XML Export Only Exports the Same Sequence

No matter which sequence I select for XML Export, it only exports the sequence named "SNO Intro."

Does your nested sequence have a different timebase than the parent sequence? Is it multi-cam? Are you selecting your parent sequence in the project window before exporting? If you copy everything from your nested sequence and paste it into the appropriate place in the parent sequence, does it export correctly? These are all just troubleshooting ideas to get to the real root of the problem.

Similar Messages

Export Limits for Multiple Sequences in the Same Sequence File for TS3.0

Hi,
I am using TestStand 3.0 to a test application. Because we want to have our limits in a csv-file I have tried to use the Import/Export tools in TS. But this application only supports to export limits for the selected sequence (e.g. main, or subseq1) at a time. This makes it a pretty hard job to export limits from 30 test sequences. What I need is a possibility to export my limits from �all sequences� in my seq-file.
I have found an article on NI Dev. Zone about �Export Limits for Multiple Sequences in the Same Sequence File (TestStand 1.0.x)�.
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3D9CB56A4E034080020E74861&p_node=DZ52236&p_submitted=N&p_rank=&p_answer=&p_sourc
e=External
I have tried to use this code but because it�s for TS 1.0.2 the limits from my multi num test step and my custom steptypes isn�t exported. So that doesn�t fulfill my needs.
Is there an updated version with �all sequences� added to TS 3.0? Is there other good solutions to my problem out there?
Best Regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

Hi David Mc,
Thanks for your reply. I have already considered this solution because the source code is added in the folder described in your reply. But that is not a good solution. It will cost me a lot of time to establish the toolchain, reverse engineer the source code, make the implementations and build a new dll (most off these is already knowledge by NI). And when NI make future releases of TestStand I have some merge work to do every time NI have made some changes in the files I have changed.
But as I write above: I have hoped that NI already has/or could made a solution like the one to 1.0.2 (see link in root) to me. And then they could include it in the next version.
I don't think I am the only one in the TestStand world that ne
ed this feature.
Best regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

How to export the same mb size of my cr2 files into jpg or tiff files in Lr?

How to export the same mb size of my cr2 files into jpg or tiff files in Lr?
Let's say my file size is 22mb, when i export the file to tiff or jpg, although Iam careful with the settings- file size, dimension, resolution, I can't manioukate how I want it.
With jpg I tried everything, no matter what i do or change in files size or resoltion it remains the same size- 7mb as opposed to 22..
Please advise,
Best wishes,
T

I would noramlly opt for a tiff file, sending such a high res through the nest a nightmare
This is probably just an improper use of terminology, but the resolution of a JPG, DNG and TIF should all be the same.
The files differ in size, not resolution and not number of pixels.
Jpg is not that bad, but its a pitty they have to be edited under a jpg format..
Your raws are edited as raw. There is no loss of quality in the editing process. The files are then exported as JPG, which will cause a loss of quality. For just about any use, the loss of quality in the image when you export a JPG at quality level 12 is NOT noticeable. For many uses, exporting a JPG at a quality level of 8 will not be noticeable either, unless you intend to print the photo at a very large size. As twenty_one (not his real name) said, "Jpeg compression is fantastically effective".

Can't re-export the same picture from Lr 3.6

I am new to the Lightroom. Several weeks I have processed pictures and wanted to post them on FB for our friends to see. In export option I decided to export them as 2x3 200dpi files. Now that I want the same pics for my album I was planning to use the same pics from the Lightroom but as bigger files with 300dpi. The Lightroom can't find the files. Somehow I thought of pics in Lightroom to be the library of pics as they are in iPhoto where they stay unless one dumpts them. Is there any way to re-export the same file again? Thanks

The issue disappeared this weekend. I didn't change anything so it must have been something server side. I notice others with the same issue have also seen it resolved.
Thanks to all those who contributed and tried to help out. Although disappointed I went for a long time without ePrint I'm glad that action was apparently taken to resolve in the end.

Why does Premiere render the same sequence sometimes fast and sometimes really slow?

I use Premiere Pro CC 2014.
I have a Nvidia GTX 590
Intel Core i7 X990 @ 3.47GHz
24GB RAM
Windows 7 (64)
200GB free space on an SSD drive and 2 more drives with each 1TB free.
I'm having trouble with performance when rendering sequences.
The sequences themselves are pretty simple. They contain MOV files from my Canon EOS 5D Mark III and transparent PNG files as overlays for titles and additional graphics.
I also use lumetri looks and have turned on Cuda rendering. As a codec for exporting I use H264 (fullhd, 25fps, 20mbits, 2pass, max render quality, max depth)
Whether or not I export in Premiere or via AME doesn't matter, the problem stays the same.
Now, when I start exporting, at one point, which is seemingly random (sometimes at 35%, sometimes at 60%, sometimes at 2% - I'm talking about the same sequence!) rendering becomes really really slow (~1 hour for a 3min video), and I don't understand why. I keeps slow until the whole sequence is finished. But before that, rendering was fast!
But sometimes, I'm lucky, and - after restarting my computer and Premiere, the same sequences render in whole, in under 2 minutes!
So obviously my computer is able to render fast. But it does not always do that. Sometimes - even after a fresh reboot, I'm out of luck and the same sequence renders in an hour - but only after a random point in the sequence.
It's as if Premiere stumbles and can't get up again. The only thing that CAN help (though does not alway), is rebooting the system and hoping for the best.
Where does this strange behaviour come from? I use ordinary footage, ordinary filters and an ordinary export codec. I have lots of RAM and lots of disk space
I have not found a topic in this forum with a similar problem

Similar problem here but on a Mac. AME is always much slower than directly exporting from Premiere, but if I start to get slow renders a reboot always sorts the issue out.

HT4236 How do you keep photos in the same sequence on the iPhone that they are on the PC folder?

How do you keep photos in the same sequence in the iPhone as they are in the folder on the PC??

When I sync my photos they are listed alphabetically (by folder) and within the folders, listed alphabetically again by the name assigned to the photo. The only way I can think of to keep the order that you have in your computer would be to assign a letter as a prefix to each photo. If you have more than 26 photos in a folder, you can double the letters, etc. I think that will keep the photos in the order you want.

How to get the XML Source again from the same RDF ???

If the one new column is added in the .rdf file, then how u create your new XML source by submitting the same cp?
When I ran the cp for 1st time, I was able to get xml source by view output, save it, make rtf and make data defn and template creation.
But how to get the XML source If the one new column is added in the same .rdf file?
Thanks
Ud.

The simple answer is: you don't.
Not only is it simply not possible, but the entire concept of "the active browser" doesn't exist.
You were on the right track with your code to retrieve the page directly from the server, but as you noticed that code will only work for regular http connections.
For https and other protocols you will need to use appropriate libraries for each protocol. Something like Apache Commons can help you with that. There are networking libraries in there for a lot of commonly used protocols.

How to make use of the results of one step at the other step in the same sequence

Hello
I am new to the Teststand.
I am using labview8.0 with teststand 3.1
Plz get me solution for the below
I am configuring the serial port resources like resource name, baud rate etc..,I made the initialization using setup task.I made serial port write and serial port read as independant vi's in labview and called them from teststand as steps.Now i need the same resource name appear in some other steps in the sequence .how can i get them using teststand commands instead of specfying them at each step.
Also how to pass values or results obtained from one step to some other step in the same sequence using teststand commands.
Also help me in parameter passing
Regards
Kiran

Hi Kiran,
I wrote some example code that demonstrates what you are trying to do. The sequence file relies on a local variable named visa_resource of type LabVIEWIOControl.
Regards,
Attachments:
test.zip ‏11 KB

Different sized clips in the same sequence?

I have footage from various types of cameras with resolutions ranging from 640x480 to 720P in the same sequence.
1. What is the best size to set my sequence? At the size of the largest clip?
2. What else can I do to make the different sized clips work well in the same sequence (with the understanding that 640x480 is low res and poor quality)?
Thanks.

Hi Stanwelks,
1) No, especially since the 640x480 material you have is not of good quality (even if it was you'd lose quality by enlarging the images). Sounds like that converting the HD material to SD could be your best choice especially if you have more standard definition material than HD.
2)Keep it simple. Convert the HD material to DV and work on a DV timeline. This way you can match your sequence settings to one format, making sure you don't get to render all the time and that the lower res material is not going to look any worse.

I would like to burn an i-photo album with subtitles to a CD with the photos in the same sequence as they appear in the album and to have the CD work the same on a PC as on the MAC.

I have created several i-photo albums with subtitles and proceeded to burn them to a CD. The CD burned with the correct subtitles, however, the photos did not appear in the same sequence. I tried another method and the photos appeared in the proper sequence, however, my subtitles did not appear as in the albums. Is there a method that I can burn an album to a CD with the photos in the same sequence and with the same subtitles as in the album?
I would also like this CD to work the same on a PC as it does on a MAC.

sorry but files on a CD have no order - filles are simply bits on the disk - the file viewer used to view them determines the order of viewing - for example using the finder on the Mac you can view files in Alpha order, date created order, date modified order, file size order, etc, etc, etc
If you expor tthe files to a desktop folder using the sequetial option then the finder (and probably Windows explorer) would display them in the order you want IF the user views them in alpha order
Bottom line is that you have no control over how the end user views files - that they make
LN

Japanese characters alone are not passing correctly (passing like ??? or some unreadable characters) to Adobe application when we create input variable as XML data type. The same solution works fine if we change input variable data type to document type a

Dear Team,
Japanese characters alone are not passing correctly (passing like ??? or some unreadable characters) to Adobe application when we create input variable as XML data type. The same solution works fine if we change input variable data type to document type. Could you please do needful. Thank you

Hello,
most recent patches for IGS and kernel installed. Now it works.

I am using itouch for music can i also us my nano 3rd generation to uploat podcasts only from the same library?

I have an ipod touch that i use for my music in itunes, my question is can i restore an older nano 3rd generation ipod and use it for podcasts only, from the same account that i use for the itouch...sorry if this doesnt make sence! I want to use two ipods in my library, one for music and one for podcasts...
appreciate any help! thx!
Linda

Yes. There is no limit to the number of iPods, iPads, and iPhones you can sync with one computer/iTunes library or account. On top of that, how you sync one iPod does not affect the syncing preferences of another.
How to use multiple iPods, iPads, or iPhones with one computer
Simply configure the Nano to only sync podcasts and nothing else.
B-rock

Inconsistent behavior in TestStand and TestStand UI for the same sequence file

Solved!
Go to Solution.

I tried both the TopLevelVI and testexec.exe; but both of them were giving the same error. I never tried any other UI than Labview.
Because the same sequence was working without any issue on some other system, I uninstalled and reinstalled TestStand 4.0 and same sequence is now working fine, in TestStand, testexec.exe, TopLevelVI – basically everywhere. I am not sure what was wrong with TestStand in my system, but definitely something wasn’t correct.
Thank you for all the responses.
Vidula
Message Edited by Vidula S. on 08-26-2009 10:28 AM

HT2513 how do I schedule daily events in the same sequence

How do I schedule daily events in the same sequence.

Hello LeatherneckDevilDog,
Thank you for the details of the issue you are experiencing with duplicate calendar entries. I recommend reviewing the following articles to resolve issues with iCal duplicates:
iCloud: Resolving duplicate calendars after setting up your calendar application for iCloud Calendar
http://support.apple.com/kb/TS4118
iCloud: Advanced Calendar and iCal troubleshooting
http://support.apple.com/kb/TS4337
Thank you for using Apple Support Communities.
Best,
Sheila M.

Why transferstructure creation in the same sequence of Flat file?

Hello Guru,
why transferstructure creation in the same sequence of Flat file?

Hi,
It is very simple see the following ex..
Transfer Structutre:
Material | Quantity
Flat File:
Quantity | Material
SO the mapping is like below:
Material-->Quantity
Quantity-->Material
So is it possible?. NO. SO you must follow the sequence.
Thanks
Reddy

XML Export Only Exports the Same Sequence

Similar Messages

Maybe you are looking for