"XML declaration allowed only at the start document "on Safari Iphone3G

Hi
I get the following error message on my Iphone3G with Vodaphone Hong Kong:
"The following page contains the following errors:
error on line 4 at column 6; XML declaration allowed only at the start document
Below is a rendering of the page up to the first error"
Moreover I see nothing in the page its empty.
the corresponding URL is "http://smartone-vodafone.m-finance.net"(only avaible to vodaphone suscriber i guess
with APN:Smartone-Vodaphone)
does anyone get same problem? how to solve it?
thx very much

Hi,
I am not sure if you can access it because its for Vodaphone suscriber only, I access first to "SmartIn" service via http://wap.smartone-vodafone.com so thereafter I enter to an other payed financial page "PLUS" via "http://plus.smartone-vodafone.com" and then the "Quote" menu afterwards I cannot open the page to see the price of Gold/Silver which gave me the previous error message and blank page at this adress on my Iphone3G
"http://smartone-vodafone.m-finance.net/PLUSGS_ST/EN/index.jsp"
But when I surf on my Laptop I found it seems to be a service provide by this other company "http://smartone-vodafone.m-finance.net"
I tried different setting (console off/on) javascript/plug-ins/block pop up/accept cookies all On or Off but no succes. Its a pity because I bought Iphone3G only for that
Maybe Apple should discuss between Vodaphone and this company how to solve the problem. It maybe only one error line code because every other page are fine?? my
thank you very much again,

Similar Messages

Printer will only print the first document then will do nothing.

I am running a dell system with windows 7 pro 64 bit.
I just got an HP LaserJet Pro 400 m401n printer.
I downloaded the most current drivers for windows and updated the printer from the HP website.
The printer will let me print the first document after the computer is restarted. Sometimes I can print a second document if I print it back to back with little to no time between printing the first document. If more than a few minutes passes and I try to
print again the program im using to print enters a "not responding" state and goes into recovery mode. This happens with notepad, excel, word, or even printing directly from the internet.
I can open the printer properties and see the document just sitting with "spooling" out beside it. I assumed it was a printer spooling problem and tried going to the Services.msc and checking the printer spooler. Ive started it and stopped it several
times. Ive also gone into %WINDIR%\system32\spool\printers and deleted all files in this folder. This does not help. It still gets hung at spooling.
Next I just went to printer property and turned the spooling off completely, by having it send the document directly to the printer. Again the exact same problem but instead of getting hung in "spooling" it now just hangs "printing".
I have also gone to the printer properties on the ports tab to see if disabling the bidirectional support was enabled as per a google search result showing a potential solution. But im connecting the printer directly to the computer via a usb port so that
option is not even available.
The only thing that allows me to print again is doing a restart on my computer, then again I can only print the first document sent. Restarting the printer itself does nothing.

Hi James,
Did this printer work correctly before ?
To verify whether it is related to the printer ,please plug it in another machine to have a check if it is possible.
Considering it is a USB device ,plug in with another port to have a check or try to update the USB controller driver or reinstall the USB controller driver to have a check.
Please check whether the Event Viewer contains errors or warnings related to this issue .
I found a similar symptom in the HP forum ,the solution in it may be helpful:
HP LaserJet Pro 400 M401dne print only one page (document)
(720 Views)
http://h30499.www3.hp.com/t5/Printers-LaserJet/HP-LaserJet-Pro-400-M401dne-print-only-one-page-document/td-p/6456104#.VK5gLHkfrwo
You may need to look for help from the HP forum at the same time .
Best regards

Not to allow to save the billing document in the back date if FI period clo

Can anybody help me please. My FI period for october is closed. But there are still some open delivery documents in billing due list for October. So now let say on 7th december if i will make the billing documents by giving the date 30.11.2007 logically as FI period is closed it will allow to save the billing document but will not pass to accounting.
So this normaly happening in my industry endusers are creating the billing documents in the back date even after the period close so all the documents come into VFX3.
So can any body help me? Can we have any check if the FI period is closed for a perticular months if we will try to make the billing documents in the closed period it will not allow to generate the billing document rather saving the documents and blocking for accounting.
Reggards.
Laxmikanta Das.
09958119889.

Dear laxmikanta
I also not come across the situation what you said and hence dont have much idea about authorization group.
However, on going through the F1 help, it says
Procedure
 If only a limited set of users is to be able to post in a particular
 posting period, proceed as follows:
 o Add the posting period authorization (authorization object
 F_BKPF_BUP) to the authorizations of the selected users. Assign an
 authorization group (e.g. '0001').
 o Enter the account type '+' for the posting period variant to which
 the restriction is to apply. Enter the period(s) whose use is to be
 restricted in the first period, those which are available to all
 users in the second period, and the authorization group (e.g.
 '0001') in the last column.
Examples
 A posting period can be successively restricted. If, e.g. 10 users have
 the posting period authorization with authorization group '0001', and 3
 of these 10 users also with authorization group '0002'.
 If the period is only to be accessible to the 10 selected users the
 authorization group '0001' is entered in the posting period variant.
 Access can later be restricted to the remaining 3 users by entering
 '0002'.
From the above, I feel your requirement can be met.
Thanks
G. Lakshmipathi

Error:xml declaration may only begin enttties

my problem is that the code by the name DomEcho01.java in this tutorial
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/
compiles fine but at run time it gives me an error saying
"error:xml declaration may only begin enttties "
can ne1 tell me y is this happenin
thanx
sam

<?xml version='1.0' encoding='utf-8'?>

<slideshow
 title="Sample Slide Show"
 date="Date of publication"
 author="Yours Truly"
 >
 
 <slide type="all">
 <title>Wake up to WonderWidgets!</title>
 </slide>
 
 <slide type="all">
 <title>Overview</title>
 <item>Why WonderWidgets are great</item>
 <item/>
 <item>Who buys WonderWidgets</item>
 </slide>
</slideshow>i am using the same xml file that is given in the tutorial

Only reseting the cleared documents with exchange rate differences in FBRA

Hello,
we want only reset the cleared documents . We dont want to reverse the cleard documents. But When we try to do it we get a message Exchage difference are posted do you want to reverse it. Want we want to reset are in Doc.. currency. postings for August.
As i know when we have exchange rate difference we dont get an option only resettng but we get reseting and reversing.
May i know how to slove this situation.
Thank you
Chaithra

HiI
f you set this selection field then the settings in the ERD Setting column for this currency type are no longer relevant. The system calculates and posts exchange rate differences between order-related goods receipts and invoices not just for materials with standard price, but also for:
Materials with moving average price
Account-assigned transactions
Planned delivery costs
The valuation of the inventories or consumption is effectively done at the exchange rate for the goods receipt, and not at the exchange rate of the invoice. When you post the good receipts, the fixed exchange rate from the purchase order is not used, but the translation of the purchase order values to local currency is always done at the posting date of the goods receipt.
If you are using the material ledger with actual costing, the system does not include the posted exchange rate differences at period-end closing in the actual prices of the materials.
Regards
Antony

Why will my Imac (1 yr old) only print the full document in half a page?

Why will my IMAC only print the full document in half a page? All updated IOS downloads. My Laptop Mac does not do this, so I feel it is not the printer, but the actual computer. The full document is printed, it is just half a page, other half is blank. This is presenting a huge problem for school and also when I need to print a shipping label ( which I do often) for my business. I have several printers and it performs the mistake on all of them. Thank you!

Make sure the scale in the Print window is set to 100%

MIRO should be allowed only for the accepted Qty (QC accepted qty)

Hi Friends
I have one more requirement ,
MIRO should be allowed only for the accepted Qty (QC accepted qty) or Subcontract MIRO should be allowed only for the quantity accepted by QC
with QM control key in material master(QM view) we can block for payment,
but my query is MIRO should not be saved (message should come qty still lying in Quality inspection stock)
Please let me know the settings,
Thanks & Regards
Gajendranath

Hii,
Yes it is possible to restrict Invoice passing in MIRO if the Stock is in Quality stock / Blocked stock. The concept is while doing MIRO, u can validate the criteria by clicking simulation tab. U can get the things in BADI (Business ad in function) with the BADI object name as "Invoice_update".
The working is when the material is in quality stock & If ur doing MIRO for the same material, then system will pop up the message that "material with "X" qty is in quality stock" Invoice cannot be made. System does'nt allow u to pass the Invoice unless the stock is cleared from the quality. Even for the blocked stock we can simulate these error pop message.
with regards,
K.Lokesh.

Adobe Reader will not open documents. Will only open the same document regardless which document I select.

Adobe Reader will not open documents. Will only open the same document regardless which document I select.

Instead of writing the exact sentences twice, how about some details?

I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Force the xml declaration to show when the xmltype in generated

Hi.
I use oracle 9.2i .
When i generate the XML the xml declaration doesnt show.
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
Only if i do a getclobval(), but that returns a string that has spaces and alot of other stuff that i don't want.
Is there any way to return the xml declaration when i call a xmltype?
I know i asked a similar question before, but the answer i got was to use getclobval... but must be another way..
I hope you can help me, cheers.

Maybe time to patch??
SQL> select * from v$version where rownum = 1
BANNER
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
1 row selected.
SQL> select xmltype
 ('<?xml version="1.0" encoding="UTF-8" standalone="no"?>'
 || xmlforest ('some_value' as "root_element")
 ) xml
from dual
XML
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<root_element>some_value</root_element>
1 row selected.

Creating XML from XSD, Only create The First Element

Hi,
I create a XML File from a xsd schema by this way:
 DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
 factory.setNamespaceAware(true);
 factory.setValidating(true);
 factory.setAttribute(JAXP_SCHEMA_LANGUAGE,W3C_XML_SCHEMA);
 factory.setAttribute(JAXP_SCHEMA_SOURCE, new File(MY_SCHEMA));
 DocumentBuilder documentBuilder =factory.newDocumentBuilder();
 documentBuilder.setErrorHandler(new SimpleDOMHandler());
 Document parse = documentBuilder.parse(new File(MY_XML));The first lines of the schema:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
 targetNamespace="http://gencat.net/scsp/esquemes/peticion"
 elementFormDefault="qualified" attributeFormDefault="unqualified"
 id="Peticio" xmlns:p="http://gencat.net/scsp/esquemes/peticion">
 <xs:element name="Apellido1">
 <xs:simpleType>
 <xs:restriction base="xs:string">
 <xs:maxLength value="40" />
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="Apellido2">
 .............................The problem is that the created document only have the first element "Apellido1". I dont know if it is a wrong xsd, or i'm using a bad way to do it.
Thanks a lot, and apologize for my english

Hi,
Is it possible to create and populate XML from an XSD
without knowing what the XSD elements are beforehand
(all the examples appear to know what the input XSD
will be, and therefore know what the set and get
methods should be called)? I think it is possible--you would have to recompile each time (unless you can dynamically recompile, which would be neat), but using the classes getMethod() function, you can list all the methods. You would then have to do some tricky logic to determine which of the getMethods you want (for example NOT getClass()), and you can basically call them in sequence. You also need to worry about handling lists & recursively call xxxType classes.
I'm experimenting with this, and it can get a little frustrating because there are a lot of odd cases to handle (for example, while setting the elements of a list, you need to actually get the list & add elements to it), but I think it's possible.
>
Can a user browse for an xsd to input, and the java
will dynamically create the get methods, and be able
to create instances and populate variables before
converting to XML?
What I'm puzzled about is where you'd get the data to populate the variables? Perhaps a database, or a bean? If you just want to make a test xml file, then it doesn't matter, but with real data, I think you'd still have to change how you actually get the variables you want to populate the xml file with, right? In other words, if your schema changed, the parameters you're passing to the set methods would change as well.
Maybe we'll see some more packages in the future to make this task easier.

When ever I right click on the menu item "open containing folder" in the downloads window, it only opens the 'My Documents' folder. It never goes any farther than that. How do I fix this?

Open 'Tools----downloads'.---Right click on any downloaded file that is available in the list.---click on 'Open Containing Folder'
Results in opening the My documents folder.
Not in the folder I have listed in Tools ---Options --- General---downloads---Save files to:

You can use this extension to modify the menu.
*Menu Editor: https://addons.mozilla.org/firefox/addon/menu-editor/
You can also achieve this with code in the userChrome.css file below the default @namespace line.
*http://kb.mozillazine.org/userChrome.css
The customization files userChrome.css (interface) and userContent.css (websites) are located in the chrome folder in the user profile folder.
*http://kb.mozillazine.org/Editing_configuration
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#context-sendimage,
#context-sendvideo,
#context-sendaudio { display:none!important; }</nowiki></pre>

Not allow to save the billing document in the back date if FI period closed

Hi ,
We have a requirment in which end user should not be able to create the billing document if the billing date lies in FI posting period which has been closed.
As of now the users are being able to create the billing documents even if the Billing date lies in the closed posting period but the sccounting document does not gets generated.
Now we want to block the billing document creation as well.
Please provide some pointers to the above scenaio. Thanks..

hello,
Has your query been solved.
if not , here is the solution.
go to the program RV60AFZZ. This is the exit for billing.
In that there is a form called
FORM userexit_number_range USING us_range_intern.
in the form you have to write the code.
variables to pass for the function module.
DATA: lv_buper LIKE t009b-poper,
        lv_gjahr LIKE t009b-bdatj.
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
      EXPORTING
        i_date               = syst-datum
        i_periv              = 'V3'
     IMPORTING
       e_buper              = lv_buper
       e_gjahr              = lv_gjahr
in lv_buper you will get the last posting period which is open ie the posting period month.
based on lv_buper you get , you can write your validations.
You have to remember that the posting period which u get is based on the fiscal year.
hope that helps.
reward if useful.
cheers,
Ravi Kiran.

In Outbound Delivery, PGI to be allowed only to the Current Date(System dt)

Dear Friends,
Kindly provide me the options to check that the PGI to be done only for the Current date ( System Date ) in Outbound Delivery.
Thanks & Regards
T.Arulvanan

Hi,
Please ellorate your question in more detail.
Normally the system does the PGI date is the current date.You can check in Actual Goods Movement Date.
Thanks & Regards,
Hemant Patil

Allowing only pdf files in document library using Javascript

HI,
I have a document library in sharepoint 2013, where i want only pdf files to get uploaded in it. I have created event receiver for the same and it is working fine. but i want to restrict the files using javascript on
the page itself, since, In event receiver, after the file is getting uploaded, it is checking and throwing error. So, is there any way to check for the file type before uploading the file and show error message if wrong file is uploaded?
Harikrishna Baskaran

Bind event to the upload button and add jquery to validate the file extension. Refer to the following posts for more information
http://stackoverflow.com/questions/13124950/change-onclick-event-input-type-button-in-ie-8-9-ff-with-jquery-won%C2%B4t-wo
http://stackoverflow.com/questions/4234589/validation-of-file-extension-before-uploading-file
--Cheers

"XML declaration allowed only at the start document "on Safari Iphone3G

Similar Messages

Maybe you are looking for