XML.load specific port

Hi,
I'm trying to load an xml file from
http://127.0.0.1:8080/foo --
but it seems that the port is stripped from the call. Is that so?
The target is FL2 on a Nokia 6630, but I've only access to the
emulator (Flash 8) right now.
I get the following trace output:
Problem loading URL (
http://127.0.0.1/foo). [from the
emulator]
Connection failed:
http://127.0.0.1:8080/foo [my
own trace output of the host address]
The browser has no problem loading the URL. I've looked in
the FL2 API ref docs but didn't find any mention of ports being
unavailable.
Any suggestions?
Regards,
Martin

Hi Martin.
I just finished running after this issue as well. I can only
confirm your findings.
- Both XML.load() and LoadVars.load() request seem remove any
:Port reference from the requested URI.
- The request
http://127.0.0.1:9090/anthing
actually is caught at 127.0.0.1:80
- When I change publish setting to Flash Player 8, the ports
are interpreted correctly, and the request is sent to :9090.
On the upside - this seems to be true only for the PC
environment. The ports are interpreted properly on my phone (Nokia
N70).
On the upside

Similar Messages

Network ACL for two specific ports

As far as I can tell there is no way to set Network ACLs such that only two specific ports are available. I'm using Oracle 11gR2.
I'd like a HTTP port and an SMTP port open for the local loopback address. These are ports 7777 and 25. It's my understanding that you can have only one ACL per host. While it seems you can create more, any additional ACL's for the same host don't always work as expected. So does anyone have any advice as how I can do this? I'd rather not have every port between 7777 and 25 available but this is what I currently have...
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL(
acl => 'local_loopback.xml'
, host => '127.0.0.1'
, lower_port => 25
, upper_port => 7777
);

Billy Verreynne wrote:
As far as I can tell there is no way to set Network ACLs such that only two specific ports are available. I'm using Oracle 11gR2.>Not so in my experience. An ACL can be for a specific target, but contain multiple ports for that target.
E.g. I assign ports 80, 7777, 8080, and a few others, in a single web-acl.xml, to a network target (host or domain).
Read the usage notes in Oracle® Database PL/SQL Packages and Types Reference.>Thanks I'll try that. I think we had problems in the past with separate ACL's containing rules for the same host, the response we got back from support was not to do that. This way didn't occur to me.

Error using XML Loader: XML not well-formed

Hi all,
I am facing a problem using the XML loader in xMII 12.0 when trying to load the following XML file:
<?xml version="1.0" encoding="UTF-8"?>
<Users>
<User>
    <UserID>IMXOO</UserID>
    <CWID>IMXOO</CWID>
    <Prename>Michael</Prename>
    <Surname>Otto</Surname>
    <CreatedOn>2001-12-31T12:00:00</CreatedOn>
    <CreatedBy>IMXOO</CreatedBy>
</User>
</Users>
I also tried a most basic XML file which shows the same error:
<?xml version="1.0"?>
<ausgabe>
<anzeige>Testausgabe</ausgabe>
</ausgabe>
To my understanding both files are well-formed, however xMII shows the error:
"The markup in the document following the root element must be well-formed."
Do I break any rules concerning the markup? IE loads the files without showing any errors.
Best Regards
Michael

Jeremy,
again you gave the key to the solution. When the error occured, I have set up the following path within the xMII workbench:
"Catalog-Tab"
<server>
  > Sandbox
        > XML
            myFile.xml
When I tried to load the mxFile.xml with the XML Loader, I got the error described above (XML not well-formed). I also cannot drag the file into a transaction in the workbench. I have manually configured the XML Loader with "http://<server:port>/XMII/CM/Sandbox/XML/mxFile".
Now using your hint I have changed to the "Web-Tab":
"Web-Tab"
<server>
    > Sandbox
        > WEB
            > XML
                myFile.xml
Then all works fine, when I now drag the file into the transaction. As you described, an XML Loader action is created with configuration "db://Sandbox/WEB/XML/myFile.xml" and the XML is loaded correctly.
Thanks for your help!
Best regards
Michael

XML loading failed

DB: Oracle Database 10g Release 10.2.0.4.0 - Production
ApEx: 3.1.2.00.02
IAS: 10.1.2.3
OS server: Windows 2003 SP1
OS client: Windows XP
IE: 6
Here's the problem:
When I run an ApEx application (e.g. the shipped sample application) items that use XML are not displayed correctly.
This results in two issues:
1)
Flash charts are not displayed. Instead of displaying the chart the text XML loading failed is displayed.
2)
Interactive reports generate a javascript error when I click on a column heading. The ajax-loader image is displayed, but nothing happens. Javascripterror at line 2, character 15193, Unterminated string constant.
The weird thing is that sometimes the issues are solved after a few browser refreshes (F5). Then everything works fine until the database is bounced again.
I tried to follow the link that should provide the XML for the chart
([http://nldev003/pls/apex/apex_util.flash?p=100:1:4337825341367752:FLOW_FLASH_CHART_R300851420764386117_en-us]).
This results in an empty page, source:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=utf-8"></HEAD>
<BODY></BODY></HTML>
I'm not using single sign on or reverse proxy.
All software is installed as described in the install guides.
Any ideas?
Thanks in advance.

Iloon,
ApEx generates the correct host: http://nldev003/pls/apex/...
I use port 80, so no port is displayed.
I also tried to append the domain to the servername, but this changed noting.
Again the following HTML code is returned by the apex_util.flash procedure.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=utf-8"></HEAD>
<BODY></BODY></HTML>
So I do get response from the server, but it's incorrect.
There should be XML content, no HTML.
Kind regards

Partial xml load

Is it possible to load specific xml nodes instead of loading
the entire file ?

No.
Remove '_spamkiller_' to mail

How do I script SWF files instead of JPG files in XML loader?

I have a SWF loader (greensock.com platform) and a thumbnail image scroll underneath it made of small image buttons. Each image button has a link which loads a new SWF file into the SWF loader above. Here is the code for each button which loads the bigger SWF file into the loader above:
Button3.addEventListener(MouseEvent.CLICK, Button3_PlayPopUp);
function Button3_PlayPopUp(event:MouseEvent): void {
    //setting the sourceVar
    sourceVar="3.swf";
    //making the SWFLoader load
    //as setting the soureVar after the SWFLoader is created won't do anything unlesss
    //I also re-create the SWFLoader with the new sourceVar when the button is clicked
    loader_howToLoader2.url = sourceVar;
    loader_howToLoader2.load(true);
Then I decided to load all button via XML loader. I followed the tutorial on XML loaders which deals with loading jpg images and assigning URL links to them in the following manner first in XML file:
<image src="appThmb_imgs/appThmb_imgs117x175/A-illuminatorUpLit_117x175.jpg" title="UpDownGlowingVase" url="http://www.888acolyte.com"/>
and then in AS3 like this:
var xmlLoader:URLLoader = new URLLoader();
thisOne.link = imageList[item].attribute("url");
function clickScrollerItem(e:MouseEvent):void {
//trace("clicked item " + e.currentTarget.itemNum + " - visit url: " + e.currentTarget.link);
var urlRequest:URLRequest = new URLRequest(e.currentTarget.link);
try {
navigateToURL(urlRequest);
catch (e:Error) {
// handle error here
trace(e);
My question is: How do I apply the code to each individual small thumbnail button to load a bigger image into the SWF loader above? Do I have to add something to XML file or this way it will never work with jpg images? Can url in XML file set the source var (//setting the sourceVar), since they are all individual and then somehow apply the making SWL loader to load part (//making the SWFLoader load) as a standard somewhere in the AS3 code?

O.K. Here is my COMPLETE function.
xmlLoader.addEventListener(Event.COMPLETE, LoadXML);
function LoadXML(e:Event):void {
    trace("xml load complete");
    xmlData = new XML(e.target.data);
    //trace(xmlData.image); //we'll see each image xml element listed in the output panel with this xmlList
    buildScroller(xmlData.image); //rather than trace the xmlList, we send it to our buildScroller function
//build scroller from xml
function buildScroller(imageList:XMLList):void{
    trace("build Scroller");
    //var scroller_x:int=0;
    for (var item:uint = 0; item<imageList.length();item++) {
        var thisOne:MovieClip = new MovieClip();
        //thisOne.img_width=imageList[item].attribute("width");
        //outline
        var blackBox:Sprite = new Sprite();
        blackBox.graphics.beginFill(0xFFFFFF);
        blackBox.graphics.drawRect(-1, -1, 86, 128);//-1,-1 places rectangle 1px left and up.86, 128 draws rectangle 1px wider on all sides of placed image dimenstions of 84x126
        thisOne.addChild(blackBox);
        //scroller_x += thisOne.img_width + 20;
        //var currentX = currentImageWidth+spaceBetween;//modified line to adjust variable thumb widths
        thisOne.x = (84 + padding) *item;//84 is the width of the loaded images and 15 (which was before paddign var) is the padding
        //thisOne.x = scroller_x;//modified line to adjust variable thumb widths
        thisOne.itemNum = item;
        thisOne.title = imageList[item].attribute("title");
        thisOne.link = imageList[item].attribute("url");
        thisOne.src = imageList[item].attribute("src");
        thisOne.alpha = 0;//makes all thumb images at alpha=0 before they are fully loaded
        //trace(thisOne.itemNum, thisOne.title, thisOne.link, thisOne.src);
        //Loading and Adding the Images
        //image container
        var thisThumb:MovieClip = new MovieClip();
        //add image
        var ldr:Loader = new Loader();
        //var url:String = imageList[item].attribute("src");
        var urlReq:URLRequest = new URLRequest(thisOne.src);
        trace("loading thumbnail "+item+" into Scroller: " + thisOne.src);//url
        ldr.load(urlReq);
        //assign event listeners for Loader
        ldr.contentLoaderInfo.addEventListener(Event.COMPLETE,completeHandler);//tells us when the loading is complete
        ldr.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, errorHandler);//tells us if there are any typo errors when the loading is complete
        thisThumb.addChild(ldr);
        thisOne.addChild(thisThumb);
        //create listeners for this thumb
        thisOne.buttonMode = true;//makes boxes act as buttons
        thisOne.addEventListener(MouseEvent.CLICK, clickScrollerItem);//makes boxes act as buttons
        thisOne.addEventListener(MouseEvent.MOUSE_OVER, overScrollerItem);//traces the title when the mouse is over the bounding box in the Output Panel
        thisOne.addEventListener(MouseEvent.MOUSE_OUT, outScrollerItem);//traces the title when the mouse is out the bounding box in the Output Panel
        //add item
        scroller.addChild(thisOne);
But I am not sure if I expressed myself clearly. All what you have indicated happens. Images are being loaded and url strings are working. I can not figure out how to tweek the code so instead of url specified in xml file I can load swf image into the SWF loader on the same screen?

HT204406 Is there a way to down load specific, individual songs on my iphone 5 or ipad 2, through iTunes Match, rather than having to download the entire album in the Cloud?

Is there a way to down load specific, individual songs on my iphone 5 or ipad 2, through iTunes Match, rather than having to download the entire album in the Cloud?

Begin by tapping on the Settings app.
Scroll to the Store menu and tap that.
This is where you can manage your Automatic Download settings. You can control Music, Apps, and Books (if you have the iBooks app installed) here. Slide to On any of the kinds of files you want iCloud to automatically download to your device.

How to choose a specific port via Palimpsest?

I found out today that Palimpsest Disk Utility can access remote harddrives via the SSH protocol. But Im not running SSH on my server via port 22. How do I choose a specific port?

galo,
willkommen zu den Apple Diskussionen.
You don't state which version of Keynote you're using. Keynote 3 offers an option to restart the presentation after an inactivity of x min (at least 1 min).
Look at Document inspector on the Document tab.
In German: Klick im Informationen-Fenster auf das weiße Blatt und ggf. den Dokument-Button. Dort findest Du:
Präsentation als Endlosschleife
Präsentation neu starten nach Inaktivität von
Viel Erfolg.
If this information is useful to you, please mark it as "helpful" or "solved" using the little buttons in the titlebar of this message. Thank you.
PowerBook G4 17", 1GB Mac OS X (10.4.7) iMac G5 20"; iPod 3G, iPod Shuffle, iSight

WRT54G: How do I limit access to specific ports, only to local IP's

Using a WRT54G with Windows XP, and I've setup a web server that I'm still testing. Until I understand the security better, I want to limit access from outside IP's to the port that it's running on, but NOT limit access from the outside to services running on other ports. Is there a way to block a range of IP addresses (or conversely, only permit access for a limited range of IP addresses) to a specific port? So for example (assuming server's on Port 99, and IP address to the outside world is 99.99.99.99: Port 99: Blocked IP Range: 0.0.0.0-99.99.99.98, and 99.99.99.100-255.255.255.255 - OR Port 99: Allowed IP Range: 99.99.99.99 Alternatively, I would be interested to permit access to the web server port, only for certain MAC addresses. Is this pretty secure, and if so, how can this be done? I've poked around the router settings and spent a good deal of time researching this; any help would be greatly appreciated...

Why do you want to block IP addresses: "IP Range: 0.0.0.0-99.99.99.98, and 99.99.99.100-255.255.255.255" ?   This is everybody on the web, except your router!    If you really want to block all these people, just unplug your router from your Internet connection. That is a block that cannot be hacked!
Normally a server is assigned a fixed LAN IP address. This address must be outside the DHCP server range of your router, and it cannot end in 0, 1, or 255.
Next you forward a port (for example, 99) to the server's fixed LAN IP address.
Data arriving at the Internet port of your WRT54G for port 99 will then be forwarded to your server. If you have other Internet services (i.e. server B) running on port 1297, then data that arrives at the Internet port of your WRT54G for port 1297 will be directed to server B.   Assuming that you only have port 99 and port 1297 open, then any other unrequested data (for any other port) that arrives at the Internet port of your WRT54G will simply be ignored (and thereby blocked).    If you connect another computer to a LAN port of the WRT54G, connect to the Internet, and request data, then when that data arrives at the Internet port of the WRT54G, it will be allowed to pass, and it will be routed to your computer.
In summary, by default, all router ports are closed. The only way to get data through the router is either to open a port (using port forwarding, or alternatively, the UPnP function), or for someone (or some program) on the LAN to request data from the web.
The router cannot limit the use of a port by MAC address.    When you open a port on your router, you are opening your server to invasion from anyone on the Internet. So, your server must be setup to protect itself.   Rather than limiting server use by MAC address (which can be faked), your server should be setup to require a user name and password.

Data Services Fix Pack 12.2.1.2 issued to resolve XML loader problem

We've had a few customers contacting us about the following error message:
"The message type for datastore <my_ds> has not been set". Please notify Customer Support"
Note that the text "<my_ds> will be the name of the XML loader you have in your dataflow. This error occurs when you are adding a new loader to a dataflow that is an XML type.
The customers that have reported this issue were all building real-time jobs and the loader type was XML Message Target.
In order to address this issue you will need to download and install the latest update which is 12.2.1.2. The above issue was introduced in 12.2.1.1 (3.2 SP1). You will ONLY have to install the client components (Designer) in order to address this issue. no updates are necessary to the server side of the application to address this problem.
An SAP Note has also been written up on this issue: [1423045|https://bosap-support.wdf.sap.corp/sap/support/notes/1423045]
Thanks,
Ryan

there is a connection timeout when trying to contact the laptop.the last lines it shows are:
PCI: setting IRQ 0 as level-triggered
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda: DMA, hdb:pio
ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc: pio, hdd: pio
hda: IC25N060ATMR04-0, ATA DISK drive

XML Load Document in EXE does not run

LV 8.0 (or 8.01).
This has got to be a trivial installation problem. I wrote a simple VI that reads in an XML file using the XML Load Document vi. It runs like a charm. I then built an exe. Loading the exe results in the following set of errors:
Unable to Locate Component
This application has failed to start because xerces-c_2_2_0.dll was not found. Re-installing the application may fix this problem.
This is then followed by:
LabVIEW: Resource File not found
The file 'DOMUserDefRef.dll' is not a valid LabVIEW file
As it turns out, I just received my 8.01 CDs, so why not? I installed the upgrade, repaired the internet toolkit, sprinkled some distilled water on my keyboard, but the problem did not go away. I then un-installed ALL of LabView, re-installed 8.00, did the hokey pokey, problem is still there.
Am I missing some vital step? If so, I would love to find out where this is documented.
I've reduced the problem to just having the XML Load Document vi connected to the Close Reference VI. See the attached VI.
Thanks,
fredb.
Attachments:
XMLBug.vi ‏13 KB

Hi Casey;
The XML Load Document is part of the XML ToolKit - that comes with the Internet Toolkit from NI. I'm not sure how I can post NI's toolkits here. They are available in the Toolkit CD (part of the Professional Suite). (I tried to get a screen shot in here - can't even do that!).
I'll attach a sample XML Doc I've created. It is created by parsing the LVPROJ file in order to find all the dynamic VI's. I'll build one based on a very simple demo project and attach it here. I was able to parse most of it by using the get tag method, but when I went to use the get value - that would always return a blank string - so I gave up, found an example using the internet toolkit - and off I went.
I do have a workaround (not too elegant) - I create a simple text file each time I write the XML file. I then read the txt file from within the EXE.
Thanks for looking into this. I did get a pointer from my excellent field engineer (Lesley Yu) who suggested I take a look at...
http://digital.ni.com/public.nsf/websearch/694A29DC644542BC86256E29007CCAC1?OpenDocument
This recommends I explicitly register the dll. I have not had a chance to try this. I did completely uninstall LV and re-install it. That wasn't it.
Thanks again,
fredb.
Attachments:
Demo.zip ‏1 KB

InDesign CS3 Server - Support for Standard ECMA-357, ECMAScript for XML (E4X) Specification

Does InDesign CS3 Server fully support the XML standards outlined by ECMA in 'Standard ECMA-357 ECMAScript for XML (E4X) Specification'?
http://www.ecma-international.org/publications/standards/Ecma-357.htm

Thanks Michael, for your prompt reply.
I can see that some of the XML library/functions are available in the ExtendScript Editor - but I just wanted to make sure that I'm not missing something.
Thanks again,
Carl

How do I ping a specific port (from a specific por...

Does anyone know of any software that will allow me to measure the bandwidth/throughput/travel time/etc of packets from a specific port to a specific port on another network? Ping gives the travel time, but doesn't allow specified ports. Iperf allows you to specify the port you connect to, but not the port you connect from. Wireshark doesn't send packets, though I think it does record traffic by port. Pathping is the same as ping in that it doesn't "do" ports & neither does tracert (and ping/pathping/tracert traffic may well be blocked where normal traffic isn't). So, does anyone have any ideas (or is friendly with their comapny's network admin)?

Llama8
did a quick google and came up with this:-
http://www.elifulkerson.com/projects/tcping.php
seems to do the trick but not sure you can specify the source port on the pinging machine
its a start though
Never tried this so caveat emptor
banz

Making a call over HTTPS with LoadVars, XML.load(), and WebService - Yes or No?

Hello, do LoadVars, XML.load(), or WebService support HTTPS-based endpoints, Yes or No?
BACKGROUND
============
I've been trying to get a LoadVars to actually make a call to an HTTPS endpoint. There is nothing in the documentation that says it can't. I know that there's also XML.load() and WebService class, but from the looks of it they don't do HTTPS.
During my tests I have absolutely no issues with making calls to the same service over HTTP. When I change it to HTTPS I don't see HTTPStatus or even failures. Also, netstat on my server will show a connection being established with the endpoint when using HTTP but not when using HTTPS. I've also tried setting SSLVerifyCertificate to "false" in my Server.xml and after a restart of AMS it doesn't help, same symptom.
I've also googled and looked through all Adobe forum posts that I can find:
https://forums.adobe.com/message/4938426#4938426
https://forums.adobe.com/thread/1661461
https://forums.adobe.com/thread/782037
https://forums.adobe.com/message/74981
https://forums.adobe.com/message/5107735#5107735
https://forums.adobe.com/message/7815#7815
https://forums.adobe.com/message/53870#53870
https://forums.adobe.com/message/87797#87797
WebService Class - http://stackoverflow.com/questions/5619776/webservice-and-fms
The best I found from the posts above is a non-commital answer from adobe staff at https://forums.adobe.com/message/4938426#4938426 and a 3rd party person saying that Webservice doesn't work at http://stackoverflow.com/questions/5619776/webservice-and-fms.
All I need is an official supported/not-supported from the Adobe staff. Shouldn't be to hard after 5 years or so of ignoring the questions in the forum right?

Adobe, please provide some details to your current and possibly potential customers, in at least one of the many unanswered posts about making HTTPS requests from AMS.
P.S.
realeyes_jun,
RealEyes Media has been an inspiration to me for many years, and I would like to thank them for their efforts to better the media streaming community.
Also, would it be possible to please release the source to REDbug?

XML loader and UTF-16 - throws Content is not allowed in prolog

Hi,
Our ECC system is updated to unicode system recently. Now the iDoc downloaded from ECC is having a tag <?xml version="1.0" encoding="utf-16"?>.
The XML Loader in the transaction throws an exception "Cannot perform action on XML document Content is not allowed in prolog. Exception: [Content is not allowed in prolog.]". If I change the encoding manually as "utf-8" and executing the transaction, it is working fine.
Please let me know how to solve the issue.
Thanks,
Raman N

Where should I enhance the webservice to make it able to handle zipped XML documents? Shouldn't take the AXIS library take care of this automatically?
This is the web.xml document I use.
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<display-name>
NDW2</display-name>
<servlet>
<display-name>
Apache-Axis Servlet</display-name>
<servlet-name>AxisServlet</servlet-name>
<servlet-class>
org.apache.axis.transport.http.AxisServlet</servlet-class>
</servlet>
<servlet>
<display-name>
Axis Admin Servlet</display-name>
<servlet-name>AdminServlet</servlet-name>
<servlet-class>
org.apache.axis.transport.http.AdminServlet</servlet-class>
<load-on-startup>100</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>AxisServlet</servlet-name>
<url-pattern>/servlet/AxisServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>AxisServlet</servlet-name>
<url-pattern>*.jws</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>AxisServlet</servlet-name>
<url-pattern>/services/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>AdminServlet</servlet-name>
<url-pattern>/servlet/AdminServlet</url-pattern>
</servlet-mapping>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
</web-app>

XML.load specific port

Similar Messages

Maybe you are looking for