XML files and assemblies in bin directory
In VS 2010 the bin directory was very simple and straight forward. Now in VS 2012 Web apps the bin directory is filled with a bunch of System and Microsoft assemblies a bunch of folders named with the two letter country code use in URLs and a bunch
of xml files with the name of the System and Microsoft assemblies. I can guess the reason for the assemblies is so that the web app can be deployed to servers without the .Net Framework installed or to which the installed app does not have access to
the GAC. But what is the reason for all of the xml files. Then to add insult to injury, even though the project is created with all of these xml files listed in the bin folder, each and everyone has a yellow triangle with an exclamation mark
beside which I assume means that the file does not exist physically in the folder. When you go to windows explorer sure enough they aren't there.
What is the purpose of all of these xml files, and if they are needed then why aren't they added to the bin folder? I can not publish my project because the files do not exist. Can I delete these files with impunity?
Edward R. Joell MCSD MCDBA
How can you possibly think that this is an ASP.Net issue?
Visual Studio 2012 created the listing for those files and foreign folders in the bin, NOT Asp.Net.
Visaul Studio 2012 listed those files in the bin and failed to create the files physically NOT Asp.Net.
Visual Studio 2010 does NOT put those extraneous files in the exact same kind of Asp.Net project, but Visual Studio 2012 does.
This is behavior that only occurs with the new version of Visual Studio. If it were an Asp.Net issue then Visual Studio 2010 would exhibit the same behavior.
Visual Studio is the mechanism that carries out publishing the project. This is a function of the IDE. It is Visual Studio that is reporting it can not complete the task because it cannot find the files it did not create.
This is new behavior from Visual Studio 2012, which makes it impossible to work.
In addition, Visual Studio 2012 keeps having the Output and Errors window show up on the level where the code windows are suppose to open and the code windows open where the output window is supposed to open.
This behavior has NOTHING to do with Asp.Net or it would be present in ALL versions of Visual Studio, but it is only happening in Visual Studio 2012.
Are the moderators of this forum trying to avoid the hard questions, or are they trying to hide flaws in Visual Studio?
Edward R. Joell MCSD MCDBA
Similar Messages
-
Reading A xml file and sending that XML Data as input to a Service
Hi All,
I have a requirement to read(I am using File adapter to read) a xml file and map the data in that xml to a service(schema) input variable.
Example of xml file that I have to read and the content of that xml file like below:
<StudentList>
<student>
<Name> ravi</Name>
<branch>EEE</branch>
<fathername> raghu</fathername>
</student>
<student>
<Name> raju</Name>
<branch>ECE</branch>
<fathername> ravi</fathername>
</student>
<StudentList>
I have to pass the data(ravi,EEE,raghu etc) to a service input varible. That invoked Service input variable(schema) contains the schema similar to above schema.
My flow is like below:
ReadFile file adapter -------------------> BPEL process -----> Target Service.I am using transform activity in BPEL process to map the data from xml file to Service.
I am using above xml file as sample in Native Data format(to create XSD schema file).
After I built the process,I checked file adapter polls the data and receive the file(I am getting View xml document in EM console flow).
But transform activity does not have anything and it is not mapping the data.I am getting blank data in the transform activity with only element names like below
---------------------------------------------------------------------------EM console Audit trail (I am giving this because u can clearly understand what is happening-----------------------------------------------------
-ReceiveFile
-some datedetails received file
View XML document (This xml contains data and structure like above xml )
- transformData:
<payload>
<InvokeService_inputvariable>
<part name="body">
<StudentList>
<student>
<name/>
<branch/>
<fathername/>
</student>
</StudentList>
</part>
</InvokeService_inputvariable>
'Why I am getting like this".Is there any problem with native data format configuration.?
Please help me out regarding this issue as I am running out my time.Hi syam,
Thank you very much for your replies so far so that I have some progrees in my task.
As you told I could have put default directory in composite.xml,but what happenes is the everyday new final subdirectory gets created in the 'soafolder' folder.What I mean is in the c:/soafolder/1234_xmlfiles folder, the '1234_xmlfiles' is not manually created one.It is created automatically by executing some jar.
Basically we can't know the sub folder name until it is created by jar with its own logic. whereas main folder is same(soafolder) ever.
I will give you example with our folder name so that it would be more convenient for us to understand.
1) yesterday's the folder structure : 'c:/soafolder/130731_LS' .The '130731_LS' folder is created automatically by executing some jar file(it has its own logic to control and create the subdirectories which is not in our control).
2) Today's folder structure : 'c:/soafolder/130804_LS. The folder is created automatically(everytime the number part(130731,130804).I think that number is indicating 2013 july 31 st like that.I have to enquire about this)is changing) at a particular time and xml files will be loaded in the folder.
Our challenge : It is not that we can put the default or further path in composite.xml and poll the file adapter.Not everytime we have to change the path in composite.xml.The process should know the folder path (I don't know whether it is possible or not.) and everyday and file adapter poll the files in that created subfolders.
I hope you can understand my requirement .Please help me out in this regard. -
I'm using the flvplayback component that came with Flash CS4.
To use with an xml file, it indicates that all I need to do is to enter the name of the file in the contentPath, which I have done (videostest.xml)
Both Flash file, html file and xml file are in the same directory, so the path name should be fine.
When I go to view the file nothing displays. If I enter the name of the actual FLV file it works fine, but I need to use an xml file.
XML file text follows:
<?xml version="1.0" encoding="utf-8"?>
<FlvPlayer>
<item>
<file>WLA_Now_Fall_2008_Introduction.flv</file>
</item>
</FlvPlayer>
I gave the component on the stage the instance name of FlvPlayer, but I don't think that matters.
Do I need any other script on this page. Adobe knowledge center does not indicate to do so.
TIAif that xml file's name is flv.xml and you flvplayback component's instance name is flv, you can use:
var xml:XML = new XML();
xml.ignoreWhite = true;
xml.onLoad = parseXML;
xml.load("flv.xml");
function parseXML(){
flv.contentPath = this.firstChild.firstChild.firstChild.firstChild.nodeValue; -
Read an XML file and send it to client
Hi,
I'm introducing to servlet development and I'm trying to do some AJAX calls. The client side is implemented, but I have some troubles on the server side. I want to open an XML file and send it to the client. How can I do that? Any special header?
I have implemented this test in PHP, so you can imagine what I would like to do:
if ($type == "xml"){
$xml = "";
$file = fopen ("file.xml", "r");
while (!feof ($file)){
$xml .= fgets ($file, 4096);
fclose ($file);
header ("Content-type: text/xml; charset=ISO-8859-1");
echo $xml;
}The XML file is:
<?xml version='1.0' encoding='ISO-8859-1'?>
<users>
<user>
<name>Pepe</name>
<age>18</age>
</user>
<user>
<name>María</name>
<age>21</age>
</user>
</users>Thanks.Not very useful:(.
This is my code:
PrintWriter out = null;
try{
String type = request.getParameter ("type");
if (type.equals ("xml")){
response.setContentType ("text/xml; charset=ISO-8859-1");
out = response.getWriter ();
String xml =
"<?xml version='1.0' encoding='ISO-8859-1'?>" +
"<users>" +
"<user>" +
"<name>Pepe</name>" +
"<age>18</age>" +
"</user>" +
"<user>" +
"<name>María</name>" +
"<age>21</age>" +
"</user>" +
"</users>";
out.println (xml);
}finally{
out.close ();
}This code works. The servlet send back the xml and the client shows the content but, as you can see, i'm not reading the xml file. So my problem is on reading the xml file as a plain text. My code is this:
response.setContentType ("text/xml; charset=ISO-8859-1");
out = response.getWriter ();
String xml = "";
FileReader fr = null;
BufferedReader br = null;
try{
fr = new FileReader (new File ("file.xml"));
br = new BufferedReader (fr);
String linea;
while ((linea = br.readLine ()) != null){
xml += linea;
//System.out.println (linea);
fr.close ();
}catch (Exception e){
e.printStackTrace ();
}But now I get an Exception File not found. The xml file is in the web directory (I'm using net beans 6.8). Where I have to put the file?
Thanks.
Edited by: GagleKas on Mar 15, 2010 6:39 AM -
Insert SWF that calls external XML files and images
Hi
I am using Acrobat XI Pro on a Windows 7 system.
I have a PDF in which I have an SWF file. This SWF file contains text content that is called from an XML file and also some images that is called externally. I have added the folder that contains the XML file and the images by right-clicking the SWF > Properties > Resources > Add Directory. However, none of the content is loading.
I have tried adding the images and xml file separately as well. Even that did not work.
What could be wrong? Please advise.
SreekanthDebugging Flash content in a PDF from the Flash Pro or Flex editor is possible, but it's complicated (you need to juggle about with the SDK to load a special Acrobat plugin). If you're creating these SWFs yourself, the fastest way to debug is to add a bunch of ActionScript calls that report to Acrobat's console to tell you what's going on. Use ActionScript's externalInterface.call() and the Acrobat JS console.println() functions, just like if you were talking to JavaScript in a web page.
Rich media resources cannot be imported globally in Acrobat. In theory it's possible (the ISO standard allows XObject references to shared assets) but there's no authoring tool. -
How to Parse the XML File and create an IDOC?
Hello friends,
I've an xml file which needs to be parsed and create an idoc into SAP to post the New Hire process? I need to create an ABAP for this
Could somebody help me do this?
Thankshere is the sample code for loading local xml file and parsing its using the abov ementioned FM
report y_xml_upload
no standard page heading.
data: filename type string ,
xmldata type xstring .
data: result_xml type standard table of smum_xmltb .
data: return type standard table of bapiret2 .
constants: line_size type i value 255.
data: begin of xml_tab occurs 0,
raw(line_size) type x,
end of xml_tab,
file type string,
size type i.
* upload the xml file
filename = 'C:raja123.xml' .
call function 'GUI_UPLOAD'
exporting
filename = filename
filetype = 'BIN'
has_field_separator = ' '
header_length = 0
importing
filelength = size
tables
data_tab = xml_tab
exceptions
others = 1.
************uncomment this and comment the call of SCMS_BINARY_TO_XSTRING if you dont have this fm in your system.
* if sy-subrc <> 0.
* clear: xmldata.
* exit.
* else.
* data: len type i.
* len = size.
* loop at xml_tab.
* if len <= line_size. exit. endif.
* concatenate xmldata xml_tab-raw(line_size)
* into xmldata in byte mode.
* len = len - line_size.
* endloop.
* if len > 0.
* concatenate xmldata xml_tab-raw(len)
* into xmldata in byte mode.
* len = len - size.
* endif.
* endif.
******* end of comment.
call function 'SCMS_BINARY_TO_XSTRING'
exporting
input_length = size
* FIRST_LINE = 0
* LAST_LINE = 0
importing
buffer = xmldata
tables
binary_tab = xml_tab
exceptions
failed = 1
others = 2
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'SMUM_XML_PARSE'
exporting
xml_input = xmldata
tables
xml_table = result_xml
return = return .
Regards
Raja
do not forget to assign points to helpful answers -
How can I take the part that parses the .XML file and make it a procedure.
CREATE OR REPLACE PACKAGE BODY XMLSTUD6 AS
Author: Jimmy Harris
Created: 5/25/2006
Purpose: 1.This package has an XML file initialized to a variable called DOC .
2.It will then take the values from the XML file and insert them into a PL/SQL table.
3.From the PL/SQL table it will insert values into the STUDENTS table.
4.After step four above, the STUDLOAD procedure will insert (Sequence,Status, .XML file, USER, SYSDATE, ERROR_Message
into the AUDIT_XMLSTUD table regardless if insert status was successfull or not status is indicated by either an Y or
NO and the original XML filed that was currently processed, the date and user who executed the procedure.
If the status was NO then it will insert the Oracle SQLERRM massage, into the REASON_FOR_ERROR column.
If status is Y then REASOK_FOR_ERROR IS NULL.
5,Make sure you embed the xml file with an inner and outer ' ' ie: ' the whole .xml file string ' as the input
parameter into the STUDLOAD procedure.
This package excepts the whole .XML file as a CLOB as an input parameter, so that the end-user will not have
modify the code.
Modification History: 1.6/09/2006 JImmy Harris Modified code, added the Function "WORD_CONVERTER1" to accept the requested text data and
return a coded value back to our Welligent system.
2. Was advised that a front end type of functionality was not neccesary for this issue so I removed the INSERT_XML_FILE,
UPDATE_XML_FILE and the INSERT_XML_file.
FUNCTION WORD_CONVERTER1 (v_domain IN VARCHAR2 := null,
v_incoming IN VARCHAR2 := null) RETURN VARCHAR2 IS
v_well VARCHAR2(32);
v_editdd BOOLEAN;
v_code VARCHAR2(32);
CURSOR C_conv_wrd IS
SELECT WELL
INTO v_code
FROM CONVERSION_TABLE
WHERE DOMAIN = UPPER(TRIM(v_domain))
AND INCOMING = UPPER(TRIM(v_incoming));
BEGIN
OPEN c_conv_wrd;
LOOP
FETCH c_conv_wrd INTO v_code;
EXIT WHEN c_conv_wrd%NOTFOUND;
END LOOP;
CLOSE c_conv_wrd;
RETURN v_code;
END WORD_CONVERTER1;
PROCEDURE STUDLOAD (DOC CLOB) IS
v_parser xmlparser.Parser;
v_doc xmldom.DOMDocument;
v_nl xmldom.DOMNodeList;
v_n xmldom.DOMNode;
v_mm NUMBER;
v_dd NUMBER;
v_yyyy NUMBER;
v_DATE DATE;
v_race VARCHAR2(1);
v_eth VARCHAR2(1);
v_prim_lang VARCHAR2(1);
v_house_lang VARCHAR2(1);
v_gender VARCHAR2(1);
TYPE stuxml_type IS TABLE OF STUDENTS%ROWTYPE;
s_tab stuxml_type := stuxml_type();
v_success VARCHAR2(200);
v_failure VARCHAR2(200);
l_error_code varchar2(200);
BEGIN
-- Create a parser.
v_parser := xmlparser.newParser;
xmlparser.setValidationMode(v_parser, FALSE);
-- Parse the document and create a new DOM document.
SYS.XMLPARSER.PARSECLOB ( v_parser, DOC );
v_doc := SYS.XMLPARSER.getDocument(v_parser);
-- Free resources associated with the Parser now it is no longer needed.
xmlparser.freeParser(v_parser);
-- Get a list of all the STUD nodes in the document using the XPATH syntax.
v_nl := xslprocessor.selectNodes(xmldom.makeNode(v_doc),'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent');
-- Loop through the list and create a new record in a table collection for each STUD record.
FOR stud IN 0 .. xmldom.getLength(v_nl) - 1 LOOP
v_n := xmldom.item(v_nl, stud);
s_tab.extend;
-- Use XPATH syntax to assign values to he elements of the collection.
s_tab(s_tab.last).STUDENT_LAST_NAME :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/LastName');
s_tab(s_tab.last).STUDENT_FIRST_NAME :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/FirstName');
s_tab(s_tab.last).STUDENT_MI :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/MiddleName');
v_dd := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Day');
v_mm := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Month');
v_yyyy := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Year');
v_DATE := TO_DATE(v_mm||' '||v_dd||' '||v_yyyy,'MMDDYYYY');
s_tab(s_tab.last).STUDENT_DOB := v_date;
s_tab(s_tab.last).STUDENT_STREET :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/Street');
s_tab(s_tab.last).STUDENT_APART_NO :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/ApartmentNumber');
s_tab(s_tab.last).STUDENT_COUNTY :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/County');
s_tab(s_tab.last).STUDENT_STATE :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/State');
s_tab(s_tab.last).STUDENT_ZIP :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/ZipCode');
v_race := WORD_CONVERTER1('RACE',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Race')));
v_eth := WORD_CONVERTER1('EHTNICITY',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Ethnicity')));
v_prim_lang:= WORD_CONVERTER1('PRIMARY_LANG',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/PrimaryLanguage')));
v_house_lang:= WORD_CONVERTER1('SECONDARY_LANG',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/HouseholdLanguage')));
v_gender := WORD_CONVERTER1('GENDER',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Gender')));
s_tab(s_tab.last).STUDENT_RACE := v_race;
s_tab(s_tab.last).STUDENT_ETHNIC := v_eth;
s_tab(s_tab.last).STUDENT_PRI_LANG :=v_prim_lang;
s_tab(s_tab.last).STUDENT_SEC_LANG := v_house_lang;
s_tab(s_tab.last).STUDENT_GENDER :=v_gender;
END LOOP;
FOR stud IN s_tab.first..s_tab.last LOOP
INSERT INTO STUDENTS (SHISID, SSN, DOE_SCHOOL_NUMBER,PATIENT_TYPE, TEACHER, HOMEROOM,STUDENT_LAST_NAME, STUDENT_FIRST_NAME, STUDENT_MI,STUDENT_DOB,
STUDENT_BIRTH_CERT, STUDENT_COMM,STUDENT_MUSA, STUDENT_FAMSIZE, STUDENT_FAMINCOME,STUDENT_UNINSURED, STUDENT_LUNCH, STUDENT_ZIP,STUDENT_STATE,
STUDENT_COUNTY, STUDENT_STREET,STUDENT_APART_NO, STUDENT_PHONE, STUDENT_H2O_TYPE,STUDENT_WASTE_TRT, STUDENT_HOME_SET, STUDENT_NONHOME_SET,
STUDENT_GENDER, STUDENT_RACE, STUDENT_ETHNIC,STUDENT_PRI_LANG, STUDENT_SEC_LANG, STUDENT_ATRISK,EMER_COND_MEMO, ASSIST_DEVICE_TYPE,
SCHOOL_ENTER_AGE,STUDENT_CURR_GRADE, S504_ELIG_DATE, S504_DEV_DATE,S504_REV_DATE, STUDENT_504, STUDENT_IEP,IEP_EXP_DATE, GRAD_CLASS, TYPE_DIPLOMA,
GRADE_RETAIN, LIT_PASS_TEST_MATH, LIT_PASS_DATE_MATH,LIT_PASS_TEST_WRITE, LIT_PASS_DATE_WRITE, LIT_PASS_TEST_READ,LIT_PASS_DATE_READ, SPEC_ED_ELIG,
SPEC_ED_CODE,TRANSPORT_CODE, TRANSPORT_NO, PRIME_HANDICAP,PRIME_HANDICAP_PERCENT, PRIME_HANDI_MANAGER, FIRST_ADD_HANDI,FIRST_ADD_HANDICAP_PERCENT,
FIRST_ADD_HANDI_504, FIRST_ADD_HANDI_504_DATE, SECOND_ADD_HANDI, SECOND_ADD_HANDICAP_PERCENT, MED_EXTERNAL_NAME, INS_TYPE, INS_PRI, INS_NAME,
INS_MEDICAID_NO, ELIGDATE, INS_PRIV_INSURANCE, INS_APPR_BILL, INS_APPR_DATE, INS_PARENT_APPR,INS_POL_NAME, INS_POL_NO, INS_CARRIER_NO,
INS_CARRIER_NAME, INS_CARRIER_RELATE, INS_AFFECT_DATE, INS_COPAY_OV, INS_COPAY_RX, INS_COPAY_AMBUL,INS_COPAY_EMER, INS_COPAY_OUTPAT,STUDENT_INACTIVE,
PHYS_ID, ENCOUNTERNUM,USERID,MODDATE, STUDENT_ID, S504_DISABILITY,CHAPTER1, WELLNESS_ENROLL, SCHOOL_OF_RESIDENCE,INITIAL_IEP_DATE, CALENDAR_TRACK,
USA_BORN,ALT_ID, FUTURE_SCHOOL, IEP_LAST_MEETING,IEP_LAST_SETTING, IEP_LAST_REFER_EVAL, THIRD_ADD_HANDI,LEP, GIFTED, IEP_EXIT_REASON,
CASE_MANAGER_ID, INTAKE_NOTES, CALLER_PHONE,CALL_DATE, CALLER_RELATIONSHIP, CALLER_NAME,BUSINESS_PHONE, FAX, EMAIL,HIGHEST_EDUCATION, INTAKE_DATE,
SERVICE_COORDINATOR, DISCHARGE_DATE, DISCHARGE_REASON, DISCHARGE_NOTES,INTAKE_BY, INTAKE_STATUS, IEP_LAST_SERVED_DATE,IEP_APC_DATE, IEP_EXIT_DATE,
ADDRESS2, LEGAL_STATUS, RELIGION, EMPLOYMENT_STATUS, TARG_POP_GROUP1, TARG_POP_GROUP2, MARITAL_STATUS,THIRD_ADD_HANDI_PERCENT, LAST_INTERFACE_DATE,
SERVICE_PLAN_TYPE,CURRENT_JURISDICTION, FIPS, BIRTH_PLACE_JURISDICTION,BIRTH_PLACE_HOSPITAL, BIRTH_PLACE_STATE, BIRTH_PLACE_COUNTRY,
OTHER_CLIENT_NAME, SIBLINGS_WITH_SERVICES, PERM_SHARE_INFORMATION,PERM_VERIFY_INSURANCE, REFERRING_AGENCY, REFERRING_INDIVIDUAL,AUTOMATIC_ELIGIBILITY,
INTAKE_IEP_ID, FUTURE_SCHOOL2,FUTURE_SCHOOL3, TRANSLATOR_NEEDED, TOTAL_CHILDREN_IN_HOME,REFERRED_BY, FAMILY_ID, SCREENING_CONSENT_FLAG,PICTURE_FILE,
DUAL_ENROLLED, DOE_SCHOOL_NUMBER2)
VALUES (123456789025, null,null ,null,null,null ,s_tab(stud).STUDENT_LAST_NAME,s_tab(stud).STUDENT_FIRST_NAME,s_tab(stud).STUDENT_MI,
s_tab(stud).STUDENT_DOB,null ,null,null ,null,null,null,null,s_tab(stud).STUDENT_ZIP,s_tab(stud).STUDENT_STATE ,s_tab(stud).STUDENT_COUNTY,
s_tab(stud).STUDENT_STREET,s_tab(stud).STUDENT_APART_NO,null,null,null ,null , null,
s_tab(stud).STUDENT_GENDER ,s_tab(stud).STUDENT_RACE , s_tab(stud).STUDENT_ETHNIC,
s_tab(stud).STUDENT_PRI_LANG ,s_tab(stud).STUDENT_SEC_LANG, null, null ,null , null,
null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null,
null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null,
null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null,
null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null,
null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null,
null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null, null,null );
END LOOP;
INSERT INTO AUDIT_XMLSTUD1(XMLSTUDPK,USERID,XMLFILE,STATUS,REASON_FOR_ERROR,DATE_MODIFIED)
VALUES(SEQ_XMLSTUD1.NEXTVAL,USER,DOC,'Y',NULL,SYSDATE);
HTP.HTMLOPEN;
v_success:= 'The values from the .XML file have been successfully inserted into the STUDENTS table in the Oracle Database.';
htp.bold(v_success);
HTP.HTMLCLOSE;
COMMIT;
-- Free any resources associated with the document now it that it is no longer needed.
xmldom.freeDocument(v_doc);
EXCEPTION
WHEN OTHERS THEN
l_error_code := SQLERRM;
INSERT INTO AUDIT_XMLSTUD1(XMLSTUDPK,USERID,XMLFILE,STATUS,REASON_FOR_ERROR,DATE_MODIFIED)
VALUES(SEQ_XMLSTUD1.NEXTVAL,USER,nvl(DOC,TO_CLOB('No .XML file entered, user pressed button without entering correct information.')),'NO',l_error_code,SYSDATE);
HTP.HTMLOPEN;
v_failure:= 'The attempt made to insert files to the Student table has failed because,'||l_error_code;
htp.bold(v_failure);
HTP.HTMLCLOSE;
COMMIT;
END STUDLOAD;
PROCEDURE UPDSTUDLOAD (DOC CLOB) IS
v_parser xmlparser.Parser;
v_doc xmldom.DOMDocument;
v_nl xmldom.DOMNodeList;
v_n xmldom.DOMNode;
v_mm NUMBER;
v_dd NUMBER;
v_yyyy NUMBER;
v_DATE DATE;
v_race VARCHAR2(1);
v_eth VARCHAR2(1);
v_prim_lang VARCHAR2(1);
v_house_lang VARCHAR2(1);
v_gender VARCHAR2(1);
TYPE stuxml_type IS TABLE OF STUDENTS%ROWTYPE;
s_tab stuxml_type := stuxml_type();
v_success VARCHAR2(200);
v_failure VARCHAR2(200);
l_error_code varchar2(200);
BEGIN
-- Create a parser.
v_parser := xmlparser.newParser;
xmlparser.setValidationMode(v_parser, FALSE);
-- Parse the document and create a new DOM document.
SYS.XMLPARSER.PARSECLOB ( v_parser, DOC );
v_doc := SYS.XMLPARSER.getDocument(v_parser);
-- Free resources associated with the Parser now it is no longer needed.
xmlparser.freeParser(v_parser);
-- Get a list of all the STUD nodes in the document using the XPATH syntax.
v_nl := xslprocessor.selectNodes(xmldom.makeNode(v_doc),'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent');
-- Loop through the list and create a new record in a table collection for each STUD record.
FOR stud IN 0 .. xmldom.getLength(v_nl) - 1 LOOP
v_n := xmldom.item(v_nl, stud);
s_tab.extend;
-- Use XPATH syntax to assign values to he elements of the collection.
s_tab(s_tab.last).STUDENT_LAST_NAME :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/LastName');
s_tab(s_tab.last).STUDENT_FIRST_NAME :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/FirstName');
s_tab(s_tab.last).STUDENT_MI :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/MiddleName');
v_dd := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Day');
v_mm := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Month');
v_yyyy := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Year');
v_DATE := TO_DATE(v_mm||' '||v_dd||' '||v_yyyy,'MMDDYYYY');
s_tab(s_tab.last).STUDENT_DOB := v_date;
s_tab(s_tab.last).STUDENT_STREET :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/Street');
s_tab(s_tab.last).STUDENT_APART_NO :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/ApartmentNumber');
s_tab(s_tab.last).STUDENT_COUNTY :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/County');
s_tab(s_tab.last).STUDENT_STATE :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/State');
s_tab(s_tab.last).STUDENT_ZIP :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/ZipCode');
v_race := WORD_CONVERTER1('RACE',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Race')));
v_eth := WORD_CONVERTER1('EHTNICITY',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Ethnicity')));
v_prim_lang:= WORD_CONVERTER1('PRIMARY_LANG',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/PrimaryLanguage')));
v_house_lang:= WORD_CONVERTER1('SECONDARY_LANG',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/HouseholdLanguage')));
v_gender := WORD_CONVERTER1('GENDER',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Gender')));
s_tab(s_tab.last).STUDENT_RACE := v_race;
s_tab(s_tab.last).STUDENT_ETHNIC := v_eth;
s_tab(s_tab.last).STUDENT_PRI_LANG :=v_prim_lang;
s_tab(s_tab.last).STUDENT_SEC_LANG := v_house_lang;
s_tab(s_tab.last).STUDENT_GENDER :=v_gender;
END LOOP;
FOR stud IN s_tab.first..s_tab.last LOOP
UPDATE STUDENTS
SET
STUDENT_LAST_NAME = s_tab(stud).STUDENT_LAST_NAME,
STUDENT_FIRST_NAME = s_tab(stud).STUDENT_FIRST_NAME,
STUDENT_MI = s_tab(stud).STUDENT_MI,
STUDENT_DOB = s_tab(stud).STUDENT_DOB,
STUDENT_ZIP = s_tab(stud).STUDENT_ZIP,
STUDENT_STATE = s_tab(stud).STUDENT_STATE,
STUDENT_COUNTY = s_tab(stud).STUDENT_COUNTY,
STUDENT_STREET = s_tab(stud).STUDENT_STREET,
STUDENT_APART_NO = s_tab(stud).STUDENT_APART_NO
WHERE SHISID = 123456789025;
END LOOP;
INSERT INTO AUDIT_XMLSTUD1(XMLSTUDPK,USERID,XMLFILE,STATUS,REASON_FOR_ERROR,DATE_MODIFIED)
VALUES(SEQ_XMLSTUD1.NEXTVAL,USER,DOC,'Y',NULL,SYSDATE);
HTP.HTMLOPEN;
v_success:= 'The updated .XML file has been successfully saved to the STUDENTS table in the Oracle Database.';
htp.bold(v_success);
HTP.HTMLCLOSE;
COMMIT;
-- Free any resources associated with the document now it that it is no longer needed.
xmldom.freeDocument(v_doc);
EXCEPTION
WHEN OTHERS THEN
l_error_code := SQLERRM;
INSERT INTO AUDIT_XMLSTUD1(XMLSTUDPK,USERID,XMLFILE,STATUS,REASON_FOR_ERROR,DATE_MODIFIED)
VALUES(SEQ_XMLSTUD1.NEXTVAL,USER,nvl(DOC,TO_CLOB('No .XML file entered, user pressed button without entering correct information.')),'NO',l_error_code,SYSDATE);
HTP.HTMLOPEN;
v_failure:= 'The attempt made to insert files to the Student table has failed because,'||l_error_code;
htp.bold(v_failure);
HTP.HTMLCLOSE;
COMMIT;
END UPDSTUDLOAD;
PROCEDURE DELSTUDLOAD (DOC CLOB) IS
v_parser xmlparser.Parser;
v_doc xmldom.DOMDocument;
v_nl xmldom.DOMNodeList;
v_n xmldom.DOMNode;
v_mm NUMBER;
v_dd NUMBER;
v_yyyy NUMBER;
v_DATE DATE;
TYPE stuxml_type IS TABLE OF STUDENTS%ROWTYPE;
s_tab stuxml_type := stuxml_type();
v_success VARCHAR2(200);
v_failure VARCHAR2(200);
l_error_code varchar2(200);
BEGIN
-- Create a parser.
v_parser := xmlparser.newParser;
xmlparser.setValidationMode(v_parser, FALSE);
-- Parse the document and create a new DOM document.
SYS.XMLPARSER.PARSECLOB ( v_parser, DOC );
v_doc := SYS.XMLPARSER.getDocument(v_parser);
-- Free resources associated with the Parser now it is no longer needed.
xmlparser.freeParser(v_parser);
-- Get a list of all the STUD nodes in the document using the XPATH syntax.
v_nl := xslprocessor.selectNodes(xmldom.makeNode(v_doc),'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent');
-- Loop through the list and create a new record in a table collection for each STUD record.
FOR stud IN 0 .. xmldom.getLength(v_nl) - 1 LOOP
v_n := xmldom.item(v_nl, stud);
s_tab.extend;
-- Use XPATH syntax to assign values to he elements of the collection.
s_tab(s_tab.last).STUDENT_LAST_NAME :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/LastName');
s_tab(s_tab.last).STUDENT_FIRST_NAME :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/FirstName');
s_tab(s_tab.last).STUDENT_MI :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/MiddleName');
v_dd := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Day');
v_mm := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Month');
v_yyyy := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Year');
v_DATE := TO_DATE(v_mm||' '||v_dd||' '||v_yyyy,'MMDDYYYY');
s_tab(s_tab.last).STUDENT_DOB := v_date;
s_tab(s_tab.last).STUDENT_STREET :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/Street');
s_tab(s_tab.last).STUDENT_APART_NO :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/ApartmentNumber');
s_tab(s_tab.last).STUDENT_COUNTY :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/County');
s_tab(s_tab.last).STUDENT_STATE :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/State');
s_tab(s_tab.last).STUDENT_ZIP :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/ZipCode');
END LOOP;
FOR stud IN s_tab.first..s_tab.last LOOP
DELETE FROM STUDENTS
WHERE SHISID = 123456789025;
END LOOP;
INSERT INTO AUDIT_XMLSTUD1(XMLSTUDPK,USERID,XMLFILE,STATUS,REASON_FOR_ERROR,DATE_MODIFIED)
VALUES(SEQ_XMLSTUD1.NEXTVAL,USER,DOC,'Y',NULL,SYSDATE);
HTP.HTMLOPEN;
v_success:= 'The .XML file has been successfully deleted from the STUDENTS table in the Oracle Database.';
htp.bold(v_success);
HTP.HTMLCLOSE;
COMMIT;
-- Free any resources associated with the document now it that it is no longer needed.
xmldom.freeDocument(v_doc);
EXCEPTION
WHEN OTHERS THEN
l_error_code := SQLERRM;
INSERT INTO AUDIT_XMLSTUD1(XMLSTUDPK,USERID,XMLFILE,STATUS,REASON_FOR_ERROR,DATE_MODIFIED)
VALUES(SEQ_XMLSTUD1.NEXTVAL,USER,nvl(DOC,TO_CLOB('No .XML file entered, user pressed button without entering correct information.')),'NO',l_error_code,SYSDATE);
HTP.HTMLOPEN;
v_failure:= 'The attempt made to insert files to the Student table has failed because,'||l_error_code;
htp.bold(v_failure);
HTP.HTMLCLOSE;
COMMIT;
END DELSTUDLOAD;
END XMLSTUD6;Try opening the problem files using a text editor or file viewer to see what the first few bytes contain. All valid FM binary files for FM 11 will contain <MakerFile 11.0> in the first bytes of the file.
When updating books, it's sometimes better to just to create a new book file and add the files to that.
When renaming files in a book, changes at the system level will break any links/cross-references between files, so it's always best to use the Rename option in the Book file to change FM file names. This will maintain the correct linkages. -
Hi All,
We are trying to access the Create Deployment method stated below
http://msdn.microsoft.com/en-us/library/windowsazure/ee460813
We have uploaded the Package in the blob and browsing the configuration file. We have checked trying to upload manually the package and config file in Azure portal and its working
fine.
Below is the code we have written for creating deployment where "AzureEcoystemCloudService" is our cloud service name where we want to deploy our package. I have also highlighted the XML creation
part.
byte[] bytes =
new byte[fupldConfig.PostedFile.ContentLength + 1];
fupldConfig.PostedFile.InputStream.Read(bytes, 0, bytes.Length);
string a = Encoding.UTF8.GetString(bytes, 0, bytes.Length);
string base64ConfigurationFile = a.ToBase64();
X509Certificate2 certificate =
CertificateUtility.GetStoreCertificate(ConfigurationManager.AppSettings["thumbprint"].ToString());
HostedService.CreateNewDeployment(certificate,
ConfigurationManager.AppSettings["SubscriptionId"].ToString(),
"2012-03-01", "AzureEcoystemCloudService", Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot.staging,
"AzureEcoystemDeployment",
"http://shubhendustorage.blob.core.windows.net/shubhendustorage/Infosys.AzureEcoystem.Web.cspkg",
"AzureEcoystemDeployment", base64ConfigurationFile,
true, false);
<summary>
/// </summary>
/// <param name="certificate"></param>
/// <param name="subscriptionId"></param>
/// <param name="version"></param>
/// <param name="serviceName"></param>
/// <param name="deploymentSlot"></param>
/// <param name="name"></param>
/// <param name="packageUrl"></param>
/// <param name="label"></param>
/// <param name="base64Configuration"></param>
/// <param name="startDeployment"></param>
/// <param name="treatWarningsAsError"></param>
public static
void CreateNewDeployment(X509Certificate2 certificate,
string subscriptionId,
string version, string serviceName, Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot deploymentSlot,
string name, string packageUrl,
string label, string base64Configuration,
bool startDeployment, bool treatWarningsAsError)
Uri uri = new
Uri(String.Format(Constants.CreateDeploymentUrlTemplate, subscriptionId, serviceName, deploymentSlot.ToString()));
XNamespace wa = Constants.xmlNamespace;
XDocument requestBody =
new XDocument();
String base64ConfigurationFile = base64Configuration;
String base64Label = label.ToBase64();
XElement xName = new
XElement(wa + "Name", name);
XElement xPackageUrl =
new XElement(wa +
"PackageUrl", packageUrl);
XElement xLabel = new
XElement(wa + "Label", base64Label);
XElement xConfiguration =
new XElement(wa +
"Configuration", base64ConfigurationFile);
XElement xStartDeployment =
new XElement(wa +
"StartDeployment", startDeployment.ToString().ToLower());
XElement xTreatWarningsAsError =
new XElement(wa +
"TreatWarningsAsError", treatWarningsAsError.ToString().ToLower());
XElement createDeployment =
new XElement(wa +
"CreateDeployment");
createDeployment.Add(xName);
createDeployment.Add(xPackageUrl);
createDeployment.Add(xLabel);
createDeployment.Add(xConfiguration);
createDeployment.Add(xStartDeployment);
createDeployment.Add(xTreatWarningsAsError);
requestBody.Add(createDeployment);
requestBody.Declaration =
new XDeclaration("1.0",
"UTF-8", "no");
XDocument responseBody;
RestApiUtility.InvokeRequest(
uri, Infosys.AzureEcosystem.Entities.Enums.RequestMethod.POST.ToString(),
HttpStatusCode.Accepted, requestBody, certificate, version,
out responseBody);
<summary>
/// A helper function to invoke a Service Management REST API operation.
/// Throws an ApplicationException on unexpected status code results.
/// </summary>
/// <param name="uri">The URI of the operation to invoke using a web request.</param>
/// <param name="method">The method of the web request, GET, PUT, POST, or DELETE.</param>
/// <param name="expectedCode">The expected status code.</param>
/// <param name="requestBody">The XML body to send with the web request. Use null to send no request body.</param>
/// <param name="responseBody">The XML body returned by the request, if any.</param>
/// <returns>The requestId returned by the operation.</returns>
public static
string InvokeRequest(
Uri uri,
string method,
HttpStatusCode expectedCode,
XDocument requestBody,
X509Certificate2 certificate,
string version,
out XDocument responseBody)
responseBody =
null;
string requestId = String.Empty;
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(uri);
request.Method = method;
request.Headers.Add("x-ms-Version", version);
request.ClientCertificates.Add(certificate);
request.ContentType =
"application/xml";
if (requestBody != null)
using (Stream requestStream = request.GetRequestStream())
using (StreamWriter streamWriter =
new StreamWriter(
requestStream, System.Text.UTF8Encoding.UTF8))
requestBody.Save(streamWriter,
SaveOptions.DisableFormatting);
HttpWebResponse response;
HttpStatusCode statusCode =
HttpStatusCode.Unused;
try
response = (HttpWebResponse)request.GetResponse();
catch (WebException ex)
// GetResponse throws a WebException for 4XX and 5XX status codes
response = (HttpWebResponse)ex.Response;
try
statusCode = response.StatusCode;
if (response.ContentLength > 0)
using (XmlReader reader =
XmlReader.Create(response.GetResponseStream()))
responseBody =
XDocument.Load(reader);
if (response.Headers !=
null)
requestId = response.Headers["x-ms-request-id"];
finally
response.Close();
if (!statusCode.Equals(expectedCode))
throw new
ApplicationException(string.Format(
"Call to {0} returned an error:{1}Status Code: {2} ({3}):{1}{4}",
uri.ToString(),
Environment.NewLine,
(int)statusCode,
statusCode,
responseBody.ToString(SaveOptions.OmitDuplicateNamespaces)));
return requestId;
But every time we are getting the below error from the line
response = (HttpWebResponse)request.GetResponse();
<Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>BadRequest</Code>
<Message>The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message>
</Error>
Any help is appreciated.
Thanks,
ShubhenduPlease find the request XML I have found it in debug mode
<CreateDeployment xmlns="http://schemas.microsoft.com/windowsazure">
<Name>742d0a5e-2a5d-4bd0-b4ac-dc9fa0d69610</Name>
<PackageUrl>http://shubhendustorage.blob.core.windows.net/shubhendustorage/WindowsAzure1.cspkg</PackageUrl>
<Label>QXp1cmVFY295c3RlbURlcGxveW1lbnQ=</Label>
<Configuration>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</Configuration>
<StartDeployment>true</StartDeployment>
<TreatWarningsAsError>false</TreatWarningsAsError>
</CreateDeployment>
Shubhendu G -
Reading from XML file and updating the table ????
Hi
I have package which reads the hier.XML file and does Update inserts into the 5 tables
i have table called MAIN_tbl with the column cur_date.
The package kicks if this cur_date is one day less than the hier.XML file DT.
Currently i m manually checking this date's to make sure the Main_tbl cur_date is n sync with
hier.XML file DT.
for example :- hier.xml file DT is "20091020" then main_table cur_date should be 10/19/2009
in order to kicks of the pakage.
what i m looking to do ??
compare the hier.xml DT with the main_table cur_date,
if cur_date is -1(Preivous day) of hier.xml DT then run hier_pkg(Package)
if not then update main_table cur_date to -1(previous day) of the hier.xml DATE
Then later write the above logic to update the main_table in a procedure, and
then call the package from the procedure.
below are the top few lines of the hier.XML file which is relevant to the one which we are trying to do
<?xml version = '1.0'?>
<HIER_POSTING num ="111" HIER_TYP="CD" DT="20091020" Global="Y">
FYI : The hier.XML file is located in UNIX space.
How do i accomplish this. any idea ????
Thank you so much in advance. For giving a thought on this problem!!!Any thought on this guys ???
Thanks!! -
Reading the datas in the Xml file and store it in the array using java
Hi every one
Can any one send me the java coding for traversing through XML file and get the data and store it in the array (SAX parser is prefered)
its a urgent requirement . please help me
Regards
Aruni send it to ur mail id ,
could you please send me a mail to [email protected] -
Reading XML file and skip certain elements/attributes??
Hi folks!
Suppose I have a XML file looking like this:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE dvds SYSTEM "DTDtest.dtd">
<dvds>
<dvd>
<title>
Aliens
</title>
<director>
James Cameron
</director>
<format>
1.85:1
</format>
</dvd>
<dvd>
<title>
X-Men
</title>
<director>
Bryan Singer
</director>
<format>
2.35:1
</format>
</dvd>
</dvds>
In my Java application I want to read this XML file and print it on the screen (including all tags etc). So far, so good. BUT, if I want to skip certain elements, i.e. all information about the dvd 'X-Men', how am I supposed to do this? In other words, I would like my app to skip reading all information about X-Men and continue with the next <dvd>... </dvd> tag. Is this possible?
My code so far is from the XML tutorial from Sun and it looks like this:
import java.io.*;
import org.xml.sax.*;
import org.xml.sax.helpers.DefaultHandler;
import javax.xml.parsers.SAXParserFactory;
import javax.xml.parsers.ParserConfigurationException;
import javax.xml.parsers.SAXParser;
public class MyXML extends DefaultHandler
public static void main(String argv[]) {
if (argv.length != 1) {
System.err.println("Usage: cmd filename");
System.exit(1);
// Use an instance of ourselves as the SAX event handler
DefaultHandler handler = new MyXML();
// Use the default (non-validating) parser
SAXParserFactory factory = SAXParserFactory.newInstance();
try {
// Set up output stream
out = new OutputStreamWriter(System.out, "UTF8");
// Parse the input
SAXParser saxParser = factory.newSAXParser();
saxParser.parse( new File(argv[0]), handler);
} catch (Throwable t) {
t.printStackTrace();
System.exit(0);
static private Writer out;
//===========================================================
// SAX DocumentHandler methods
//===========================================================
public void startDocument()
throws SAXException
emit("<?xml version='1.0' encoding='UTF-8'?>");
nl();
public void endDocument()
throws SAXException
try {
nl();
out.flush();
} catch (IOException e) {
throw new SAXException("I/O error", e);
* <p>This method prints the start elements including attr.
* @param namespaceURI
* @param lName
* @param qName
* @param attrs
* @throws SAXException
public void startElement(String namespaceURI,
String lName, // local name
String qName, // qualified name
Attributes attrs)
throws SAXException
String eName = lName; // element name
if ("".equals(eName)) eName = qName; // namespaceAware = false
emit("<"+eName);
if (attrs != null) {
for (int i = 0; i < attrs.getLength(); i++) {
String aName = attrs.getLocalName(i); // Attr name
if ("".equals(aName)) aName = attrs.getQName(i);
emit(" ");
emit(aName+"=\""+attrs.getValue(i)+"\"");
emit(">");
public void endElement(String namespaceURI,
String sName, // simple name
String qName // qualified name
throws SAXException
emit("</"+qName+">");
* <p>This method prints the data between 'tags'
* @param buf
* @param offset
* @param len
* @throws SAXException
public void characters(char buf[], int offset, int len)
throws SAXException
String s = new String(buf, offset, len);
emit(s);
//===========================================================
// Utility Methods ...
//===========================================================
// Wrap I/O exceptions in SAX exceptions, to
// suit handler signature requirements
private void emit(String s)
throws SAXException
try {
out.write(s);
out.flush();
} catch (IOException e) {
throw new SAXException("I/O error", e);
// Start a new line
private void nl()
throws SAXException
String lineEnd = System.getProperty("line.separator");
try {
out.write(lineEnd);
} catch (IOException e) {
throw new SAXException("I/O error", e);
Sorry about the long listing... :)
Best regards
/PaulA possibility that comes to mind is to create an XSLT script to do whatever it is you want - and call it from inside the program. The XSLT script can be stashed inside your .jar file by using getClass().getClassLoader().getResource("...")
- David -
Create xml file and write data in to it:
Hi All,
I have a small requirement here.....
I have a java program which reads a xml file.
Now i have stored the contents of that file in to a java object.
I want a sample code now which would take theabove mentioned java object as an input ,create a xml file and write these entries in to the file.
Can anyone help me in this?
Your help would be appreciated.
Thanks in advance.
vrkrHmmm. There is nothing special about an XML file to any other file. The data is simply formatted in a certain way. So to write an XML file, it is no different to writing any other form of file in Java (assuming you know the structure of the xml format to write - which you should)
If you don't know how to write files using Java I would suggest using the Java Tutorial found on java.sun.com and do some reading up about I/O since this is fairly fundamental.
http://java.sun.com/docs/books/tutorial/
http://java.sun.com/docs/books/tutorial/essential/io/index.html -
Reading data From XML file and setting into ViewObject to Pouplate ADF UI
Hi,
I have following requirement.
I would like to read data from XML file and populate the data in ViewObject so that the data can be displayed in the ADF UI.
Also when user modifies the data in the ADF UI, it should be modified back into to ViewObject.
Here is an example - XML file contains Book Title and Author. I would like to read Book Title and Author from XML file and set it into ViewObject Attribute and then display Book title and Author in ADF UI page. Also when user modifies Book title and Author, I would like to store it back in View Object.
Please help me with this requirement and let me know if any solution exist in ADF, for populating the ADF UI screen fields with external XML file data.
ThanksRead chapter 42 http://download.oracle.com/docs/cd/E16162_01/web.1112/e16182/bcadvvo.htm of the fusion developer guide
Section 42.7, "Reading and Writing XML"
Section 42.8, "Using Programmatic View Objects for Alternative Data Sources"
Timo -
Parse exisitng xml file and recreate another xml file with different struct
Is it possible in java using dom parser to parse an exisiting xml file and recreate a new xml file from data obtained by parsing old xml file.
I checked on old forum threads and everywhere either parsing xml file has been explained or creating new xml file from scratch has been shown.
Any examples/guidance will be appreciated....The general process is:
Document dom1 = ... // the parsed document
Document dom2 = ... // new document constructed on the fly
Node nD1 = ... // some random node found in dom1
// copy the node from dom1 and associate with dom2
Node nD2 = dom2.importNode(nD1, true);
// ... treat nD2 as a node which can now be inserted into dom2 ...
Node otherD2 = ... // some other node already in dom2
otherD2.appendChild(nD2);Note, in this example the nD1 node is copied (including any sub-nodes) into a new node, nD2. You can alternately move the node from one Document to another using Document.adoptNode(), however this may fail (see the javadoc). -
Parse XML file and extract data
I'd like to parse an XML file and get some data extracted as columns.
Input file country.xml:
<?xml version="1.0" encoding="UTF-8"?>
<MAS Action="Insert">
<Country ObjectId="100000000000000009" VersionId="8"><Id>1</Id><NlTexts><Name Language="de">Land1</Name><Name Language="en">Country1</Name></NlTexts></Country>
<Country ObjectId="100000000000000033" VersionId="2"><Id>2</Id><NlTexts><Name Language="de">Land2</Name><Name Language="en">Country1</Name></NlTexts></Country>
</MAS>
I'd like to parse the xmlfile in order to get the following output
Required result:
col1 col2 col3
1 Land1 Country1
2 Land2 Country2
or alternatively
col1 col2
1 Land1
1 Country1
2 Land2
2 Country2
I tried extract-function
select extract((XMLTYPE(BFILENAME('XML_DAT_DIR', 'country.xml'),
NLS_CHARSET_ID('AL32UTF8'))) , '/*/*/Id') as "xdata"
from dual;
xdata
<Id>1</Id><Id>2</Id>
and XMLTABLE (but how can I add the countries now)
SELECT *
FROM XMLTABLE('/*/*/Id'
PASSING XMLTYPE(BFILENAME('XML_DAT_DIR', 'country.xml'),
NLS_CHARSET_ID('AL32UTF8'))
COLUMN_VALUE
<Id>1</Id>
<Id>2</Id>
DB version 11.2.0.3 on Windows 64bit
Thanks,
TimHere are a few examples.
For your required output :
SELECT *
FROM XMLTable(
'/MAS/Country'
passing XMLType(bfilename('TEST_DIR', 'country.xml'), nls_charset_id('AL32UTF8'))
columns col1 number path 'Id'
, col2 varchar2(30) path 'NlTexts/Name[1]'
, col3 varchar2(30) path 'NlTexts/Name[2]'
or, if the Language attribute is significant :
SELECT *
FROM XMLTable(
'/MAS/Country'
passing XMLType(bfilename('TEST_DIR', 'country.xml'), nls_charset_id('AL32UTF8'))
columns col1 number path 'Id'
, col2 varchar2(30) path 'NlTexts/Name[@Language="de"]'
, col3 varchar2(30) path 'NlTexts/Name[@Language="en"]'
For your alternate output :
SELECT x1.col1
, x2.col2
--, x2.col3
FROM XMLTable(
'/MAS/Country'
passing XMLType(bfilename('TEST_DIR', 'country.xml'), nls_charset_id('AL32UTF8'))
columns col1 number path 'Id'
, names xmltype path 'NlTexts/Name'
) x1
, XMLTable(
'/Name'
passing x1.names
columns col2 varchar2(30) path '.'
--, col3 for ordinality
) x2
(uncomment col3 to see what it does)
or, in a shorter way :
SELECT *
FROM XMLTable(
'for $i in /MAS/Country
, $j in $i/NlTexts/Name
return element r { $i/Id, $j }'
passing XMLType(bfilename('TEST_DIR', 'country.xml'), nls_charset_id('AL32UTF8'))
columns col1 number path 'Id'
, col2 varchar2(30) path 'Name'
Maybe you are looking for
-
How can I set up a smart playlist for those free songs from iTunes?
I have been downloading all those free songs that iTunes gives out every week. I just realized that I never listen to them because they are not all grouped together. Is there a way to do that? I tried using a smart folder to do that but I don't think
-
Display webPage in java application?
How do you display HTML format(like contents displayed in a browser) in an Java application?Which swing component do you use and can anyone tell me how to go about with it?? Thanks
-
Hi all, I am having an issue with a check that appears to be voided. When running FCHX to extract the check to be sent to the bank we get a failure message saying the check is invalid. I tried to run FCHG to reverse the voiding of the check but it
-
TREAT function in Oracle 9.2
It seems to me that TREAT function doesn't work properly in Oracle 9.2. It is written in "What's new" section of "PL/SQL User's Guide and Reference" for Oracle 9.2: TREAT function for object types You can dynamically choose the level of type inherita
-
I cannot read downloaded E-books on my computor. I am instructed to authorize my account. When I try to i get the message :Activation server error, Code E_AUTH_NOT_READY