XML import and Export

Hello,
could someone help me with this issue?
We had process chains in production, but not in development. We extracted the chain via XML and imported these in development.
It seems that it has collected all objects related to this chain. We are now at the point that we decide to remove the XML import out of the development system.
The question here is, what will happen if we do this?
I hope someone has the answer for this.
Kind regards,
Harald

well, this is what i've discovered so far
indesign footnotes don't live on the xml tree, so there's no way for them to be "tagged" as a footnote on import. from what i can tell, the easiest way to "automatically" create footnotes from n xml import is using the indesign scripting system. there are a few pdfs inside the indesign application folder and some samples - these are also available on the adobe website.
using scripting, you can create an xpath query to iterate over your footnote elements, then create an indesign footnote object at the same point in the text, copy the contents from the footnote element into the indesign footnote, then remove the footnote from the xml tree. or maybe just plonk it in a text frame living on a hidden layer or something. i haven't gotten that far yet.
i haven't got as far as exporting yet, but i reckon there could be a similar trick available via scripting. another option would be IDML, which definitely has footnotes tucked away in its pckage somewhere.
does anybody else have a better solution, or more light to shed on the matter?

Similar Messages

Footnotes and XML: import and export.

I've been playing around with ID CS4 for a week or two now, and can't seem to figure out a way to get footnotes into, or out of, an InDesign document using the XML import / export feature in the Structure pane. It seems you can't tag footnote text, which precludes it ever being "structured". I did notice the footnote is available when exporting as IDML, however.
Is there a way to manipulate footnotes from the document's structure / xml tree? I am working with DocBook sources, and need to find out a way to get footnotes marked up correctly in InDesign... this is proving to be a bit of an issue. Any help or reference pointers would be greatly appreciated.

well, this is what i've discovered so far
indesign footnotes don't live on the xml tree, so there's no way for them to be "tagged" as a footnote on import. from what i can tell, the easiest way to "automatically" create footnotes from n xml import is using the indesign scripting system. there are a few pdfs inside the indesign application folder and some samples - these are also available on the adobe website.
using scripting, you can create an xpath query to iterate over your footnote elements, then create an indesign footnote object at the same point in the text, copy the contents from the footnote element into the indesign footnote, then remove the footnote from the xml tree. or maybe just plonk it in a text frame living on a hidden layer or something. i haven't gotten that far yet.
i haven't got as far as exporting yet, but i reckon there could be a similar trick available via scripting. another option would be IDML, which definitely has footnotes tucked away in its pckage somewhere.
does anybody else have a better solution, or more light to shed on the matter?

Import and export xml file in Oracle

Hi Gurus,
Can any one explain , how can we Import and export an XML file in Oracle Please
Thanks

Some examples can be found on this {thread:id=410714} forum and also on [Marco's blog|http://www.liberidu.com/blog/] (He's an Oracle Ace in the {forum:id=34} forum)

Import and Export MDL error with OWB Release 2

Getting the following error when importing and exporting MDL - any assist would be appreciated - never had this issue with previous releases - error as follows:
Error occurred exporting metadata to file "C:\TEMP\MY_PROJECT-20061208_1058.mdl".
java.lang.Exception: CNV0002-0038(ERROR): Cannot write to file ./../../reposasst/converter.properties. Please make sure that write privileges are enabled or that disk is not full.

I got the solution. OWB writes some temporary xml files before importing/exporting mdl and these files are stored in OWB home directory. The problem is write privileges on the OWB Home directory. I am not local admin of my system. Admin installed the OWB client on my system through his userid. Now if i try to create a directory or file in OWB home directory it thorws an error "Access Denied". I got the Admin rights on my local system for my userid and now OWB is working fine.
Thanks.

The Projects screen to import and export SAP xApp Manufacturing Integration

Hello:
On my SAP Discovery Server, On the Projects screen to import and export SAP xApp Manufacturing Integration and Intelligence (SAP xMII) projects.
Under the projects listed I see one Default project, is listed as a System Project.
I did an import and used one of the sample application, along with the ExportManifest.xml file.
"You can create an external project structure, include it in a zip file, and import it as a new project. You do not need an ExportManifest.xml file to import a project."
Now I see two projects listed as System Projects, is that ok, would that cause any issues? Is there any way that I could correct this?
Note:
If you import a project that already exists, the system overwrites the current project structure and files.
You can import hidden projects that do not appear on the Projects screen or in the SAP xMII Workbench. System-defined projects may appear in the Projects screen and in the SAP xMII Workbench, but you cannot delete them. You can import a project with the same name as a hidden or system-defined project and overwrite its properties. If you do this, they are no longer considered to be hidden or system-defined projects.
Thank you,

You could consider creating a project and exporting it to see the proper format of the zip file, including the ExportManifest. You should find attributes in the xml for setting the description, system type, etc.

Importing and Exporting Data with a Clob datatype with HTML DB

I would like to know what to do and what to be aware of when Importing and Exporting data with a Clob Datatype with HTML DB?

Colin - what kind of import/export operation would that be, which pages are you referring to?
Scott

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

Problem with Import and Export Data Wizard

Downloaded and installed SQL Server Express 2008 R2 today because I want to explore how Access interacts with SQL Server (using my home computer). I'm using Access 2010 (under Windows 7), so the 2008 version of SQL Server Express seemed to be the version
to use.
After a couple of false starts, installation appeared to go okay. After the installation. My Start menu listed Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2. The latter listed Import and Export Data (64-bit). When I clicked that, the first Import
and Export Data Wizard page was displayed. I wasn't ready at that time to explore the wizard, so I closed it. An hour or so later I again attempted to open the Import and Export Data wizard. This time, the wizard didn't open. Instead this error message was
displayed: "The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered."
I found DTS.dll on my computer at C:\Program Files\Microsoft SQL Server\100\DTS\Binn, so the file is available, but don't know whether it is registered.
How can I correct this problem?

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

What is the best way to import and export footage from the 5D Mark II?

Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!

ascreenwriter wrote:
Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!
1. Follow the advice above. Also use the Media Browser to import the footage in case you have spanned media files. Import files with the Media Browser.
2. It largely depends on what you wish to ouput to: Blu-ray, web, etc. This FAQ gives the best answer: What are the best export settings?
3. Use the Replace with Adobe After Effects Composition function.

Looking for a program that can handel import and export of palm doc files

I am looking for a program that can handel the import and export of palm doc Files that can convert them to to either txt or RTF files for Vista 32, running Palm Desktop 7.1.
Could anyone give me a few suggestions of any plug-ins that would be good me?
Hearns
Post relates to: Palm IIIxe
This question was solved.
View Solution.

Ok, you need to clean uninstall Palm desktop 6.2. Install Palm desktop 4.1.4 and download and install documents to go version 6.
Here are the clean uninstall instructioins for Vista.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. Use the username that is on the handheld.

Error message when importing data using Import and export wizard

Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126

Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Import and Export in 4.6b

Hi All,
I have a syntax regarding Import and Export statements which are not working in 4.6b. Below is the statement.
IMPORT ID = (Internal Table) FROM DATA BUFFER ( String Variable ).
EXPORT ID = (Internal Table) TO DATA BUFFER ( String Variable ).
What can we have alternate to above statements ?
Actually I need to transfer or export some internal table content to String and Import the same data from string.
I am looking perticularly about buffer only. If not that what can we have alternate to that ?
Thanks,
Ram

Hi
You can try to use Field symbols also, for example
you need to code in the target program.
field-symbols <fs_itab> type standard table.
assign '(PROGRAMNAME)ITAB[]' TO <FS_ITAB>.
example, i did this in user exit
assign '(SAPMV50A)XLIPS[]' to <FS_ITAB>.
if <FS_ITAB> is assigned.
code will continue
make sure program name is in capital letters.
Regards
Madhan

Internal table with Import and Export

Hi All,
Hi all
Please let me know the use of <b>Internal table with Import and Export parameters and SET/GET parameters</b>, on what type of cases we can use these? Plese give me the syntax with some examples.
Please give me detailed analysis on the above.
Regards,
Prabhu

Hi Prabhakar,
There are three types of memories.
1. ABAP MEMORY
2. SAP MEMORY
3. EXTERNAL MEMORY.
1.we will use EXPORT/ IMPORT TO/ FROM MEMORY-ID when we want to transfer between ABAP memory
2. we will use GET PARAMETER ID/ SET PARAMETER ID to transfer between SAP MEMORY
3. we will use EXPORT/IMPORT TO/FROM SHARED BUFFER to transfer between external memory.
ABAP MEMORY : we can say that two reports in the same session will be in ABAP MEMORY
SAP MEMORY: TWO DIFFERENT SESSIONS WILL BE IN SAP MEMORY.
for ex: IF WE CALL TWO DIFFERENT TRANSACTIONS SE38, SE11
then they both are in SAP MEMORY.
EXTERNAL MEMORY: TWO different logons will be in EXTERNAL MEMORY.
<b>Syntax</b>
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
On a screen, you link fields to parameters in the Screen Painter. When you define the field attributes of an input field, you can enter the name of an SPA/GPA parameter in the Parameter ID field in the screen attributes. The SET parameter and GET parameter checkboxes allow you to specify whether the field should be filled from the corresponding SPA/GPA parameter in the PBO event, and whether the SPA/GPA parameter should be filled with the value from the screen in the PAI event.
When an input field is linked to an SPA/GPA parameter, it is initialized with the current value of the parameter each time the screen is displayed. This is the reason why fields on screens in the R/3 System often already contain values when you call them more than once.
When you call programs, you can use SPA/GPA parameters with no additional programming overhead if, for example, you need to fill obligatory fields on the initial screen of the called program. The system simply transfers the values from the parameters into the input fields of the called program.
However, you can control the contents of the parameters from your program by using the SET PARAMETER statement before the actual program call. This technique is particularly useful if you want to skip the initial screen of the called program and that screen contains obligatory fields.
Reading Data Objects from Memory
To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
Saving Data Objects in Memory
To read data objects from an ABAP program into ABAP memory, use the following statement:
Syntax
EXPORT <f1> [FROM <g 1>] <f 2> [FROM <g 2>] ... TO MEMORY ID <key>.
This statement stores the data objects specified in the list as a cluster in memory. If you do not use the option FROM <f i >, the data object <f i > is saved under its own name. If you use the FROM <g i > option, the data objet <g i > is saved under the name <f i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
Check this link.
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
Thanks,
Susmitha.
Reward points for helpful answers.

Is it possible to import and export dump between oracle 9 and oracle 11?

Is it possible to import and export dump between oracle 9 and oracle 11?
Source DB : Oracle 11g(unix0
Oracle client : Oracle 9(Windows)
Export import utility : Oracle 9's
Destination DB : oracle 9

I am getting the Following Error and export utility is not responding after this.
Export: Release 9.2.0.1.0 - Production on Thu Jul 15 14:37:01 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
server uses AL32UTF8 character set (possible charset conversion)

Import and export a root site in a site collection in sharepoint2010

Hi,
I have site-collection in sharepoint2010 i.e. http://test.com/ and i have subsites under it that looks like this http://test.com/HR,http://test.com/payroll etc..
root site in site-collection i.e. http://test.com/ has to be imported from other SharePoint farm but the subsite under it should not changes i mean the HR and Payroll
let me know how to import a root site from prod farm with out affecting the subsites or breaking the subsites..
if this is possible, please let me know the import and export commands without affecting the subsites
Thanks,
sarath.
Sarath Sannadi Sharepoint Dev at Saksoft

If you want to restore it root level in target farm then the Subsite under the site collection will not change.
you use Backup-SpSite
Backup-SPSite http://test.com -Path C:\Backup\site_name.bakand then in the target farm use Restore-SpsiteRestore-SPSite http://test.com -Path C:\Backup\site_name.bak -Forcechange the path accordingly.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

XML import and Export

Similar Messages

Maybe you are looking for