Xml error message

Hi,
im using file inbound adapter and done all the configuration in repository and directory when i start the adapetr engine i get the following error
Error when determining inbound interface. No inbound interface found for sender XI1 and outbound interface HTTP://SAP.COM/XI/FILE2IDOC.FILEINBOUND
i have declaredthe inbound interface in repository and directory .. do i need to do any thing else if i use file adapter as in bound.
pls help me out.
thankx ,
sri

Shree,
It took me a while with getting XI terminology - the sequence that a message has to pass ...
Inbound file adapter (w.r.t XI) reads file and passes the message to Outbound I/F (w.r.t to the sender) which in turn via Interface mapping (and message mapping which is optional) is passed to the Inbound interface (w.r.t receiver) and then to the outbound adapter (w.r.t XI) before appearing at receiver system.
The message leads me to believe you may have Outbound Interface defined but may have missing Inbound I/F and Interface mapping - pls. verify design steps.
- Sanjay

Similar Messages

XML Error Message for Every one hour in SXMB_MONI

Hi All,
I am getting XML error Message for every one hour in PI when I check in SXMB_MONI I can see this.
Details Below
Sender Componant : PI
Sender Interface : SAPCCMS
Reciever Interface/Reciever Componant : Both are empty.
PI Version 7.1
Can anybody help in this.
Dayakar

Hi!
I was just searching this about this problem and found a post that might interest you.
[urn:SAPCCMS;
cheers

Where I can find the XML error messages repository?

Hi guys,
I don't know where I can find the XML error messages repository? (SXMB_MONI)
I found a structure SXMSMSGDSP! But this is only a structure... I need a table or something like a program who can handle this structure.
I think, this structure is used to shown an ALV, but first, a method read from memory and handle these data to ALV functions.
There is a simple table or a kind of way to access this data (error messages) and manipulate it?
Thanks in advance,
Ricardo.

Hi,
U can check Table SXMSPERROR in in SE11....
Regards,
Sridhar Reddy

XML errors message (Product key not found/Invalid) in SNC5.1

Hi,
I am working on SNC project which includes POC scenario.I have completed all the required configuration in R/3 4.6c and SNC5.1 system. The master data (mat, plant,vendor and Info records) are CIFed from R/3 to SNC, BP and MoT created in SNC. All the MD BAdIs are implemented in SNC. I am trying to post a PO from R/3 to SNC, IDOCS are successfully generated, PI has converted the IDOCS into XML messages, but i am getting XML error in SNC system (sxmb_moni) which states-
1) Product key 000000000123456 (category ID) not found
2) Item 00001: Product is missing or invalid
3) Order, item 00001: Product 000000000123456 does not exist
4) BOL processing failed. XML-message inbound processing has been terminated.
I am able to post the PO successfully in SNC Web UI which has alpha numeric product number (eg- 1120-110), but products with numerical value leading zeroes (eg- 000000012345) do not get posted. These product IDs give error in SNC sxmb_moni.
I have set up the output format of product number with 40.
Appreciate your help.
Is there any kind of configuration required for leading zeroes in any of the systems (R/3,PI or SNC)
Appreciate your help.
Regards,
Edited by: Dmohite on Jun 11, 2009 11:09 PM

Hi Bharath,
Were you able to over come the error for products in the XML message? I have same issue, can you please briefly point me in right direction?
I am facing the error message " Product key 0000000000xxxxxxx (category ID) not found". can you please briefly mention how did you resolve?
In my case, the XML message had product number '000000000070000598' and I tried to implement BAdI to make the product number appear as '70000598' and still it failed.
Thank you in advance
Best regards
Vivek
Thank you in advance.
Best regards
Vivek

Problem: J2EE Server Component Library's provider.xml error message

Hello,
I open the provider.xml fle. Then I click on the Jars tab and I get an error message:
The source page has errrors. Other pages cannot be used until these errors are
corrected.
How can I correct the error(s) so that when I click on the Jars tab it will allow me add jar files?
provider.xml content:
======================
<?xml version="1.0" encoding="utf-8"?>
<provider-descriptor>
<display-name>Store jar files that need to be used at runtime</display-name>
<component-name>global/lmco/runtime/j2ee/libs</component-name>
<description/>
<major-version>6</major-version>
<minor-version>40</minor-version>
<micro-version>0</micro-version>
<provider-name>lmco.com</provider-name>
<jars>
 <jar-name>
 commons-dbutils-1.0.jar
 </jar-name>
</jars>
</provider-descriptor>

I have one provider.xml which has the dtd in it
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE provider-descriptor SYSTEM "library.provider.dtd">
<provider-descriptor>
<display-name>abclib</display-name>
<component-name>abcLib</component-name>
<description>
</description>
<major-version>6</major-version>
<minor-version>1</minor-version>
<micro-version>0</micro-version>
<provider-name>com.company</provider-name>
<group-name>
</group-name>
<references>
 <reference reference-type="hard">
 <reference-target provider-name="com.company" target- type="library">xyzLib</reference-target>
</reference>
</references>
<jars>
 <jar-name>aspectjrt.jar</jar-name>
 <jar-name>axiom-api-1.2.5.jar</jar-name>
 <jar-name>axiom-impl-1.2.5.jar</jar-name>
 <jar-name>nux.jar</jar-name>
 <jar-name>stax.jar</jar-name>
 <jar-name>xom.jar</jar-name>
</jars>
</provider-descriptor>
check for the DOCTYPE declaration
Regards
Fariha

XML Error Message when uploading

I've updated my blog to a podcast like the instructions said, my
Google Reader picks up the mp3 I put in it, but when I put my url into
iTunes so it will add it as a podcast it gives me this error:
"Error parsing feed: Invalid XML: Error on line 4: The entity name
must immediately follow ‘&’ in the entity sentence."
Have I done anything wrong? Can anyone help, please?

It's not possible to comment unless you would like to post the URL of your feed: please include the http://

Parsing XML Error Message

When I logged in today I got this message: "An unexpected error. Unable to parse the custom or default XML." What does this mean and will this continue every time I log on? Is there a way I can fix this? Is this critical?

Strange indeed.
I did a quick search through the Flash application folder and
Local
Settings/Application Data/Macromedia/Flash 8/ and found no
files containing
"<div>". Perhaps you should start there.
Or you could log in under a different user and see if the
error disappears.

Display SXMB_MONI XML errors in Solution Manager (CEN)

Hello All,
Requirement is to display the XML error messages in SXMB_MONI in our Solution Manager (CEN)? Could you please let me know the major steps that would be involved on the same?
Please share your thoughts!
Thank You,
Antarpreet

My apologies not reading it properly....
Solution manager also usess the same concepts of the CCMS as we do it in XI, so you can setup the XI envinorment details in solution manager and try to capture the alerts....
Here are the Steps:
Prereq:
All Satellite systems connected from Solution Manager on the "Transaction SMSY" screen.
Prepare RFC connections between Solution Manager and Satellite systems for data collection ( RZ20 Data collection RFCs)
Steps:
1. Register "SAPCCMSR" and "SAPCCM4.X" on Sattilite Systems to report ABAP and Java stacks in local systems and report to Solution manager System
2. On Solution Manager System ( Acting as Central System) configure CCMS monitoring sets fromRZ20.
3. RZ21 --> configure CCMS pings alert monitoring.
all info with step by step guide avalible from Solution Manager configuration guides and http://service.sap.com/rkt
( This ref from solution manager forum)
check this link also:
http://www.scribd.com/doc/7858198/Solution-Manager-SAP-NW2004S-Monitoring-Setup-Guide-SP12

Bilingual XML Parser Messages

Hi,
I am using the Oracle XDK to validate XML documents that are uploaded to our web site. The validattion is done against an XML Schema. If there are errors in the document I can display the errors to the client in english. However, I need to be able to display these messages in french as well. I have looked inside the xmlparserv2.jar file and seen that there is a properties file containing the french xml error messages. How do I tell the parser to use the french messages?
Thanks
Chad

No need to reply. Found the solution.
Thanks
Chad

Location of XML errors

Hello :)
Please tell me where (with which software) I might find the complete listing of XML error messages??
i.e. XML-0100 (Fatal Error) Expected ';'
<The text that would explain,
and possibly help resolve the problem>
XML-0101 Next Error....
Tia,
-Robert-

I am assuming you are using the Java Parser v2. There is no additional information regarding that error beyond its line number. Could you post the a file that throws that error?
Oracle XML Team

Print a custom Error message in the XML bursting program's log file...

Hi,
I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
Two things i want to know..
1- Whether is it possible to write into the xml bursting programs log file
2- If yes, then how..
note: it ll be greatly appreciated if the answer is elaborated.
thanks,
Ragul

Hi,
I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
Two things i want to know..
1- Whether is it possible to write into the xml bursting programs log file
2- If yes, then how..
note: it ll be greatly appreciated if the answer is elaborated.
thanks,
Ragul

Error message in .docx : 'Open XML file cannot be opened because there are problems with the contents. Details Unspecific error Location: 2'

I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
error, Location: 2'
When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
were illegible, but no other weirdness was observed.
I have microsoft 2008 installed on my Mac OS X version 10.6.8.
I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docx

Hi,
This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
Please use the "Fix it" tool in the following KB article to resolve the problem. See:
http://support.microsoft.com/kb/2528942
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Error while sending XML SOAP message to other network

Hi,
I have a java application using SOAP through which I am sending request to a machine in the same network. It is giving the response in xml and i am able to parse it.
But when I tried to give the IP in the destination i.e the IP in the other network.
Error message SAAJ 0009 i.e message sending failed is getting to me.can somebody help to me.
Thanks
Abhilash

Hi Ricardo ,
I have the correct port now.
the url looks like
http://<host>:50000/XISOAPAdapter/MessageServlet?channel=:SIEBEL_DEV:SOAP_CUST
when I am testing it in the XML spy. and send a soap server request. I am getting the popup for user authentication . once i put my user id it gives me a error saying
HTTP operation 'POST' could not be performed on URL
'/XISOAPAdapter/MessageServlet?channel=:SIEBEL_DEV:SOAP_CUST&version=3.0&Sender.Service=SIEBEL_DEV&Interface=http%3A%2F%2FOFCOM%2FUNIFY%2FCustomerMaster%5EMI_CUST' due to an error :
The connection to the server was terminated abnormally
Any Idea as to why is such a error is coming
Thanks for the help
Nikhil

Error message while loading XML parser into db

I get the following error message while loading xmlparserv2.jar
ORA-29534 referenced object SYSTEM.oracle/xml/parser/v2/XMLNOde could not be resolved
ORA-29545: badly formed class: java.lang.NullPointerException
using XSU111 package

I had the same problem. I did a search of the forum looking for the error number (that's how I ran across your question). It seems that the xmlparserv2.jar (v2.0.2.8 or 2.0.2.9) which is included was compiled with java 1.2 which is incompatible with Oracle 8.1.5 (which is what I have and probably what you have). You probably need xmlparser v2.0.2.7.
Do a search on the error number, the post is from Steve back on June 8. I found the correct version of the xmlparserv2.jar in my copy of the xmlschema stuff (xmlschema_v0_9_0_0.zip). I don't know which version is in the current xmlschema
(v1.0.0.0) but it is probably the new version.
Steve will email you the correct version if you ask.
Eric
<BLOCKQUOTE>quote:<HR>Originally posted by nrajav ():
I get the following error message while loading xmlparserv2.jar
ORA-29534 referenced object SYSTEM.oracle/xml/parser/v2/XMLNOde could not be resolved
ORA-29545: badly formed class: java.lang.NullPointerException
using XSU111 package<HR></BLOCKQUOTE>
null

Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide Solution

Hi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................

Xml error message

Similar Messages

Maybe you are looking for