XML document could not be created because server memory is low( SCOM 2012 R2).

Hi
I am facing below issue in the scom 2012 r2.
please find the error below
On SCOM MS:
Alert name :Data Warehouse relationship synchronization process failed to write data
Alert description :Data Warehouse relationship synchronization process failed to write data to the Data Warehouse database. Failed to store data
in the Data Warehouse. The operation will be retried.
Exception 'SqlException': Sql execution failed. Error 6624, Level 16, State 1, Procedure sp_xml_preparedocument, Line 1, Message: XML document could not be created because server memory is low. Use sp_xml_removedocument to release XML documents.
Event id in Operation log:
Event id :33333
Data Access Layer rejected retry on SqlError:
Request: DataWarehouseSynchConfigChangeTypeGet -- (InstalledManagementPackXml=<ManagementPacks><ManagementPack>7b9f4239-7351-e72b-4ce4-d6c56ddb401d</ManagementPack><ManagementPack>848edb97-9da5-e2ae-24d4-56...),
(RETURN_VALUE=-6)
Class: 16
Number: 6624
Message: XML document could not be created because server memory is low. Use sp_xml_removedocument
to release XML documents.
ON SCOM DB server:
SQL version : SQL 2012 SP1 X64 bit Host all SCOm db (SCOM DB,SCOM DW,Reporting)
Ervent id : 28005 ,Application log,source: MSSQLSERVER
Please suggest me in this regard.
Thanks
sridhar v

For fix error 33333, you can refer below links
http://opsmgradmin.blogspot.com/2011/05/scom-event-id-33333-in-scom-from-source.html
http://systemcenterblog.blogspot.com/2009/11/error-id-33333-data-access-layer.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Similar Messages

HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Apple Id could not be created because of a server error?

I just upgraded to ios6 and it asks me to login to my apple account but I keep getting the "apple id could not be created because of a server error." message. Did my upgrade go badly or am I not alone?

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

"The home folder could not be created because the network name cannot be found" error in AD users and computers

Our home folders are stored on a non-windows NAS device and with Windows XP and 2003 we've always got the above error when creating or modifying users home folders, even when the shares were al ready created and being used.
However this was never really a big issue as the error that popped up was really for information and finshed with a "we've modified the user properties anyway, please create the share manually" type message.
Unfortunately now we are moving to windows 7 and 2008R2, this last part of the the message is missing and it won't accept the correct value.
This issue may be in the way that the NAS device shares the folder, as only the username that matches the folder name can access the share. This behaviour can't be modified.
Is there a way to get Windows 7/2008R2 AD users and computers to behave the same way that Windows XP/2003 does , i.e. don't try and create the share just set the value in the user properties ?
The AD is still at 2003 level and we can still use Windows XP/2003 clients to make the changes but this is a bit of a limitation.

The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

The process could not be created because the maximum number of asynchronous responses (5) has already been reached, and it will be dropped.

Hi
he process could not be created because the maximum number of asynchronous responses (5) has already been reached, and it will be dropped.
Command executed: "C:\WINDOWS\system32\WindowsPowerShell\v1.0\powershell.exe" -command "&G:\SCOM\SCOMModule\Notification\SMS.ps1 -scomalertid:'{c5a013e7-5408-468a-9b04-febab33cc56d}' -alertname:'Common Primary Database TableSpace
Threshold Alert' -alertdesc:'TableSpace TEMP FreeSizePercent:0.4375\n' -alertstate:'Closed' -alerttime:'7/26/2014 1:55:19 PM' -Priority:'1' -Severity:'2'"
Working Directory: g:\SCOM\SCOMModule\Notification
One or more workflows were affected by this.
Workflow name: Subscription852fbf70_40eb_450c_874d_46b631ca1352
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group:******
Please help me
Thanks

Hi,
the RMS is "Root Management Server". When you install first management server it becomes RMS. The RMS is relevant in SCOM 2007x management group. You can identify which server is RMS in administration console under management server view. Look for instance
with "yes" value in "Is RMS" column.
If you have SCOM 2012x version management group create sugested registry entrys on all management servers (MS) which executes command channel.
This will surely solve your
problem.
Regards,
Ivan

While trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.

while trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.

It's absolutley scandalous that a company with Apple's resources can let this happen. They should have staggered the release by region rather than opening the flood gates. The upgrade itself took me about 10 attempts to download it, and then I thought I was home free. That was until it rebooted and won't activate. It's over 2 hours now.
Scandalous!

Trex Index could not be created HTTP server error: 503 (Errorcode 7266)

Hi Friends,
I have installed EP6.0 SP15 on one machine and Trex 6.1 on another machine.All the services are green in the Trex monitor.And also i am able to get a reply from http://host:30205/TrexHttpServer/TREXISAPIExt.dll?CMD=PING.Connection sucessful.While creating my first index in Index Administration i get this error message.
"Index could not be created; creating index failed: HTTP server error: 503 (Errorcode 7266)."
Please tell me as to what steps i am missing and also where can i see the log message in portal.
Thanks
Sidharath

hi friends,
I went through the settings of trex services on server and found out that even after installing IIS 6.0 it was showing the path of Apache that that is i think the reason that httpserver is green but it is not using the CPU resources.I will share the setting with you.
[queueserver]
executable=TREXQueueServer.exe
arguments=-port 30204
startdir=C:\usr\sap\trex_02
starttime=5000
instances=1
#hp_32:environment=_M_ARENA_OPTS=1:256,_M_SBA_OPTS=512:100:16
As the executable for queserver is there so it is using cpu resources.
[apache]
executable=httpd
arguments=-d C:\usr\sap\trex_02/Apache -R C:\usr\sap\trex_02/Apache/libexec -F
startdir=C:\usr\sap\trex_02/Apache/bin
instances=1
As there is no folder for apache in trex installation so i think it is not working.Please check the setting in Trex Administration->Configration->Choose name server and on the right botton of it is edit services.Double click it and you will see the settings as i have shown above.Please share the settings with me as i will be then able to work with trex.
Do i have to install Apache instead of IIS6.0.Please guide me.
Thanks
Sidharath

ORA-20100: AppDomain could not be created for the specified security level

We recently updated our development environment to Visual Studio 2010. We have previously deployed (with success) .Net stored procedures from Visual Studio 2005 to our Oracle 10gR2 database. I am currently trying to configure a local instance (called local) of Oracle 10gR2 database to test deployment of .Net stored procedures to Oracle 10gR2 via Visual studio 2010 and ODT version 11.2.0.1.2. I have built the demo from the ode developer guide and gotten as far as deploying it but executing the stored procedures from VS 2010 or SQL*Plus produces the following error...
ORA-20100: AppDomain could not be created for the specified security level
ORA-06512: at "SYS.DBMS_CLR", line 152
ORA-06512: at "SCOTT.GETDEPTNO", line 7
Here is what I have done.
(Server)
1. Installed oracle 10gR2 with ODE.Net
2. Installed Oracle 10gR2 patch set 22
3. Installed ODE upgrade from Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21
(Client)
4. Installed Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21 (In new client home).
5. Installed patch set 22 on 10g client home.
6. Installed Oracle 11g Release 2 ODAC 11.2.0.1.2 with Oracle Developer Tools for Visual Studio(in new 11g client home, only for VS 2010)
I have made some minor changes (GAC) etc. per the following threads...
ODE.NET 11.1.0.7.20 on 10g Database?!
Re: Error: System.TypeInitializationException
The database appears to be fully functional via TOAD - SQL plus etc. I can't find much on this error but it appears Oracle needs some permissions to launch an ASP.Net application that it does not have. Any help would be GREATLY appreciated, don't hesitate to ask for additional details.

The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

Document could not be printed - no pages selected

I attempted to print a range of pages of a pdf document. Acrobat says the document could not be printed because there were no pages selected to print. This was not true. I was able to print a range of pages from Apple Preview, so that means the file is OK. Therefore, Acrobat Pro has a bug. I am using Yosemite on my iMac, with Acrobat XI.

Hi -
Maybe this will help others get around or solve this issue. I was trying to print a 67MB PDF created in INDD (similar to others created and printed that day) and got the same messages as other posters:
Document could not be printed
There were no pages selected to print (even though All was selected)
I updated to 11.0.10 and continued to get these messages.
Ultimately Distiller was the solution.
cheers all

"The document could not be opened" type problem

My OSX 10.3.9 or G5 Hardware has recently been saying "The document could not be opened because (file) is in the Trash" The problem is, the file is not in the trash but in a folder on my HD or on the desktop. This problem happens when I double-click the icon for the file to open it (in InDesign), but seems to clear up when I drag the icon to the InDesign program to open it. Same thing happens with Photoshop documents. I've checked and neither of the files are in the Trash.

Look in your harddrive Library folder, for a folder named ScriptingAdditions. Inside of that folder there should be a file called Adobe Unit Types. There is also one for Quark, if you have a copy of Quark.
These files have to be there for you to double click to open these programs. It seems weird, because all of the other programs you can double click and open.
I noticed that these files disappear sometimes during a crash. After reinstalling mine, I made a copy of them, for quicker replacement.

Error: Document could not be found...

The last four documents that we have sent to individuals for signatures through Adobe eSignatures have encountered the following issue:
"Document could not be found because of one of the following reasons:
* Document was rejected by one of signatories
* Document was cancelled by initiator
* Document was deleted by initiator
* Document has expired".
The document still remains in the Awaiting Signature tab and has not been rejected, cancelled, deleted or expired by any of the signatories or initiator. When an attempt is made to cancel the document and re-send, the same error occurs. Is there any way to troubleshoot this error?

Hello PW, I am having this problem and all suggestions haven't worked yet. Where is the Preferences|Documents you are referring to? I am on a PC and using Windows.
EDIT: I found it and did, but still not working.

The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010

Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta

Upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy

Hi All,
upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy button.
This is the issue which I am facing while working with SharePoint 2010. In a sharePoint 2010 document library I am having an excel file and I am trying to open it from Windows 7 and is office 2010.
I cam e across few suggestion as mentined below but unable to find the location where to do
Go to Resource Policies > Web >
Rewriting > Custom Headers > (if 'Custom Headers' is not visible, click
Customize on the right top to enable the view).
Create a new policy with the Resource as <fully qualified domain name of the SharePoint server:*/*> (for example https://sharepoint.juniper.net:*/* ).
Create the action as Allow Custom Headers.
Apply the settings to the required roles.
Please suggest.

Hi rkarteek
All things you have to do is as follows:
1. Open regedit.exe
2. Naviagate to following key:
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\14.0\Common\Internet]
3. Click Edit Menu -> New -> DWORD with name of "FSSHTTPOff"
(without quotes)
4. Click on "FSSHTTPOff" and enter value of 1
5.
Close any Office Applications and browser sessions
6. Try to reopen your document (no more read only or failure to upload)
have a nice day!

The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server ...

Our setup is that we have two databases; a SQL Server 2008 database and an Oracle database (11g). I've got the oracle MTS stuff installed and the Oracle MTS Recovery Service is running. I have DTC configured to allow distributed transactions. All access to the Oracle tables takes place via views in the SQL Server database that go against Oracle tables in the linked server.
(With regard to DTC config: Checked-> Network DTC Access, Allow Remote Clients, Allow Inbound, Allow Outbound, Mutual Authentication (tried all 3 options), Enable XA Transactions and Enable SNA LU 6.2 Transactions. DTC logs in as NT AUTHORITY\NetworkService)
Our app is an ASP.NET MVC 4.0 app that calls into a number of WCF services to perform database work. Currently the web app and the WCF service share the same app pool (not sure if it's relevant, but just in case...)
Some of our services are transactional, others are not.
Each WCF service that is transactional has the following attribute on its interface:
[ServiceContract(SessionMode=SessionMode.Required)]
and the following attribute on the method signatures in the interface:
[TransactionFlow(TransactionFlowOption.Allowed)]
and the following attribute on every method implementations:
[OperationBehavior(TransactionScopeRequired = true, TransactionAutoComplete = true)]
In my data access layer, all the transactional methods are set up as follows:
using (IDbConnection conn = DbTools.GetConnection(_configStr, _connStr))
using (IDbCommand cmd = DbTools.GetCommand(conn, "SET XACT_ABORT ON"))
cmd.ExecuteNonQuery();
using (IDbCommand cmd = DbTools.GetCommand(conn, sql))
... Perform actual database work ...
Services that are transactional call transactional DAL code. The idea was to keep the stuff that needs to be transactional (a few cases) separate from the stuff that doesn't need to be transactional (~95% of the cases).
There ought not be cases where transactional and non-transactional WCF methods are called from within a transaction (though I haven't verified this and this may be the cause of my problems. I'm not sure, which is part of why I'm asking here.)
As I mentioned before, in most cases, this all works fine.
Periodically, and I cannot identify what initiates it, I start getting errors. And once they start, pretty much everything starts failing for a while. Eventually things start working again. Not sure why... This is all in a test environment with a single user.
Sometimes the error is:
Unable to start a nested transaction for OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLSERVERNAME". A nested transaction was required because the XACT_ABORT option was set to OFF.
This message, I'm guessing is happening when I have non-transactional stuff within transactions, as I'm not setting XACT_ABORT in the non-transactional code (that's totally doable, if that will fix my issue).
Most often, however, the error is this:
System.Data.SqlClient.SqlException (0x80131904): The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLSERVERNAME" was unable to begin a distributed transaction.
Now, originally we only had transactions on SQL Server tables and that all worked fine. It wasn't until we added transaction support for some of the Oracle tables that things started failing. I know the Oracle transactions work. And as I said, most of the time, everything is just hunky dorey and then sometimes it starts failing and keeps failing for a while until it decides to stop failing and then it all works again.
I noticed that our transactions didn't seem to have a DistributedIdentifier set, so I added the EnsureDistributed() method from this blog post: http://www.make-awesome.com/2010/04/forcibly-creating-a-distributed-net-transaction/
Instead of a hardcoded Guid (which seemed to cause a lot of problems), I have it generating a new Guid for each transaction and that seems to work, but it has not fixed my problem. I'm wondering if the lack of a DistribuedIdentifier is indicative of some other underlying problem. I've never dealt with an environment quite like this before, so I'm not sure what is "normal".
I've also noticed that the DistributedIdentifier doesn't get passed to WCF. From the client, I have a DistributedIdentifier and a LocalIdentifier in Transaction.Current.TransactionInformation. In the WCF server, however there is only a LocalIdentifier set and it is a different Guid from the client side (which makes sense, but I would have expected the DistributedIdentifier to go across).
So I changed the wait the code above works and instead, on the WCF side, I call a method that calls Transaction.Current.EnlistDurable() with the DummyEnlistmentNotification class from the link above (though with a unique Guid for each transaction instead of the hardcoded guid in the link). I now havea DistributedIdentifier on the server-side, but it still doesn't fix the problem.
It appears that when I'm in the midst of transactions failing, even after I shut down IIS, I'm unable to get the DTC service to shutdown and restart. If I go into Component Services and change the security settings, for example, and hit Apply or OK, after a bit of a wait I get a dialgo that says, "Failed ot restart the MS DTC serivce. Please examine the eventlog for further details."
In the eventlog I get a series of events:
1 (from MSDTC): "The MS DTC service is stopping"
2 (From MSSQL$SQLEXPRESS): "The connection has been lost with Microsoft Distributed Transaction Coordinator (MS DTC). Recovery of any in-doubt distributed transactions
involving Microsoft Distributed Transaction Coordinator (MS DTC) will begin once the connection is re-established. This is an informational
message only. No user action is required."
-- Folowed by these 3 identical messages
3 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
4 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
5 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
6 (From MSDTC 2): MSDTC started with the following settings: Security Configuration (OFF = 0 and ON = 1):
Allow Remote Administrator = 0,
Network Clients = 1,
Trasaction Manager Communication:
Allow Inbound Transactions = 1,
Allow Outbound Transactions = 1,
Transaction Internet Protocol (TIP) = 0,
Enable XA Transactions = 1,
Enable SNA LU 6.2 Transactions = 1,
MSDTC Communications Security = Mutual Authentication Required, Account = NT AUTHORITY\NetworkService,
Firewall Exclusion Detected = 0
Transaction Bridge Installed = 0
Filtering Duplicate Events = 1
This makes me wonder if there's something maybe holding a transaction open somewhere?

The statement executed from the sql server. (Installed version sql server 2008 64 bit standard edition SP1 and oracle 11g 64 bit client), DTS enabled
Below is the actual sql statement issued
SET XACT_ABORT ON
BEGIN TRAN
insert into XXX..EUINTGR.UPLOAD_LWP ([ALTID]
          ,[GRANT_FROM],[GRANT_TO],[NO_OF_DAYS],[LEAVENAME],[LEAVEREASON],[FROMHALFTAG]
          ,[TOHALFTAG] ,[UNIT_USER],[UPLOAD_REF_NO],[STATUS],[LOGINID],[AVAILTYPE],[LV_REV_ENTRY])
          values('IS2755','2010-06-01',
'2010-06-01','.5',     'LWOP'     ,'PERSONAL'     ,'F',     'F',     'EUINTGR',
'20101',1,1,0,'ENTRY')
rollback TRAN
OLE DB provider "ORAOLEDB.ORACLE" for linked server "XXX" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
Msg 7391, Level 16, State 2, Line 3
The operation could not be performed because OLE DB provider "ORAOLEDB.ORACLE" for linked server "XXX" was unable to begin a distributed transaction.
Able to execute the above statement successfully without using transaction.We need to run the statement with transaction.

The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.

I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
Here is code that illustrates what I am doing:
DECLARE @MDX varchar(max);
SET @MDX='
SELECT
[Measures].[Extended Service Count]
} ON COLUMNS,
NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
ON ROWS
FROM (
SELECT
{[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
FROM [MyCube]
/* Test 1 */
EXECUTE(@MDX) at SSASLinkedServer;
/* Test 2 */
DECLARE @ResultsB TABLE (
Manufacturer varchar(255)
, ExtendedServiceCount float
INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
Other articles I've found so far don't seem to apply to my case. I am not creating any explicit transactions in my code. When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
Any ideas?
-Tab Alleman

Hi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

XML document could not be created because server memory is low( SCOM 2012 R2).

Similar Messages

Maybe you are looking for