XML Forms Builder Errors after SP Stack 14 upgrade

Hello,
I upgraded development portal to NW04s SPS14 (from SPS11).
In XML Forms Builder, try to open my existing project but not succedd. I get the message "Operation Timeout".
"The current operation timed out and was aborted. This was caused by network communication problems . Some data may have been lost.try again later"
After click cancel, I get a second message:
"There are no projects stored on the server"
In KM content, etc folder, xmlforms , I can see all my projects !!!
Of course, no network problems exists.. portal is working ok, ...
I applied OSS note 1150307 - "Internal Server Error when accessing XML Forms Builder" but I have the same problem.
Any idea¿?
Thanks and Regards
Noemí Llano

Hello, I did a test...
from the same client machine ...(with JRE 1.6.0_03) I start XML Forms ....
with SPS11 portal, I can see the Projects.
With SPS14 portal, I can not see the projects
Thanks and Regards
Noemí

Similar Messages

  • XML Form Build Error Unexpected http response code 500: Internal Server Err

    Hi
    I have the following error message when i am trying to load  XML Form Builder
    "Unexpected http response code 500: Internal Server Error "
    When i am trying to Run the test its shows me the follwoing error log.
    Test Environment: XML Forms Builder Environment Check *
    Start Time: 2008-09-17 15:09:53                       *
    End Time: 2008-09-17 15:09:59                         *
    - Test: Java Environment
    - OK
    -      Start Time: 2008-09-17 15:09:53
    -      End Time: 2008-09-17 15:09:53
    -      Java Runtime Version is 1.6.0_02
    - Test: Connection Tests
    - ! Test Failed !
    -      Start Time: 2008-09-17 15:09:53
    -      End Time: 2008-09-17 15:09:59
    -      A test in the suite failed
         - Test: Download XML Forms Builder Jar
         - OK
         -      Start Time: 2008-09-17 15:09:53
         -      End Time: 2008-09-17 15:09:55
         -      Successfully loaded XML Forms Builder Jar from http://zhmscad8.whirlpool.com:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/km.appl.xmlforms.xfbuilder_core.jar, Version 6.4.1
         - Test: Download SAP XML Toolkit Jar
         - OK
         -      Start Time: 2008-09-17 15:09:55
         -      End Time: 2008-09-17 15:09:59
         -      Successfully loaded SAP XML Toolkit Jar from http://zhmscad8.whirlpool.com:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/sapxmltoolkit.jar
         - Test: XML Forms Builder Version
         - ! Test Failed !
         -      Start Time: 2008-09-17 15:09:59
         -      End Time: 2008-09-17 15:09:59
         -      Unexpected http response code 500: Internal Server Error
         - Test: Load Global Settings
         - Not Started
         -      This test depends on the test "XML Forms Builder Version", which did not complete successfully
         - Test: Load Project List
         - Not Started
         -      This test depends on the test "XML Forms Builder Version", which did not complete successfully
    Please let me know the how to slove this Problem.
    Thanks
    Mmukesh
    Edited by: mmukesh reddy on Sep 17, 2008 9:29 PM

    Hi Koti Reddy
    That is not related to my issue.
    Here this error only comming for two users in my group.
    The environment every thing working for remaining user.  But only that two users are facing the problem.
    So please let me know is there any security issues.
    Thanks
    mmukesh

  • XML Form Builder Error using JRE Version 1.6.0_05

    Hi Experts,
    I am trying to create an XML Form using XML Form Builder. But I noticed that the root nodes under the data model area of the said tool is not clickable(even if it has + sign on it)thus hindering me to continue. I encounter this error using jre version 1.6.0_05.
    Can someone help with this?
    Thanks a lot
    Edited by: Leah Mendoza on Oct 9, 2008 2:07 AM
    Edited by: Leah Mendoza on Oct 9, 2008 2:07 AM

    Hi Leah,
    Have you tried double clicking?
    If this doesn't solve the issue, you might want to try using a different version of the browser and disable the pop up blocker on your browser.
    Please try this out and let me know.
    Regards
    Mazin

  • XML Form Build Error Unexpected http response code 500: Error

    Dear All,
    I am facing the error when I am starting the XML Forms Builder.The tool checks the environment in which the XML Forms Builder is running (xfbuildertest.html)
    I am getting the following result :
    - Test: Connection Tests
    - ! Test Failed !
    - A test in the suite failed
    - Test: XML Forms Builder Version
    - ! Test Failed !
    - Unexpected http response code 500: Internal Server Error
    Test: Load Global Settings
    - Not Started
    - This test depends on the test "XML Forms Builder Version", which did not complete successfully
    - Test: Load Project List
    - Not Started
    - This test depends on the test "XML Forms Builder Version", which did not complete successfully
    Please help me.
    Regards
    Pravesh

    Hi Lorcan.
    So what exactly happens when you try to start XML Forms builder, do you get an actual error or does it just not start at all?
    > Actually the News are not getting displayed . The HTML (Html tages)are not getting rendered properly in XML Form Builder.
       This news are perfectly working in other environment  (Dev/Qlty) but not in Production .. where i am facing the issue of rendering the news ( not in correct format as expected)
    It is appearing as link. where as in my other environment the Text in proper HTML format.
    (Link of News appearing in production) whereas in Dev/Qlty proper text with Heading/Font/Colour appears. Or are you only seeing errors when you run the environment check?
    > I am getting the errors when running the environment check on in Production but not in Development/Quality.
    Did you try it on different clients or with different users? Is this a new installation or have you recently upgraded? Are all your components on the same SP level?
    > This is new installation but SP level are exactly same across the system(Dev/Qlty/Prod).
    Also the check the settings and found proper..
    Root Directory * /usr/sap/<System-ID>/SYS/global/config/cm/etc*
    Please let me know am I missing something..
    Why its not running on my production system.
    Regards
    Pravesh

  • XML Form Builder  errors

    There is errors as follow:
    com.sapportals.wcm.WcmException: Could not load stylesheet.com.sap.engine.lib.xml.util.NestedException: Could not load XSLWhen. Stylesheet: null, element:
    com.sapportals.wcm.WcmException: Could not load stylesheet.com.sap.engine.lib.xml.util.NestedException: Character not allowed in XPath, '•'
    Is there any way to solve ?
    Thank you and Regards .

    Hi Chen,
    It is good if you post something as it will help other people who are facing the same problem. can you please post what was the root cause for your problem.
    thanks
    pk

  • XML Forms Builder error

    Hello to all,
    I'm trying to preview my new project and getting an error:
    "error handling http request"
    Restart of the server fix the problem.
    Any clue?
    Thanks in advance
    Yoav Madar
    DSW

    Hi Vijay,
    Please clear all client side caches an try it again.
    In particular, you have to do the following steps:
    (1) Clear the Java PluginCache at
        Start->Settings->ControlPanel->JavaPlugin->Cache
    (2) Clear the BrowserCache of your Browser at
        Tools->InternetOptions->DeleteFiles
    (3) Close ALL BrowserWindows ... Try it again.
    Kind Regards
    --Matthias

  • ERROR for save a form created in XML Form Builder

    Hello everyone:
    I am having an error message when I try to save a form in the XML form builder and I donk know what I need to do for fix it.
    Warning:
    An error occurred when copying temporary files. The saved project state can be opened in the XML Form Builder, but the old state will be generated. The error was: An unexpected error occurred: null.
    If anyone knows how to fix it I'll thanks your help!
    Tzitzi

    Hi, someone can help me with this?

  • Error in news created in XML Form Builder

    Dear Experts
    I have created news in XML Form builder (three forms edit, rendered list and show). Created two iviews NewsExplorer and NewsBrowser.I have exposed these iviews for relevent users. Now the problem is the edit for and the show form of the XML news is not working for few users. While opening the edit form and show form for few users it is giving the below portal runtime message.
    BEGINING OF ERROR MESSAGE----
    Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.KMC/low_safety/com.sap.km.cm/components/xmlformpreview).
    END OF ERROR MESSAGE----
    Appreciate your response.
    Regards
    Shanmukha Rao Banisetti

    Try adding everyone group to the low_safety security zone...

  • Error writing output with iview for xml form builder

    Hi,
    I created a Xml Form Builder's project in which I developed an "Edit" and "ListEdit" sheet.
    I also created an iview for theese in which the code link is:"com.sap.km.cm.xmlform",and the field for Style Sheet for List and for single item are set up correctly,but when I tried the preview the following error message happened:
    com.inqmy.lib.xsl.xslt.XSLOutputException: Error writing output. -> org.w3c.dom.DOMException: Root Element is already present, cannot be appended as a child.
    could someone help me?
    thank's a lot!
    Nick.

    Hi,
    Now I'm confused,what do you mean with create new data? Are users editing existing documents
    (as if they go to a document example.xml > edit) or they are creating new documents (as if they go
    on folder > new > forms)?
    The problem is, in both cases a user would need read/write permissions.
    The normal flow content (data) is created in KM is as follows:
    1. user is assigned to a role
    2. role contains KM Navigation iView
    3. KM Navigation iView executes com.sap.km.cm.navigation component
    4. user chooses New > Form UI command (edit_xml_forms)
    5. edit_xml_forms UI command executes its code (com.sapportals.wcm.rendering.uicommand.cm.UIXMLFormsCreateCommand) and open xml edit for the user
    6. user fill the form and click Save, form is created into folder
    For what I understood so far, your requirement basically asks you to go directly to step 5, it is
    possible to pass a URL that goes directly to step 5, the UI command button, but if you do that
    you won't have a context, so chances that it will work are slim, since a context is required to
    fill the parameters asked by the app (like folder, user, permissions, etc). Even though, in some cases you can
    still pass the parameters via post in the URL but you must know which service/parameters the
    app asks for it, also a URL is static...
    That was the create scenario, I think it's more cons than pros, users would still be
    able to bypass the URL iView created for that, I'd suggest evaluating again if it's really
    a problem having users access cm to manage data
    kind regards,
    Rafael

  • Error in XML Forms Builder

    Dear all,
    I am trying to create News form in XML forms builder but XML form builder persitently throws following error.
    Error: The edit form does not contain a save button or link
    Warning: The name property is not referenced. A GUID will be used as the XML file name.
    what may be the reason.
    Regards,
    Murali

    Hi
    1) data schema not expanding ?
    check ur JRE version installed on ur computer.
    some JRE version doesnot support XML Forms builder functions.
    my JRE version is 1.5.0.70. It really works here .
    upgrade or degrade the version of JRE in ur computer will solve ur problem.
    2) Error: The edit form does not contain a save button or link
    Warning: The name property is not referenced. A GUID will be used as the XML file name.
    This is something to do with u.
    have a look at the manual how to create the XML forms builder onceagain will solve ur problem.
    Check these links:
    http://help.sap.com/saphelp_nw04/helpdata/en/8f/fe743c74fa6449e10000000a11402f/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3f9a090-0201-0010-d4bb-bb3fc5e91cc5
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee639033-0801-0010-0883-b2c76b18583a
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/7f99a69d-0701-0010-1783-cf847ec929f8
    Regards,
    Vijay.
    Edited by: vijayakumar kanniah mohan on May 2, 2008 10:05 AM

  • Cannot use XML Forms Builder - HTTP response: 500 - Internal Server Error

    Hi,
    I am trying to use XML Forms Builder, have added the corresponding role to my profile and when I create a new application or do anything I get the following error popup:
    HTTP response: 500 - Internal Server Error.
    What should I do ??
    Thank you for your help.
    Thibault Schalck

    Hi,
    Check the below link for environment checking of XML Form Builder
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9e/9c8f411467ac5fe10000000a1550b0/frameset.htm
    Raghu

  • Hi i am getting error in xml form builder

    hi
    i created edit,renderlistitem,show  i haveadded buttons from extras-buttons
    i am getting error as
    Error:Edit form doenot contain save button or link
    what could be the reason how to solve it
    pls reply

    Hi,
       Have you gone through the link <a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee639033-0801-0010-0883-b2c76b18583a">XML Form Builder</a>, if not read this. This link will help to do your requirement.  Still you have any doubts, i'll help you.
    Regards,
    Venkatesh. K
    /* Points are Welcome */

  • Error in XML form builder application

    Hi SDN,
    I have created a form builder application. I am able to create items from the application. But when i try to edit or delete the item...From the edit option if I try to save or preview or cancel or reset ....it is throwing the following error message
    Runtime Error
    An exception occured while processing the request.
    Additional information: Exception during PageProcessorComponent.doContent()
    Exception ID = a0d623c1-d35e-2b10-8ab7-f6c10479e59b
    How to rectify the following issue....
    Regards,
    Ganesh N

    Hi,
    I have also encountered this problem the first time I did XML form builder.
    A simple restart of my portal solved the problem.
    Fabien.

  • Behavior of XML Form Builder after SP 13 upgrade

    Dear Experts,
    We are working on E.P 7.0 SP 10 and we've recently applied SP 13 and started testing the system.
    What we found on XML Form Builder is, we are unable to add schema (under Data Model) to the project.
    Can some one help us where exactly went wrong.
    Best Regards,
    Satyadev

    Hi,
    i think, i have faced the same problem recently.
    I had the problem that i saw the 3 categorys: namespace,data schema and properties.
    But i couldn't open them by clicking on them. This is also your problem?
    What i did with lots of hours of testing.
    1.Once you have managed to add something to the data schema you are fine. Then it will always be opened. ( Try opening an existing project and you will see that.)
    So you could open an old project and modify this.
    2. It is still possible to open the Data Schema. I don't know where to click exactly but i click like 100s of times on the symbol of Data Schema and with a little bit of luck it opens. If it doesn't work, i restart the Forms Builder and i try again.
    Regards,
    Marcus

  • Error in XML form builder

    Dear Experts
    When I am opening XML Form builder, both my form builder window and the EP window are closed.
    Appreciate your response.
    Regards
    Shanmukha Rao Banisetti

    Hi Shanmukha,
    Login to the portal with administrator rights.
    Replace the url with
    http://host:portnumber/irj/go/km/docs/etc/xmlforms/xfcheck/xfbuildertest.html
    You can access the XML form builder environment check.
    Run the application and see if you miss something.
    Good Luck!
    Sandeep Tudumu

Maybe you are looking for

  • Exporting to multiple PDF's from one report

    I have a requirement to create multiple PDF's from one report. My thought is that I can I can create a foreach loop that cycles through one of my groups.  I would then like to have each file have the name of that group.  If anyone could help me on ho

  • Microsoft.​net and HP support assistant don't work , can't find an answer here.

    HP support assistant has stopped working and Microsoft.net error reporting shim stopped working. Messages come up repeatly and every day. What to do about it. Non computer person haveing trouble.

  • Prepopulate a form in JSP

    Hello, I would like to prepopulate the text box below(in a jsp) so that instead of just showing the lastName of the user, it shows the full name of the user. <%! String lastName = "a"; String firstName = "b"; %> <input type="text"      readonly="true

  • Joins in BI Administration layer

    Hi, I have created few dimension in Owb, along with a cube. now i imported them in BI administrations physical layer. is it necessary to join them both on physical and business model an mapping layer or its enough to join them on physical layer. seco

  • Indexing a membership directory in CS2

    I'm building a 256 page membership directory. There are 8 sections and a member may be listed in more than one section. These listings are being imported from 55 different Excel files. I want to create an index in the back that will list members in a