XML Gateway Outbound transaction error

Hi,
We are trying to send a XML file to an outside vendor using XML gateway but facing issue in doing the HTTP post.
As per the XML Gateway user guide I have setup the Hub definition with protocol type as being HTTP. protocol address as the one provided by the vendor and created a hub user.
I have also setup a 'custom' outbound transaction type.
And then setup a 'Trading Partner' linked it to the transaction type and the hub. and loaded the DTD and Map file.
I am able to generate the XML file successfully but it does not get delivered or is being rejected by the vendor.
I am trying to narrow down to if the issue exists on our end and the file is not being sent correctly or it is being rejected once it reaches the http site.
I get the following error message on looking at the underlying log table:
Response: HTTP/1.1 500 Internal Server Error
Connection: close
Date: Tue, 26 Oct 2010 19:22:10 GMT
Server: Microsoft-IIS/6.0
X-Powered-By: ASP.NET
Cache-Control: private
Content-Type: application/soap+xml; charset=utf-8
Content-Length: 1805
<?xml version="1.0" encoding="utf-8"?><soap:Envelope
xmlns:soap="http://www.w3.org/2003/05/soap-envelope"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><soap:Code><soap:Value>soap:Receiver</soap:Value></soap:Code><soap:Reason><soap:Text
xml:lang="en">System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Xml.XmlException: Data at the root level is invalid. Line 1, position 1.
any help will be much much appreciated.
Thanks
Amit

Yes i was able to go to the URL using my machine browser. Since Oracle is installed on a linux machine i do not think I will be able to install a browser and go to the site from the oracle machine. I also tried pinging www.google.com and that seemed to work so i am sure the server is able to connect properly.
Can you suggest any other way to verify that the file is being sent out and the issue is on the other end? I was hoping if i could send the file to any other outside link that will be a good enough test of file going out of the network.

Similar Messages

XML Gateway outbound from BPEL

We are trying to get the data from EBS using BPEL Process through XML Gateway outbound.
We created XML Gateway DTD and Map and successfully posting to ECX_OUTBOUND and other sysyems(WebMethods).
Now we are trying access it from BPEL. We created Receive activity to get the XML Payload from ECX_OUTBOUND. But Process is struck in receive activity. Receive activity is waiting for response.
I am not sure we may be doing some thing wrong. Please help us.

I have created screen-shots to show that.
Receive
Variable
Port
I have also tried adding header variable to receive activity in xml but it's not working
<receive name="Receive_1" createInstance="yes"
variable="Receive_1_Dequeue_InputVariable_1"
partnerLink="ECX_OUTBOUND" portType="ns1:Dequeue_ptt"
operation="Dequeue" bpelx:headerVariable="Variable_1"/>
Thanks for your help
Pawel
What's more: When I change port type operation input message to Header_msg i gets the message to my Variable_1 of type Header_msg but data loaded to it is in format of this PROCESS_PO_007_msg
I've found in documentation:
Supporting for Normalized Message Properties
To effectively set applications context values required in a BPEL process or to populate
mandatory header variables for XML Gateway inbound transactions to complete
successfully, Adapter for Oracle Applications provides a flexible mechanism that allows
each context value and header variable to be set and passed in the adapter user interface
directly through the Invoke activity. This message normalization feature not only
provides a flexible solution on header support, but also simplifies the design-time tasks
without using an Assign activity to pass header values.
Setting Message Properties for Applications Context
But there is nothing about Outbound transactions....
Edited by: pawel.fidelus on 2009-12-18 02:59
Edited by: pawel.fidelus on 2009-12-18 03:37

XML gateway Outbound process

Hi All,
I am able to generate XML file in the ECX_DOCLOGS table in clob format but i want to store the file generated in the server in a specified location.
Can anyone help me plzzz..
Can we set up the HUB definition in the XML gateway setups.
Thanks,
Pavan

What is the exact R12 release you are on? What is the OS? Database version?
Can you reproduce the issue with other BPEL processes?
Have you reviewed these docs?
Installing Oracle E-Business Suite Integrated SOA Gateway, Release 12 [ID 556540.1]
Oracle E-Business Suite Integrated SOA Gateway Troubleshooting Guide, Release 12 [ID 726414.1]
Thanks,
Hussein

Connecting XML Gateway outbound to BPEL.

Hello Folks,
I am trying to use XML Gateway as a notification mechanism to trigger BPEL in Fusion middleware suite. For example XML Gateway in eBiz will publish a new hire event from XML Gateway to invoke a BPEL process.
The problem I am having is getting XML Gateway event to invoke BPEL. Can some one point me to a tutorial? If you have implemented it in-house, could you please point me to a list of things to-do?
I have gone through XML Gateway users guide as well as Oracle Applications Adapters guide, but still couldn't get the integration working. Any advice would be very much appreciated.
Regards,
Manoj
7139181668(Phone)
[email protected]

Hi,
I was searching about XML gateway on google & found out this link. Here I am providing with URL for XML Gateway. I know its a very old post but may be the link provided by me will prove helpful for someone.
URL for XML Gateway:
http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28351/T430238T430339.htm
cheers,
Abhi..

BPEL Process Errors at XML Gateway

Hi
I am in the process of developing AP Invoice Inbound process using BPEL.
Process errored outs at XML Gateway with below error.
The Standard:OAG, Transaction Type:AP , Transaction SubType:INI and Location Code 1 is not enabled in the XML Gateway Server. Pls check your Setup.
I have gone through the XML Gateway setup but could not able to locate what exactly the problem.
Could anybody help me out to fix this problem.
Regards
Kiran Akkiraju

Hi,
I am also experiencing the very same problem - does anyone have a solution for this or is this a bug?
Thanks.
Tony.

B2b unable to pick the file from xml gateway

Hi All,
I am taking a scenario where B2B picks the files from xml gateway and drop the files in FTP folder. I modified the XML gateway inbound and outbound, i has given my user credentials(unmae, host ,pwd ,sid, port). In agreement in the place of internal delivery channel i has given XML gateway outbound.
Still its unable to pick the files from xml gateway.
Clarify my understanding please
While b2b picks the files from xml gateway, It will pick from ECX_Inbound or ECX_Outbound?
Here i am attaching the logs:
2010.01.15 at 07:32:51:101: B2BStarter thread: B2B - (DEBUG) B2BStarter - Context Initialized
2010.01.15 at 07:32:56:366: B2BStarter thread: B2B - (DEBUG) B2BStarter - Start B2B
2010.01.15 at 07:32:56:369: B2BStarter thread: B2B - (DEBUG) B2BStarter - Starting B2B
2010.01.15 at 07:32:56:392: B2BStarter thread: B2B - (DEBUG) B2BStarter - configuration obtained
2010.01.15 at 07:32:56:395: B2BStarter thread: B2B - (DEBUG) B2BStarter - clear global cache
2010.01.15 at 07:32:56:547: B2BStarter thread: B2B - (DEBUG) XEngine not running. So no need to clear cached objects inside XEngine.
2010.01.15 at 07:32:56:821: B2BStarter thread: B2B - (INFORMATION) Repository:print: [0] HL7 over MLLP Exchange
2010.01.15 at 07:32:56:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [1] EDI X12 over AS1
2010.01.15 at 07:32:56:826: B2BStarter thread: B2B - (INFORMATION) Repository:print: [2] Custom Document over Generic Exchange
2010.01.15 at 07:32:56:829: B2BStarter thread: B2B - (INFORMATION) Repository:print: [3] EDI EDIFACT over Generic Exchange
2010.01.15 at 07:32:56:832: B2BStarter thread: B2B - (INFORMATION) Repository:print: [4] RosettaNet over RNIF
2010.01.15 at 07:32:56:835: B2BStarter thread: B2B - (INFORMATION) Repository:print: [5] EDI X12 over Generic Exchange
2010.01.15 at 07:32:56:837: B2BStarter thread: B2B - (INFORMATION) Repository:print: [6] Custom Document over MLLP Exchange
2010.01.15 at 07:32:56:840: B2BStarter thread: B2B - (INFORMATION) Repository:print: [7] Custom Document over AS1
2010.01.15 at 07:32:56:842: B2BStarter thread: B2B - (INFORMATION) Repository:print: [8] EDI EDIFACT over AS1
2010.01.15 at 07:32:56:845: B2BStarter thread: B2B - (INFORMATION) Repository:print: [9] HL7 over Generic Exchange
2010.01.15 at 07:32:56:848: B2BStarter thread: B2B - (INFORMATION) Repository:print: [10] Custom Document over Internet
2010.01.15 at 07:32:56:851: B2BStarter thread: B2B - (INFORMATION) Repository:print: [11] Custom Document over ebMS
2010.01.15 at 07:32:56:853: B2BStarter thread: B2B - (INFORMATION) Repository:print: [12] EDI X12 over Internet
2010.01.15 at 07:32:56:856: B2BStarter thread: B2B - (INFORMATION) Repository:print: [13] EDI EDIFACT over Internet
2010.01.15 at 07:32:57:649: B2BStarter thread: B2B - (DEBUG) Repository:constructCertSQL SELECT cert.ID, cert.CLASSTYPE FROM TIP_Certificate_ra cert, TIP_Party_ra party, TIP_DocumentExchange_ra docex WHERE cert.ID = docex.signingcredential AND cert.tradingpartner = party.ID AND party.ishosted != 'Y'
2010.01.15 at 07:32:57:785: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Enter
2010.01.15 at 07:32:58:077: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Exit
2010.01.15 at 07:32:58:824: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Enter
2010.01.15 at 07:32:58:827: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize resetListener = true
2010.01.15 at 07:32:58:831: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initdcx = true
2010.01.15 at 07:32:58:891: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize TPAProcessor
2010.01.15 at 07:32:59:010: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Clear TPA Cache
2010.01.15 at 07:32:59:013: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize DataContext. Pool Size 0
2010.01.15 at 07:32:59:038: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Treat Response as Request = false
2010.01.15 at 07:32:59:041: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Exit
2010.01.15 at 07:32:59:043: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize Transport
2010.01.15 at 07:32:59:046: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Initialize Transport Logger.
2010.01.15 at 07:32:59:059: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Transport LogLevel = ERROR
2010.01.15 at 07:32:59:294: B2BStarter thread: B2B - (DEBUG) Repository:Repository:getDeliveryEndPointList() Wallet Location /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
2010.01.15 at 07:32:59:297: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: No Archive dir
2010.01.15 at 07:32:59:300: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: marker :false
2010.01.15 at 07:32:59:314: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: Putting ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO
2010.01.15 at 07:32:59:322: B2BStarter thread: B2B - (INFORMATION) oracle.tip.adapter.b2b.transport.TransportInterface:initialize: Props: ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO file.receiver.wallet_location = /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
file.receiver.wallet_password = *****
file.receiver.polling_interval = 5
file.receiver.path = /ftpdata/elshad1/ice/infile/850/PO
file.receiver.marker = false
marker = false
ccc = false
file.receiver.channel_mask = None
file.receiver.minimum_age = 0
filename_format = %FROM_PARTY%_%TIMESTAMP%.dat
file.receiver.van = false
file.sender.channel_mask = None
file.receiver.user = eiced1
PROTOCOL_ENDPOINT = null
file.receiver.password = *****
file.receiver.preserve_filename = false
transport_callout_waittime = 30
preserve_filename = false
file.receiver.ccc = false
van = false
polling_interval = 5
2010.01.15 at 07:32:59:491: B2BStarter thread: B2B - (DEBUG) initialize TransportReceiver: [Emerson_Robin_FTP_TransportServer < ftp > < Emerson >]
2010.01.15 at 07:32:59:858: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize Initialize AppTransport Logger.
2010.01.15 at 07:32:59:864: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize AppTransport LogLevel = ERROR
2010.01.15 at 07:32:59:949: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Outbound - initialize
2010.01.15 at 07:32:59:953: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Obtaining outbound connection...
2010.01.15 at 07:32:59:956: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
2010.01.15 at 07:32:59:960: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound username: apps
2010.01.15 at 07:33:04:319: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:33:04 GMT+00:00 2010 Outbound - initialize exit
2010.01.15 at 07:33:04:322: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2010.01.15 at 07:33:04:326: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2010.01.15 at 07:33:04:329: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2010.01.15 at 07:33:04:332: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2010.01.15 at 07:33:04:335: B2BStarter thread: B2B8:15:32:157: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:32 GMT+00:00 2010 inbound username: apps
2010.01.15 at 08:15:33:757: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 inbound initialize exit
2010.01.15 at 08:15:33:761: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Outbound - initialize
2010.01.15 at 08:15:33:764: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Obtaining outbound connection...
2010.01.15 at 08:15:33:767: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
2010.01.15 at 08:15:33:770: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound username: apps
2010.01.15 at 08:15:34:473: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:34 GMT+00:00 2010 Outbound - initialize exit
2010.01.15 at 08:15:34:476: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2010.01.15 at 08:15:34:479: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2010.01.15 at 08:15:34:481: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2010.01.15 at 08:15:34:484: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2010.01.15 at 08:15:34:487: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B initialized
2010.01.15 at 08:15:35:928: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
2010.01.15 at 08:15:36:132: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned off, will not listen on IP_OUT_QUEUE for messages
2010.01.15 at 08:15:36:139: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
regards
cnu

Anuj,
The log which i placed on top, thats the complete log and DC log is given below
2010.01.18 at 12:58:06:117: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:11:130: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:16:143: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:21:153: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:26:169: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:31:164: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:36:173: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:41:182: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:46:194: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:51:210: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:56:217: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:01:244: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:06:254: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:11:256: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:16:283: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:21:276: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:26:285: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:31:297: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:36:314: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:41:324: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:46:327: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:51:341: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:56:352: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 13:00:01:359: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered

[URGENT] Get Inbound Message in EBS Using XML Gateway + SOAP

Hi experts,
I want to ask you about how to process the inbound message using XML Gateway and SOAP protocol.
I have 2 EBS instances, let's called it A (source) and B (destination).
FYI, I'm following this ebook: "Oracle E-Business Suite Development and Extensibility Handbook" in chapter 12 regarding Oracle XML Gateway.
So I don't use BPEL PM to do this.
I'm just using EBS with XML Gateway and Integrated SOA Gateway responsibilities.
When I tried to send the XML from A to B using OXTA, it's success, the data can be processed in B and could store in the database.
But when I tried to use SOAP, the XML message that has been sent from A is success, and when I check it on B (Integrated SOA Gateway -> SOA Monitor), the message is in there and I can see the SOAP request and response as well.
SOAP request:
<?xml version="1.0" encoding="UTF-8" ?>
- <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://xmlns.oracle.com/apps/fnd/XMLGateway" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
- <env:Header>
- <ns0:XMLGateway_Header>
<ns0:MESSAGE_TYPE>XML</ns0:MESSAGE_TYPE>
<ns0:MESSAGE_STANDARD>OAG</ns0:MESSAGE_STANDARD>
<ns0:TRANSACTION_TYPE>XKLB</ns0:TRANSACTION_TYPE>
<ns0:TRANSACTION_SUBTYPE>ORDER_DETAILS_XO</ns0:TRANSACTION_SUBTYPE>
<ns0:DOCUMENT_NUMBER>9282</ns0:DOCUMENT_NUMBER>
<ns0:PARTY_SITE_ID>142</ns0:PARTY_SITE_ID>
<ns0:USERNAME>cons.ade</ns0:USERNAME>
<ns0:PASSWORD>cons.ade</ns0:PASSWORD>
</ns0:XMLGateway_Header>
</env:Header>
- <env:Body>
<ns0:ReceiveDocument xsi:type="xsd:string"><ORDER_DETAILS_XO xmlns=""> <ORDER> <ORDNO>100002</ORDNO> <ORDWT>100002</ORDWT> <RDATE/> <CITY>JAKARTA</CITY> <ZIP>17121</ZIP> </ORDER> </ORDER_DETAILS_XO></ns0:ReceiveDocument>
</env:Body>
</env:Envelope>
SOAP response:
- <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header />
- <env:Body>
- <ReceiveDocument_Response xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">
<ResponseCode xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">200</ResponseCode>
<ResponseMsgId xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">BD4EAD91E76051D5E0440021287448DA</ResponseMsgId>
<ResponseInfo xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">Document received and pushed into queue for asynchronous processing. Enqueued message id is 'BD4EAD91E76051D5E0440021287448DA'.</ResponseInfo>
</ReceiveDocument_Response>
</env:Body>
</env:Envelope>
But the problem is the message that has been got in B can't store into the database yet.
I had already changed the Queue in the XML Gateway -> Define Transaction, from APPLSYS.ECX_IN_OAG_Q (this is for OXTA) to APPLSYS.WF_WS_JMS_IN.
After I invoke the webservice and the SOAP message has been got in B, I checked APPLSYS.WF_WS_JMS_IN in database and there is 1 record, the value of USER_DATA column is:
((, , , , , , ((BES_EVENT_NAME, 100, oracle.apps.fnd.wf.ws.inbound.xmltx.receive, , 27), (BES_EVENT_KEY, 100, 796550960, , 27), (BES_PRIORITY, 200, , 1, 23), (BES_FROM_AGENT, 100, [email protected], , 27), (BES_TO_AGENT, 100, [email protected], , 27), (MSG_ID, 100, 1334117503435, , 27), (ECX_MESSAGE_TYPE, 100, XML, , 27), (ECX_MESSAGE_STANDARD, 100, OAG, , 27), (ECX_PARTY_SITE_ID, 100, 142, , 27), (WS_PORT_OPERATION, 100, ReceiveDocument, , 27), (ECX_TRIGGER_ID, 100, 7101, , 27), (UserId, 100, 3020, , 27), (ECX_USERNAME, 100, CONS.ADE, , 27), (ECX_TRANSACTION_SUBTYPE, 100, ORDER_DETAILS_XO, , 27), (ECX_PASSWORD, 100, CONS.ADE, , 27), (ECX_DOCUMENT_NUMBER, 100, 9285, , 27), (BES_PAYLOAD_OBJECT, 100, false, , 27), (ECX_ATTACHMENTS, 100, , , 27), (ECX_TRANSACTION_TYPE, 100, XKLB, , 27), , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , )), 0, , )
When I tried to select APPLSYS.WF_WS_JMS_IN for the 2nd time, there is no result, which means the business event has been triggered, right?
So in this point I still don't have any idea why the process is (likely) ended after enter the Queue and the message can't store into B's database yet.
Do I miss any setup when changing from OXTA into SOAP protocol to send XML message?
Any urgent help most appreciated.
Best Regards,
Rheza

Hi,
Did you ever get any answers to this? We are thinking about the same thing.
Thanks
Darma
[email protected]

How to recover from XML gateway error when generating outbound message

Hi,
Due to a misconfiguration in other part of the system, our Purchase Order Request map (RosettaNet PIP3A4) failed on few dozen of orders and ended with an error.
How can we restart the process and retry the map generation in XML Gateway (as now the problem is fixed)?
Many thanks in advance,
Regards
Kamil

Hi Kamil;
please check below and see its helpful:
http://download.oracle.com/docs/cd/B31017_01/core.1013/b28764/esb002.htm
http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28211.pdf
Regard
Helios

Reg: XML Gateway Error while posting invoice (PROCESS_INVOICE_002 )

I'm trying to post the PROCESS_INVOICE_002 to Oracle 11i XML gateway which is supposed to route to the mentioned trading partner.
When I observed the status through Workflow Admin web App - > Transaction Monitor the message has reached the INBOUND Queue but it is not able to route it/ process it ... and goes to error state with
The Standard:OAG, Transaction Type:INVOICE , Transaction SubType:PROCESS and Location Code Bigmart is not enabled in the XML Gateway Server. Pls check your Setup.
Then I had corrected the setup with the proper TP configuration.
Now I'm getting a different error.
Kindly give me some inputs regarding this.
Now it is giving the below mentioned error. Here is the Process Summary:
Document ID blrgislin15:26ae9b47:11a9c4ae5b9:46b1
Internal Control Number 1656
External Transaction Type INVOICE
External Transaction Subtype PROCESS
Party ID
Party Type
Trading Partner Name N/A
Site Name N/A
Processing Date 19-Jun-2008 16:41:15
Processing Status Error
Processing Message ORA-06502: PL/SQL: numeric or value error: character string buffer too small - ECX_INBOUND_TRIG.WRAP_VALIDATE_MESSAGE
Processing Logfile
The XML Invoice I'm posting is :
<PROCESS_INVOICE_002>
     <CNTROLAREA>
          <BSR>
               <VERB value="PROCESS">PROCESS</VERB>
               <NOUN value="INVOICE">INVOICE</NOUN>
               <REVISION value="002">002</REVISION>
          </BSR>
          <SENDER>
               <LOGICALID>BigMart</LOGICALID>
               <COMPONENT>INVOICE</COMPONENT>
               <TASK>PROCESS</TASK>
               <REFERENCEID></REFERENCEID>
               <CONFIRMATION>0</CONFIRMATION>
               <LANGUAGE>ENG</LANGUAGE>
               <CODEPAGE>UTF8</CODEPAGE>
               <AUTHID>APPS</AUTHID>
          </SENDER>
          <DATETIME qualifier="CREATION">
               <YEAR>2003</YEAR>
               <MONTH>09</MONTH>
               <DAY>22</DAY>
               <HOUR>07</HOUR>
               <MINUTE>30</MINUTE>
               <SECOND>18</SECOND>
               <SUBSECOND>0000</SUBSECOND>
               <TIMEZONE>-0500</TIMEZONE>
          </DATETIME>
     </CNTROLAREA>
     <DATAAREA>
          <PROCESS_INVOICE>
               <INVHEADER>
                    <AMOUNT qualifier="DOCUMENT" type="T">
                         <VALUE>6300</VALUE>
                         <NUMOFDEC>2</NUMOFDEC>
                         <SIGN>+</SIGN>
                         <CURRENCY>USD</CURRENCY>
                         <DRCR>D</DRCR>
                    </AMOUNT>
                    <DATETIME qualifier="DOCUMENT">
                         <YEAR>2003</YEAR>
                         <MONTH>09</MONTH>
                         <DAY>23</DAY>
                         <HOUR>01</HOUR>
                         <MINUTE>00</MINUTE>
                         <SECOND>00</SECOND>
                         <SUBSECOND>0000</SUBSECOND>
                         <TIMEZONE>-0500</TIMEZONE>
                    </DATETIME>
                    <DOCUMENTID>10000</DOCUMENTID>
                    <DESCRIPTN>INVOICES FROM STAPLES</DESCRIPTN>
                    <REASONCODE>INVOICE</REASONCODE>
                    <PARTNER>
                         <NAME index="1">STAPLES-LA</NAME>
                         <PARTNRID>STAPLES-LA</PARTNRID>
                         <PARTNRTYPE>SUPPLIER</PARTNRTYPE>
                         <ADDRESS>
                              <ADDRLINE index="1">22355 WEST ELEVEN MILE ROAD</ADDRLINE>
                              <CITY>LOS ANGELES</CITY>
                              <COUNTRY>US</COUNTRY>
                              <POSTALCODE>48034</POSTALCODE>
                              <STATEPROVN>CA</STATEPROVN>
                         </ADDRESS>
                         <CONTACT>
                              <NAME index="1">JOHN STAPLES</NAME>
                              <CONTCTTYPE>ACCOUNTING</CONTCTTYPE>
                              <EMAIL>[email protected]</EMAIL>
                         </CONTACT>
                    </PARTNER>
               </INVHEADER>
               <INVLINE>
                    <AMOUNT qualifier="EXTENDED" type="T">
                         <VALUE>6300</VALUE>
                         <NUMOFDEC>2</NUMOFDEC>
                         <SIGN>+</SIGN>
                         <CURRENCY>USD</CURRENCY>
                         <DRCR>D</DRCR>
                    </AMOUNT>
                    <AMOUNT qualifier="TOTAL" type="T">
                         <VALUE>6300</VALUE>
                         <NUMOFDEC>2</NUMOFDEC>
                         <SIGN>+</SIGN>
                         <CURRENCY>USD</CURRENCY>
                         <DRCR>D</DRCR>
                    </AMOUNT>
                    <OPERAMT qualifier="UNIT" type="T">
                         <VALUE>6300</VALUE>
                         <NUMOFDEC>2</NUMOFDEC>
                         <SIGN>+</SIGN>
                         <CURRENCY>USD</CURRENCY>
                         <UOMVALUE>1</UOMVALUE>
                         <UOMNUMDEC>0</UOMNUMDEC>
                         <UOM>EA</UOM>
                    </OPERAMT>
                    <QUANTITY qualifier="ITEM">
                         <VALUE>100</VALUE>
                         <NUMOFDEC>2</NUMOFDEC>
                         <SIGN>+</SIGN>
                         <UOM>EA</UOM>
                    </QUANTITY>
                    <LINENUM>1</LINENUM>
                    <DESCRIPTN>1st Invoie Line</DESCRIPTN>
               </INVLINE>
          </PROCESS_INVOICE>
     </DATAAREA>
</PROCESS_INVOICE_002>

Hi, Due to some other problem with my setup, I had to reinstall E-Biz, and again did all the configuration freshly and tried posting the same xml but for the current customer configuration. It went successfully. Here is the xml I'have posted. You can try configuring your transactions and Trading Partner as given in the XML gateway User Guide, which is available as part of the documentation.
<?xml version="1.0"?>
<!DOCTYPE PROCESS_INVOICE_002 SYSTEM "171_process_invoice_002.dtd">
<PROCESS_INVOICE_002>
     <CNTROLAREA>
          <BSR>
               <VERB value="PROCESS">PROCESS</VERB>
               <NOUN value="INVOICE">INVOICE</NOUN>
               <REVISION value="002">002</REVISION>
          </BSR>
          <SENDER>
               <LOGICALID>Bigmart</LOGICALID>
               <COMPONENT>INVOICE</COMPONENT>
               <TASK>PROCESS</TASK>
               <REFERENCEID></REFERENCEID>
               <CONFIRMATION>0</CONFIRMATION>
               <LANGUAGE>ENG</LANGUAGE>
               <CODEPAGE>UTF8</CODEPAGE>
               <AUTHID>APPS</AUTHID>
          </SENDER>
          <DATETIME qualifier="CREATION">
               <YEAR>2008</YEAR>
               <MONTH>07</MONTH>
               <DAY>08</DAY>
               <HOUR>07</HOUR>
               <MINUTE>30</MINUTE>
               <SECOND>18</SECOND>
               <SUBSECOND>0000</SUBSECOND>
               <TIMEZONE>-0500</TIMEZONE>
          </DATETIME>
     </CNTROLAREA>
     <DATAAREA>
          <PROCESS_INVOICE>
               <INVHEADER>
                    <AMOUNT qualifier="DOCUMENT" type="T">
                         <VALUE>6300</VALUE>
                         <NUMOFDEC>2</NUMOFDEC>
                         <SIGN>+</SIGN>
                         <CURRENCY>USD</CURRENCY>
                         <DRCR>D</DRCR>
                    </AMOUNT>
                    <DATETIME qualifier="DOCUMENT">
                         <YEAR>2008</YEAR>
                         <MONTH>07</MONTH>
                         <DAY>08</DAY>
                         <HOUR>01</HOUR>
                         <MINUTE>00</MINUTE>
                         <SECOND>00</SECOND>
                         <SUBSECOND>0000</SUBSECOND>
                         <TIMEZONE>-0500</TIMEZONE>
                    </DATETIME>
                    <DOCUMENTID>10001</DOCUMENTID>
                    <DESCRIPTN>INVOICES FROM STAPLES</DESCRIPTN>
                    <REASONCODE>INVOICE</REASONCODE>
                    <PARTNER>
                         <NAME index="1">BigMart</NAME>
                         <PARTNRID>BigMart</PARTNRID>
                         <PARTNRTYPE>Customer</PARTNRTYPE>
                         <ADDRESS>
                              <ADDRLINE index="1">100 Main Street Bentonville</ADDRLINE>
                              <CITY>Arizona</CITY>
                              <COUNTRY>US</COUNTRY>
                              <POSTALCODE>38019</POSTALCODE>
                              <STATEPROVN>AR</STATEPROVN>
                         </ADDRESS>
                         <CONTACT>
                              <NAME index="1">JOHN STAPLES</NAME>
                              <CONTCTTYPE>ACCOUNTING</CONTCTTYPE>
                              <EMAIL>[email protected]</EMAIL>
                         </CONTACT>
                    </PARTNER>
               </INVHEADER>
               <INVLINE>
                    <AMOUNT qualifier="EXTENDED" type="T">
                         <VALUE>6300</VALUE>
                         <NUMOFDEC>2</NUMOFDEC>
                         <SIGN>+</SIGN>
                         <CURRENCY>USD</CURRENCY>
                         <DRCR>D</DRCR>
                    </AMOUNT>
                    <AMOUNT qualifier="TOTAL" type="T">
                         <VALUE>6300</VALUE>
                         <NUMOFDEC>2</NUMOFDEC>
                         <SIGN>+</SIGN>
                         <CURRENCY>USD</CURRENCY>
                         <DRCR>D</DRCR>
                    </AMOUNT>
                    <OPERAMT qualifier="UNIT" type="T">
                         <VALUE>6300</VALUE>
                         <NUMOFDEC>2</NUMOFDEC>
                         <SIGN>+</SIGN>
                         <CURRENCY>USD</CURRENCY>
                         <UOMVALUE>1</UOMVALUE>
                         <UOMNUMDEC>0</UOMNUMDEC>
                         <UOM>EA</UOM>
                    </OPERAMT>
                    <QUANTITY qualifier="ITEM">
                         <VALUE>100</VALUE>
                         <NUMOFDEC>2</NUMOFDEC>
                         <SIGN>+</SIGN>
                         <UOM>EA</UOM>
                    </QUANTITY>
                    <LINENUM>1</LINENUM>
                    <DESCRIPTN>1st Invoie Line</DESCRIPTN>
               </INVLINE>
          </PROCESS_INVOICE>
     </DATAAREA>
</PROCESS_INVOICE_002>

Got error: Location Code is not enabled in the XML Gateway Server

Hi,
When I perform Compliance rule screening on GTM - Globel Trade Management,that I defined GTM as an Trading Partner on EBS R12.1.3,
GTM can send response to EBS,but I see the following error message via Transaction Monitor on EBS workflow:
[The Standard:OAG, Transaction Type:ITM , Transaction SubType:EXPORT_COMPLIANCE and Location Code GTM6.2 is not enabled in the XML Gateway Server. Pls check your Setup.]
On EBS,I defined an ITM Partner for GTM,named 'GTM6.2',according to the document created by you: ITM Setup.doc
and I also finished the following steps:
1. ITM Application Users
2.ITM Partner Service Types
3.ITM Parameter Setup
4.Order Type Creation: ITM Only
5.Customer Creation: create a customer named 'GTM6.2', also enter 'GTM6.2' as EDI Location
6.Define Transactions on XML Gateway as following:
<Header>:
Party Type: Customer
Transaction Type: ITM
Transaction Sub Type: EXPORT_COMPLIANCE
<External Transactions (Lines)>:
Standard Code: OAG
External Transaction Type: ITM
External Transaction Sub Type: EXPORT_COMPLAINCE
Queue: APPLSYS.ECX_IN_OAG_Q
7.Define Trading Partners on XML Gateway as following:
<Header>:
Trading Partner Type: Customer
Trading Partner Name: GTM6.2
<Trading Partner Details>:
Transaction Type: ITM
External Transaction Type: ITM
External Transaction Sub Type: EXPORT_COMPLAINCE
Map: WSHITEIN
Source Trading Partner Location Code: GTM6.2 (same as the value what defined in EDI Location for customer)
I think the combination of External Transaction Type, External Transaction Subtype, Standard Code,Source Trading Partner Location Code
should be existing once done above steps, I have no idea why the error prompted.
Does someone can tell how to trace the error?
Thanks,
Rambler

user12254038 wrote:
Can you send any supporting documents on ITM Setup? My client is implementing ITM for the first time and I wanted to know more details on how it works in R12.1.3 version of EBS?Oracle International Trade Management (ITM) Partner Integration: Specifications [ID 572524.1]
International Trade Management Integration [ID 259691.1]
How Can I Tell if International Trade Management is Installed or Not? [ID 742539.1]
What are the Required Setups for International Trade Management (ITM) Flows in Shipping Execution? [ID 782861.1]
What Patches Provide the Latest Fixes and Enhancements for ITM Adapter? [ID 465122.1]
How to Generate Debug Information From ITM Adapter for XML Processing [ID 738925.1]
How to Generate Debug File for International Trade Management (ITM) [ID 1294853.1]
Thanks,
Hussein

Error in inbound processing: EDI message - XML Gateway

Hello!
I've setup a DELFOR transaction in B2B and modified XML Gateway settings for internal delivery channel in order to send the message to EBS, but I'm getting weird errors in b2b.log. (XML Gateway in EBS is not setup yet, but it should't be an issue since incoming errors are handled in EBS, and I would just see an inbound transaction with processing errors in Transaction Monitor.)
In the beginning of b2b.log I see this:
2009.07.07 at 15:26:31:897: B2BStarter thread: BusinessLogicLayer - (DEBUG) Push Stack: queryInternalDeliveryChannel
2009.07.07 at 15:26:31:897: B2BStarter thread: BusinessLogicLayer - (DEBUG) Pop Stack: queryInternalDeliveryChannel
2009.07.07 at 15:26:31:897: B2BStarter thread: B2B - (DEBUG) : Tue Jul 07 15:26:31 CEST 2009 inbound initialize
2009.07.07 at 15:26:31:897: B2BStarter thread: B2B - (DEBUG) : Tue Jul 07 15:26:31 CEST 2009 Obtaining inbound connection...
2009.07.07 at 15:26:31:897: B2BStarter thread: B2B - (DEBUG) : Tue Jul 07 15:26:31 CEST 2009 inbound connect string: jdbc:oracle:thin:@server64.xa.si:1521:test2
2009.07.07 at 15:26:31:897: B2BStarter thread: B2B - (DEBUG) : Tue Jul 07 15:26:31 CEST 2009 inbound username: apps
2009.07.07 at 15:26:32:522: B2BStarter thread: B2B - (DEBUG) : Tue Jul 07 15:26:32 CEST 2009 inbound initialize exit
2009.07.07 at 15:26:32:522: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2009.07.07 at 15:26:32:538: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2009.07.07 at 15:26:32:538: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2009.07.07 at 15:26:32:538: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2009.07.07 at 15:26:32:538: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B initialized
After I copy the edi file to the incoming directory B2B starts processing the file:
2009.07.07 at 15:30:01:878: Thread-10: B2B - (DEBUG)
Protocol = File
Version = 1.0
Transport Header
filename:00003442_23.CMS
filesize:12345
file_ext:CMS
fullpath:C:\xa_endpoint\00003442_23.CMS
timestamp:2009-07-06T16:14:29.393+01:00
As I see in the log: B2B finds the trading partner and agreement and all looks fine. But later comes this:
2009.07.07 at 15:30:05:909: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.MessageHandler:deliverMessageToDestination Enter
2009.07.07 at 15:30:05:909: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.MessageHandler:deliverMessageToDestination deliver message to destination. protocol is XMLGateway Queues
2009.07.07 at 15:30:05:909: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.MessageHandler:deliverMessageToDestination deliver message to XMLGW
2009.07.07 at 15:30:05:909: Thread-9: B2B - (DEBUG) : Tue Jul 07 15:30:05 CEST 2009 Converting B2B message to ECX message..
2009.07.07 at 15:30:05:909: Thread-9: B2B - (DEBUG) : Tue Jul 07 15:30:05 CEST 2009 Inbound - B2BtoECX - Enter
2009.07.07 at 15:30:05:909: Thread-9: B2B - (DEBUG) : Tue Jul 07 15:30:05 CEST 2009 B2B Message -
2009.07.07 at 15:30:05:909: Thread-9: B2B - (DEBUG) : COLLABORATION_NAME : null
2009.07.07 at 15:30:05:909: Thread-9: B2B - (DEBUG) : ACTION_NAME : DELFOR
2009.07.07 at 15:30:05:909: Thread-9: B2B - (DEBUG) : DOCUMENT_TYPE : DELFOR
2009.07.07 at 15:30:05:909: Thread-9: B2B - (DEBUG) : DOCUMENT_TYPE_REVISION : D97A
2009.07.07 at 15:30:05:909: Thread-9: B2B - (DEBUG) : SOURCE_NAME : tpartner
2009.07.07 at 15:30:05:909: Thread-9: B2B - (DEBUG) : DESTINATION_NAME : Xa d.d.
2009.07.07 at 15:30:05:909: Thread-9: B2B - (DEBUG) : PAYLOAD : UNB+UNOA.............. edi message continues here
2009.07.07 at 15:30:05:925: Thread-9: B2B - (DEBUG) : PAYLOAD : <?xml version="1.0" ?><Transaction-DELFOR............... xml continues here
2009.07.07 at 15:30:05:925: Thread-9: B2B - (DEBUG) : Tue Jul 07 15:30:05 CEST 2009 ECX Message -
2009.07.07 at 15:30:05:925: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.MessageHandler:handleAppMessageRetry Could not deliver the message; exception message is null
2009.07.07 at 15:30:05:925: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.MessageHandler:handleAppMessageRetry No application side retry
2009.07.07 at 15:30:06:081: Thread-9: B2B - (ERROR) Error -: AIP-50903: Message "0A14011912255682A58000003257C600-1" retry count is zero
     at oracle.tip.adapter.b2b.msgproc.MessageHandler.handleAppMessageRetry(MessageHandler.java:394)
     at oracle.tip.adapter.b2b.msgproc.MessageHandler.deliverMessageToDestination(MessageHandler.java:344)
     at oracle.tip.adapter.b2b.msgproc.Request.putMsg(Request.java:657)
     at oracle.tip.adapter.b2b.msgproc.Request.continueRequest(Request.java:481)
     at oracle.tip.adapter.b2b.msgproc.Request.incomingRequest(Request.java:410)
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:2062)
     at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2574)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2444)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2399)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
     at java.lang.Thread.run(Thread.java:534)
Last message repeats once more and then:
2009.07.07 at 15:30:06:081: Thread-9: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2009.07.07 at 15:30:06:081: Thread-9: BusinessLogicLayer - (DEBUG) Push Stack: updateBusinessMessage
2009.07.07 at 15:30:06:096: Thread-9: BusinessLogicLayer - (DEBUG) Pop Stack: updateBusinessMessage
2009.07.07 at 15:30:06:096: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateMsgError(3 params) Exit
2009.07.07 at 15:30:06:096: Thread-9: B2B - (DEBUG) DBContext commit: Enter
2009.07.07 at 15:30:06:096: Thread-9: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.07.07 at 15:30:06:096: Thread-9: B2B - (DEBUG) DBContext commit: Leave
2009.07.07 at 15:30:06:096: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.MessageHandler:deliverMessageToDestination Exit
2009.07.07 at 15:30:06:096: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:incomingRequest Exit
2009.07.07 at 15:30:06:096: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: processIncomingMessage setting seq numbers
2009.07.07 at 15:30:06:112: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Call Incoming Request Processor
2009.07.07 at 15:30:06:112: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:incomingRequest Enter
2009.07.07 at 15:30:06:112: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:incomingRequest TransportBindings created
2009.07.07 at 15:30:06:112: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:incomingRequest Create a Message Table Row for Request message with message state Continue Processing
2009.07.07 at 15:30:06:112: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
2009.07.07 at 15:30:06:112: Thread-9: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2009.07.07 at 15:30:06:112: Thread-9: BusinessLogicLayer - (DEBUG) Push Stack: queryExchangeProtocolRevision
2009.07.07 at 15:30:06:112: Thread-9: BusinessLogicLayer - (DEBUG) Pop Stack: queryExchangeProtocolRevision
2009.07.07 at 15:30:06:112: Thread-9: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2009.07.07 at 15:30:06:112: Thread-9: BusinessLogicLayer - (DEBUG) Push Stack: queryDocumentProtocolRevision
2009.07.07 at 15:30:06:112: Thread-9: BusinessLogicLayer - (DEBUG) Pop Stack: queryDocumentProtocolRevision
2009.07.07 at 15:30:06:112: Thread-9: BusinessLogicLayer - (ERROR) Error -: AIP-13115: Not in an active transaction
     at oracle.tip.repos.core.persistency.BaseObject.prologue(BaseObject.java:1408)
     at oracle.tip.repos.core.persistency.BaseObject.createObject(BaseObject.java:913)
     at oracle.tip.model.instance.DataStorage.create(DataStorage.java:794)
     at oracle.tip.adapter.b2b.message.MessageStorage.create(MessageStorage.java:145)
     at oracle.tip.adapter.b2b.msgproc.DbAccess.insertMsgTblRow(DbAccess.java:953)
     at oracle.tip.adapter.b2b.msgproc.Request.incomingRequest(Request.java:397)
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:2062)
     at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2574)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2444)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2399)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
     at java.lang.Thread.run(Thread.java:534)
2009.07.07 at 15:30:06:112: Thread-9: BusinessLogicLayer - (DEBUG) setRuntimeActiveandQuiescing()
2009.07.07 at 15:30:06:112: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage General Exception ERROR
Error repeats a few times.
Wire message stays in Processing status, Business message is errored and an exception message is created in ip_in_queue.
Both remote and host delivery channels have retry set to 1. Agreement was re-deployed + all B2B restared, but the problem remained.
Could anyone help with this? What could be wrong?
Thanks in advance.
Kind regards,
Wanda
PS. I've checked all threads that might have anything to do with this, but found nothing useful.

Hi Anuj,
thanks for taking the time to examine the file.
Answers to your questions:
1. Yes, this is the 1st time for B2B, but the EBS I'm trying to connect to is up and running for approx. 2 years (it's a test instance).
2. Patching was done by the customer's sysadmin, so I don't really have an overview on what and how he did. Result of opatch:
Installed Patch List:
=====================
1) Patch 8298731 applied on Sat Jun 13 09:23:42 CEST 2009
2) Patch 5907304 applied on Thu Jul 17 14:26:55 CEST 2008
3. In theory the sysadmin should have run it, but how could I double-check this?
I know he had problems while applying patch 8298731, but he said it was solved later. (Customer is using windows os, which is making a lot of troubles otherwise.)
Regarding IDC log there is no success. I've restared B2B at least 5 times plus once the database, but still nothing. In tip.properties:
oracle.tip.adapter.b2b.transportTrace = C:\APPS\OAS\ip\log/transport.trc
also I tried the following values:
C:\\APPS\\OAS\\ip\\log/transport.trc (since there is a similar entry: oracle.tip.LogDirectory = C:\\APPS\\OAS\\ip\\log)
C:\\\\\\\\\\\\\\\\APPS\\\\\\\\\\\\\\\\OAS\\\\\\\\\\\\\\\\ip\\\\\\\\\\\\\\\\log/transport.trc (this was commented before; maybe it comes from some default)
true (I had no other idea)
Result is the same for all the cases: b2b_idc_transport.log file is 0 bytes, but b2b_dc_transport.log has initial data+writes log when processing.
If I remove or comment the above line from tip.properties, then no transport log files are created.
I've updated the agreement to have B2B inbound for the internal delivery channel, re-deployed it and it worked fine -> transaction(s) appeared in IP_IN_QUEUE.
Changing it back to XML Gateway (and re-deploying) causes all original problems.
Regards,
Wanda

How Outbound XML Gateway works?

Hi All,
Could you please tell me the steps involved in achieving Outbound XML Gateway?
I have adopted the below steps but could not able to achieve it.
1). Created a DTD file as below
<!ELEMENT OrderDetails ( Header, ExtraInfo ) >
<!ELEMENT Header ( POHeaherID, Segment1, VendorID ) >
<!ELEMENT POHeaherID ( #PCDATA ) >
<!ELEMENT Segment1 ( #PCDATA ) >
<!ELEMENT VendorID ( #PCDATA ) >
<!ELEMENT ExtraInfo ( VendorSiteID, ShipToLocationID, BillToLocationID ) >
<!ELEMENT VendorSiteID ( #PCDATA ) >
<!ELEMENT ShipToLocationID ( #PCDATA ) >
<!ELEMENT BillToLocationID ( #PCDATA ) >
2). Created .xgm file using Oracle Message Designer with source as Database Table and target as above DTD file. I have done all the necessary level as well as element mapping while creating this .xgm file.
3). Loaded the .xgm file and DTD file in the file system using putty.
4). Created Trading Partner with trading partner type as Supplier.
Transaction Type = PO
Transaction Subtype = PRO
Standard Code = OAG
External Transaction Type = SOP
External Transaction Subtype = SOP
Direction = OUT
Connection/Hub = Direct
Protocol Type = SMTP
Username = Soumit
Password = soumit
Protocol Address = soumit.sarkar@*****.com
Source Trding Partner ocation Code = SS_STPLA
5). Created a PO and submitted it for approval but didin't get the XML file on my mail-id.
Please help me to solve this very issue.

Was there any clue on this

Error in XML Gateway Processing - java.lang.OutOfMemoryError

Hi All,
We have B2B Customizations for Processing Orders in our Applications .
While an Inbound Document(ORDERSTATUS Document) got processed in our Application, we could find the Document being errored out in XML gateway with the following errors:
(Note: Partners are on E2Open Gateway and we dont use Webmethods)
1) ORA-29532: Java call terminated by uncaught Java exception: java.lang.OutOfMemoryError- ECX_INBOUND_NEW.PROCESS_XML_DOC
2) ORA-29532: Java call terminated by uncaught Java exception: java.lang.OutOfMemoryError - ecx_utils.INITIALIZE:
The Error has occured only twice (one in the month of May and the other in June) and its not replicable.
We verified all the Trending aspects (If the Issue is due to XML Document content, Specific to a particular Partner etc).
But we didnt find any clue about the occurence of this error.
Kindly provide your views on the occurence of the error.
Thanks in Advance,
Mangala.

Hi Mangala,
This error comes when JVM runs out of memory. Few cause may be -
1. You are trying to operate on a very large file (comparing to your system's primary memory)
2. You are trying to parse an xml, use SAX parser for best performance
3. Your JVM_OPTIONS value is not sufficient
You may consider increasing your JVM_OPTIONS value to some appropriate limit.
Are you working with Matthew Sullivan/Richard's team?
Regards,
Anuj

Order Import after PO Inbound via XML Gateway Error

I am using Apps Adapter (11g) to connect to EBiz Suite 11.5.10. I am doing PO Inbound and using XML Gateway to create the sales order. Even though I am populating order type in <POTYPE> under the <POORDERHDR>, during order import, I keep getting the error that "please provide order type". Can you please let me know which xml tag I need to populate the order type.
Thanks
Shanthi

Following are some of the pros of using XML Gateway:
1) XML is being accepted and more and more technologies are moving towards XML, so that "seems" to a future ready solution
2) XML processing is real-time.
3) Most of the maps for universally accepted standards are seeded in Oracle.
4) You can use Oracle Supplier Network(Free service provided by Oracle) with your XML gateway to transmit/receive xml documents to a supplier who may or may not be accepting the format you are generating(e.g. if your PO is in OAG standard and your supplier is accepting cXML format, OSN takes care of translating your document)
You might want to consider these points while deciding the technology.
Nitin S. Darji

XML Gateway: Error while posting to a OTA URL

Hi
I am using the code in XML Gateway user guide for OTA Post over HTTPS. Am getting an IOException that i am unable to tunnel through the proxy.
The user guide code can be seen here : http://docs.oracle.com/cd/E18727_01/doc.121/e12954/T319774T319783.htm
But, when i use Chrome's REST Client and set the proxy to be same proxy as i use in the code above, I am getting a successful response.
Am unable to understand the difference between both.
The exception that i get is as below:
Exception = java.io.IOException: Unable to tunnel through proxy. Proxy returns "HTTP/1.1 504 Gateway Timeout"
Kindly help.
thanks
Kamal

Hi
I am using the code in XML Gateway user guide for OTA Post over HTTPS. Am getting an IOException that i am unable to tunnel through the proxy.
The user guide code can be seen here : http://docs.oracle.com/cd/E18727_01/doc.121/e12954/T319774T319783.htm
But, when i use Chrome's REST Client and set the proxy to be same proxy as i use in the code above, I am getting a successful response.
Am unable to understand the difference between both.
The exception that i get is as below:
Exception = java.io.IOException: Unable to tunnel through proxy. Proxy returns "HTTP/1.1 504 Gateway Timeout"
Kindly help.
thanks
Kamal

XML Gateway Outbound transaction error

Similar Messages

Maybe you are looking for