XML fails to reconnect files with dual system recordings

I synchronised dual system recordings with 16 bit stereo recording on camera sound and high quality 24 bit mono on separate recorded sound. I deleted the camera sound and linked the tracks in the browser and all works well in FCP. The video is ProRes 422 HQ.
However after exporting an xml file for editing offline when I try to reconnect the media the xml file doesn't connect properly with the sound. All other files without separate sound reconnect perfectly. Is there a way around this? Also, my video and sound files have the same name. Would this contributor to the problem? I have a feeling the problem has something to do with the two differing sound sampling rates.

Similar Messages

Receiving multiple files with dual extension using file adapter

Hi,
The scenario where I am implementing requires multiple files of different names to be picked(ABC.txt) and dropped at destination(ABC.txt.pgp) up by my File Sender and Receiver adapters. Any idea on about how the configuration for receiving multiple files with dual extension for receiver adapter is to be done?
Note:- currently, The scenario is working fine without dual extension. i.e Its picking all files which starts with ABC and creating at destination as it is. even I configured as ABC.txt.pgp, but its not creating the second extension.
Thanks in Advance
Manmadha

Hi,
Try to concatenate '.pgp ' to the source file name to create the target file name for the receiver file adapter, by accessing the Adapter Specific Attributes using Java user defined function. This might work.
Reference links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm">SAP Help - Accessing Adapter Specific Attributes</a>
<a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - XI: The same filename from a sender to a receiver file adapter - SP14</a>
Regards,
S.Santhosh Kumar

How to convert IDoc-XML to native Idoc-File with in SAP XI/PI

Hello,
I have a problem to Create an native IDoc-Format for an File-Receiver.
The scenario:
I get an Idoc (ZMATMAS) from a SAP System to an MATMAS-exchange-scenario. One of the non-SAP-receiver-systems needs an other native IDoc-Format as File. So I have to map the ZMATMAS to the receiver Format and write this as File. The problem is, that this file contains the data as IDoc-XML and not as native IDoc-format.
Has anybody an idea for this problem?

U need to use sender idoc adapter and file receiver adapter.
U can do file content conversion at receiver end.
Content Conversion is basically to convert a text file that contains complex structures into an XML source format and vice versa. It is present only in the File Adapter because it is one of the message protocol which will convert the structure to a desired format.
There are many blogs for File Content Conversion. Some of them are listed hereunder:-
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
You may also check the FCC documentation for Sender and Receiver:-
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm

J2E License Key File With Changed System Number

Hello,
During the last weeks, there had been some trouble according to the sneak preview licensing web site to get a new license key for special SAP systems like J2E, NSP etc.
In the meantime, I used especially for my J2E instance via visual admin the button "install subsequent temp license" with success.
Returning anew to the web site today, I saw that now we are able again to renew the license key for our trial systems and ordered successfully license keys for J2E and NSP instance.
Because both systems have got new system numbers, I deleted the expired license key for NSP via saplicense -delete. Then I installed regularly the given new license key with success.
After starting the J2E instance, I tried to delete the existing active license (see above) via installed licenses getting a message which let me stop my try to delete the license because I feared for to get trouble with the system afterwards.
The exact text of the warning trying to delete the existing active license sounds:
DELETE J2EE-Engine_ADA License:
You are about to delete the license for the J2EE-Engine. This may lead to a shutdown of the running system. You will not be able to start the J2EE-Engine again without a valid license. Do you really want to proceed?
Trying to install the given license from file (via General), I got the informational message:
This system's system number is "xyz", but there is a license key for the system number "abc" in file path\J2E.txt. License key file path\J2E.txt doesn't contain any valid SAP license keys.
License key(s) not completely installed.
That was to be expected...
So my questions are:
1) What is to do when I want to implement the new given license key file which has another system number as the existing active one.
2) How often can I use the possibility to prolong my active license via button "Install subsequent temp. license" in future without falling in trouble?
Thank you for your answers.
Regards
Christian

Before deleting the J2EE engine license, check the "Installed Licenses" tab and verify that there is another J2EE-engine license with Validity "Valid" and within a satisfactory date range. Only under this situation will I feel comfortable with removing the additional/expired licenses.
Your original message is a bit confusing ... let me see if I got it correctly. You have been running your J2EE instance with temp licenses, because there was some issues w/ preview licensing on SAP's web site. Now that you have finally received your preview license, you wish to install it.
But since then, your system number has changed. Do you mean system ID? Since your example used a 3 character ('xyz' vs 'abc'). I think the SID is what you mean. Because changing system number will not require a new license, but changing the SID will.
So now you have the following.
1. J2EE running on temp license with SID 'xyz'
2. A new preview license for SID 'abc'
What you need to do is:
1. Request from SAP preview license for the SID that matches your system 'xyz'. OR, change the SID of your system from 'xyz' to 'abc', which is not recommended ...especially w/ AS-JAVA.
2. Install the new preview licenses.
3. Verify preview licenses are valid.
4. I don't believe you have to remove the temp licenses, it's overwritten when you install the permanent preview licenses.

Spotlight fails to find files with search items

I just did a Spotlight search on
Japanese English は
Spotlight found more than 3500 items, but the two sample Word files I looked at didn't have は in them.
This is really frustrating. Is there a way to ensure Spotlight only finds files with the input?

Spotlight is notorious for its weaknesses and erratic behavior. You might try reindexing your Spotlight. Open up Spotlight in Sys Prefs, go to Privacy and drag the HD Folder there. Leave it a minute then remove it by clicking on the minus at the bottom. This will force Spotlight to reindex the drive, which may take some time.
I mostly use EasyFind (free) instead of Spotlight.
http://www.devon-technologies.com/products/freeware/

Fail to download file with explorer 10 while explorer 9 and other browsers succeed to download the same file

I try to download file from management website of switch device. The file size is 11.66K.
The webserver is GoAhead, OS is windows7 and explorer version is 10 (it also happens with explorer 11). The server is using Transfer-Encoding: chunked.
After I download the file, I get pop-up message from the browser “Do you want to open or save running-config.txt from 1.1.1.11?”
If I press the save/open button I get message “running-config .txt couldn’t be downloaded”. If I press the retry button the file is downloaded successfully.
When I used meddler to debug the problem, it didn’t occur and the file was downloaded successfully.
I took capture of successful download (with meddler debugger) and another capture of download that raised “couldn’t be downloaded” message, but I didn’t see any difference between the requests and the responses. I also made sure the last chunk
“0” was not missing in the response and it wasn’t.
Please note, I also tried many suggestions given to other users that reported similar problem – restart explorer, remove add-ons, etc – nothing worked!
Please help.

Hi,
Did this issue occur on when you download file from other website?
This problem occurs if the Do not save encrypted pages to disk option in Internet Explorer is selected.
To fix this issue, try these methods:
Methods 1
On the Tools menu in Internet Explorer, click Internet Options, click the
Advanced tab, click to clear the check mark from the Do not save encrypted pages to disk check box in the
Security area, and then click OK. (This is the default Internet Explorer setting.)
Methods 2
1.Start Registry Editor.
2.For a per-user setting, locate the following registry key:
HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
For a per-computer setting, locate the following registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
3.On the Edit menu, click Add Value, and then add the following value:
"BypassSSLNoCacheCheck"=Dword:00000001
4.Exit Registry Editor
Karen Hu
TechNet Community Support

Generating XML File with Table data...

Hi All,
Bear with me, with my Oracle XML knowledge,,,
we have Oracle 8i ( Relaease 3) as our database, and managegement want to have XML type of Text file, with respect to data in the Customer Table. Expected XML tags would be the Column Names of the Table.
Table has three columns,, Name, Address, Telephone.
So desired XML file looks like below:
<Name>John Hunter</Name><Address> City Road, London</Address><Telephone>1223223</Telephone>
If I deceided to do this task using PL/SQL, how could I start it,,,, All comments are welcome, this is the first time that I am going to generate this type of file ,,,

Hi Chandana,
You can check out the DBMS_XMLQUERY package for this purpose. It provides XMLType functionality in Oracle 8i. You can access the documentation for the same at:
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/d_xmlque.htm#ARPLS066
If you happen to have access to Oracle 9i, then you can use XMLType Views provided with XML DB for your requirement.
Thanks
Shefali

Open file with system editor..

Hello,
I have a File (any kind of file) inside a java desktop application (swing) , and I want to open it with the appropriate system editor just like Eclipse does (right click on file | open with system editor).
Could you provide sample java code doing that ? (I know it's not easy and haven't found much googling).
Would that code be portable ?
thanks a lot !

Hai,
Yeah, that true Desktop is available on Java 1.6. These Desktop class is derived from jdic.jar, which u can find by googling. It contains APIs and examples for opening a file with the system editor. Dowload the jar file add to classpath use it, thats all. Refer to the examples.

Help File to Be Integrated with Sap System

Dear sir
Please get me how to integrate the help file[ERP 2004 help ] with SAP System. I M Not able to get the help from the system the error it throw is no document available i want the help of .chm file so is there any way to integrate that file with SAP system so that we can cget help from sap system itself
I m Using ECC 5.0
Regards
Ashish

you can place (install) the help files on any machine you want, at least it has a web server on it.
you can then specify the "Server Name" and "Path" in SR13 to this server (e.g. Server Name = mywebserver.mycompany.com:1080, Path = helpdata)
the clients open the associated program to the extension of the files (in case of .chm and .html it would be most likely the Internet Explorer)
kr, achim
check this link: https://websmp106.sap-ag.de/~sapdownload/011000358700002110712004E/SAPLibInstGuide_640_EN.pdf
Message was edited by: Achim Hauck

Streaming XML to a log file

Hello, I am investigating streaming XML into a log file for my system so that I can tag various elements that will allow for efficient reporting on errors, user events, login states etc.....
As yet I have found it very unclear as to whether I can do this. I do not wish to build up a DOM or hold any information in memory as I want it written to the file straight away, also is it possible to read it at the same time as it is being written?
Can anyone give me a bit of guidance or direction to if it is possible to stream xml in this way from a singleton object in my application on the appserver? I am looking at either JDOM or JAXB, is this wise?
Any help would be invaluable...
cheers
Richard

akpattuka, having tried your run time parameters with plugin 1.4.2, i can tell you that they do not work here either. I have even tried setting -Djavaplugin.trace.option=ext as suggested by online help (not with numbers). Nothing. What does work for me is the following. While running your applet open the console window. Hit 'o' to enable logging, hit '5' to set the trace level. Hit the refresh button inside your browser. This will create a trace file and a log file.
HTH, Markus

Problem in loading an external file with unicode name

Hi,
I am working on a project which involves loading of an
external file with unicode name for ex:
"插入音乐.mp3
,插入音乐.jpg". These unicode files are
loaded successfully when I play/publish the movie with flash player
alone.
But when the movie is embedded in to HTML file, it is failing
to load files with unicode name. this works fine with English name.
is it a bug? if not pls help.. on this issue
Thx

what is your code? so we can get clear picture.

Failed to load XML file with Content ID 'XYZ'

Hello,
We are using UCM Version:11.1.1.8.1DEV-2014-01-06 04:18:30Z-r114490 (Build:7.3.5.185) with site studio for creating templates and web sites.
While switching to contribution mode, we find 'Failed to load XML file with Content ID 'XYZ' error.[Here XYZ is the local checkin content]
In region we are using dynamic converter to convert the style of native document here below are region and its element details.
<region id="region3" name="Add_Content_Here" flags="1111111100100" metadata="xIdcProfile%3AisHidden%3Dtrue%26xTemplateType%3AisHidden%3Dtrue%26xShowInStaff%3AisHidden%3Dtrue%26xShowInVisitors%3AisHidden%3Dtrue%26xShowInFaculty%3AisHidden%3Dtrue%26xDiscussionCount%3AisHidden%3Dtrue%26xDiscussionType%3AisHidden%3Dtrue" dccommand="ssIncDynamicConversionByRule(SS_DATAFILE, 'Colleges_Template_Rule')">
      
      <element id="region3_element1" name="Editor" label="Editor" type="1" flags="111111111111111111111100000111100000000000001111001110111010001111101000000000000000000000000000">
        
        <linktoregioncontent createnewxml="true" createnewnative="false" choosemanaged="true" chooselocal="false" choosenone="false">
          <choosemanagedquerytext corecontentonly="FALSE">
            <![CDATA[xWebsiteObjectType <Matches> `Data File` <OR> xWebsiteObjectType <Matches> `Native Document`]]>
          </choosemanagedquerytext>
        </linktoregioncontent>
      </element>
      <switchregioncontent createnewxml="true" createnewnative="true" choosemanaged="true" chooselocal="false" choosenone="false">
        <createnewnativedoctypes >
          <![CDATA[.doc,.docx,.txt,.rtf]]>
        </createnewnativedoctypes>
        <choosemanagedquerytext corecontentonly="FALSE">
          <![CDATA[xWebsiteObjectType <Matches> `Data File` <OR> xWebsiteObjectType <Matches> `Native Document`]]>
        </choosemanagedquerytext>
        <defaultmetadata >
          <![CDATA[xIdcProfile%3AisHidden%3Dtrue%26xTemplateType%3AisHidden%3Dtrue%26xCollegesList%3AisHidden%3Dtrue%26xShowInStudents%3AisHidden%3Dtrue%26xShowInStaff%3AisHidden%3Dtrue%26xShowInVisitors%3AisHidden%3Dtrue%26xShowInFaculty%3AisHidden%3Dtrue%26xArticleSection%3AisHidden%3Dtrue%26xDiscussionCount%3AisHidden%3Dtrue%26xDiscussionType%3AisHidden%3Dtrue%26dpTriggerValue%3DCSE]]>
        </defaultmetadata>
      </switchregioncontent>
    </region>



Regardrs,
Syed

Hi Syed ,
Add the following trace sections :
requestaudit,sitestudio*,system + Full verbose tracing
Clear the server output .
Replicate the same steps and once error shows up , refresh server output and copy the logs to a text file and upload here .
Thanks,
Srinath

Remote Resources: "A problem with the system proxy caused the connection to fail: End of file"

Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------

My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be.

Problem with base64 encoding an xml file with accented characters

Oracle 10.2.0.1.0 Enterprise Edition running under windows 2003 server
DB Characterset UTF-8
I have a routine which takes an xml file and base64 encodes it, and the base64encoded text is stored in a clob column of a table.
The xml file is stored in UTF-8 format.
The routine works correctly, except when there are accented characters.
I am using dbms_lob.loadclobfrom file to load the file.
DBMS_LOB.OPEN(src_clob, DBMS_LOB.LOB_READONLY);
    DBMS_LOB.LoadCLOBFromFile(
          DEST_LOB     => dest_clob
        , SRC_BFILE    => src_clob
        , AMOUNT       => DBMS_LOB.GETLENGTH(src_clob)
        , DEST_OFFSET => dst_offset
        , SRC_OFFSET   => src_offset
        , BFILE_CSID   =>dbms_lob.default_csid
        , LANG_CONTEXT => lang_ctx
        , WARNING      => warning
    DBMS_LOB.CLOSE(src_clob);base 64 encoded xml with accented character -- incorrect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 64 encoded xml without accented character -- correct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the xml file in use is
<?xml version="1.0" encoding="UTF-8"?>
<gp:ApplicationProfile xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://namespaces.globalplatform.org/systems-profiles/1.1.0 http://namespaces.globalplatform.org/systems-profiles/1.1.0/GP.systems.profiles.1.1.0.ApplicationProfile.xsd"
    xmlns:gp="http://namespaces.globalplatform.org/systems-profiles/1.1.0"
    UniqueID="ME" ProfileVersion="1.1.0" ErrataVersion="0">
    <gp:Description>Forum Test</gp:Description>
    <gp:DataElement Name="áccent" External="true" Type="ByteString" Encoding="HEX" FixedLength="false" Length="16" ReadWrite="true" Update="true" Optional="true" />
</gp:ApplicationProfile>The file is being loaded from a windows xp professional 32 bit system.
If I just convert the xml text of the file using
select utl_raw.cast_to_varchar2(
utl_encode.base64_encode(
utl_raw.cast_to_raw(
'<?xml version="1.0" encoding="UTF-8"?>
<gp:ApplicationProfile xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://namespaces.globalplatform.org/systems-profiles/1.1.0 http://namespaces.globalplatform.org/systems-profiles/1.1.0/GP.systems.profiles.1.1.0.ApplicationProfile.xsd"
    xmlns:gp="http://namespaces.globalplatform.org/systems-profiles/1.1.0"
    UniqueID="ME" ProfileVersion="1.1.0" ErrataVersion="0">
    <gp:Description>Forum Test</gp:Description>
    <gp:DataElement Name="áccent" External="true" Type="ByteString" Encoding="HEX" FixedLength="false" Length="16" ReadWrite="true" Update="true" Optional="true" />
</gp:applicationprofile>'
))) from dual;I get the following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 by: Keith Jamieson on Jul 13, 2012 9:59 AM
added code tag for last base64 encoded object

Not sure if utl_i18n is already there in version prior to 11.2.0.2.
But on above mentioned version I can do the simplified method
SQL> SELECT utl_i18n.raw_to_char (
         utl_encode.base64_encode (
           xmltype (
             '<?xml version="1.0" encoding="UTF-8"?>
<gp:ApplicationProfile xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://namespaces.globalplatform.org/systems-profiles/1.1.0 http://namespaces.globalplatform.org/systems-profiles/1.1.0/GP.systems.profiles.1.1.0.ApplicationProfile.xsd"
    xmlns:gp="http://namespaces.globalplatform.org/systems-profiles/1.1.0"
    UniqueID="ME" ProfileVersion="1.1.0" ErrataVersion="0">
    <gp:Description>Forum Test</gp:Description>
    <gp:DataElement Name="áccent" External="true" Type="ByteString" Encoding="HEX" FixedLength="false" Length="16" ReadWrite="true" Update="true" Optional="true" />
</gp:ApplicationProfile>').getblobval (
             NLS_CHARSET_ID ('utf8'))),
         'utf8')
         x
FROM DUAL
X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1 row selected.which encodes and decodes properly on my system even with accented characters.

Problems with reading XML files with ISO-8859-1 encoding

Hi!
I try to read a RSS file. The script below works with XML files with UTF-8 encoding but not ISO-8859-1. How to fix so it work with booth?
Here's the code:
import java.io.File;
import javax.xml.parsers.*;
import org.w3c.dom.*;
import java.net.*;
* @author gustav
public class RSSDocument {
    /** Creates a new instance of RSSDocument */
    public RSSDocument(String inurl) {
        String url = new String(inurl);
        try{
            DocumentBuilder builder = DocumentBuilderFactory.newInstance().newDocumentBuilder();
            Document doc = builder.parse(url);
            NodeList nodes = doc.getElementsByTagName("item");
            for (int i = 0; i < nodes.getLength(); i++) {
                Element element = (Element) nodes.item(i);
                NodeList title = element.getElementsByTagName("title");
                Element line = (Element) title.item(0);
                System.out.println("Title: " + getCharacterDataFromElement(line));
                NodeList des = element.getElementsByTagName("description");
                line = (Element) des.item(0);
                System.out.println("Des: " + getCharacterDataFromElement(line));
        } catch (Exception e) {
            e.printStackTrace();
    public String getCharacterDataFromElement(Element e) {
        Node child = e.getFirstChild();
        if (child instanceof CharacterData) {
            CharacterData cd = (CharacterData) child;
            return cd.getData();
        return "?";
}And here's the error message:
org.xml.sax.SAXParseException: Teckenkonverteringsfel: "Malformed UTF-8 char -- is an XML encoding declaration missing?" (radnumret kan vara f�r l�gt).
    at org.apache.crimson.parser.InputEntity.fatal(InputEntity.java:1100)
    at org.apache.crimson.parser.InputEntity.fillbuf(InputEntity.java:1072)
    at org.apache.crimson.parser.InputEntity.isXmlDeclOrTextDeclPrefix(InputEntity.java:914)
    at org.apache.crimson.parser.Parser2.maybeXmlDecl(Parser2.java:1183)
    at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:653)
    at org.apache.crimson.parser.Parser2.parse(Parser2.java:337)
    at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:448)
    at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:185)
    at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
    at getrss.RSSDocument.<init>(RSSDocument.java:25)
    at getrss.Main.main(Main.java:25)

I read files from the web, but there is a XML tag
with the encoding attribute in the RSS file.If you are quite sure that you have an encoding attribute set to ISO-8859-1 then I expect that your RSS file has non-ISO-8859-1 character though I thought all bytes -128 to 127 were valid ISO-8859-1 characters!
Many years ago I had a problem with an XML file with invalid characters. I wrote a simple filter (using FilterInputStream) that made sure that all the byes it processed were ASCII. My problem turned out to be characters with value zero which the Microsoft XML parser failed to process. It put the parser in an infinite loop!
In the filter, as each byte is read you could write out the Hex value. That way you should be able to find the offending character(s).

XML fails to reconnect files with dual system recordings

Similar Messages

Maybe you are looking for