XML C++ Parser in Solaris 2.6 could not parse with base64

I am using XML C++ Parser (version 2.0.4) in Solaris 2.6
I am using the following definition in dtd file to process binary data.
<!ELEMENT Agent (base64)>
I have two problem from xmlparse() function.
1. This declaration always produces a warning:
LPX-00103: warning: document structure does not match DTD.
2. This causes the parser to fail completely if the corresponding data is empty. This field needs to be optional.
Any ideas how to handle this situation.
Thanks in advance
Vijay Kumar

You can either turn off validation or read section 3.2 of http://www.w3.org/TR/1998/REC-xml-19980210 on how to write a proper DTD.
null

Similar Messages

  • XML C++ Parser in Solaris 2.6 could not parse with encoding UTF-16

    I tried to use UTF-16 encoding in the XML C++ Parser in Solaris 2.6.
    xmlinit() fails and returns error 201 - i.e.Unknown encoding. Though the ORACLE documentation has many encodings including UTF-16. Quite a few of these encodings are not working.
    Can any one help about UTF-16.
    Thanks
    Vijay Kumar

    Do you have Oracle's NLS data files?

  • Windows 8.1 having same issue: Windows could not parse or process unattend answer file (C:\Windows\Panther\unattend.xml) for pass [specialize]. A component or setting specified in the answer file does not exist.

    I know there are similar other issues with IE 10 and Windows 7.  This is WINDOWS 8.1, and the IE Welcome message is totally absent from the default unattend.xml in the c:\windows\panther directory.  In fact, I did a sysprep without using any injected
    unattend.xml - this is the Microsoft Default!
    So I suspect this will start appearing all over again soon.  Anyone figure out what was causing it?
    Here is the new Specialize section from the xml:
    <settings pass="specialize">
            <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <SkipAutoActivation>true</SkipAutoActivation>
            </component>
            <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <SkipAutoActivation>true</SkipAutoActivation>
            </component>
            <component name="Microsoft-Windows-SQMApi" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <CEIPEnabled>0</CEIPEnabled>
            </component>
            <component name="Microsoft-Windows-SQMApi" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <CEIPEnabled>0</CEIPEnabled>
            </component>
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <!--<CopyProfile>true</CopyProfile>-->       
                <ComputerName>Win8</ComputerName>
                <TimeZone>Pacific Standard Time</TimeZone>
            </component>
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <!--<CopyProfile>true</CopyProfile>-->         
                <ComputerName>Win8</ComputerName>
                <TimeZone>Pacific Standard Time</TimeZone>
            </component>
            <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <RunSynchronous>
                   <!--<RunSynchronousCommand wcm:action="add">
                        <Order>1</Order>
                        <Description>Disable UAC for Users</Description>
                        <Path>reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System" /v "EnableLUA"  /t REG_DWORD /d
    0 /f</Path>
                    </RunSynchronousCommand>
                    <RunSynchronousCommand wcm:action="add">
                        <Order>2</Order>
                        <Description>Disable UAC for Admin</Description>
                        <Path>reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System" /v "FilterAdministratorToken" /t REG_DWORD
    /d 0 /f</Path>
                    </RunSynchronousCommand>-->
                    <RunSynchronousCommand wcm:action="add">
                        <Description>Enable Admin Account</Description>
                        <Order>3</Order>
                        <Path>net user administrator /active:yes</Path>
                    </RunSynchronousCommand>
                    <RunSynchronousCommand wcm:action="add">
                        <Path>powercfg -h off</Path>
                        <Order>4</Order>
                    </RunSynchronousCommand>               
                    <RunSynchronousCommand wcm:action="add">
                        <Order>5</Order>
                        <Path>cmd /c %WINDIR%\Setup\Specialize_x64.cmd</Path>
                    </RunSynchronousCommand>                
                </RunSynchronous>
            </component>
            <component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <RunSynchronous>
                   <!--<RunSynchronousCommand wcm:action="add">
                        <Order>1</Order>
                        <Description>Disable UAC for Users</Description>
                        <Path>reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System" /v "EnableLUA"  /t REG_DWORD /d
    0 /f</Path>
                    </RunSynchronousCommand>
                    <RunSynchronousCommand wcm:action="add">
                        <Order>2</Order>
                        <Description>Disable UAC for Admin</Description>
                        <Path>reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System" /v "FilterAdministratorToken" /t REG_DWORD
    /d 0 /f</Path>
                    </RunSynchronousCommand>-->
                    <RunSynchronousCommand wcm:action="add">
                        <Description>Enable Admin Account</Description>
                        <Order>3</Order>
                        <Path>net user administrator /active:yes</Path>
                    </RunSynchronousCommand>
                    <RunSynchronousCommand wcm:action="add">
                        <Path>powercfg -h off</Path>
                        <Order>4</Order>
                    </RunSynchronousCommand>               
                    <RunSynchronousCommand wcm:action="add">
                        <Order>5</Order>
                        <Path>cmd /c %WINDIR%\Setup\Specialize_x86.cmd</Path>
                    </RunSynchronousCommand>                
                </RunSynchronous>
            </component>
             <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
    xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <BlockPopups>yes</BlockPopups>
                <CompanyName>FYM Inc</CompanyName>
                <DisableAccelerators>true</DisableAccelerators>
                <DisableDevTools>false</DisableDevTools>
                <DisableFirstRunWizard>true</DisableFirstRunWizard>
                <DisableOOBAccelerators>true</DisableOOBAccelerators>
                <DisableWelcomePage>true</DisableWelcomePage>
                <EnableLinksBar>false</EnableLinksBar>
                <FavoritesDelete>true</FavoritesDelete>
                <FilterLevel>High</FilterLevel>
                <Help_Page>www.google.com</Help_Page>
                <Home_Page>www.google.com</Home_Page>
                <LockToolbars>false</LockToolbars>
                <MSCompatibilityMode>false</MSCompatibilityMode>
                <NoDial>true</NoDial>
                <ShowCommandBar>true</ShowCommandBar>
                <ShowInformationBar>true</ShowInformationBar>
                <SuggestedSitesEnabled>false</SuggestedSitesEnabled>
                <SearchScopes>
                    <Scope wcm:action="add">
                        <DisplayQuickPick>true</DisplayQuickPick>
                        <ScopeDefault>true</ScopeDefault>
                        <ScopeDisplayName>Google</ScopeDisplayName>
                        <ScopeKey>Search1</ScopeKey>
                        <ScopeUrl>http://www.google.com/advanced_search?hl=en</ScopeUrl>
                        <ShowSearchSuggestions>true</ShowSearchSuggestions>
                        <ShowTopResult>true</ShowTopResult>
                    </Scope>
                </SearchScopes>
            </component>
            <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <BlockPopups>yes</BlockPopups>
                <CompanyName>FYM Inc</CompanyName>
                <DisableAccelerators>true</DisableAccelerators>
                <DisableDevTools>false</DisableDevTools>
                <DisableFirstRunWizard>true</DisableFirstRunWizard>
                <DisableOOBAccelerators>true</DisableOOBAccelerators>
                <DisableWelcomePage>true</DisableWelcomePage>
                <EnableLinksBar>false</EnableLinksBar>
                <FavoritesDelete>true</FavoritesDelete>
                <FilterLevel>High</FilterLevel>
                <Help_Page>www.google.com</Help_Page>
                <Home_Page>www.google.com</Home_Page>
                <LockToolbars>false</LockToolbars>
                <MSCompatibilityMode>false</MSCompatibilityMode>
                <NoDial>true</NoDial>
                <ShowCommandBar>true</ShowCommandBar>
                <ShowInformationBar>true</ShowInformationBar>
                <SuggestedSitesEnabled>false</SuggestedSitesEnabled>
                <SearchScopes>
                    <Scope wcm:action="add">
                        <DisplayQuickPick>true</DisplayQuickPick>
                        <ScopeDefault>true</ScopeDefault>
                        <ScopeDisplayName>Google</ScopeDisplayName>
                        <ScopeKey>Search1</ScopeKey>
                        <ScopeUrl>http://www.google.com/advanced_search?hl=en</ScopeUrl>
                        <ShowSearchSuggestions>true</ShowSearchSuggestions>
                        <ShowTopResult>true</ShowTopResult>
                    </Scope>
                </SearchScopes>
            </component>
             <component name="Microsoft-Windows-RemoteAssistance-Exe" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
    xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                    <fAllowFullControl>true</fAllowFullControl>
                    <fAllowToGetHelp>true</fAllowToGetHelp>
             </component>
             <component name="Microsoft-Windows-RemoteAssistance-Exe" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
    xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                    <fAllowFullControl>true</fAllowFullControl>
                    <fAllowToGetHelp>true</fAllowToGetHelp>
             </component>
             <component name="Microsoft-Windows-ErrorReportingCore" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
    xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <DisableWER>1</DisableWER>
             </component>
             <component name="Microsoft-Windows-ErrorReportingCore" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
    xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <DisableWER>1</DisableWER>
             </component>         
            <component name="Microsoft-Windows-powercpl" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                 <!--  High Performance -->
                 <PreferredPlan>8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c</PreferredPlan>
                 <!--  Power saver -->
                 <!--  <PreferredPlan>a1841308-3541-4fab-bc81-f71556f20b4a</PreferredPlan> -->
                 <!--  Balenced -->
                 <!--  <PreferredPlan>381b4222-f694-41f0-9685-ff5bb260df2e</PreferredPlan> -->
            </component>
            <component name="Microsoft-Windows-powercpl" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                 <PreferredPlan>8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c</PreferredPlan>
            </component>      
            <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <Identification>
                    <JoinWorkgroup>Workgroup</JoinWorkgroup>
                </Identification>
            </component>
            <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <Identification>
                    <JoinWorkgroup>Workgroup</JoinWorkgroup>
                </Identification>
            </component>                
            <component name="Microsoft-Windows-AllUserInstallAgent" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
    xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <LogonWaitForPackageRegistration>false</LogonWaitForPackageRegistration>
            </component>
            <component name="Microsoft-Windows-AllUserInstallAgent" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <LogonWaitForPackageRegistration>false</LogonWaitForPackageRegistration>
            </component>        
        </settings>
    I'm thinking of dumping the entire IE section and see what happens.

    I too received this error as I tried to run my first Windows 8.1 deployment. Per another post I commented out this line
    <IEWelcomeMsg>false</IEWelcomeMsg>
    from the IE section of the unattend.xml. I was then able to run my deployment. I do not see this line in your posting though.
    I referenced this link even though it was for Windows 7.
    http://social.technet.microsoft.com/Forums/en-US/c41a2b69-a591-4cd3-86ab-6a0f8a73b858/getting-windows-could-not-parse-or-process-the-unattend-answer-file-for-pass-specialize-with?forum=mdt
    Hope this helps someone.
    JayTheTech
    To clarify, I edited the unattend.xml file from from Deployment Share, not C:\Windows\Panther.
    DS\control\task sequence ID\unattend.xml
    JayTheTech

  • Could not parse deployment descriptor: org.xml.sax.SAXParseException

    I am using Taglib in JSP file .
    I am calling the AbcTagLib from my jsp Login.jsp file.
    The entries for the taglib is there in web.xml file.
    Please see the attachments.
    I am getting the following errors while running my JSP file:
    Parsing of JSP File '/jsp/Login.jsp' failed:
    /jsp/Login.jsp: Could not parse deployment descriptor: org.xml.sax.SAXParseException:
    Could not parse: taglib starting at line 1
    probably occurred due to an error in /jsp/Login.jsp:
    <%@ taglib uri="AbcTagLib" prefix="abc" %>
    Please look in to it and suggest some solution.
    The files are :
    AbcTagLib.tld
    <?xml version="1.0" encoding="ISO-8859-1" ?>
    <!DOCTYPE taglib PUBLIC "-//Sun Microsystems, Inc. //DTD JSP Tag Library 1.1//EN"
    "web-jsptaglib_1_1.dtd">
    <taglib>
    <tlibversion>1.0</tlibversion>
    <jspversion>1.1</jspversion>
    <shortname>TagLib</shortname>
         <tag>
         <name>label</name>
         <tagclass>com.abc.internet.common.taglib.LiteralTag</tagclass>
         <bodycontent>empty</bodycontent>
         <info>This is a simple tag for ABC</info>
              <attribute>
                   <name>name</name>
                   <required>false</required>
                   <rtexpvalue>false</rtexpvalue>
              </attribute>
         </tag>
         <tag>
         <name>linkAccess</name>
         <tagclass>com.abc.internet.common.taglib.LinkAccessTag</tagclass>
         <bodycontent>JSP</bodycontent>
         <info>this is the tag class for showing the button</info>
         <attribute>
         <name>linkId</name>
         <required>true</required>
         <rtexpvalue>false</rtexpvalue>
         </attribute>
         <attribute>
         <name>flag</name>
         <required>true</required>
         <rtexpvalue>false</rtexpvalue>
         </attribute>
         </tag>
    </taglib>
    web.xml
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE web-app PUBLIC '-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN'
    'file:///D:/bea/wlserver6.0sp1/web-app_2_2.dtd'>
    <web-app>
    <taglib>
    <taglib-uri>AbcTagLib</taglib-uri>
    <taglib-location>/WEB-INF/AmsTagLib.tld</taglib-location>
    </taglib>
    </web-app>
    Login.jsp
    <%@ page language="Java" errorPage="/jsp/AbcJspError.jsp" import="java.util.Vector,com.abc.internet.common.util.UtilFunctions,com.abc.internet.welcome.form.LoginForm,com.abc.internet.common.util.*"%>
    <%@ taglib uri="AbcTagLib" prefix="abc" %>
    <%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html" %>
    <HTML>
    <HEAD>
         <TITLE>LOGIN SCREEN</TITLE>
         <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
    </HEAD>
    <BODY class="imgSpacerTan" onUnload="javascript:funcCloseErrorWindow();">
    <html:form action="/struts/Login" name="LoginForm" type="com.abc.internet.welcome.form.LoginForm"
    onsubmit="onLogin()">
         <table align="center" cellpadding=0 cellspacing=0 border=0 class="imgSpacerTan">
              <tr>
                   <td align="left">
                        <img border="0" src="../images/logo.gif">
                   </td>
              </tr>
         </table>
         <table align="center" cellpadding=0 cellspacing=0 border=0 class="imgSpacerTan">
              <tr> <td ALIGN="center" class="header" height=30px><font class="fontBlue" >Welcome
    to the</font></td></tr>
              <tr> <td ALIGN="center" class="header" height=30px><font class="fontBlue" >ABC
    System</font></td></tr>
              <tr> <td ALIGN="center" class="header" height=20>  </td></tr>
         </table>
         <table cellpadding=0 cellspacing=0 border=5 bordercolor="#293163" class="deadlineHistoryTablebgcolor"
    align="center">
              <tr class="deadlineHistoryTablebgcolor">
                   <td class="deadlineHistoryTablebgcolor">
                        <table cellpadding=10 cellspacing=10 border=0 width="400" class="deadlineHistoryTablebgcolor"
    align="center">
                             <tr>
                                  <td>
                                       <script language="javascript">
                                            if(navigator.appName.indexOf("Netscape") != -1)
                                                      document.write('<table cellpadding=0 cellspacing=0 border=1 width="400"
    bordercolor="#293163" class="deadlineHistoryTablebgcolor" align="center">');
                                            else
                                                      document.write('<table cellpadding=0 cellspacing=0 border=1 width="400"
    bordercolorlight="#293163" class="deadlineHistoryTablebgcolor" align="center">');
                                       </script>
                                            <tr>
                                                 <td>
                                                      <table cellpadding=7 cellspacing=7 border=0 width="400" bordercolor="#293163"
    class="deadlineHistoryTablebgcolor" align="center">
                                                           <tr>
                                                                <td>
                                                                     <font class="fontBlue">   USER ID       &nbsp:  </font><input
    type="text" name="iv-user">
                                                                </td>
                                                           </tr>
                                                      </table>
                                                 </td>
                                            </tr>
                                       </table>     
                                  </td>
                             </tr>
                             <tr>
                                  <td>
                                       <table cellpadding=0 cellspacing=0 border=1 width="400" class="borderBlue"
    class="deadlineHistoryTablebgcolor" align="center">
                                            <tr>
                                                 <td>
                                                      <table cellpadding=7 cellspacing=7 border=0 width="400" class="borderBlue"
    class="deadlineHistoryTablebgcolor" align="center">
                                                           <tr>
                                                                <td align="center" ><input type="submit" value="Submit" onclick="return
    (onLogin())" ></td>
                                                           </tr>
                                                      </table>
                                                 </td>
                                            </tr>
                                       </table>
                                  </td>
                             </tr>
                        </table>
                   </td>
              </tr>
         </table>
    </html:form>     
    </body>
    </html>
    Thanks

    I am using Taglib in JSP file .
    I am calling the AbcTagLib from my jsp Login.jsp file.
    The entries for the taglib is there in web.xml file.
    Please see the attachments.
    I am getting the following errors while running my JSP file:
    Parsing of JSP File '/jsp/Login.jsp' failed:
    /jsp/Login.jsp: Could not parse deployment descriptor: org.xml.sax.SAXParseException:
    Could not parse: taglib starting at line 1
    probably occurred due to an error in /jsp/Login.jsp:
    <%@ taglib uri="AbcTagLib" prefix="abc" %>
    Please look in to it and suggest some solution.
    The files are :
    AbcTagLib.tld
    <?xml version="1.0" encoding="ISO-8859-1" ?>
    <!DOCTYPE taglib PUBLIC "-//Sun Microsystems, Inc. //DTD JSP Tag Library 1.1//EN"
    "web-jsptaglib_1_1.dtd">
    <taglib>
    <tlibversion>1.0</tlibversion>
    <jspversion>1.1</jspversion>
    <shortname>TagLib</shortname>
         <tag>
         <name>label</name>
         <tagclass>com.abc.internet.common.taglib.LiteralTag</tagclass>
         <bodycontent>empty</bodycontent>
         <info>This is a simple tag for ABC</info>
              <attribute>
                   <name>name</name>
                   <required>false</required>
                   <rtexpvalue>false</rtexpvalue>
              </attribute>
         </tag>
         <tag>
         <name>linkAccess</name>
         <tagclass>com.abc.internet.common.taglib.LinkAccessTag</tagclass>
         <bodycontent>JSP</bodycontent>
         <info>this is the tag class for showing the button</info>
         <attribute>
         <name>linkId</name>
         <required>true</required>
         <rtexpvalue>false</rtexpvalue>
         </attribute>
         <attribute>
         <name>flag</name>
         <required>true</required>
         <rtexpvalue>false</rtexpvalue>
         </attribute>
         </tag>
    </taglib>
    web.xml
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE web-app PUBLIC '-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN'
    'file:///D:/bea/wlserver6.0sp1/web-app_2_2.dtd'>
    <web-app>
    <taglib>
    <taglib-uri>AbcTagLib</taglib-uri>
    <taglib-location>/WEB-INF/AmsTagLib.tld</taglib-location>
    </taglib>
    </web-app>
    Login.jsp
    <%@ page language="Java" errorPage="/jsp/AbcJspError.jsp" import="java.util.Vector,com.abc.internet.common.util.UtilFunctions,com.abc.internet.welcome.form.LoginForm,com.abc.internet.common.util.*"%>
    <%@ taglib uri="AbcTagLib" prefix="abc" %>
    <%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html" %>
    <HTML>
    <HEAD>
         <TITLE>LOGIN SCREEN</TITLE>
         <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
    </HEAD>
    <BODY class="imgSpacerTan" onUnload="javascript:funcCloseErrorWindow();">
    <html:form action="/struts/Login" name="LoginForm" type="com.abc.internet.welcome.form.LoginForm"
    onsubmit="onLogin()">
         <table align="center" cellpadding=0 cellspacing=0 border=0 class="imgSpacerTan">
              <tr>
                   <td align="left">
                        <img border="0" src="../images/logo.gif">
                   </td>
              </tr>
         </table>
         <table align="center" cellpadding=0 cellspacing=0 border=0 class="imgSpacerTan">
              <tr> <td ALIGN="center" class="header" height=30px><font class="fontBlue" >Welcome
    to the</font></td></tr>
              <tr> <td ALIGN="center" class="header" height=30px><font class="fontBlue" >ABC
    System</font></td></tr>
              <tr> <td ALIGN="center" class="header" height=20>  </td></tr>
         </table>
         <table cellpadding=0 cellspacing=0 border=5 bordercolor="#293163" class="deadlineHistoryTablebgcolor"
    align="center">
              <tr class="deadlineHistoryTablebgcolor">
                   <td class="deadlineHistoryTablebgcolor">
                        <table cellpadding=10 cellspacing=10 border=0 width="400" class="deadlineHistoryTablebgcolor"
    align="center">
                             <tr>
                                  <td>
                                       <script language="javascript">
                                            if(navigator.appName.indexOf("Netscape") != -1)
                                                      document.write('<table cellpadding=0 cellspacing=0 border=1 width="400"
    bordercolor="#293163" class="deadlineHistoryTablebgcolor" align="center">');
                                            else
                                                      document.write('<table cellpadding=0 cellspacing=0 border=1 width="400"
    bordercolorlight="#293163" class="deadlineHistoryTablebgcolor" align="center">');
                                       </script>
                                            <tr>
                                                 <td>
                                                      <table cellpadding=7 cellspacing=7 border=0 width="400" bordercolor="#293163"
    class="deadlineHistoryTablebgcolor" align="center">
                                                           <tr>
                                                                <td>
                                                                     <font class="fontBlue">   USER ID       &nbsp:  </font><input
    type="text" name="iv-user">
                                                                </td>
                                                           </tr>
                                                      </table>
                                                 </td>
                                            </tr>
                                       </table>     
                                  </td>
                             </tr>
                             <tr>
                                  <td>
                                       <table cellpadding=0 cellspacing=0 border=1 width="400" class="borderBlue"
    class="deadlineHistoryTablebgcolor" align="center">
                                            <tr>
                                                 <td>
                                                      <table cellpadding=7 cellspacing=7 border=0 width="400" class="borderBlue"
    class="deadlineHistoryTablebgcolor" align="center">
                                                           <tr>
                                                                <td align="center" ><input type="submit" value="Submit" onclick="return
    (onLogin())" ></td>
                                                           </tr>
                                                      </table>
                                                 </td>
                                            </tr>
                                       </table>
                                  </td>
                             </tr>
                        </table>
                   </td>
              </tr>
         </table>
    </html:form>     
    </body>
    </html>
    Thanks

  • Could not parse xml on Weblogic!

    Hello
    My ear file have aldready deployed successfull on Oracle Appllication Server. And now I try deploy on weblogic but I reiceive the error could not parse xml file. I think It may be the problem with security in weblogic.
    # java.lang.NullPointerException
    # at org.apache.commons.digester.Digester.createSAXException(Digester.java:3181)
    # at org.apache.commons.digester.Digester.createSAXException(Digester.java:3207)
    # at org.apache.commons.digester.Digester.endElement(Digester.java:1225)
    # at org.apache.xerces.parsers.SAXParser.endElement(SAXParser.java:1403)
    # at org.apache.xerces.validators.common.XMLValidator.callEndElement(XMLValidator.java:1550)
    # at org.apache.xerces.framework.XMLDocumentScanner.scanElement(XMLDocumentScanner.java:1809)
    # at org.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:1182)
    # at org.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:381)
    # at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:1098)
    # at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:153)
    # at org.apache.commons.digester.Digester.parse(Digester.java:1785)
    # at com.toranto.cmsserver.util.TorantorevisorUtil.createOrganizationOrgEntityIdXml(TorantorevisorUtil.java:3636)
    # at jsp_servlet.__test._jspService(__test.java:119)
    If any one have the same error on weblogic, please help me.
    Thanks in advance.

    Because this ear is ok in oracle apllication server.
    the code here:
    Digester digester = DigesterLoader.createDigester(rulesURL);
    Object rootElement = null;
    InputStream is = null;
    try {
    is = initURL.openStream();
    //3. parse initialization file
    try {
    rootElement = digester.parse(is);
    } catch (SAXException e) {
    String msg = "Digester parse error! Message: " + e.getMessage();
    log.error(msg, e);
    throw e;
    The error cause by rootElement = digester.parse(is);
    So I think in weblogic not accept common-digester.jar to parse xml
    Do you have any idea for this problem.
    Thanks in advance.
    Tang Chow

  • Windows could not parse or process unattend answer file (c:windows\panther\unattend.xml). Error message during setup.

    I'm having an issue, with Windows 8.1 sysprep WIM, when applying the image and don't know what to do.
    I am using the Windows 8.1 WADK/Windows Kits for Windows 8.1. Using the Image Manager for creating my answer file, using deployment/imaging tool for creating and editing my images, and using the same Windows 8.1 DVD media for my catalog as in my WIM. No MDT
    involvement.
    Using WinPE to clean and partition my disk and to apply the image.
    I have done the best research I'm able to do at the moment and for this issue it all comes back to removing/editing the "IEWelcomeMsg" line.
    I have left at false and removed the line as all have mentioned, however I'm still getting the error "windows setup: windows could not parse or process unattend answer file (c:windows\panther\unattend.xml). A component or setting specified in the answer
    file does not exist".
    Is there something I missed? From what I can tell for now, nope.
    Any help to enlighten what might have been over looked would be beneficial.

    Hi JFrederick,
    Please try what Tripredacus suggested first.
    For the error message, we have a similar thread for reference:
    Windows
    Could Not parse or process unattend answer file for pass [specialize]
    The cause might be different, you may refer to the others who offered suggestions in the above thread.
    Regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Could not parse XMBMessage due to invalid content type for SOAP: TEXT/HTML

    Hi all,
       I am working on a SOAP scenario,
    the soap body is as follows
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
         <SOAP-ENV:Body>
              <m:MT_test xmlns:m="http://titan.co.in/test">
                   <name>String</name>
                   <age>String</age>
              </m:MT_test>
         </SOAP-ENV:Body>
    </SOAP-ENV:Envelope>
    when i tried to request it using XML spy, following error i am getting ,
    <?xml version="1.0"?>
    <!-- see the documentation -->
    <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
         <SOAP:Body>
              <SOAP:Fault>
                   <faultcode>SOAP:Server</faultcode>
                   <faultstring>Server Error</faultstring>
                   <detail>
                        <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                             <context>XIAdapter</context>
                             <code>ADAPTER.JAVA_EXCEPTION</code>
                             <text><![CDATA[
    com.sap.aii.af.ra.ms.api.DeliveryException: com.sap.aii.af.ra.ms.api.MessagingException: Could not parse XMBMessage due to invalid content type for SOAP: TEXT/HTML
         at com.sap.aii.af.ra.ms.impl.core.queue.consumer.CallConsumer.onMessage(CallConsumer.java:158)
         at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:916)
         at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
              ]]></text>
                        </s:SystemError>
                   </detail>
              </SOAP:Fault>
         </SOAP:Body>
    </SOAP:Envelope>
    the  request is coming to xi, when i am monitoring the communication channel in RWB,
    i am getting message, "request received, error occured"
    this is anew xi server, is ther any configuration need to do.
    Please help me.
    Regards
    Pradeep P N

    I'm getting the same error. Please tell me how do i resolve this?
    request:
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soap="http://soap2soap">
       <soapenv:Header/>
       <soapenv:Body>
          <soap:mt_soapreqsender>
             <years>?</years>
             <interest>?</interest>
             <loan>?</loan>
             <tax>?</tax>
             <insurance>?</insurance>
          </soap:mt_soapreqsender>
       </soapenv:Body>
    </soapenv:Envelope>
    response:
    <!see the documentation>
    <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
       <SOAP:Body>
          <SOAP:Fault>
             <faultcode>SOAP:Server</faultcode>
             <faultstring>Server Error</faultstring>
             <detail>
                <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                   <context>XIAdapter</context>
                   <code>DeliveryException</code>
                   <text>com.sap.aii.af.ra.ms.api.DeliveryException: com.sap.aii.af.ra.ms.api.MessagingException: Could not parse XMBMessage due to invalid content type for SOAP: APPLICATION/OCTET-STREAM
         at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:144)
         at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:831)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)</text>
                </s:SystemError>
             </detail>
          </SOAP:Fault>
       </SOAP:Body>
    </SOAP:Envelope>

  • Could not parse mapping document form resource

    What is meaning of this error
    Could not parse mapping document from resource user.hbm.xml
    log4j:WARN No appenders could be found for logger (org.hibernate.cfg.Environment).
    log4j:WARN Please initialize the log4j system properly.
    Exception in thread "main" java.lang.NullPointerException
         at UserClient.main(UserClient.java:39)

    I also faced same problem when i wrote my first hibernate mapping file, this error will accur because of bad xml parser design, the parser developer did not even validate and remove blank lines from xml before parsing it, becuse of that if there is first blank line in your xml mapping file then we will get "The processing instruction target matching "[xX][mM][lL]" is not allowed" error.
    Solution: Just check is there any blank line at the begining of your hibernate mapping file if so remove that then it will works fine.

  • Getting "Windows could not parse or process the unattend answer file for pass [specialize]" with IE10 integration? Read this...

    Hey guys,
    I just discovered an issue with using MDT to integrate Internet Explorer 10 into Windows 7 & 2008 R2 image files. Building the images was no problem at all, but when I tried to deploy them it would bomb with this error every time:
    "Windows could not parse or process the unattend answer file for pass [specialize]."
    So a very annoying and cryptic error to say the least. Obviously the issue was with the unattend.xml file that gets auto-generated by MDT, but all the items under "specialize" had worked just fine when I built the image and the IE version
    was the only item that had changed. After comparing the Windows 7 & Server 2008 R2 unattend.xml files to my Windows 8 & Server 2012 unattend.xml files (because they have IE 10 native) I discovered that the following flag was missing
    from the Windows 8 & Server 2012 unattend.xml files:
    <IEWelcomeMsg>false</IEWelcomeMsg>
    So I simply commented it out like so:
    Re-ran my test deployment and viola, 100% successful with zero errors. I was a little embarrassed/annoyed that this took me so long to track down, then I realized others might be struggling with this too so thought I'd share.
    Hope my time spent saves someone else some grief!

    I know the last reply was from a couple weeks ago, but honestly, I haven't been able to find anything else in the last week of searching Google. I'm new to the MDT process but I'm having the same issue with what you posted. I can shift-F10 during the "Applying
    system settings" and open my unattend.xml file and remove the IEWelcomeMsg line and the image deploys perfectly, so I know that's my problem. I can't figure out where that line is coming from. I have edited every unattend.xml file in the Templates folder under
    MDT and also the one in my deployment task sequence, but somewhere during that deployment, that one setting gets added back to the unattend file and nukes the whole image. I'm about to pull my hair out. I'm implementing MDT to save time but I feel like the
    last couple of weeks trying to get it to work have been a waste. I have thought about backing my reference image back to IE9, but having to deploy IE10 post image seems like it's an unnecessary burden. Any help would be appreciated.
    ~Adam

  • Ldmp2v prepare :could not parse manifest

    Source OS: solaris 8  (sunfire v125)
    as the required, patchadd 109318-39
    "ldmp2v collect -d /export/yy -a flash yy" generates "manifest"and "yy.flar",copy the two file to the target machine.
    then on the target machine "ldmp2v prepare -d /root/yy yy"
    faults: could not parse manifest /root/yy/manifest !
    why? or How can I find some help information ?
    thank!

    Hmm, SUNWldmp2v is independent of SUNWldm so installing the rest of the 1.3 software probably won't make a difference.
    Can you mail me the failing manifest (put @sun.com at the end of my username).
    As for upgrading to LDoms 1.3, it should have no impact on your existing configs (but be sure to do backups
    in case - see http://docs.sun.com/app/docs/doc/821-0406/upgradeldomssystem?a=view)
    You could upgrade SUNWldm now without rebooting and apply the firmware and S10 patches the
    next time you have to powercycle the machine.

  • Could not parse manifest

    I am trying to P2V a physical machine running Solaris 10, the collect phase works, the prepare phase on the target gives Could not parse manifest error, has anybody got a solution to this?

    Hmm, SUNWldmp2v is independent of SUNWldm so installing the rest of the 1.3 software probably won't make a difference.
    Can you mail me the failing manifest (put @sun.com at the end of my username).
    As for upgrading to LDoms 1.3, it should have no impact on your existing configs (but be sure to do backups
    in case - see http://docs.sun.com/app/docs/doc/821-0406/upgradeldomssystem?a=view)
    You could upgrade SUNWldm now without rebooting and apply the firmware and S10 patches the
    next time you have to powercycle the machine.

  • Could not parse mapping document from resource

    HI All,
    I'm using hibernate3.2.2 I wrote the following code to contact the database but the system tells the error on it. My code is
    Dealer.java:
    package com.mapping;
    public class Dealer {
         private int id;
         private String name;
         private int did;
         public int getDid() {
              return did;
         public void setDid(int did) {
              this.did = did;
         public int getId() {
              return id;
         public void setId(int id) {
              this.id = id;
         public String getName() {
              return name;
         public void setName(String name) {
              this.name = name;
    Product.java
    ------------------package com.mapping;
    public class Product {
         private int id;
         private int did;
         private String name;
         private double price;
         public int getDid() {
              return did;
         public void setDid(int did) {
              this.did = did;
         public int getId() {
              return id;
         public void setId(int id) {
              this.id = id;
         public String getName() {
              return name;
         public void setName(String name) {
              this.name = name;
         public double getPrice() {
              return price;
         public void setPrice(double price) {
              this.price = price;
    JoinExample.java
    package com.mapping;
    import java.util.Iterator;
    import org.hibernate.Query;
    import org.hibernate.Session;
    import org.hibernate.SessionFactory;
    import org.hibernate.cfg.Configuration;
    import com.HibernateSessionFactory;
    public class JoinExample {
         public static void main(String args[]){
              Session session=null;
              try{
                   session = HibernateSessionFactory.getInstance().getCurrentSession();
                   session.beginTransaction();
                   String sql_query = "from Product p inner join p.dealer as d";
                        Query query = session.createQuery(sql_query);
                        Iterator ite = query.list().iterator();
                        System.out.println("Dealer Name\t"+"Product Name\t"+"Price");
                        while ( ite.hasNext() ) {
                        Object[] pair = (Object[]) ite.next();
                        Product pro = (Product) pair[0];
                        Dealer dea = (Dealer) pair[1];
                        System.out.print(pro.getName());
                        System.out.print("\t"+dea.getName());
                        System.out.print("\t\t"+pro.getPrice());
                        System.out.println();
                        session.close();
              }catch(Exception e){
                   e.printStackTrace();
    Dealer.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE hibernate-mapping PUBLIC "-//Hibernate/Hibernate Mapping DTD//EN"
    "http://hibernate.sourceforge.net/
    hibernate-mapping-3.0.dtd">
    <hibernate-mapping>
    <class name="com.mapping.Dealer" table="dealer">
    <id name="id" type="java.lang.Integer" column="id">
    <generator class="increment"/>
    </id>
    <property name="name" type="java.lang.String" column="name"/>
    <property name="did" type="java.lang.Integer" column="did"/>
    <bag name="product" inverse="true" cascade="all,delete-orphan">
              <key column="did"/>
    <one-to-many class="com.mapping.Product"/>
    </bag>
    </class>
    </hibernate-mapping>
    Product.xml
    <?xml version='1.0' encoding='utf-8'?>
    <!DOCTYPE hibernate-mapping
    PUBLIC "-//Hibernate/Hibernate Mapping DTD//EN"
    "http://hibernate.sourceforge.net/
    hibernate-mapping-3.0.dtd">
    <hibernate-mapping>
    <class name="com.mapping.Product" table="product">
    <id name="id" type="java.lang.Integer" column="id">
    <generator class="increment"/>
    </id>
    <property name="name" type="java.lang.String" column="name"/>
    <property name="did" type="java.lang.Integer" column="did"/>
    <property name="price" type="java.lang.Double" column="price"/>
    <many-to-one name="dealer" class="com.mapping.Dealer" column="did" insert="false" update="false"/>
    </class>
    </hibernate-mapping>
    hibernate.cfg.xml
    <?xml version='1.0' encoding='utf-8'?>
    <!DOCTYPE hibernate-configuration PUBLIC
    "-//Hibernate/Hibernate Configuration DTD//EN"
    "http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd">
    <hibernate-configuration>
    <session-factory>
    <property name="hibernate.connection.driver_class">com.mysql.jdbc.Driver</property>
    <property name="hibernate.connection.url">jdbc:mysql://localhost/hibernate</property>
    <property name="hibernate.connection.username">root</property>
    <property name="hibernate.connection.password"></property>
    <property name="hibernate.connection.pool_size">10</property>
    <property name="show_sql">true</property>
    <property name="dialect">org.hibernate.dialect.MySQLDialect</property>
    <property name="hibernate.hbm2ddl.auto">update</property>
    <!-- Mapping files -->
    <mapping resource="com/mapping/Dealer.hbm.xml"/>
    <mapping resource="com/mapping/Product.hbm.xml"/>
    </session-factory>
    </hibernate-configuration>
    it throws the following example:
    log4j:WARN No appenders could be found for logger (org.hibernate.cfg.Environment).
    log4j:WARN Please initialize the log4j system properly.
    %%%% Error Creating HibernateSessionFactory %%%%
    org.hibernate.InvalidMappingException: Could not parse mapping document from resource com/mapping/Dealer.hbm.xml
         at org.hibernate.cfg.Configuration.addResource(Configuration.java:575)
         at org.hibernate.cfg.Configuration.parseMappingElement(Configuration.java:1593)
         at org.hibernate.cfg.Configuration.parseSessionFactory(Configuration.java:1561)
         at org.hibernate.cfg.Configuration.doConfigure(Configuration.java:1540)
         at org.hibernate.cfg.Configuration.doConfigure(Configuration.java:1514)
         at org.hibernate.cfg.Configuration.configure(Configuration.java:1434)
         at com.HibernateSessionFactory.initSessionFactory(HibernateSessionFactory.java:39)
         at com.HibernateSessionFactory.getInstance(HibernateSessionFactory.java:23)
         at com.mapping.JoinExample.main(JoinExample.java:19)
    Caused by: org.hibernate.InvalidMappingException: Could not parse mapping document from input stream
         at org.hibernate.cfg.Configuration.addInputStream(Configuration.java:514)
         at org.hibernate.cfg.Configuration.addResource(Configuration.java:572)
         ... 8 more
    Caused by: org.dom4j.DocumentException: hibernate.sourceforge.net Nested exception: hibernate.sourceforge.net
         at org.dom4j.io.SAXReader.read(SAXReader.java:484)
         at org.hibernate.cfg.Configuration.addInputStream(Configuration.java:505)
         ... 9 more
    org.hibernate.HibernateException: Could not initialize the Hibernate configuration
         at com.HibernateSessionFactory.initSessionFactory(HibernateSessionFactory.java:56)
         at com.HibernateSessionFactory.getInstance(HibernateSessionFactory.java:23)
         at com.mapping.JoinExample.main(JoinExample.java:19)
    regards,
    Maheshwaran Devaraj

    I also faced same problem when i wrote my first hibernate mapping file, this error will accur because of bad xml parser design, the parser developer did not even validate and remove blank lines from xml before parsing it, becuse of that if there is first blank line in your xml mapping file then we will get "The processing instruction target matching "[xX][mM][lL]" is not allowed" error.
    Solution: Just check is there any blank line at the begining of your hibernate mapping file if so remove that then it will works fine.

  • Could not parse XMBMessage due to Can't parse the document

    *Dear all,*
    *i have a SOAP to RFC Scenario. XML Validation by Adapter is turned on in SenderAgreement.*
    *XSD Files are placed in the correct directory. Incoming requests are validated. However,*
    *it seems that responses produce an error in the soap adapter.*
    *This is the error message i am getting:*
    +SOAP:Fault>+
             +<faultcode>SOAP:Server</faultcode>+
             +<faultstring>Server Error</faultstring>+
             +<detail>+
                +<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">+
                   +<context>XIAdapter</context>+
                   +<code>ADAPTER.JAVA_EXCEPTION</code>+
                   +<text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not parse XMBMessage due to Can't parse the document+
    +     at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1173)+
    +     at sun.reflect.GeneratedMethodAccessor678.invoke(Unknown Source)+
    +     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
    +     at java.lang.reflect.Method.invoke(Method.java:592)....+
    *In SXMB_MONI my response includes the following passages*
    +- <!--  ************************************+
      -->
      +<Trace level="3" type="T">Pipeline Service = PLSRV_XML_VALIDATION_RS_OUT</Trace>+
      +<Trace level="3" type="T">Skip Inbound Validation =</Trace>+
      +<Trace level="3" type="T">Skip Outbound Validation =</Trace>+
      +<Trace level="3" type="T">Area = XML_VALIDATION_OUT</Trace>+
      +<Trace level="1" type="T">Reading sender agreement</Trace>+
      +<Trace level="3" type="T">Validation Mode = Validation by Adapter</Trace>+
      +<Trace level="1" type="T">Outbound validation of response takes place</Trace>+
      +<Trace level="3" type="T">Interface Name = SI_xxx_xxx_xxx_Sync_Outbound</Trace>+
      +<Trace level="3" type="T">Interface Namespace = http://xxx.de/xxx</Trace>+
      +<Trace level="3" type="T">Software Component Version = D390B9E10A6B11DF8C15C7540A484C06</Trace>+
      +<Trace level="2" type="T">Java Validation Service Call</Trace>+
      +<Trace level="1" type="T">System error occurred during XML validation</Trace>+
      +<Trace level="1" type="E">CL_XMS_PLSRV_VALIDATION~ENTER_PLSRV</Trace>+
      +</Trace>+
      +<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />+
    +- <!--  ************************************+
      -->
      +<Trace level="3" type="T">Persisting message Status = 023</Trace>+
      +<Trace level="3" type="T">Message version 009</Trace>+
      +<Trace level="3" type="T">Pipeline CENTRAL</Trace>+
      +</SAP:Trace>+
    *I see the following error message:*
      +<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>+
    +- <!--  Aufruf eines Adapters+
      -->
    - <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="XML_VALIDATION_OUT">CX_XMS_SYSERR_VALIDATION</SAP:Code>
      <SAP:P1>Schema xxx.response.xsd not found in J:\usr\sap\xxx\SYS\global\xi\runtime_server\validation\schema\00000000000000000000000000000000\ u00D3u00B9u00E1 k u00DFŒ u00C7T HL \SI_xxx_xxx_xxx_Sync_Outbound\urnsap-comdocumentsaprfc~functions\xxx.response.xsd (J:\usr\sap\xxx\SYS\global\xi\runtime_server\validation\schema)</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>not used at the moment.</SAP:AdditionalText>
      <SAP:Stack>System error occurred during XML validation</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    There seems to be an error in the adapter trying to validate the response. Does anyone has a clue as to why ?

    Since i cannot get i running, i helped myself using a java mapping, that i packaged into a jar
    along with the xsd files. See code below:
    import com.sap.aii.*;
    import java.io.File;
    import java.io.FileInputStream;
    import java.io.FileNotFoundException;
    import java.io.FileOutputStream;
    import java.io.IOException;
    import java.io.InputStream;
    import java.io.BufferedReader;
    import java.io.OutputStream;
    import java.io.OutputStreamWriter;
    import java.io.UnsupportedEncodingException;
    import java.io.InputStreamReader;
    import java.io.Reader;
    import javax.xml.transform.sax.SAXResult;
    import javax.xml.transform.sax.SAXSource;
    import javax.xml.transform.stream.StreamSource;
    import javax.xml.validation.Schema;
    import javax.xml.validation.SchemaFactory;
    import javax.xml.validation.Validator;
    import org.xml.sax.InputSource;
    import org.xml.sax.SAXException;
    @SuppressWarnings("unused")
    public class CustomValidator extends AbstractTransformation {
         public void transform(TransformationInput arg0, TransformationOutput arg1)
                   throws StreamTransformationException {
              Validator validator;
              InputStreamReader insr;
              String inputPayloadString;
              try {
                   // Trace
                   getTrace().addInfo("com.xxx.pi.mapping.validation.CustomValidator called");
                   InputStream inputPayloadStream = arg0.getInputPayload()
                             .getInputStream();
                   insr = new InputStreamReader(inputPayloadStream);
                   InputHeader inpHeader = arg0.getInputHeader();          
                   String intfName = inpHeader.getInterface();
                   getTrace().addInfo("Interface Name is :" + intfName);
                   String xsdName = "";
                   if (intfName
                             .equalsIgnoreCase("SI_xxx_Sync_Outbound")) {
                        xsdName = "Z_xxx.xsd";
                   if (intfName.equalsIgnoreCase("SI_xxx")) {
                        xsdName = "Z_xxx.xsd";
                   if (intfName
                             .equalsIgnoreCase("SI_xxx_Sync_Outbound")) {
                        xsdName = "Z_xxx.xsd";
                   if (intfName
                             .equalsIgnoreCase("SI_xxxx_Sync_Outbound")) {
                        xsdName = "Z_xxx.xsd";
                   getTrace().addInfo("Using schema: " + xsdName);
                   if (xsdName.equals(""))
                        throw new StreamTransformationException("Schema für "
                                  + intfName + " nicht gefunden.");
                   BufferedReader reader = new BufferedReader(new InputStreamReader(
                             getClass().getResourceAsStream(
                                       "/com/xxx/pi/mapping/xsd/" + xsdName)));
                   // prepare document validator:
                   String schemaLang = "http://www.w3.org/2001/XMLSchema";
                   SchemaFactory jaxp = SchemaFactory.newInstance(schemaLang);
                   Schema schema = jaxp.newSchema(new StreamSource(reader));
                   validator = schema.newValidator();
              } catch (SAXException saxe) {
                   throw new StreamTransformationException(saxe.getMessage());
              // validate
              try {
                   SAXSource source = new SAXSource(new InputSource(insr));
                   validator.validate(source);
              } catch (Exception e) {
                   getTrace().addInfo(e.getMessage());
                   String trace = e.getMessage();
                   throw new StreamTransformationException(trace, e.getCause());
              // Write the response
              try {
                   inputPayloadString = convertStreamToString(arg0.getInputPayload()
                             .getInputStream());
                   arg1.getOutputPayload().getOutputStream()
                             .write(inputPayloadString.getBytes("UTF-8"));
                   getTrace().addInfo("Schema Validierung erfolgreich !");
              } catch (Exception e) {
                   throw new StreamTransformationException(e.getMessage());
         // helper to convert to String
         private static String convertStreamToString(InputStream in) {
              StringBuffer sb = new StringBuffer();
              try {
                   InputStreamReader isr = new InputStreamReader(in);
                   BufferedReader reader = new BufferedReader(isr);
                   String line;
                   while ((line = reader.readLine()) != null) {
                        sb.append(line);
              catch (Exception exception) {
              return sb.toString();

  • Windows Could Not parse or process unattend answer file for pass [specialize] after WDT Litetouch 'sysprep and capture'

    I setup an ACER VM6620G (Win7x86) how I wanted, including disabling the administrator account and creating an administrator user "PVA"
    Navigated to \\wds\DeploymentShare$\Scripts and ran the litetouch script. Chose my "Sysprep and Capture" task. 
    Everything went off without a hitch until I restarted the technician pc. 
    I got the dreaded
    "Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist"
    I tried to deploy the captured image to the same computer and got the same error
    I've scoured the internet for solutions (Shift+10 opens command prompt. Good to know!) with no luck.
    I've saved the unattend.xml and looked for errors- going as far as to install an x86 Win7 virtual machine to validate the unattend.xml file in WISM
    Other information that might be useful:
       I never used WISM to create an unattend.xml nor did I attach one to the image. 
       I didn't try to copy user profiles/settings/migrate etc
       I imported the captured image to WDT. Created a standard task and added 2 nodes 
         -Inject Drivers
         -Install Application
    As a side, I've got another image that I've already injected the drivers/installed the application as a test. Everything went smoothly.
    +-----------------+
     | Unattend.xml: 
    +-----------------+
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
    <component name="Microsoft-Windows-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <ImageInstall>
    <OSImage>
    <WillShowUI>OnError</WillShowUI>
    <InstallTo>
    <DiskID>0</DiskID>
    <PartitionID>2</PartitionID>
    </InstallTo>
    <InstallFrom>
    <Path>\\10.0.0.1\deploymentshare$\Operating Systems\ACER Win7 x86 Capture\ACER Win7 x86 Capture.wim</Path>
    <MetaData>
    <Key>/IMAGE/INDEX</Key>
    <Value>1</Value>
    </MetaData>
    </InstallFrom>
    </OSImage>
    </ImageInstall>
    <Display>
    <ColorDepth>16</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <ComplianceCheck>
    <DisplayReport>OnError</DisplayReport>
    </ComplianceCheck>
    <UserData>
    <AcceptEula>true</AcceptEula>
    </UserData>
    </component>
    <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <SetupUILanguage>
    <UILanguage>en-US</UILanguage>
    </SetupUILanguage>
    <InputLocale>0409:00000409</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="generalize">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    </component>
    </settings>
    <settings pass="specialize">
    <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <Identification>
    <JoinWorkgroup>WORKGROUP</JoinWorkgroup>
    </Identification>
    </component>
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <ComputerName>PVA-PC</ComputerName>
    <RegisteredOrganization>PVA</RegisteredOrganization>
    <RegisteredOwner>PVA</RegisteredOwner>
    <TimeZone>"Eastern Standard Time"</TimeZone>
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    </component>
    <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <Home_Page>about:blank</Home_Page>
    <IEWelcomeMsg>false</IEWelcomeMsg>
    </component>
    <component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <RunSynchronous>
    <RunSynchronousCommand wcm:action="add">
    <Description>EnableAdmin</Description>
    <Order>1</Order>
    <Path>cmd /c net user Administrator /active:yes</Path>
    </RunSynchronousCommand>
    <RunSynchronousCommand wcm:action="add">
    <Description>UnfilterAdministratorToken</Description>
    <Order>2</Order>
    <Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
    </RunSynchronousCommand>
    <RunSynchronousCommand wcm:action="add">
    <Description>disable user account page</Description>
    <Order>3</Order>
    <Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
    </RunSynchronousCommand>
    </RunSynchronous>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>en-US</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    <component name="Microsoft-Windows-TapiSetup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <TapiConfigured>0</TapiConfigured>
    <TapiUnattendLocation>
    <AreaCode>""</AreaCode>
    <CountryOrRegion>1</CountryOrRegion>
    <LongDistanceAccess>9</LongDistanceAccess>
    <OutsideAccess>9</OutsideAccess>
    <PulseOrToneDialing>1</PulseOrToneDialing>
    <DisableCallWaiting>""</DisableCallWaiting>
    <InternationalCarrierCode>""</InternationalCarrierCode>
    <LongDistanceCarrierCode>""</LongDistanceCarrierCode>
    <Name>Default</Name>
    </TapiUnattendLocation>
    </component>
    <component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DisableSR>1</DisableSR>
    </component>
    </settings>
    <settings pass="oobeSystem">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <UserAccounts>
    <AdministratorPassword>
    <Value></Value>
    <PlainText>true</PlainText>
    </AdministratorPassword>
    </UserAccounts>
    <AutoLogon>
    <Enabled>true</Enabled>
    <Username>Administrator</Username>
    <Domain>.</Domain>
    <Password>
    <Value></Value>
    <PlainText>true</PlainText>
    </Password>
    <LogonCount>999</LogonCount>
    </AutoLogon>
    <Display>
    <ColorDepth>32</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <FirstLogonCommands>
    <SynchronousCommand wcm:action="add">
    <CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
    <Description>Lite Touch new OS</Description>
    <Order>1</Order>
    </SynchronousCommand>
    </FirstLogonCommands>
    <OOBE>
    <HideEULAPage>true</HideEULAPage>
    <NetworkLocation>Work</NetworkLocation>
    <ProtectYourPC>1</ProtectYourPC>
    </OOBE>
    <RegisteredOrganization>PVA</RegisteredOrganization>
    <RegisteredOwner>PVA</RegisteredOwner>
    <TimeZone>"Eastern Standard Time"</TimeZone>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>en-US</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="offlineServicing">
    <component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DriverPaths>
    <PathAndCredentials wcm:keyValue="1" wcm:action="add">
    <Path>\Drivers</Path>
    </PathAndCredentials>
    </DriverPaths>
    </component>
    </settings>
    </unattend>

    https://skydrive.live.com/redir?resid=55C3109D61329D02!108&authkey=!AG793wDwQuFZa1s
    Here's the end of the log file:
    2013-03-27 17:39:05, Info CMI CBS_Core_Finalize:Calling cbs core finalize complete
    2013-03-27 17:39:05, Info CMI Callback_CMI_ConfigInstall: CBS startup processing re-run complete.
    2013-03-27 17:39:05, Info [0x030023] CMI Callback_CMI_ConfigInstall: Exit.
    2013-03-27 17:39:05, Info [setup.exe] UnattendSearchExplicitPath: Found unattend file at [C:\windows\Panther\unattend.xml]; examining for applicability.
    2013-03-27 17:39:05, Info [setup.exe] UnattendSearchExplicitPath: Found usable unattend file for pass [specialize] at [C:\windows\Panther\unattend.xml].
    2013-03-27 17:39:06, Info IBS Callback_Unattend_InitEngine:Using unattend file found at [C:\windows\Panther\unattend.xml].
    2013-03-27 17:39:06, Info [setup.exe] ValidateSMIPass: serialized settings stream; status 0x00000000
    2013-03-27 17:39:06, Info [setup.exe] ValidateSMIPass: construct settings context; status 0x00000000
    2013-03-27 17:39:06, Error [setup.exe] SMI data results dump: Source = Name: Microsoft-Windows-IE-InternetExplorer, Language: neutral, ProcessorArchitecture: x86, PublicKeyToken: 31bf3856ad364e35, VersionScope: nonSxS, /settings/IEWelcomeMsg
    2013-03-27 17:39:06, Error [setup.exe] SMI data results dump: Description = Setting is not defined in this component.
    2013-03-27 17:39:06, Info [setup.exe] ValidateSMIPass: load SMI settings; status 0x00000001
    2013-03-27 17:39:06, Error [0x060432] IBS The provided unattend file is not valid; hrResult = 0x80220001
    2013-03-27 17:39:06, Error [0x060565] IBS Callback_Unattend_InitEngine:The provided unattend file [C:\windows\Panther\unattend.xml] is not a valid unattended Setup answer file; hr = 0x1, hrSearched = 0x1, hrDeserialized = 0x0, hrImplicitCtx = 0x0, hrValidated = 0x1, hrResult = 0x80220001
    2013-03-27 17:39:06, Info IBS UnattendErrorFromResults: Hit an unattend error; dumping any info we have about the failure...
    2013-03-27 17:39:06, Info IBS UnattendDumpSetting: ------Unattend setting error / warning------
    2013-03-27 17:39:06, Info IBS UnattendDumpSetting: Error code = 0x80220001
    2013-03-27 17:39:06, Info IBS UnattendDumpSetting: Pass = specialize
    2013-03-27 17:39:06, Info IBS UnattendDumpSetting: --------------------------------------------
    2013-03-27 17:39:06, Info IBS UnattendErrorFromResults: Error text = Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist.
    2013-03-27 17:39:06, Error [0x0600c2] IBS Callback_Unattend_InitEngine:An error occurred while finding/loading the unattend file; hr = 0x1, hrResult = 0x80220001[gle=0x00000490]
    2013-03-27 17:39:06, Info IBSLIB PublishCriticalError: Publishing blocked message [Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist.]
    2013-03-27 17:39:06, Info This installation is blocked from completing due to compliance failures or invalid input; this is not an internal error.
    Also, here's my customsettings.ini as I think it changes the unattend?
    [Settings]
    Priority=Default
    Properties=MyCustomProperty
    [Default]
    SkipDomainMembership=YES
    DomainAdmin=Administrator
    DomainAdminDomain=go.local
    DomainAdminPassword=************
    SkipTimeZone=YES
    TimeZone="035"
    TimeZoneName="Eastern Standard Time"
    SkipLocaleSelection=YES
    KeyboardLocale=en-US
    UserLocale=en-US
    UILanguage=en-US
    Bootstrap.ini:
    [Settings]
    Priority=Default
    [Default]
    DeployRoot=\\10.0.0.1\DeploymentShare$
    UserID=Administrator
    UserDomain=go.local
    UserPassword=***********
    KeyboardLocale=en-US
    SkipAdminPassword=YES
    SkipProductKey=YES
    SkipBitLocker=YES

  • When installing Server 2008 Datacenter from disc, I get the error message "Windows could not parse or process the unattent answer file for pass [specialize].

    This is a clean install from s disc onto a 3TB GPT drive. This is for testing. I'm not concerned with finding a more practical solution for this installation.
    There is no image or answer file involved. But at the "Completing Installation" phase, I receive this error message about an answer file.
    Has anyone else expecrienced this problem? The only results I find here are regarding actual imaging with answer files.
    EDIT: [Redacted]
    EDIT 2: Since this now happens with every single installation of Server 2008 on this system, I feel the need to keep this open and elaborate on my situation.
    I originally installed Server 2008 on the 2TB partition of this 3TB drive. The partition type was MBR. I reinstalled it (there was a false alarm for malicious software) since it was a fresh install without updates or anything else installed. And for the
    second time, it installed fine.
    I decided to make the most of my 3TB drive and try GPT partitioning. So I went into the command prompt > diskpart > ran "clean" on the disk, then "convert GPT"
    That is when I tried another install of Server 2008 and received this error message about an answer file.
    I decided to convert it back to MBR and get on with what I wanted to test in the first place. So I went into Diskpart again, ran "clean", rand "convert MBR" and started the install. But this resulted in the same error message about an
    answer file.
    I went back to Diskpart, "clean"ed the disk, ran "convert dynamic" to make sure it was dynamic, then tried the install again, with the same result.
    Now, I've tried installing on the disk as GPT, MBR basic and MBR dynamic. I've tried a different installation disc, as well. I got the same result. At this point, I'm going to switch hard drives, but I'm still open to input. Thanks for reading!

    Hi,
    As you swapped the hard disk, whether the same issue occurs again if you redo the same steps?
    I asked "OEM or retail" because of this known issue:
    "Windows could not parse or process the unattend answer file for pass [specialize]" error message when you perform an in-place upgrade in Windows 7 or in Windows Server 2008 R2
    http://support.microsoft.com/kb/2425962
    An answer file may already contain in the disc which causes the issue.
    If issue still exists you can click Shift + F10 during the installation process to see the log. Check if the installation error for detailed information.
    If you have any feedback on our support, please send to [email protected]

Maybe you are looking for

  • Back to my mac question

    Ok so i've been reading up on the boards about this for a while, but i only had a chance to really start messing with it last night. However I am still bit confused about few things. So i guess I need help from somebody who got this thing to work and

  • Adding the collapse/expand function to a subgroup

    Good morning, I'm quickly getting a handle on building some very nice reports with SSRS. When I do the first grouping of data, the expand/collapse function is added to the top level. Works great. When I add a subgroup, the expand/collapse (+) functio

  • STR's with an S Loc

    Hi All, We are using one of our WH's as a storage location in SAP & would like to deal with it in terms of STR's for the supply & receipt of products. While I know that we can create STR's using MRP Area concept, in APO (SCM 7.0) the SAP documentatio

  • Mac Pro self-restarting

    About the computer: early 2008 Mac Pro dual 2.8, 4GB stock ram, OS 10.6.7. Additional hardware includes: aftermarket ATI HD3870 (to replace failed stock card), Black Magic Decklink I/O; 1TB OSX HDD, 320GB Windows 7 HDD and 2x 1.5TB storage drives in

  • Search Queries

    Hi, I have a question on search queries in C4C on for example on "Accounts", "Sales Leads" and "Opportunities".  As standard for example for "Account" in the search criteria we are given the following search queries: - All Accounts - My Accounts - My