XML Header to be changed

Hi,
This is SAP generated File (File to File).
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_TARGET_F2F_XMLHEADER xmlns:ns1="ZSEC_OUTPUT">
     <Name>STEVENWAGH</Name>
      <age>25</age>
      <***>M</***>
</ns1:MT_TARGET_F2F_XMLHEADER>
But I need to change this like
<?xml version="1.0" encoding="UTF-8"?>
<ZSEC_OUTPUT>
     <Name>STEVENWAGH</Name>
      <age>25</age>
      <***>M</***>
</ZSEC_OUTPUT>
   How to do?
thx and Regards,
Ansar.

Hi Ansar,
Are you using any file content conversion in the File to File scenario ?
Is the xml you have provided is the output of the payload in your interface ?
If you want to pass plain xml file then dont use any file content conversion protocol in File adapter just use "File" as your protocol
Nanda

Similar Messages

Remove XML Header

I am developing a Java Servlet and would like to query the database multiple times. I have used OracleXMLQuery and an array to be able to run three separate queries. My problem is occuring in my returned XML Document. Each query comes back with a XML Header such as:
<?xml version = '1.0'?>
<Query_1>
<COL1>10</COL1>
</Query_1>
<?xml version = '1.0'?>
<Query_2>
<COL1>20</COL1>
</Query_2>
<?xml version = '1.0'?>
<Query_3>
<COL1>30</COL1>
</Query_3>
I have assigned the header separately and would just like to be able to turn off the generated header. My problem is coming when I am trying to use an applet and it does not like when it sees the XML header more than once. Any ideas or hints on how this can be done I would appreciate it.

Hello this did solve my issue. I have same issue infact. I used this xsl mapping as
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="no" omit-xml-declaration="yes"/>
</xsl:stylesheet>
But my output xml struıcture has broken. Should I do some changing in my xsl mapping and how ?
Regards,
Ceren.

XML header for WebServices (SOAP)

Hi all!
I have quite strange problem about XML header in SOAP message for WS. Usually I don't care about XML header in SOAP message, because so far I had no problems calling load of WS on different servers. Stnadard XML header that comes out looks like this (1.0 and UTF-8 are in single quotes): <?xml version='1.0' encoding='UTF-8'?>.
But this time, the webserver I'm trying to call accepts only double quotes, e.g. like this: <?xml version="1.0' encoding="UTF-8"?>, it doesn't understand single quotes at all and there is no way of changing it!
JDeveloper uses apache soap for standard and makes single quotes. I tried raw http call by wrapping all text into post method -> that works, so webservice is working.
I can't set anything except endpoint, parameters, method :(
How can I make call that uses double quotes?
Pseudo logic is like this:
Vector params = new Vector();
params.addElement(xxxx);
Call call=new Call("xxx", "xxx", params, xxx, Constants.NS_URI_SOAP_ENC);
Response response = call.invoke(endpointURL, "xxx");

Hacked Oracle (apache) classes and put right values in it.
It was hard coded string, who on earth could thought that :D

How do I make a JTable's header sorting actually change the actual table?

How do I make a JTable's header sorting actually change the actual table?
Currently, I'm using
table.setAutoCreateRowSorter(true);to allow the user to sort the table.
However, I want to be able to load something based on the selected row's index. The problem is that when the table is rearranged, the change appears to only be local, in other words, the actual table isn't changing.
For instance:
index 0 "A"
index 1 "B"
index 2 "C"
Sorted in reverse gives me
"C"
"B"
"A"
But C is still index 2 (instead of 0).
Thanks in advance.

Cross posted and answered in the Swing forum.
[http://forums.sun.com/thread.jspa?threadID=5353865]
I see this is not your first incidence of cross posting. In future, please post a question once only.
db

Create a new line in the xml-header structure.

Hi,
Can any one tell me how to create a new line in the xml-header structure.
I am doing a IDOC-XI-HTTP scenario.
Actually my mapping create this file:
<b><?xml version="1.0" encoding="utf-8"?>
<ORDERS05>
<IDOC BEGIN="1">
    <EDI_DC40 SEGMENT="1"> </b>
The result must look like this.
<b><?xml version="1.0" encoding="utf-8"?>
<ORDERS05>
<IDOC BEGIN="1">
    <EDI_DC40 SEGMENT="1"> </b>
Thanks and Regards,
Eren

Hi,
thanks for you quick answer.
I found a xsl script.
It works fine.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml" indent="yes"/>
   <xsl:template match="*">
      <xsl:param name="depth">0</xsl:param>
      
      <xsl:if test="$depth > 0">
         <xsl:text>    </xsl:text>
      </xsl:if>
      <xsl:text>
</xsl:text>
      <xsl:element name="{name(.)}">
         <xsl:for-each select="@*">
            <xsl:attribute name="{name(.)}"><xsl:value-of select="."/></xsl:attribute>
         </xsl:for-each>
         <xsl:apply-templates>
            <xsl:with-param name="depth" select="$depth + 1"/>
         </xsl:apply-templates>
      </xsl:element>
   </xsl:template>
</xsl:stylesheet>
Best regards
Eren

Purchase order reprints when entering header note in change mode

Hi All,
We want to use header note in PO as a worklog. PO should not print when a note is entered but whenever we enter any text in the header note in PO change mode, a change output gets triggered and the PO is getting printed. How can we avoid this?
Thanks
Deepthi

Hi Peter,
Thank you for the reply
We do have an entry for object EKKO, Text ID F02 for standard document type in operation 1 and 2. Do I have to remove an entry for operation 2 here?. If I remove it, Will it cause problem to other header texts i.e I do not want the PO print only when the header note have some changes. But it should print if any other header text is changed.
Thanks
Deepthi

Using external XML document to update / change text fields inside of published captivate output.

Hello
I currently have a project where the client has requested to have the ability to update the text fields inside the project at a later date.
This is due to the nature of the content changing rather rapidly, i would like to set this up so the client can manage this them selfs.
What would the best way to do this be?
I'm thinking XML, an external XML sheet were by Captivate imports the text from this XML sheet and then displays it within the specific text fields contained within the captivate output.
This way the client would just update the external XML document(cut and paste the text in) and then the text would be dynamically updated in the published Captivate document.
any help would be amazing !
Thanks in advance
Nick

Hi Lieve
But isn't this thread more about an end user having an ability to change text after the Captivate has been published and delivered? I could see where that might be useful if making changes then publishing to create a new output. But I'm interpreting that the situation here is that a Captivate project has been published and delivered, and some mechanism is desired that allows the recipient to modify an external XML file to influence changes in the already compiled Captivate output.
Cheers... Rick

Adding Encoding in XML header without mapping

Hi Gurus,
I am stuck in a situation where in a pass through scenario, I need to add encoding type in XML header.
Below is example -
Current Situation - <?xml version="1.0"?>
Expected result - <?xml version="1.0" encoding="UTF-8"?>
Can anybody help me in this regard? how to achieve this?
Regards
Vidhi S

Hi Vidhi
Use it in the below way in the receiver adapter.
Module name: AF_Modules/XMLAnonymizerBean
Parameter name: anonymizer.encoding
This will work. I have tested already.

Adding additional XML Header in Target XML structure

Hi all,
I have a requirement that i need add one additional XML header to target XML messages. At the moment i can see default XML header as ,
<?xml version="1.0" encoding="UTF-8" ?>
<Test>
<Add>Test Mesage</Add>
</Test>
But i would like to have one more additional header like below,
<?xml version="1.0" encoding="UTF-8" ?>
<?Siebel-Property-Set EscapeNames="false"?>
<Test>
<Add>Test Mesage</Add>
</Test>
Can some one help me to find a way to adding this additional header?
Thanks in advance.
Prasad Babu.

Hi Prasad,
Yes it is possible by Java Mapping. Please check my response for similar thread
Re: Add XML header?

XML header?

Hi experts,
I am generatig an xml file. I want to add FileID = "X123" before version="1.0" in the xml header.
For ex:
<?xml version="1.0" ?>
to
<?xml FileID="X123" Version="1.0">
Any idea?

NO. SAP XML parser are the tools created by SAP to work with XML.
Parsing XML
All modern browsers have a build-in XML parser that can be used to read and manipulate XML.
The parser reads XML into memory and converts it into an XML DOM object that can be accessed with JavaScript.
You will learn more about the XML DOM in the next chapter of this tutorial.
There are some differences between Microsoft's XML parser and the parsers used in other browsers. The Microsoft parser supports loading of both XML files and XML strings (text), while other browsers use separate parsers. However, all parsers contain functions to traverse XML trees, access, insert, and delete nodes (elements) and their attributes.
In this tutorial we will show you how to create scripts that will work in both Internet Explorer and other browsers.
Note: When we talk about parsing XML, we often use the term "Nodes" about XML elements.
In package SIXML you have the tools and examples for work with XML in an efficient way.

Encoding missing from XML header

I have to manipulate an XML document. Using Java 1.4.1, I build a Document object based on the XML file, manipulate the Document and output it as attached below.
The problem is that the xml header in the output does not contain the "encoding" information. I could of course manipulate the output afterwards, but it would not be a neat solution. Any ideas?
DOMSource domSource = new DOMSource(document);
StreamResult streamResult = new StreamResult(
new OutputStreamWriter(System.out , java.nio.charset.Charset.forName("UTF-8"))
TransformerFactory tf = TransformerFactory.newInstance();
Transformer serializer = tf.newTransformer();
serializer.transform(domSource, streamResult);

When you serialize your output to a Writer, the parser has no way to tell what encoding the Writer uses, so it's up to you to ensure that the parser knows what encoding the Writer is using. Otherwise it will not specify any encoding, essentially assuming the Writer is using either UTF-8 or UTF-16 encodings.
In your case you don't have a problem, because "no encoding" means that the document is encoded in UTF-8 or UTF-16; it's easy for a parser to examine the first few bytes of the file and tell which it is. Yours is encoded in UTF-8, so it's correct.

Automatic Price Redetermination when header data is changed

Hi All,
Scenario: Client is using customer condition group fields to maintain shipping method(VBAK-KVGR2) and freight terms(VBAK-KVGR3) in Sales Order Header. They have maintained condition records to calculate frieght charge for items. Requirement is whenever any of the above mentioned field is changed, freight condition has to redetermine automatically for the item.
Any help will be highly appreciated.
Regards
Srini

Hi Everyone,
As mentioned in your response, those steps are carried out already. When Sales Order is created for first time, the freight condition is calculated automatically using condition record and access sequence. Here the requirement, if Freight terms or Shipping method is changed later, the freight condition has to be redetermined automatically without manual price update. However I find an user-exit, which can redetermine the freight condition only when any of the line item details are changed.
I am not sure if there is any other user-exit available if header values are changed, the freight condition has to be redetermined.
Thanks for your response.
Regards,
Srini

How to keep track whether PO header has been changed

Hi,
I need to Display all the lines items of a Purchase Order whenever its header changes. If PO header has been changed, in which table this details are stored.
With Best Regards
Mamatha.B

I have gone through those tables. Whenever a change has been done to PO there is an entry in the CDHDR . When there is a change to both Header and Item. Is there any field which particularly specifies whether the change is in the Header or Item.
Thank you
With Best Regards
Mamatha.B

[svn:fx-trunk] 13383: Modify to include the xml header (with encoding) in the DITA xml files.

Revision: 13383
Revision: 13383
Author:   [email protected]
Date:     2010-01-08 12:04:00 -0800 (Fri, 08 Jan 2010)
Log Message:
Modify to include the xml header (with encoding) in the DITA xml files.
QE notes: None.
Doc notes: None
Reviewed By: Pete
Tests run: checkintests
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Thats good news.

How to change XML Header in file

Hi,
How to have the following XML output header XML with simple transformation:
<?xml version="1.0"> encording="ISO-8859-1"?>
When I used the following transformation template:
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
I get the following output header and file is not readable.
<?xml version="1.0" encoding="utf-16" ?>
If i call tranformation without encoding option file is creted and readable. Does there is any impact on functionality if file is without header.
Thanks
anya

Hi,
you could use the below alternative solution also as some Web services do not accept the message , if Content type is application/XML in the HTTP Header, it will accept only Text/XML. So While calling the Web service, the content has to be changed, This is possible using Module of the adapter as shown in the screen shot.
HTTP Header field values before using the module
User-Agent: SAP-Messaging-com.sap.aii.messaging/1.0505
content-id: [email protected]
content-type: application/xml
Content-Length: 1280
Module name - localejbs/AF_Modules/MessageTranspormationBean
Type - Local Enterprise Bean Module - This is defined by the user, but the same name should be given in the module configuration for passing the parameters. In this case transform In the module configuration ,
Module key - In this case transform
Parameter name - Transform.ContenType
Parameter Value - text/xml;charset=utf-8
Here you could use the required parameters and pass the values....:-))
Thanks
Swarup

XML Header to be changed

Similar Messages

Maybe you are looking for