XML File not fully downloaded Fully from Application Server.

Hi,
I am downloading an XML file from Application server. It's only downloading partially. Below is the Declaration for target Internal table.
DATA: BEGIN OF infile OCCURS 0,
        line(65535) TYPE c,
      END OF infile.
SAP does not allow more than 65535 characters for a data type of type C. So its only downloading till that length.
If I am using type as STRING, its downloading in different format. Also its not allowing me to put these data into internal table.
Below is my code for downloading.
OPEN DATASET p_unix IN TEXT MODE MESSAGE msg.
    IF sy-subrc <> 0.
      MESSAGE i001(38) WITH 'Error on Open of File: ' msg.
    ELSE.
      WHILE sy-subrc = 0.
        READ DATASET p_unix INTO infile.
        CHECK sy-subrc = 0.
        APPEND infile.
        ENDWHILE.
      CLOSE DATASET p_unix.
Is there any way to convert string into XML format & put it in the internal table?
Kindly suggest me any other way, so I can download the entire set of file into the internal table.
Thanks,
Debi.

Hi ,
Try downloading the file from the application server using the TCode CG3Y on your local machine.
Then use the FM GUI_UPLOAD to upload the contents in an internal table.
Thanks,
Manish

Similar Messages

  • How to download pdf from application server

    hi all,
    anybody has code to download pdf from application server to presentation server.
    right now i get the pdf file on to the desktop but i get error on opening.
    gui_download gives error if i use xstring.
    pl advice.
    thanks.
    sap fan.

    Hi,
    use the below code to download file from app server to presentation server
    PARAMETERS: S_file TYPE SAPB-SAPPFAD
    default '\folder1\abc,pdf'.
    PARAMETERS: t_lfile TYPE SAPB-SAPPFAD
    default 'c:\temp\xyx.pdf'.
    START-OF-SELECTION.
      CALL FUNCTION 'ARCHIVFILE_SERVER_TO_CLIENT'
        EXPORTING
          path             = source_file
         TARGETPATH        = target_lfile
    EXCEPTIONS
       ERROR_FILE       = 1
       OTHERS           = 2
      IF sy-subrc eq  0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.

  • Dump while downloading data from Application Server File in 4.6 system

    Hi,
    When we are trying to upload data from Application Server to internal table using dataset statements, it is resulting in a dump. System we are using is 4.6c.
    When we faced similar kind of issue in ECC version, we have used the statement, Ignoring Conversion Errors.
    Please let me know how to handle this situation in 4.6 System.
    Thanks for your inputs.
    Regards,
    Phani

    Hi All,
    I am sorry. My question was wrong. It should be while uploading data from internal table to application server, if there are any special characters, it is going to dump.
    I will let you know the dump details and code at the earliesst.
    Sorry and Thanks again for your prompt response.
    Regards,
    Phani.

  • Problem while downloading data from Application server.

    Hi
    I have create a file on the application server.
    When i tried to download the file from application server into Excel file , all the fields in the file appear in the same column.
    How can place the fields separately in different columns in the Excel.
    Thanks
    Subha
    Edited by: subhacp on Sep 5, 2011 8:32 AM

    Hi,
    Try to use below function module where you need not to do anything new, just give path of the directory where you want to store on your workstation in the parameter  I_FILE_FRONT_END  and give path of your application server from where you want to pick file which is in .XLS format in the FM parameter I_FILE_APPL  .
    It will simply copy the file from Apllication server to your workstation in the same format and with the same characters.
    CALL FUNCTION 'C13Z_FILE_DOWNLOAD_BINARY'
      EXPORTING
        I_FILE_FRONT_END          = pr_down
        I_FILE_APPL               = l_w_file
        I_FILE_OVERWRITE          = 'X'
    * IMPORTING
    *   E_FLG_OPEN_ERROR          =
    *   E_OS_MESSAGE              =
    EXCEPTIONS
       FE_FILE_OPEN_ERROR        = 1
       FE_FILE_EXISTS            = 2
       FE_FILE_WRITE_ERROR       = 3
       AP_NO_AUTHORITY           = 4
       AP_FILE_OPEN_ERROR        = 5
       AP_FILE_EMPTY             = 6
       OTHERS                    = 7
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Hope it will solve your query.

  • "Open file..." dialog from Application Server (Unix)

    Hi all you experts.
    I have a simple ABAP program that reads input files from Application Server (Unix), at this moment the users have to enter manually the name of the file(s) in a parameter text field. I would like to add value to this program by helping the user select the file using an "Open file..." dialog or something similar that enable them to chose the file on behalf of writing the complete name (including the path).
    Do you have any idea about how to implement it?
    Many thanks in advance.

    Hi,
    Try function module F4_DXFILENAME_TOPRECURSION or F4_FILENAME_SERVER (for a specific directory) within the at value-request event for the filename.
    Cheers,
    Darren

  • XML file not loading in FF from server

    I've created a web page that loads an external XML file and
    then uses javascript code to parse the file for requested
    information. I know it's not the best way to do this, but I'm
    trying to get this working before I move on to "better" methods.
    When I run the page using the "Preview/Debug in browser"
    funtionality of DW everything works great both in IE and FF. But
    when I load the page to the server and then load the page in a
    browser, it works in IE but not in FF. It looks as though FF is
    just not loading the XML file. I can't figure out why the page
    would work if launched from DW, but not work if the page is loaded
    on the server and then run from there, and only in FF.
    The code I'm using to load the XML file is supposed to be
    cross-browser compatible. I've seen many versions like from various
    sources, so it should be OK. I'm pretty new to all of this so I'm
    hoping that I'm just missing something simple. Does anyone have any
    idea why this is behaving this way?
    Thanks for any help.

    so, in frame 1 of your fla before you execute that cross-domain load method, use:
    System.security.loadPolicyFile("http:www.yourcrossdomain.com/subdirectoriesIfNeeded/crossd omain2.xml");
    where the following (crossdomain.xml) is in www.yourcrossdomain.com's root (IF you want to allow allow subdirectory policy files):
    <!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
    <cross-domain-policy>
    <site-control permitted-cross-domain-policies="all"/>
    </cross-domain-policy>
    and in the subdirectory (and its descendents) that you want to allow access put crossdomain2.xml:
    <?xml version="1.0"?>
    <!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
    <cross-domain-policy>
      <allow-access-from domain="www.thedomainthatstryingtoloadcrossdomaindata.com" />
    </cross-domain-policy>

  • Problem in downloading data from application server

    Hi,
    I tried the following code for downloading data to PC in background:
    PARAMETERS: p_file LIKE rlgrap-filename OBLIGATORY.
    OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    IF sy-subrc = 0.
        LOOP AT itab INTO istab.
          TRANSFER istab TO p_file.
        ENDLOOP.
    ENDIF.
    Here, the contents are not getting transferred to the p_file. I give the path of the file while executing the program.
    First of all, the file is not getting created in PC. And the statement 'OPEN DATASET p_file FOR INPUT IN TEXT MODE ENCODING DEFAULT'. is working but unable to read after that using READ DATASET statement.

    HI,
    You can use this code .............
    OPEN DATASET gv_dataset for input in text mode encoding default.
      IF sy-subrc = 0.
        DO.
          clear gv_rec.
          READ DATASET gv_dataset INTO gv_rec.
          if sy-subrc <> 0.
            append gv_rec to gt_raw.
            exit.
          endif.
          append gv_rec to gt_raw.
        ENDDO.
        CLOSE DATASET gv_dataset.
      ELSE.
        gv_retcode = 1.
      ENDIF.
    Regards,
    jayan

  • TO READ FILES IN A PARTICULAR DIRECTORY FROM APPLICATION SERVER

    Hi all,
    Is there any function module which gives the list of files in a specific directory ??
    for eg ;i want to fetch all files in a particular directory say */interf/sy-mandt/reports....*
    I need a function module which will give all filenames in an internal table ,if i give the directory name as input.
    Thanks in advance,
    Aakash.
    Edited by: Aakash Neelaperumal on Apr 25, 2008 11:06 PM

    Hi,
    You can use WS_FILENAME_GET but understand it is obsolete. Search for a FM in function group SFES. I saw quite a few and one of them should meet your requirement.
    Cheers !

  • Downloading file from application server in Binary mode

    Hi,
    I am trying to read an application server file using open dataset in Binary Mode..
    While downloading using gui_download method the file is getting truncated because of its size.
    My questions are,
           How to increase the size of the internal table dynamically. Already tried using STRING type but it is not accepting.
           If I use the CHAR type with maximum length 65535 and if the length of the file is less than that then in the remaining spaces box like symbols are printed .
    How can I achieve it.
    Thanks & Regards,
    NJ

    TYPES: BEGIN OF type_download,
               data1 TYPE zchar20000,
               data2 TYPE zchar20000,
               data3 TYPE char3000,
               data4 TYPE char2000,
             END OF type_download.
      DATA: lt_download TYPE STANDARD TABLE OF type_download,
            lx_download TYPE string,
            lv_filename TYPE string.
    Read data from application server to internal table
      OPEN DATASET p_p_ftappl FOR INPUT IN BINARY MODE.
      IF sy-subrc = 0.
    Read file
        DO.
          CLEAR lx_download.
          READ DATASET p_p_ftappl INTO lx_download.
          IF sy-subrc <> 0.
            EXIT.
          ENDIF.
          APPEND lx_download TO lt_download.
        ENDDO.
    Download data to presentation server from internal table
        lv_filename = p_p_ftfron.
    Download data from application server to PC
        CALL METHOD cl_gui_frontend_services=>gui_download
          EXPORTING
       bin_filesize              =
            filename                  = lv_filename
            filetype                  = c_bin
       append                    = space
          write_field_separator     = space
       header                    = '00'
       trunc_trailing_blanks     = 'X' "space "commented
       trunc_trailing_blanks_eol = 'X' "added
    IMPORTING
       filelength                =
          CHANGING
            data_tab                  = lt_download.
    *Exceptions deleted            .
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                     WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    Close file
        CLOSE DATASET p_p_ftappl.
    Edited by: NewJoinee123 on Mar 25, 2010 8:45 AM

  • Unable to read file from application server

    Hi guys,
    I am reading file(could be any extension) from application server,but some time i am successfuly able to read file and sometime unable to read,why its happening .
    my code is here
    OPEN DATASET E_FILE FOR INPUT IN  BINARY MODE . "
      IF SY-SUBRC = 0.
        DO .
          READ DATASET E_FILE INTO GS_PDF_TAB.
          IF SY-SUBRC = 0.
            APPEND GS_PDF_TAB TO GT_PDF_TAB.
          ELSE.
            EXIT.
          ENDIF.
        ENDDO.
        CLOSE DATASET E_FILE.
      ENDIF.
    Thanks
    Ankur Sharma

    Hi,
    What actually happens?  Do you get a short dump?  Do you get a return code ne 0?  Does it run fine but you get no data in your table?
    We aren't mind-readers and can't help much without more information.
    Try using transaction AL11 to see if you access the files you are trying to open.
    Gareth.

  • Class to Get File List from Application Server

    Hi all
    I've to obtain the file list of a directory from application server, I can use a FM too but It's possible the lenght of file name is upper then 40 characters so I can't use FM EPS_GET_DIRECTORY_LISTING.
    Thanks
    Edited by: Aristoteles92 on Apr 20, 2010 3:27 PM

    Try using the function  RZL_READ_DIR_LOCAL.  Here is an example program using this function.
    data: begin of itab occurs 0,
          rec(1000) type c,
          end of itab.
    data: wa(1000) type c.
    data: p_file type localfile.
    data: ifile type table of  salfldir with header line.
    parameters: p_path type salfile-longname
                        default '/usr/sap/TST/DVEBMGS01/data/'.
    call function 'RZL_READ_DIR_LOCAL'
         exporting
              name           = p_path
         tables
              file_tbl       = ifile
         exceptions
              argument_error = 1
              not_found      = 2
              others         = 3.
    loop at ifile.
      format hotspot on.
      write:/ ifile-name.
      hide ifile-name.
      format hotspot off.
    endloop.
    at line-selection.
      concatenate p_path ifile-name into p_file.
      clear itab.  refresh itab.
      open dataset p_file for input in text mode.
      if sy-subrc = 0.
        do.
          read dataset p_file into wa.
          if sy-subrc <> 0.
            exit.
          endif.
          itab-rec = wa.
          append itab.
        enddo.
      endif.
      close dataset p_file.
      loop at itab.
        write:/ itab.
      endloop.
    Regards,
    Rich Heilman

  • Process for Flat file delta load from Application server to transactional??

    I want to do a flat file extraction in delta loads from application server and that should be loaded into a transactional cubes scheduling a process chain.
    Can any one help with ABAP code and step by step process for this?
    Thank you
    Devi

    Hi Devi,
    As per your explaination, you want to load a list of files from application server using process chain.
    You can do this with below steps.
    1) Create a Event and call event to run Process chain multiple times.
    2) Put all filenames in a file say, source-File
    3) Write a rooting to read filename from Source-File and trigger InfoPackage
    4) At the end of the process chain create new customized program which will delete first line from Source-File so that it will take next file in next run as well as delete currently loaded file. Once this is done trigger event again to start process chain again.
    Regards,
    Ganesh

  • Pages will not open a downloaded .pages document from iCloud because index.xml file not found?

    New to using iCloud.  I created a large pages document on Mac Air and saved it to my iCloud account.  Found it at home on desktop Mac and downloaded it.  No problem.  However, it will not open due to the index.xml file not being found.  What should I do to open this document?  I've tried several things and no luck yet.  Thanks for any tips!  :-)

    Options posted here: The required index.xml file is missing.
    William Farrar posted:
    Try this. It worked for me:
    1. Single click on the document. This will "highlight" the document icon, but not invoke the error message.
    2. Click on "File" in the menu.
    3. Scroll down to "Open With".
    4. One of my choices in the "Open With" selection is Pages (default) (5.0.1)
    5. Click on that choice and the document should open.
    In my "Open WIth" selection there is also a Pages (4.0.4), but that didn't work for me.
    Now, here is a caveat. If before you open your document you instead first click on an open Internet window, then the "Open With" selection disappears from the File menu. In that case just single click again on the document icon again and the "Open With" selection returns.
    fruhulda posted:
    Try this:
      1. Make a duplicate of the file (cmd D), just to be safe
      2. Select .pages on the copy and change to .zip
      3. When the System asks if you really want to do this, click Use .zip
      4. Double click the new .zip file
      5. It will now appear as a folder with no extension
      6. Append .pages to the end of the folder name
      7. Again click on Use .pages
      8. Double click on this file to open it in Pages.
    What you have done is extracted all the Pages resources from the .pages "package" and reconstructed it.
    or
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=308

  • Reading XML File from application server

    Hi experts,
    My aim is to read a XML file from application server and extract the relevant data from it and process further.
    When I am trying to read a XML file from application server it is reading success fully but the problem is that its not reading the last root structure of XML file why is so happening can any body help me?
    I am using the following code:
    TYPES: BEGIN OF xml_line,
    text(256) type x,
    END OF xml_line.
    DATA: e_file LIKE rlgrap-filename VALUE  'applcatin server path'
    OPEN DATASET e_file FOR INPUT IN BINARY MODE.
    IF sy-subrc EQ 0.
      DO.
        READ DATASET e_file INTO wa_item1-text.
        IF sy-subrc EQ 0.
          APPEND wa_item1 TO gt_item1 .
          CLEAR wa_item1.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
    ENDIF.
    CLOSE DATASET e_file.
    after this i am passing this internal table to "cl_ixml" class to extract the data
    but it returning the itab with required value except the last record.
    The stream reading the file it self is i thought in complete thats why it is not converting the all values.
    Please  help me...
    Thanks a ton in advance.

    Hi,
    1 Copy Report BCCIIXMLT1
    2 (you can change the way of filling internal table xml_table if necessary)
    3 you don't need the part between
    *-- render the DOM back into an output stream/internal table
    and
    *-- print the whole DOM tree as a list...
    Comment it out or simply delete it
    4 Rename form print_node to your liking e.g. process_node
    5 In your new form you need three extra variables:
    data: attribs type ref to IF_IXML_NAMED_NODE_MAP,
          attrib_node type ref to IF_IXML_NODE,
          attrib_value type string.
    6 After the lines:
    when if_ixml_node=>co_node_element.
      string = pNode->get_name( ).
    Insert:
    attribs = pNode->get_attributes( ).
    clear attrib_value.
    case string.
      when ''. "put your XML tag name here
        attrib_node = attribs->get_named_item(name = '' ). "put your XML attribute name here
        attrib_value = attrib_node->get_value( ).
    You can also refer link,
    /people/r.eijpe/blog/2005/11/21/xml-dom-processing-in-abap-part-ii--convert-an-xml-file-into-an-abap-table-using-sap-dom-approach
    thanks & regards
    shreemohan

  • Error in PDF Conversion while downloading file from application server

    Hi,
    I am facing a problem in which i have to download file from application server which is a PDF file (output of SAP Script). I am downloading this file using following code in BSP technology:
    * event handler for data retrieval
    EMPCD = REQUEST->GET_FORM_FIELD( 'emp' ).
    MONTH = REQUEST->GET_FORM_FIELD( 'mn' ).
    YEAR  = REQUEST->GET_FORM_FIELD( 'yr' ).
    W_IND = 'N' .
    DATA : wa_zform16 type  zform16.
    DATA : file_path type string.
    DATA : l_pdf_len type string.
    DATA STR TYPE STRING.
    DATA: OUTPUT    TYPE STRING ,
          L_XSTRING TYPE XSTRING ,
          APP_TYPE  TYPE STRING.
    DATA: PDF_TABLE TYPE  RCL_BAG_TLINE.
    DATA PHY_NAME_OUT     TYPE SAPB-SAPPFAD.
    concatenate '/usr/sap/put/form16/' EMPCD '_' YEAR '.PDF'  into file_path
    *PHY_NAME_OUT = '/usr/sap/put/form16/01000200_2007.PDF'.
    PHY_NAME_OUT = file_path.
    OPEN DATASET PHY_NAME_OUT FOR INPUT IN TEXT MODE ENCODING default.
    IF SY-SUBRC IS INITIAL.
      DO.
        READ DATASET PHY_NAME_OUT INTO STR.
        IF SY-SUBRC IS INITIAL.
          CONCATENATE
              OUTPUT
              STR
              CL_ABAP_CHAR_UTILITIES=>CR_LF
          INTO OUTPUT.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
      APP_TYPE = 'APPLICATION/PDF'.
      CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
        EXPORTING
          TEXT     = OUTPUT
                MIMETYPE = 'APPLICATION/PDF'
    *            MIMETYPE = 'APPLICATION/PDF;charset=utf-16le'
        IMPORTING
          BUFFER   = L_XSTRING.
      CALL METHOD CL_BSP_UTILITY=>DOWNLOAD
        EXPORTING
          OBJECT_S            = L_XSTRING
          CONTENT_TYPE        = APP_TYPE
          CONTENT_DISPOSITION = 'attachment;filename=webforms.pdf'
          RESPONSE            = _M_RESPONSE
          NAVIGATION          = NAVIGATION.
    Result of this code is : there is a pop up asking to open or save pdf format and process is complete, but i have problem in downloaded file.
    At the time of creation i have put BMP image for signature in PDF file and it is working fine but when i upload that file in Application server and then download it with above used code it save the PDF file but when i open that file so whereever i have used signature that page gives error and could not display that scanned signature.
    Can anyone please help me in this regard.
    or is there any possibility from which i can download that file just like File transfer from BSP.
    Keep in mind that i am using BSP technology so all GUI based function module to download file are not working.
    waiting for your reply.....
    Regards,
    Gagan

    Hi Raja,
    I have standard sap form for TDS Certificate on which i have include an BMP image for digital signature and download that script into pdf format.While i download that PDF looks ok but it is not working in BSP.
    Regards,
    Gagan

Maybe you are looking for