XML files from CR2 files shot with Canon 7D do not save???

I opened a bunch of images shot with a Canon 7D through the Raw Processor in Bridge CS5. AFter making adjustments I clicked the "Done" button thinking the XML files would be upgraded. Nothing happens. What am I doing wrong. With all my other files this works perfectly.

everyone that is having this problem I think I have solved it.
Short quick answer so you dont have to read further. Check your date/time setting on your camera, it's probably wrong.
Longer version:
I too have a Canon 7D and the other day I had taken some pictures of my son with santa and was experiencing the same problem.  I could edit in camera raw, but the changes would not save. I would not get the little icon next to the image either.Every other image worked fine except for the ones I took that day.  I was chalking it up to maybe a bad import of the images and maybe somethign was corrupting. but I was still able to open them and edit and save psd's so I wasnt too worried yet.
Today we went out and took some images of holiday lights and I came home downloaded the images and the same issue happened again. I went back to the santa pictures and I could edit them and the changes were saving now. So I googled and came across this post. Once I saw you too were having the same problem but it went away the next day, and another person was only having a issue with one camera I figured it had to be a setting in the camera.
And since the problem goes away with time I decided to check my time on my camera and it was set to 12/22 (today is 12/21). So I corrected the time took a test shot and downloaded it to the computer and it works perfectly again.
Hope this helps!
Ponno

Similar Messages

  • Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

    Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
    Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

    The Oracle documentation has a good overview of the options available
    Generating XML Data from the Database
    Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
    You can also find some information in XML DB FAQ

  • How to generate XML file from SQL file !

    I am new to XML publisher. I known one way to generate XML file is register one report file in concurrent manager.
    But I want to generate XML file from sql file.
    Could someone show me how to code in sql file, how to register is in concurrent manager.
    Thanks !

    Hi
    Phew ... not sure we have the space here. So I can point you in the right direction:
    1. XML data generation - there are two packages in the db you can use with a plsql procedure, XMLGEN and SQL XML. You can also use java APIs too. Try checking the db documentation and search for the above methods.
    2. Registering the report - the system administrators guide will provide this info. Hooking the program up with XMLP is covered here - http://www.oracle.com/technology/products/applications/publishing/resource/CM%20Whitepaper5.0.pdf
    Regards, Tim

  • Why cannot I open NEF files from a Nikon D600 with Photoshop CS5?

    When I try to open raw NEF files from a Nikon D600 with Photoshop CS5 I get: "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw"
    Nikon D600, however, is among the camera models listed as compatible with Camera Raw CS5.
    I have never had any problem in Camera Raw CS5 and older versions with raw NEF files from a Nikon D80 camera.
    Is there an update for CS5 to make it compatible with Nikon D600 raw NEF files?
    Many thaks in advance.

    Which verison of camera raw do you have installed? I would update to the latest camera raw plug in. Here is a link to 6.7
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5372

  • Every time I open a New File from the File Menu and I open it all of my desktop items are in it. What's up with that?

    Every time I open a New File from the File Menu and I open it all of my desktop items are in it. What's up with that?

    This is configured in Finder preferences under the General icon. You can make some changes to that behavior.

  • Can I create pdf files from Outlook 2003 messages with Acrobat XI Standard?

    Can I create pdf files from Outlook 2003 messages with Acrobat XI Standard?

    Yes, Outlook 2003 is compatible with Acrobat XI Standard and you can create PDFs from emails.
    For reference: http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html

  • My jpg files from CR2 edits in CS6/CC are not being imported into LR5.

    My jpg files from CR2 edits in CS6/CC are not being imported into LR5. Bridge and Explorer can see them ok. Tried to reimport but LR5 cant see them.
    The file numbers are the same as original CR2 but have the jpg extension. TIFFS and PSDs seem ok. Can anybody help please?

    how do I get all these files in my catalogue in the correct places cos they scattered around a bit
    That's kind of a broad question ... and there are many different approaches ... so I will explain my approach, and other people can explain their approach.
    My approach is to assign keywords and optionally captions and titles and other metadata to all of your photos, and use those to organize and search. Then, it doesn't matter what folders things are located in, if you want to see all your pictures of Chicago, you simply click on the arrow to the far right of the keyword Chicago. You don't have to remember what folders to look in, and this works even if the photos are scattered in a dozen different folders. In addition, since photos must be in one and only one folder, that limits your ability to organize; but you can assign as many keywords as you'd like to a photo, so a single photo can have keywords "Chicago" "Zoo" "Elephant" "Vacation" "Illinois" "United States" etc.

  • Get the BICMD file from SDA file

    Hi Experts,
      When we want to deploy the seeburger mappings from the Mapping Designer, we will generate the SDA file from BICMD file.
    Is there any way, to regenerate the BICMD file from the SDA file?
    Please help.
    Regards,
    Ravi Kanth Talagana

    Hi Ravi,
    Certain options :
    1)
    Mappings that are generated from BIC MD is used to create XML/EDI Files corresponding to the mapping that u r going to used.U can also modify standard mappings by making a new project in BIC MD.After this,this BIC MD creates SDA files which u have to deploy on the SAP XI server using SDM.Then u can these mappings in ur XI system.
    2)
    on Seeburger installation CD you can find in Release_SeeXI_1.._(SAPXI_3.0_SP..\SAP\CD-<yuor solution>\data\AdapterBIC\deploy a file called Mappings_sys.sda. This is library with Seeburger standard Mappings delivered with adapters. You need to deploy this file (Mappings_sys.sda) with SDM and then you can use those mappings in XI. Names of the contained mappings you can find in Release_SeeXI_1.._(SAPXI_3.0_SP..\SAP\CD-<your solution>\data\ SAPXI_ContentGuide_<your solution>_en.pdf. For test purpose you can use this project but if you need some additional mappings you have to install BIC MD, create your new mappings and generate new sda file (Mappings_user.sda). At any time it’s allowed to use only 1 Mappings_user.sda and 1 Mappings_sys.sda. So every new deployed Mappings_user.sda overwrites previous one. Mappings_sys.sda is deployed only by the initial installation.
    [Kindly reward points for useful reply]
    Vishal

  • IMovie footage shot with Canon XL2 looks exports to m4v which looks lousy

    Video shot with Canon XL2, captured/imported into iMovie, it looks good in iMovie but when sharing it, it turns into m4v. Is this correct? Burned DVD in iDVD and it looks lousy. Isn't it supposed to be a mov file and not m4v?

    Does that require me to get rid of my 100 Hz or 200 Hz screen and exchange it for a 24 Hz screen?
    No.  This stuff looks equally good on CRT, Plasma or LCD.  (Though I do recommend leaving off such things as 100 Hz modes, as they have a tendency to produce the opposite effect, making film look more like video.)
    Film shot at 24 FPS is shown as 48 half frames,
    Where on earth did you get that idea?  Film is always shown theatrically as whole frames, whether 24 or 48 fps.
    When will you send me the ticket?
    Opening day for my first fiction project will be in my cousin's basement home theater, on a 9 foot screen with overhead projection.  I'll let you know when the release date approaches.  Better get your ticket early, though.  I'm expecting a line all the way around the shed, stretching clear to the garbage cans.

  • Trying to email file from adobe reader 11.0 email addresses will not longer auto complete after moving to office 365

    trying to email file from adobe reader 11.0 email addresses will not longer auto complete after moving to office 365. It did work with older versions of outlook. Tried changing to global address book. It will only access global address book offline

    I have the same issue.  On a clean machine with Office 2013 64 bit installed.

  • Acrobat 11 doesn't create pdf. files from doc. files

    I tried to create a pdf. file from a doc. file (Office 2003). Acrobat 11 instead opens a warning message with the following contents (translated from German):
    A high security level has been chosen. Start the application that created the document, activate the dialogue "safety warning", choose "always trust macros from this resource, activate ... from Adobe Systems Inc. (the message aborts there).
    I selected "Extras/Macro/Safety/Safety level" , there I selected "low". The above mentioned message still comes up.
    What do you suggest to do in order to finally create pdf. files from doc. files?
    Additional information: Creating pdf. files from xls. files (Excel), txt. files (Editor) and saving a webpage as a pdf. file all work fine.
    Thanks for your input!

    Although Office 2003 is old compared to Acrobat XI, according to Compatible web browsers and PDFMaker applications it should work, though support has passed end of life.
    So my first test (if it were me) would be to see if PDFMaker works if run in the simplest way (the only way I ever use it, this right click conversion stuff isn't in my worldview). That is, does the Acrobat menu appear in Word and does it work? If it does not work, no other method based on it can work.

  • Browsing and opening files from a file server

    Hello!
    I am interested if it is possible with AIR to browse files from a file server that is connected to a local network and open them. F.e. I want to create an application that opens template files with their native programs and save them on the file server under different name.
    Thank you in advance
    Lynda

    AIR 2 (now at labs.adobe.com) has features you are looking for. An AIR 2 application can open a file in the default system application registered for the file type. (The file server must be a mounted volume on the computer.)
    An extended desktop application (an AIR 2 application that is installed with a native installer) can communicate with another application. So, if the AIR (extended desktop) application knows the path to the native application, it can open that application and communicate with it. If the native application has APIs for opening and saving files, the AIR application can communicate with it using those APIs. (So, this functionality depends on the capabilities of the native application.)

  • How many Ways jar files from ear file on a jboss can be downloaded on clien

    Aoa
    How many Ways jar files from ear file on a jboss can be downloaded on client side
    like jnlp etc..
    Regards
    M Fazal Ur Rehman

    First, you need to be able to boot from the Recovery HD:
    Boot Using Command+R keys:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "COMMAND" and the "R" keys together.
      3. Release the keys when the Utilities Menu appears.
    Once at the Utilities Menu select Terminal from the Utilities menu in the screen's menubar. Now, you need to know where these new files are located. You move to any location using the 'cd' command such as cd /Users/user_name/Documents, then press RETURN. Replace user_name with your actual username. Next you need to do a directory listing to see if your files are in that location, Documents. Use ls -al to do a directory listing of the files and folders in Documents. If you find your new files there, then connect an external drive or flash drive. You will need to know the name you have assigned to this drive. It needs to be already formatted. Copy your files using cp /Documents/filename /Volumes/volname/filename. Replace volname and filename with those that apply. Press RETURN.
    Or take it to your local Apple Store and see if they can do the chore for you.

  • How can I check the open-mode of an opened file from the file refNum?

    How can I check the open-mode of an opened file from the file refNum?
    Especially whether a file is opened as read-only or write-only? I haven't found any VI in the panel with file VIs.
    Thanks for any hints!

    Check this post. Probably you can use a kernel.dll call.
    http://forums.ni.com/t5/LabVIEW/file-date-created/m-p/109836

  • How can I convert on HDF file from HWS file?

    how can I convert on HDF file from HWS file?

    Well by opening up the HWS file with HDFView, it contains the below structure.  In the axis0 properties (time axis) there is a field called increment that is the sampling rate I used (5 nanoseconds).  But I do NOT see any additional info in terms of triggering modes or delays, etc.
    wfm_group0
    axes
    axis0
    axis1
    data_vector
    data (here is our data, I verified it is correct)
    id
    traces
    trace0 (we don't care about this, I think)
    vectors
    vector0
    data (not sure what the difference is between this and axis1
    wfm_group0 (1576, 2)
        Group size = 4
        Number of attributes = 5
            major_version = 2
            minor_version = 0
            release_version = 6
            type = NI-Waveform
            writer = NI-HWS
    axis0 (7424, 2)
        Group size = 0
        Number of attributes = 5
            implicit? = 1
            increment = 5.0E-9
            numDigits = 57
            ref_time = 0
            start = 0.0

Maybe you are looking for

  • All scripts are missing from scripts tab

    I dont know why but all the scripts that were in my scripts tab are missing.  This happened once before and I found a fix but cant locate the steps to that again.  I remember it had something to do with backing up a few files and have ID recreate the

  • Set default directory and file permissions

    I'm trying to use setfacl to set the default permissions for directories and files but I get an error saying "sudo: setfacl: command not found." What I am trying to do is share a specific directory on a local external drive connected by Thunderbolt.

  • How I create a simple instaltion to Oracle 10g Client

    Firstly I dont know where I post about this... So Post here. I need create a Simple instalation to Oracle Client... example: Next, next and conclude. when I define the parameters previously... this is possible?

  • DYNAMIC QUERY FOR INSERT USING SELECT

    Hi All, I am facing an issue...I am un bale to do an dynamic query. i have explained my code and the sample create, insert statements. I shud insert values in a table using a select statement dynamically.. create table listing (tel_no varchar2(16), l

  • Recon from flat file

    Hi, We have few codes that needs to be reflected in the lookup table, these codes change often and needs to be updated manually, so wanted to know is there in way to recon these values in to the lookup table -can this be acheived through GTC? Thanks