.setValidation(false);
But, none of them seems to work.
Could anyone please giv me atleast a gist abt where to look about?
Cheers,
Shiv. -
Org.xml.sax.SAXParseException: Content is not allowed in prolog Error
Hello,
this is pratap.<br>
i was trying rules using decision tables with 'call charges' example<br>.
after filling the text fields i am getting an error org.xml.sax.SAXParseException: Content is not allowed in prolog<br>.
Can any one please tell me what are the reasons for this error and how to correct it<br>.
thank you.Problem solved.There was some problem in xml file i corrected it and it worked.Sorry for asking silly question.
-
I need to use query-database functionality in transform activity to make a stored function call. My sql query parameter should be
Select CDMB_BPEL_UTILS_PKG.get_coa(null) from dual
Corresponding XML is
?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://www.example.org" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap" xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20" xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:ora="http://schemas.oracle.com/xpath/extension" xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc" exclude-result-prefixes="xsl ns0 xsd ldap xp20 bpws ora orcl">
<xsl:template match="/">
<ns0:OracleRoot>
<ns0:OracleMappedOut>
<ns0:ExpType>
<xsl:value-of select="orcl:query-database('select cdmb_bpel_utils_pkg.get_coa(null) from dual',false(),false(),'eis/JNDI/GDB2')"/>
</ns0:ExpType>
</ns0:OracleMappedOut>
=========But I get the following error when testing the same===========
oracle.xml.sql.OracleXMLSQLException: Character ')' is not allowed in an XML tag name
========================================================
I guess I need to use escape characters to pass ( . I tried using " and ' but in vain. Any help is appreciated to resolve this issue.Siva,
version: 10.1.3.4
Your inputs may be of high use for me as well.
I have similar requirement. I have to execute the following sql query
select sum(salary) from emp. When I run this query using ora:orcl:query-database, I got the same exception what you have got. So do you mean if i use an alias for this, it would solve my pbm?
select sum(salary) sal from emp+
rgds,
sen -
Why does adobe reader 11 not allow you tube videos to be viewed on my MAC?
Adobe reader does not allow me to view you tube videos on my MAC. Why?
Every time I install the newest version, for whatever reason, if I want to watch a video, I get a missing plug in message. I don't get the usual "allow or deny" message with it, it just won't allow me to view the video. I watch a lot of art lessons on line and participate in blogs and this becomes very frustrating. The odd thing, is that when I un-install Adobe 11, I can view the videos but, of course, then I can't download PDF files. The weird thing is, other people in my neighborhood are having the same issue and don't know what to do about it. I may just download an earlier version of Adobe because I didn't have this issue until I updated it some months back. Maybe my 6 year old MAC can't handle the technology even though I am running on the latest Safari version?
-
Why does my new Adobe Reader XI not allow double sided printing?
Why does my new Adober Reader XI not allow double sided printing as the previous version did?
Moving this discussion to the Scanning & OCR forum.
-
Adobe Flash Player not allowed
When trying to open a video I always get this message 'Adobe Flash Player not allowed". If I right click I get a message saying "allow this plug in". I click that and the video works. Sometimes the right click does nothing, so I cannot view the video.
Adblock Plus 1.4
Checker Plus for Gmail 12.0
Chrome to Mobil 1.0.0
Fastest Chrome Browse faster 7.0.3
Google Chrome to Phone Extension 2.3.1
Google Dictionary 3.0.17
Google Docs 0.5
Google Translate 1.2.4
Invisible Hand 3.8 31
Shopping Assistant 3.5.0.2
Solitaire 1.4.3
Thank you! -
Adobe reader will not allow me to down load file because it says i must sign agreement which I did
adobe reader will not allow me to down load file because it says i must sign agreement which I did
Perhaps you have Adobe Acrobat, which can do everything Reader can do.
-
Hello, I am trying to download the evaluation version of Lightroom but i have an error message.My "plate forme" is not allowed. I have a Mac OS version 10.8.6 . Thanks for helping!
Hi Barbara Satre,
Kindly check System requirements | Lightroom
Thanks,
Atul Saini
Maybe you are looking for
-
Updated to BIOS 1.9, Got some new BIOS Setting??
hey... I was previously runnin on the 1.4 BIOS ver and flashed to the 1.9 release and after that i got this option under Voltage Settings for Speed Performance or somehting like that. it had options like Slow, Fast , Ultra Fast and one more th
-
OS 4.0.1 installed, it's crashed my phone and now it won't do ANYTHING
Please help! I have just connected my phone to iTunes to get everything synced and up to date. ITunes said new software was available (OS 4.0.1) so I agreed to download that....then an error message came up on screen saying could not be completed (I
-
Unwanted paths showing after cropping to make a repeat pattern tile.
I'm trying to make a repeat pattern tile (using CS5 on Windows 7), but when I crop the pattern, the expanded paths underneath become visible as on the flowers below. This is what I did after creating the artwork: Used the rectangle tool to make a box
-
Lightroom Icon missing in Creative Cloud
I have the $9.99 a month plan for Photoshop. This also gives me Bridge and Lightroom. I have downloaded all three and they are working fine. However the Lightroom Icon has disappeared from the Creative Cloud module. I have checked the Apps section an
-
Problem in Downloading the trial version. It says Download Error.
I have issues in Downloading the trail version. The Creative Cloud keeps saying Download Error.Please Retry to try again