XML imported from iM '08 has a different aspect ratio in FCP 6?

I have the new canon vixia hg 21 which is avchd and FCP 6 isn't recognizing it. Using Imovie to recognize the files works fine, the problem is that when you export from imovie '08 into FCP via xml, it imports fine, but I get a display issue with black bars surrounding the footage, only in the canvas. It appears fine in the viewer and in it's own sequence in the timeline. But when you mix the different camera footage together, the other being the Canon XH A1, it appears as a different aspect ratio??? What the? and for the life of me, I've re imported using 16:9, no difference...I have no idea what's going on.
Any help would be greatly appreciated!

Found the answer, and pretty simple too....yeesh. just click on your clip and go to setting>conform to sequence.

Similar Messages

XML file from '08 has a different aspect ratio in FCP 6?

I have the new canon vixia hg 21 which is avchd and FCP 6 isn't recognizing it. Using Imovie to recognize the files works fine, the problem is that when you export from imovie '08 into FCP via xml, it imports fine, but I get a display issue with black bars surrounding the footage, only in the canvas. It appears fine in the viewer and in it's own sequence in the timeline. But when you mix the different camera footage together, the other being the Canon XH A1, it appears as a different aspect ratio??? What the? and for the life of me, I've re imported using 16:9, no difference...I have no idea what's going on.
Any help would be greatly appreciated!

You should really take this to the Final Cut Pro forum as the codecs and the interface is different for Final Cut Express.

Fixing different aspect ratios in FCP 4

I need help!!
I shot a wedding yesterday using 3 different cameras, all with different 16:9 aspect ratios. I used a panasonic, sony and cannon. The sony and cannon has the anamophic squeze while the panasonic has the letterbox outline. Is there a way to pull back and slap the footage shot with the sony and cannon in a letterbox frame to match the panasonic?
thanks in advance.

http://proappstuff.com/proapptipsvideotutorials/879F6B61-CFF9-4FD1-8D43-FDF89605 611A/6ECEC931-47F1-4BC1-8CD4-41FE4842B45D.html
That might answer it for you.
CaptM

Does LR handle a dual monitor setup with different aspect ratios (16:9 and 16:10)?

Does LR 5 handle a dual monitor setup with different aspect ratios (16:9 and 16:10)?
I'm planing to buy a 27" 16:9 monitor and use it as primary together with a 22" 16:10. Does any have any idea?
Thanks

Moreover, the two monitors can have completely different characteristics. As always, you really need to calibrate/profile any monitor (with a hardware tool - Spyder, Colormunki etc). That's no more important with two monitors, but you see for sure if you don't, as two dissimilar monitors will then probably look different.

Multiclip with different aspect ratio

I'm noticing that when I try to do a multiclip with a movie format that involves a different aspect ratio than DV I lose the ability to view live multiclip angles. I've tried several formats and it doesn't appear to be codec related. If the aspect ratio of the sequence is 4:3 or 16:9(natively, not anamorphically), the options from the RT menu disappear including the "Multiclip playback" option, and even without putting it into a sequence it won't play back in the Viewer.
I'm making offline JPEG versions of some HD footage which is 16:9, and I guess I can just make anamorphic versions to work with, but that seems highly unnecessary. Am I reading this problem correctly and if so is there any reason for it or is it a bug?

I'm multiclipping 4 angles, they're photo jpeg movies as made by Compressor's JPEG 75 NTSC setting but resized to 640x360 with square pixels. The material is located on an external firewire drive. From the same source I'm still able to play 6 or 7 standard-def NTSC DV files as multiclip angles just fine.

Canvas & Viewer displaying different Aspect Ratios

Same footage. Original footage in viewer displaying in Letter Box in a 4:3 black area (and appearing much larger). Same footage from Timeline showing in Canvas as 16x9 black area (but not filling the entire canvas). Both are at 100%. I have tried to arrange back to defaults..no avail...Just for clarity..the viewer and the canvas are displaying/formatted for different aspect ratios. They should be the same. how do I fix it?

The viewer will show the footage in the format it was shot in. The canvas will reflect the footage as it will show up in the timeline based on the settings of the sequence.
My guess is that the sequence settings are set to anamorphic or some sort of 16:9 while what you actually shot is letterboxed.
Did you shoot squeeze or letterbox?
CaptM

How do I batch resize images with different aspect ratios?

How do I batch resize images with different aspect ratios?

poa66 wrote:
Landscape: I want result to be 1960 x 1103 px and 72 ppi whether the original is 300 ppi or 220 ppi and wether it is 2Mb or 10 Mb. Cropped centered top and bottom.
There will be a set of Landscapes that that have a narrower aspect ratio the 1960:1103 that would also need the top and bottom cropped like all Portraits would could be. You need to realize that center cropping Landscape image that have aspect ratios near 1960:1103 will usually produce acceptable compositions. However Cropping wide panoramas and portraits will only produce acceptable landscape 1960:1103 composition occasionally.
Here you will see what happens when image have aspect ratio the do not fit the desired aspect ratio. Where Landscape are forced to portrait and portrait forced to Landscape. Here are two Collage I populated with a mixture of image with different aspect ratios. One collage has all 3:2 Landscape places and the other 2:3 Portrait places.
I create a 1 image 1960x1103 collage 72dpi and create those too. Note the landscape boy foot is cropped off 3:2 is narrow compared to 1960:1103

How can i export a series of images in different aspect ratios to the same height

How can i export a series of images in different aspect ratios to the same height?
I wish to make a slider callery for my website. all the images need to be 750 Pixels high, the width does not matter. I have a mixture of square pandscap and protraite images can i do thing as one export or do i have to do it twice? Once for long edge and once for shot edge?
Thanks

Yes, you can but there is a trick to it.
In the Export Dialog under <Image Sizing> select Widdth & Height.
Then enter 750 pixels for Height.
Put your cursor into the Width field behind all the numbers that appear there and with the backspace key delete the numbers. If you enter "0" it will not accept that. But it accepts when you just delete the field for Width with the backspace key. The Width field will now be just blank.
When you then export all image will have a height of 750 pixels and the width will fall variously according to thne height / width ratio.
Or alternatively you can enter 7.5" for height at a resolution of 100 ppi.

Different aspect ratios

So how do you treat your different aspect ratios now we have iphone 4, 5 and 6 all different sizes?
Do you build for 4 and then have extra space and backgrounds for 5 and 6, or do you adjust your app based on the different resoltuons by detecting the res and auto adjusting and moving things?

The answer is it's up to you. What you're asking about is a design principle called 'Fluid Layout' or 'Responsive Layout'. The idea is to design your UI so it responds to the different resolutions and/or aspect ratios of the screen it's on.
Fluid layout is the term when the app continuously adjusts itself as the window is resize ( this is more of a desktop approach since mobile is on a fixed screen size ).
Responsive layout is when the UI jumps to a specific state when dimensional threshholds are reached. So you could have 4 different layouts ( Mobile, Tablet, Desktop, Extended Desktop ) that the app can switch among depending on the screen size dimensions. In your case you may want to take the mobile layout and break it up into aspect ratios.
Responsive layout is more easy to program and recommended for people new to the principle since it's easier to think of set states instead of constant flow. But Fluid Layout is the best solution if your an advanced developer because you never have to go back in and create a new state to support new devices. The layout is always perfect no matter the screen.
How it works programmatically you usually have a listener, very high up in the program, that watches for the stage resizing and then calls a function that tells the UI to realign itself and go through all the children so they know to realign themselves. In your case you could just run that on launch because your screen size should never adjust. In some cases you should update the children first then the parents.
Hope this helps.

Running fullscreen on monitors with different aspect ratios

I am trying to run a program in fullscreen on a projector. It works fine on my computer, but the background image appears stretched when I run it on a projector with a different aspect ratio. How can I run it as to prevent this?
This is how the code looks:
@Override
     public void start(Stage primaryStage)
          this.PrimaryStage = primaryStage;
          this.PrimaryStage.setFullScreen(true);
          ......which runs with this CSS file:
#background{
    -fx-background-image: url("background-full.png");
    -fx-background-repeat: stretch;
    -fx-background-position: center center;
    -fx-background-size: auto 100%;
    -fx-background-color: black;
}

Don't stretch the repeat
-fx-background-repeat: no-repeat;
AND
-fx-background-size: cover;
Scale the image, while preserving its intrinsic aspect ratio (if any), to the smallest size such that both its width and its height can completely cover the background positioning area.
Or
-fx-background-size: contain;
Scale the image, while preserving its intrinsic aspect ratio (if any), to the largest size such that both its width and its height can fit inside the background positioning area.
Contain will provide a kind of letter box effect like watching an old 4:3 tv show a widescreen 16:9 TV.
Cover will fill the screen with the image bug clip some of the image if the screen and image aspect ratios don't match.

Export to XML / import from xml

I would like to save my data (from various tables) in an XML document, and later re-import it to the database.
I am using Oracle 8.0. What are my best option? I saw there's a PL/SQL demo package DBXML on this site. But is there something that does the opposite direction (i.e., the import part)?

OTN has a sample app that might interest you:
XML Flight Finder queries the database and converts the result set to an XML document. It also takes input from a user, converts it to XML, then writes it to the database.
Regards,
-rh

Iphoto 6.0.6 -now when importing from the camera has slowed considerably, 23 photos took 1 hour during the finishing stage

Slow importing from camera, at the finsihing stage. Took 1 hour for 23 pics

How big is your HD? How much free space on it?

Motion import from Cinema 4D has shaky camera keyframes

I exported a scene from cinema 4d into motion using the export 3d data function, in cinema 4d I used very little keyframes a total of 4, 2 in the beginning for position and rotation and 2 at the end for the same.
When I bring it into Motion is converts the camera move into a tons of keyframes, but when when I playback with a dropzone added I get a very shaky camera, which is obvious with the dropzone and not the footage and passes since they were rendered out in cinema and they rendered out smoothly.
Is there a trick to get clean keyframe import from cinema that I am missing?
Thank you in advance.
Deyson

Deyson wrote:
My dream would be for Blender 3D to incorporate with Motion
Request it in the Motion feedback pages...
Patrick

How to properly import footage with a different aspect ratio?

My main composition has the following specs:
Dimensions: 1280x720
Pixel Aspect Ratio: Square Pixels
Frame Rate: 29.97
The footage I'm trying to import has these specs:
Dimensions: 720x576
Pixel Aspect Ratio: D1/DV PAL (1.09)
Frame Rate: 25
Right now, when I place the footage in the comp, the edges are fairly jagged. I assume there's some weird pixel aspect ratio thing that's going on, but just not sure how to get it right.

You have more than the aspect ratio problem going on. There is a frame rate mismatch. There is a very big problem of scale as well.
You can't expect to have as sharp an image as the original if you scale the layer to fit inside the comp side-to-side. There is a third-party plugin called Instant HD from Red Giant software that can HELP -- it won't CURE the problem of too few pixels.
You also need to change the frame rate of the footage to 29.97. AE's Time Warp can help with that. If your need to have an extremely good-looking frame rate conversion is critical, you'd again have to get third-party frame rate conversion software like Magic Bullet or Twixtor.

TV Shows from iTunes in different aspect ratios

I bought the first series of LOST from the iTunes store, and all of these episodes are the same aspect ratio, and with my Apple TV they fit the TV screen well. I bought season two, and the first episode is the same aspect ratio, although the next episodes are displayed in a squarer format. Is this something I need to change to get them to display in the same way as the first series, or is it just how they come from the iTunes store?
It's a bit annoying to have them with two black bars at each side, although I don't know if it's an iTunes setting issue, or the format of the videos themselves. It's strange that the first episode is one format, although the next appear to be different.
Any help or advice would be great!

I heard back from iTunes store who added the series to my account so I could download it again. They noted that the second and third episodes were the wrong aspect ratio. I re-downloaded the episodes, but they are the same. They've said that it will be corrected in the future.

XML imported from iM '08 has a different aspect ratio in FCP 6?

Similar Messages

Maybe you are looking for