XML data set problems with Accordion widget

Hi,
I have a dataset, which returns the data as shown below:
<resultset>
<result>
<title>Title one<b>with parts of the title in
bold</b></title>
<otherAttributes/>
</result>
</resultset>
As you can see, some of the nodes may have markups, such as
<b> etc. I create the XML dataset as:
var myDataset = new Spry.Data.XMLDataSet("/path/to/my/URL",
"resultset/result");
And in AccordionPanelTab, I use the title property as shown
below.
<div class="AccordionPanelTab">{title}</div>
But this doesn't work. The Tab displays no titles. If I
remove the <b/> in the <title> it works fine as
expected. My problem is, some titles may have additional mark ups
and some may not. How can I handle this problem?
Any help is greatly appreciated.
Cheers,
Rag.

Forgot to mention that the data comes from third party
service providers, so I have no control over it. For ex: I cannot
have title in a CDATA section.

Similar Messages

Open data set problem with binary mode

Hi everyone,
I am trying to read into a buffer the content of a binary file (like Excel) and to write that content file using open data set into a folder destination.
The file destination has a size diferent than from the original one and cannot be open.
Here is the code.
DATA: lv_file_name(100),
         lt_content LIKE sdokcntbin OCCURS 0 WITH HEADER LINE.
MOVE '\computerTestA1.xls' TO lv_file_name.
OPEN DATASET lv_file_name FOR INPUT IN BINARY MODE.
IF sy-subrc NE 0.
    EXIT.
ENDIF.
DO.
    READ DATASET lv_file_name INTO lt_content-line.
    IF sy-subrc NE 0.
      EXIT.
    ENDIF.
    APPEND lt_content.
ENDDO.
CLOSE DATASET lv_file_name.
* DELETE DATASET lv_file_name.
CLEAR: lv_file_name.
MOVE '\computerTestB2.xls' TO lv_file_name.
OPEN DATASET lv_file_name FOR OUTPUT IN BINARY MODE.
IF sy-subrc NE 0.
    EXIT.
ENDIF.
LOOP AT lt_content.
    TRANSFER lt_content-line TO lv_file_name.
ENDLOOP.
CLOSE DATASET lv_file_name.
THanks in advance.
Regards.
Message was edited by:
        David Fryda

Hi,
I solve the problem.
In fact, when I try to write the last line of lt_content, it does write all the line even if this line is not full of data.
Solution :
DATA: lv_file_name(100),
         lt_content LIKE sdokcntbin OCCURS 0 WITH HEADER LINE,
         alen TYPE i,
         pos TYPE i.
MOVE '\mr0221TestA1.xls' TO lv_file_name.
OPEN DATASET lv_file_name FOR INPUT IN BINARY MODE.
IF sy-subrc NE 0.
    EXIT.
ENDIF.
SET DATASET lv_file_name POSITION END OF FILE.
GET DATASET lv_file_name POSITION pos.
SET DATASET lv_file_name POSITION 0.
DO.
    CLEAR lt_content.
    READ DATASET lv_file_name INTO lt_content-line ACTUAL LENGTH alen .
    IF sy-subrc NE 0.
      APPEND lt_content.
      EXIT.
    ENDIF.
    APPEND lt_content.
ENDDO.
CLOSE DATASET lv_file_name.
* DELETE DATASET lv_file_name.
CLEAR: lv_file_name.
MOVE '\mr0221TestB2.xls' TO lv_file_name.
OPEN DATASET lv_file_name FOR OUTPUT IN BINARY MODE.
IF sy-subrc NE 0.
    EXIT.
ENDIF.
LOOP AT lt_content.
    AT LAST.
      TRANSFER lt_content-line TO lv_file_name LENGTH alen.
      EXIT.
    ENDAT.
    TRANSFER lt_content-line TO lv_file_name.
ENDLOOP.
CLOSE DATASET lv_file_name.
Thanks.

Problem with accordion widget flashing open and shut when page loads

why is it that my accordion widget flashes open and shut when the page is loading (see http://vincentballmusewebsite2013test.businesscatalyst.com/digital-illustration.html#.UVDr Ehx7JyII) have tried everything to solve this, and Adobes customer service is terrible they don't get back to you when they say they will.
Please help me someone,
Thanks

Thank you Zak for your help, I spent 5 hours going round in circles trying to fix that problem and that's all I needed to hear, a bit of honesty and integrity.and yes, Adobes terrible customer service has still not got back to after promising 2 level technical support to contact me last Monday, I wish there'd keep their promise
Pamela, did you try my test website or my own website and if so my own has now no accordion widget on it and my test website may need you to try loading a few times to see if it really works or not, sometimes it does actually work even on a pc but most times not.
thanks for you help too.

Problem with Accordion Widget INSIDE Sliding Panel Widget

Hello,
perhaps I should not do this, but I nested an Accordion
Widget inside a Sliding Panels Widget:
- There are eight Panels.
- Each one contains a complete Accordion.
The sliding works fine, and so does the Accordion animation,
but the text inside the Accordion Panel Tabs won't move along, when
a tab is activated. I need to hover the mouse over the accordion to
make the panel texts appear again.
Of course, when I un-nest the widgets and move the Accordion
widget out of the Sliding Panel widget, everything is fine.
My question is:
- am I demanding "too much" by nesting the widgets?
- or should this basically work, and the problem arises from
rivalling scripts?
Here is a link:
Nested
widgets Test
The horizontal top menu will activate the sliding panels, but
as of now only the leftmost menu item contains an Accordion (I know
the CSS does not look nice yet).
Is there anything I can optimise to get this to work?
Thank you so much,
Greetings, Jensen
Edit: The problem does NOT occur in Firefox, but in
Safari.

Hi John,
That is the expected behavior if the "Overlap items below" is unchecked. Please refer to the following link http://screencasteu.worldsecuresystems.com/aish/2013-08-21_1947.png. If you don't want the page to wiggle up and down, please check the box shown in the screenshot.
Regards,
Aish

XML Data Set with Spry Slides - Please Help

Hi, I'm trying to combine XML Data Set with sliding tabs.
I've created two keys responsible for sliding the tabs:
<a id="previous" href="#"
onclick="sp1.showPreviousPanel();">Previous</a>
<a id="next" href="#"
onclick="sp1.showNextPanel();">Next</a>
Then XML Data Set is used to populate the tabs, but only a
single tab remains visible, and a "Next/Previous" buttons are used
to move to the next tab. And this is where the problem arises.
The problem is that, every time I refreash the gallery or
load it for the first time, I have to press TWICE the "Next" button
to move to the next image. After that, its all fine, and slides
well. It's only the FIRST time when loaded.
Please help.
Here's the full code:
<div id="images_gal" >
///////////////////////////////////////// The menu - the
culprit///////////////////////////////////////////
<div id="menu_next">
<a id="previous" href="#"
onclick="sp1.showPreviousPanel();">Previous</a>
<a id="next" href="#"
onclick="sp1.showNextPanel();">Next</a>
</div>
//////////////////////////////////////// The Sliding Panels
Gallery ////////////////////////////////////////////////////
<div id="example2" class="SlidingPanels" tabindex="0" >
<div class="SlidingPanelsContentGroup"
spry:region="dsSpecials">
<div spry:repeat="dsSpecials" id="{first}"
class="SlidingPanelsContent{second}"><div class="top_gal"
></div><div class="main_gal"><img
src="images/Galery/{third}" alt="Digital_Signage" width="600"
height="304" />
<p class="screen_gal"><a href="#"
onclick="MM_openBrWindow('film1.html','Coloris','width=340,height=260,
top=250, left=250')">CLICK TO VIEW</a></p>
</div><div
class="bottom_gal"></div></div>
</div>
</div>

Anyone has any idea why I need a DOUBLE Click to start moving
the sliding panels?
I've just completed two tutorials by Don Booth.
1/Building a Spry Sliding Panels widget
2/Building a photo album with the Spry framework
But what I try to COMBINE them - display the photos in
sliding panels, I also need to DOUBLE click the "next" buton before
it starts scrolling.
Why is that Double Click needed? Help Please.
Here's my code for the combined version:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
a {
position:relative;
left:23px;
top:127px;
z-index:10000;
color: #FF0000;
</style>
<script type="text/javascript"
src="photo_album_samples/includes/xpath.js"></script>
<script type="text/javascript"
src="photo_album_samples/includes/sprydata.js"></script>
<script type="text/javascript"
src="Spry/SprySlidingPanels.js"></script>
<link type="text/css" rel="stylesheet"
href="Spry/SprySlidingPanels.css">
</head>
<body>
<div >
<a href="#" onclick="sp1.showPreviousPanel();">Previous
Panel</a>
<a href="#" onclick="sp1.showNextPanel();" >Next
Panel</a>
</div>
<div id="panelwidget" class="SlidingPanels" >
<div class="SlidingPanelsContentGroup"
spry:region="dsGallery" >
<div spry:repeat="dsGallery" class="SlidingPanelsContent"
id="p1"><img
src="photo_album_samples/thumbnails/{@thumbpath}"/></div>
</div>
</div>
<script type="text/javascript">
var dsGallery = new
Spry.Data.XMLDataSet("photo_album_samples/photos.xml",
"gallery/photos/photo");
</script>
<script type="text/javascript">
var sp1 = new Spry.Widget.SlidingPanels("panelwidget");
</script>
</body>
</html>

Tooltip with xml data set

I have posted this over on the Spry forum but wonder if someone else has had a similar issue and found a solution as I am trying to find the answer to this quickly if possible; I want to use a tooltip with an xml data set.
I have an xml data set of events and within it there is a tooltip element. How can I get another element to act as a trigger so my tooltip appears when I mouseover the element?
My data set is displaying correctly. I'm trying to get the event title element to act as the trigger and the code that I have so far:
<div spry:region="eventsDS">
        <table width="533">
          <tr>
            <th width="108" spry:sort="date">Date</th>
            <th width="105" spry:sort="title">Title</th>
            <th width="98" spry:sort="location">Location</th>
            <th width="202" spry:sort="price">Price</th>
          </tr>
          <tr spry:repeat="eventsDS">
            <td>{date}</td>
            <td><a href="#tooltiptrigger">{title}</a></td>
            <td>{location}</td>
            <td>{price}</td>
          </tr>
        </table>
      </div>
      <div class="tooltipContent" id="sprytooltip" spry:detailregion="eventsDS">{tooltip}</div>
<p><a href="#top">back to top</a></p>
      <script type="text/javascript">
var sprytooltip = new Spry.Widget.Tooltip("sprytooltip", "#tooltiptrigger");
      </script>

I see & chars in your xml, try wrapping it in <[CDATA[
]> tags like this:
<description> <[CDATA[Beer (B), Beer & Wine (BW)
or Beer, Wine & Liquor (BWL)<br />
Off sale only, no consumption on the licensed
premises]]></description>
Also if check out your xml in firefox, you will see that it
shows a parsing error, most likely caused by the issue i addressed
above.

Build a table based on XML data set with Spry

Hi there,
I'm new to spry technology therefore forgive any basic question of mine.
I'm trying to fill content in a table based on XML data set values but nothing is shown :-(
here is my code.... any suggestion? pls tell me where I'm wrong.
Thank you in advance
<script src="SpryAssets/xpath.js" type="text/javascript"></script>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script type="text/javascript">
var uscite = new Spry.Data.XMLDataSet("data/Calendario 2011.xml", "csv_data_records/record", {sortOnLoad: "Date", sortOrderOnLoad: "ascending"});
uscite.setColumnType("Date", "date");
uscite.setColumnType("km", "number");
</script>
<div class="RankContainer" id="UsciteDiv" spry:region="uscite" >
          <table width="100%" border="0" class="RankTable">
            <tr>
              <th width="10%" scope="col" spry:sort="Date">Data</th>
              <th width="20%" scope="col">Destinazione</th>
              <th width="5%" scope="col">KM</th>
              <th width="35%" scope="col">Percorso</th>
              <th width="30%" scope="col">Breve</th>
             
            </tr>
            <tr>
               <script type="text/javascript">
       var rows = uscite.getData();
    for (var i = 0; i < rows.length; i++)
     if (rows[i]["Mappa"].startsWith("/"))
      rowContent = "<td> si </td>";
     else
          rowContent = "<td> no </td>";
     document.write("<td>{Date}</td>");
     document.write("<td>"+rowContent+"</td>");
     document.write("<td>{km}</td>");
     document.write("<td>{Percorso}</td>");
     document.write("<td>{Breve}</td>");
      </script>
           </tr>
          </table>
       </div>

Sure this is how it should work (except that no anchor tag shall be present for Destinazione whereas Mappa has no real value in)
http://www.gsc-borsano.it/_Calendario%202011.html
and this is the non working page
http://www.gsc-borsano.it/_v2Calendario%202011.html
Thanks

XML Data Sets and IE8

I have an issue with Spry XML Data sets that is driving me nuts.
The setup is quite straightforward. I have a PHP script which submits a SOAP request, the result of which is pure XML. I echo this XML out as the result of the script.
I have another page on which is one or more Spry XML Data Sets. These data sets use the previous script as the source. I know this works OK because when i 'Get Schema' in the XML dataset dialog in Dreamweaver, the schema is properly displayed. This page also has a Spry Table on it, which uses the dataset as the source. There is nothing else on the page at all.
Now, when I preview this page in Firefox, Chrome, Opera or Safari, it displays fine. However, when I preview it in IE, the table briefly flashes up then disappears. A quick look at the source of the page shows the HTML all laid out very licely, but the Spry fields still show with their placeholders (e.g. {Balance}) instead of the actual value. Im left with a totally blank page in IE.
I have tried running in compatibility mode with no effect. I found a posting on Experts Exchange (yuk!) where someone else was having the problem but this turned out to bedue to badly formed XML. I have run my XML though XMLSpy and several online validators and it checks out every time.
Any ideas? I am slowly losing the will to live....
Si

Hi,
I'm trying to debug the same problem...I think.The pages work in firefox on PC & MAC but stop with the {data_name} in IE on both PC & MAC.
I'm using Dreamweaver CS3 with ADDT. I've read the posts about adding the content-type to my file that ADDT created for me just before the XMLExport, so I've added that to the get_menu_1_info.php file (see lines 42-46). I've peeked into the XMLExport.class.php file to see that the Execute function is supposedly already sending the header info (see line 223). But I'm not getting the data into IE.
Any help would be appreciated!
here's where you can see the page:
https://hbblearning.org/Takv3uMYsX7cVK5eRo/newcomer_info.html
here's where I generate the xml file to be consumed:
https://www.hbblearning.org/get/get_menu_1_info.php
I've attached the files for you to see.

Spry xml data set, accessing specific rows

Hello. I've been trying to build a website using Spry XML
Data Sets, and while I've accomplished my goals for now, I don't
think the solution I came up with is the best.
The website consists of several areas that show projects.
Each project has several fields that are to be filled with content
retrieved from the xml files, but the projects are not all exactly
alike and some have specific fields that others don't require.
All the info is available in several languages, so for now
I've created an xml file for each one. An xml file could be like
Code Part1. (Why I can't add several code snippets along the post
baffles me. I mean, I can't, right?)
This dataset, for simplicity purposes, is not dependent on
the language (Code Part2).
And then there are the content areas (Code Part3).
So as you see, each project has its own structure. This makes
using spry:repeat a not very effective method for filling in all
the content. Ideally I should be able to access each row in the
dataset through some sort of value, like id, or one of its
children's values. The ds_RowID depends on the row order, so unless
there's another way to use it, it doesn't solve my problem.
Here's what I've come up with (Code Part4).
This works (in FF3 OSX, at least), although there are some
other problems that might make it necessary to create a spry:region
(or at least use spry:repeat) for each field. Anyway, it sounds
silly and wasteful to go through every row of the dataset everytime
for each of the fields that need to be filled.
My hope is that I'm ignorant of some much better method of
achieving my goals, something more direct and elegant.
Can anyone help me out with this? Thank you very much in
advance.

Hi there
You are indeed absolutely correct a spry region should have been shown, my appologise for that, the code is wrapped in a standard spry region.
That being said i have used a work around in the SQL SELECT statement of the xmlExportObj, Recordset to find the information required without having to do any IF, ELSE on the page.
Many thanks for your reply and for pointing out my mistake in how I had presented my question.
My next question is to follow seperately
Regards
Ray

Spry Tables and Xml Data Sets viewed in IE7

Has anyone ever run into a problem with Spry Tables and Xml
Data Sets viewed in IE7? Work fine in IE6 and Firefox, but get the
error "exception caught while loading feed.xml: [object Error]" in
IE 7. Any ideas?
Attached is the xml I'm using.
Thanks

I came looking for the answer to this question. I could not
find an answer. Eventually I found it the answer that worked for
me, a graphic designer with not much experience in xml.
The following url provided an errata file in PDF format:
www.peachpit.com/dwcs3cib
which includes the following addendum to the incomplete
instructions in the book i was using to learn about spry:
"If Internet Explorer 7 is your primary browser, you'll nee
to take some extra steps to view spry dynamic content locally.
First, your site must be within the local server webroot; be sure
your Lessons folder is stored within the Inetpub>wwwroot folder.
Next, double-click the site name in the files panel to open the
Site Definition dialogue. Click the Testing Server category; from
the Access List choose Local/Network. Click Okay to close the Site
Definition dialogue. Now, when you preview your page with Internet
Explorer, your local Web server (localhost) serves the page as
designed."
Horray for me! Now i can move on from here and actually get
some work done!

Spry XML data set and dynamic post variables

Hi,
I am trying to create an XML data set that has dynamic post
variables.
Everytime something is pressed on the page a variable changes
and I then want to reload the XML data set using the new variable.
I know I can just pull in an XML with all possible variables
and filter client side but this would make it way too large.
Does anyone know what I may need to do.
I tried this:
var myVar = 0;
var dss = new Spry.Data.XMLDataSet (
'../../cgi-bin/server_details.pl' , 'top' , { method: 'POST' ,
postData: sid=ajaja21&ip=127.0.0.1&cid=' . myVar ,
subPaths: [ "auth" , "plugins" , "plugins/plugin" ] , keepSorted:
"true", sortOnLoad: "plugins/plugin/order", sortOrderOnLoad:
"descending", useCache: false, loadInterval: 10000 } );
onclick="myVar=1";
But the script doesn't understand the post variables sent (it
does when I remove the . myVar part and put in a static value). I
think it isn't sending that dynamic variable with the post
variables.
Any ideas anyone?
Thanks

Well I had it working when I stripped back everything and
just had the dss data set and a single onclick function, but now
that I put it back together it hash foobared again.
Here are the relevant bits of code that I've changed.
The function to change server id:
//function to run when changing the server id
function changeServer ( sid ) {
//set the url to use the current server id
dss.setURL = ( '../../cgi-bin/server_details.pl' , { method:
'POST' , postData:
'sid=7gv1m3vjvagfl7h7qeefb8iodj8evhmb&ip=127.0.0.1&cid='+sid
//force a reload of the server data
dss.loadData();
The inital load of the data set
var dss = new Spry.Data.XMLDataSet (
'../../cgi-bin/server_details.pl' , 'yams' , { method: 'POST' ,
postData:
'sid=7gv1m3vjvagfl7h7qeefb8iodj8evhmb&ip=127.0.0.1&cid=0' ,
subPaths: [ "auth" , "plugins" , "plugins/plugin" ] , keepSorted:
"true", sortOnLoad: "plugins/plugin/order", sortOrderOnLoad:
"descending", useCache: false, loadInterval: 10000 } );
And the part that changes the server id
<td align="left" style="cursor:default; width:174px;"
onclick="changeServer({dsv::servers/server/@id})">{dsv::servers/server/name}</td>
I checked that the function is receiving the correct server
id and I even tried hard coding the cid variable to 2 in the change
function but it still wasn't changing on the server side.
Any ideas?
Thanks

Formatting tags in xml data set used for spry region

I am trying to put <p>,,,</p> tags in my xml data set but they cause the field to not load. For example I would like to create an xml file as follows:
<blog>
      <blogentry>
          <blogdate>Jan 2009</blogdate>
          <blogtitle>January Blog</blogtitle>
          <blogtext><p> this is a paragraph</p>
<p>and so is this</p>
          </blogtext>
     </blogentry>
</blog>
When I do this I don't get anything in the spry region. If I remove the <p>,</p> tabs it works.
Is there anyway to do this (not just with <p> but with any tags ... ie. tables, etc.).
Thanks/Hal

I have an online example:
http://www.pearlmanpr.com/perspective_test.html
The spBlog.xml file contains test junk. If I put the <[[CDATA....]]> inside the BlogEntry/BlogText tag it doesn't work at all.
http://www.pearlmanpr.com/perspective_test_2.html
If I use it without the <[[CDATA..]] it doesnt work either.
http://www.pearlmanpr.com/perspective_test_3.html
If I use it without any <> within the tag it sort of works (still needs to be aligned).

XML Data Set selection by attribute?

I am new to Spry and was trying to work with the XML Data Set
feature. I have an XML file with the schema listed below. I wanted
to know if it were possible to only grab the data from this XML
file if it matches a certain type? For example, grab data from
seminarType where @type="condition1"? Is this able to be done or
will I have to generate an XML file for each type? My goals was to
have one large file to grab data from.
<seminars>
<seminarType type="">
<seminarSession type="">
<seminar>
<location><![CDATA[]]></location>
<date></date>
<time></time>
<seats></seats>
<directions><![CDATA[]]></directions>
</seminar>
</seminarSession>
</seminarType>
</seminars>

The seminar node contains all the information I want to grab.
I need to be able to select those nodes based off seminarType @type
and then seminarSession @type.
Example:
<seminars>
<seminarType type="type1">
<seminarSession type="session1">
<seminar>
<location><![CDATA[location]]></location>
<date>12-12-2007</date>
<time>14:00</time>
<seats>23</seats>
<directions><![CDATA[mapquest
directions]]></directions>
</seminar>
</seminarSession>
<seminarSession type="session2">
<seminar>
<location><![CDATA[location]]></location>
<date>10-08-2007</date>
<time>10:00</time>
<seats>15</seats>
<directions><![CDATA[mapquest
directions]]></directions>
</seminar>
</seminarSession>
</seminarType>
</seminars>
So I would want to grab all the session nodes where
seminarType @type="type1" and seminarSession @type="session1"
Does this help?

Problems with Accordion styling

I'm quite new to the use of both Spry and CSS but fancied
having ago at setting up the accordion widget for my company's
revamped website - www.update.dcprint.co.uk
This works fine in IE7 Beta3 (I know, but couldn't resist
having a look at the app) but falls over in Firefox/Safari where
the tabs gain extra height for some reason. The CSS is embedded for
ease at the mo, but will be extracted to a seperate file once my MD
is happy with the design. To save me a lot of time does anyone have
an idea what causes this?

Sorry kimblas, you are quite right! That'll teach me not to
jump in without reading the comments :) OK, make a few changes
suggested by Steve, and played around with the css as per the
example (I think). It now works fine in Firefox if a little slow
(I'm assuming this is to do with the Flash movie and my painfully
old PC) but in IE7 it still wants to display the whole of the
selected content prior to the animation. Interestingily this wasn't
the case until I began to tinker to the recommended settings.
Unfortunately I can't get back to where it was to suss out what
code sorted it, nothing now seems to make a difference. Any
ideas?

Data Roaming Problems with Lumia 610 and 710 phone...

Data Roaming problem with Lumia Wndows 7.5 phones. We have a Lumia 710 and also 610 phones on Virgin pay monthly sim cards. We cannot get data raoming to work on either phone. We have tried in a number of locations in France and Switzerland. Virgin confirm roaming and data roaming are set up on our account.
- I have purchased Data Passes.
- Settings>Mobile Network active network shows current operator
- Data Connection is on,
- Data roaming option shows "roam",
- highest connection speed is 3G,
- network selection is automatic.
- Flight mode is off.
- Account settings are ok because everything works on Wifi.
- Connection has been full bars showing 3G.
- I have tried hard resets of phone, manual network selection, deleted browsing history,
- phone software reports that it is up to date,
- I have run Network Setup which confirms phone has been updated network settings for relevant operator.
- Telephone calls to Virgin from Switzerland could not resolve the problem.
- Discussions with Virgin since returning home have not been able to solve the problem. It seems to be an issue with Lumia phones.
Can anyone help please? Nokia - why doesn't this work on your phones?

I'm like what an OS this phone has. All I can say is that if you own MS stock dump it fast as the OS on this phone is so bad its not even funny.
I think what they are trying to do here is a last ditch attempt to capture the online services market but it isn't going to work, because they have made this OS to weird.
I'm a pretty seasoned user and I generally am able to get gadgets to work but dudes this puppy is something else. I have 14 days to exchange it so Im going to give it my best shot for another couple of days and see where it goes.
The phone itself is pretty decent otherwise I would have returned on the 2nd day. Its pretty fast and the screen is nice and bright and if not some major concerns I wouldn't be a complaining.
1st} There is no way to import your bookmarks into the phone without using a online service.
2nd} I haven't been able to successfully export my old contact list from my LG P500 Android.
The 710 seems to only use contacts that are stored on online services even though I have imported my contacts using the Contact transfer function on the phone.
3rd)The phone won't shut off while charging even if you shut the phone down , plug it in and it turns on no matter what you do.
The Zune software is all glitter and no meat too unfortunately.
I really wanted an alternative and the phone is such good value and a local new Provider has a 27 $ a month unlimited everything, but luckily they have a 14 day phone exchange policy.
I'm going to keep for a few more days and see if I can get it to work the way i want it to.
Moderator's notes: Profanity removed, such language is not tolerated on the forums, please read the forum guidelines.

XML data set problems with Accordion widget

Similar Messages

Maybe you are looking for