XML Message Not Generated in SUS SRM 4.0

Hi !
In Supplier Self Service(SUS) SRM 4.0 we did a
development for ASN creation through file upload .
It's a <b>BSP</b> Application .
Vendor uploaded the file for ASN creation .
Their generated ASN No. which are in Standard tables.
But for Some of them No XML Messages Genrated which
suppose to pass backend SAP R/3 .
Anybody having any idea where exactly these XML
Messages are?   We have searched through SXMB_MONI
& checked all qRFCs.
But unable to find their XML messages.
Looking forward your ideas.
Regards
Sachin S M
<b></b>
Message was edited by: Sachin S M

Hi,
Can you tell me if the next scenario is possible with EBP 5.0 (WAS 6.40) but without XI.
We need to develop an application to allow the supplier to upload an Invoice in XML and save it in EBP.
I was thinking on using a BSP application with an input field to browse local PC and pick up an Invoice XML file. Then post the XML and parse it in the BSP application and save the invoice in EBP.
Do you have any experience on it or some documentation?
We have EBP 5.0 but don't want to install an SAP XI.
Thank you

Similar Messages

Outbound Messages not generating on Published

I tried publishing a PO Confirmation and a Save + Send a Scheduling Agreement Confirmation from the Supplier view. However no outbound xml messages were generated.
I have been reading posts of activating the Badis but in another proejct that we recently implemented, we did not have to implement any Bad for RON or ROC.
Is there any other config or scheduling or queue setup required on the SNC side to trigger these messages?
Nothing shows up on sxmb_moni
K

Hi,
Activate validation check SCONF_PUBLISH_DIRECT for validation profile=SCN3.
Path:SPRO>Supply Network Collaboration>Basic setting --> Validation >Own settings>Maintain setting for validation profile
Enter validation profile=SCN3,validation check=SCONF_PUBLISH_DIRECT and save the settings.
Now try to publish schedule agreement confirmation.
Regards,
Nikhil

He XML message is going over to SRM from XI , but getting an application error (Exception) when checking in sxmb_moni on the SRM side

hi experts ,
we are using classic scenario (ECC 6.6 & SRM 7.0)
we have are configured Procure-to-Pay Scenario ,Note 1263876 - SAP SRM: Configuration of Procure-to-Pay Scenario.
but facing issue.
The XML message is going over to SRM from XI , but getting an application error (Exception) when checking in sxmb_moni on the SRM side. So we are not able to see the PR in the Sourcing cockpit in SRM.
error as below
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/SE/Global">ExchangeFaultData</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi Vijay,
Can you tell us the interface name?
If it is stuck in FEH (Application Error) in SRM then you can check the detail error by going into tcode /n/sappo/ppo2.
You need to enter the Business Process, Order Assignment and Mode Of Postprocessing Order and then execute.
It will show you all the messages stuck in application error for that interface and if you double click on any one of them you will get to see the detailed error with options to Discard, Repeat etc.
Let us know if this helps you.
Regards,
Mayur

Client Proxy: XML message not well-formed unexpected symbol 'target

Hi,
I'm trying to get a client proxy to work based on several blogs (1387,1672)
The error I'm getting now is:
<SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="XML message not well-formed in node (7 ,49 )unexpected symbol: 'target'" p2="" p3="" p4="">PARSING.GENERAL</SAP:Code>
<SAP:Text language="EN">Parsing error: XML message not well-formed in node (7 ,49 )unexpected symbol: 'target'</SAP:Text>
</SAP:ErrorHeader>
The proxy has been generated successfully
in SXMB_ADM R/3 role is application system and uses dest://rfc_dest
The rfc destination does not accept ?type=entry but apparently also does not need it. When I test the connection it gives a statuscode 200 (not 500)
SLDCHECK works fine.
Not sure where to look for this error?
Any ideas?
Thanks
Tom

Hello Smitha,
I forgot to mention that the message is still in R/3, it has not arrived in XI yet, so the error is visible in SXMB_MONI in R/3.
Also it is just a dummy message, It only contains one node and that is called differently:
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:IF021_HTTP_MSG xmlns:ns1="http://oce.com/xi/eu1/R3CCSEU/IF021_Ordrsp_TD_to_Ordrsp_CCS" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<IF021_DT>GetOrdRsp</IF021_DT>
</ns1:IF021_HTTP_MSG>
Any mappings only take place in XI itself, and even there I have no node called target.
Regards
Tom

BPM error : Message pipeline PE_ADAPTER unknown XML message not found. Help

Hello All,
I have done 3 steps in BPM
RFC --- BPM --- RFC
RECEIVE step ==> Opens SYNCH ASYNCH bridge and receives RFC request message
SEND synchronous ==> to send RFC request and get the RFC response.
SEND ==> Closes SYNCH ASYNCH bridge and Send's response back to the RFC.
In my last send step (response back) I am getting message
"Message pipeline PE_ADAPTER unknown XML message not found" .
Pls help

Hi Rick,
check out this SAP Note: 1087532
Regards
Dominic

SXMB_MONI : Error in Persistence Layer : XML Message Not Found

Hi Team,
There are some messages in our Production system and is in Scheduled state in SXMB_MONI and when we try to re-process those messages, we are getting message : Error in Persistence Layer and when we double click on message, we are getting the error : XML Message Not Found.
Any help on this is highly appreciated.
Thanks & Regards,
C V Jayachandra

Hi,
Please refer the below discussion
SXMB_MONI - Error accessing persistence layer
regards,
Harish

Upgrade with DBUA to 12c hangs while upgrade.xml does not generated

Hi together,
actually I've an upgrade problem with dbua. At a server with Oracle Linux 6 I've running an 121.0.2 GI. in that GI there are two Oracle Homes: one 12.1.0.2 wih PSU1 and one 11.2.0.4 with PSU4. I'm trying to upgrade the database "testdb" from 11.2.0.4 to 12.1.0.2 with dbua.
So I'm logged in and set all session parameters to the new 12.1.0.2 home:
$ export ORACLE_HOME=/usr/local/oracle/product/12.1.0.2/
$ export PATH=$ORACLE_HOME/bin:$PATH
After that I start the dbua. i select my testdb and wait. And still wait..... After selecting the db and dbua has getting al the database information he will hang at 0% by "Run Pre Upgrade Utility". But why?
So I've looked into trace.log from dbua:
oracle@testserver- DB_12_1_0_2:/usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2
$ ll
total 96
-rw-r----- 1 ora121 oinstall    1374   Oct 17 10:56 mapfile.txt
-rw-r----- 1 ora121 oinstall      104   Oct 17 10:56 preupgdir.sql
-rw-r----- 1 ora121 oinstall 29326    Oct 17 10:56 sqls.log
-rw-r----- 1 ora121 oinstall 53994    Oct 17 10:56 trace.log
-rw-r----- 1 ora121 oinstall         0    Oct 17 10:56 trace.log.lck
ora121@QUM169 - DB_12_1_0_2:/usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2
$ less trace.log
In the trace.log he tells me, that he weren't able to create a file called upgrade.xml and throws a java exception:
[Thread-77] [ 2014-10-17 10:56:28.200 CEST ] [PreUpgradeToolGroup.validate:252] validateConnectionToDB using user:=null
[Thread-77] [ 2014-10-17 10:56:28.233 CEST ] [PreUpgradeToolGroup.validate:268] create log dir obj for pre upgrade tool
[Thread-77] [ 2014-10-17 10:56:28.234 CEST ] [PreUpgradeToolGroup.validate:274] creating dir object for pre upgrade spool at/usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2
[Thread-77] [ 2014-10-17 10:56:28.239 CEST ] [PreUpgradeToolGroup.validate:320] Executing CREATE OR REPLACE DIRECTORY PREUPG_OUTPUT_DIR AS '/usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2' using SQLEngine.
[Thread-77] [ 2014-10-17 10:56:28.244 CEST ] [PreUpgradeToolGroup.validate:362] validationLogDir =
[Thread-77] [ 2014-10-17 10:56:28.244 CEST ] [PreUpgradeToolGroup.validate:376] Preupgrade Utility used= /usr/local/oracle/product/12.1.0.2/rdbms/admin/preupgrd.sql
[Thread-77] [ 2014-10-17 10:56:29.742 CEST ] [PreUpgradeToolGroup.validate:462] Executed Pre Upgrade Script successfully, now load MEP............
[Thread-77] [ 2014-10-17 10:56:29.742 CEST ] [DbuxUtils.writeRootElementForUpgradeXML:509] Passed in upgrade xml file /usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2/upgrade.xml does not exist.
[Thread-77] [ 2014-10-17 10:56:29.742 CEST ] [PreUpgradeToolGroup.validate:479] Executing preupgrade tool
[Thread-77] [ 2014-10-17 10:56:29.743 CEST ] [PreUpgradeToolGroup.validate:480] Spool file /usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2/upgrade.xml
[Thread-77] [ 2014-10-17 10:56:29.743 CEST ] [DbuxUtils.getPreUpgradeLoader:236] upgrade.xml does not generated
[Thread-77] [ 2014-10-17 10:56:29.743 CEST ] [PreUpgradeToolGroup.validate:487] Executing Preupgrade tool failed..Upgrade xml does not exist
[Thread-77] [ 2014-10-17 10:56:29.743 CEST ] [PreUpgradeToolGroup.validate:491] upgrade.xml does not generated
[Thread-77] [ 2014-10-17 10:56:29.745 CEST ] [SQLEngine.done:2278] Done called
Exception in thread "Thread-77"
java.lang.NullPointerException
        at oracle.sysman.assistants.dbma.wizard.view.ValidationPage.prepareMaps(ValidationPage.java:1989)
        at oracle.sysman.assistants.dbma.wizard.view.ValidationPage.check(ValidationPage.java:1651)
        at oracle.sysman.assistants.dbma.wizard.view.ValidationPage$Check.run(ValidationPage.java:2040)
        at java.lang.Thread.run(Thread.java:682)
But why? Does anybody know that error?
Thanks a lot for help and regards,
Dave

Yep they are! The own group they weren't in was the asmadmin group. Amusingly I had to add them both to the asmadmin group, so that the upgrade.xml was created with the oracle 12c user and group oinstal and not with oracle 11g user and group asmadmin. I can't tell you really, why, because it is a little bit confusing why he generate a file with the correct group when I add that group to the user, which was assigned wrong before to the file ?!?!

Connection has no password, -jdbc.xml file not generated for connection

Hi,
I'm migrating a jdev 10g web application (with EJB) to 11g, i did the automatic migration tool offred by 11g, i'm using the integrated weblogic server but it seems there is a *-jdbc.xml file missed, and it must be generated, this is the log file of the start of server :
IntegratedWebLogicServer started.
[Running application SAB_ADMIN on Server Instance IntegratedWebLogicServer...]
[09:14:15 AM] ---- Deployment started. ----
[09:14:15 AM] Target platform is (Weblogic 10.3).
[09:14:18 AM] Retrieving existing application information
[09:14:19 AM] Running dependency analysis...
[09:14:19 AM] Deploying 4 profiles...
[09:14:21 AM] Wrote Web Application Module to C:\Users\Moshe\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SAB_ADMIN\ViewControllerWebApp.war
[09:14:21 AM] Wrote Web Application Module to C:\Users\Moshe\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SAB_ADMIN\ModelWebApp.war
[09:14:25 AM] Wrote EJB Module to C:\Users\Moshe\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SAB_ADMIN\ModelEJB.jar
[09:14:25 AM] WARNING: Connection DBConnectionSAB has no password. DBConnectionSAB-jdbc.xml file not generated for connection DBConnectionSAB.
[09:14:26 AM] Wrote Enterprise Application Module to C:\Users\Moshe\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SAB_ADMIN
[09:14:26 AM] Deploying Application...
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:28.065--ServerSession(40464643)--property eclipselink.jdbc.user is deprecated, property javax.persistence.jdbc.user should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:28.299--ServerSession(40464643)--property eclipselink.jdbc.driver is deprecated, property javax.persistence.jdbc.driver should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:28.299--ServerSession(40464643)--property eclipselink.jdbc.url is deprecated, property javax.persistence.jdbc.url should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:28.299--ServerSession(40464643)--property eclipselink.jdbc.password is deprecated, property javax.persistence.jdbc.password should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.user.Session_user.mergeEntity(java.lang.Object)' in EJB 'SessionEJB' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'SessionEJB' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.user.Session_user.persistEntity(java.lang.Object)' in EJB 'SessionEJB' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'SessionEJB' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.bouton.Session_bouton.mergeEntity(java.lang.Object)' in EJB 'Session_bouton' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'Session_bouton' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.bouton.Session_bouton.persistEntity(java.lang.Object)' in EJB 'Session_bouton' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'Session_bouton' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.operation.Session_operation.mergeEntity(java.lang.Object)' in EJB 'Session_operation' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'Session_operation' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.operation.Session_operation.persistEntity(java.lang.Object)' in EJB 'Session_operation' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'Session_operation' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:29.656--ServerSession(42285779)--property eclipselink.jdbc.user is deprecated, property javax.persistence.jdbc.user should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:29.656--ServerSession(42285779)--property eclipselink.jdbc.driver is deprecated, property javax.persistence.jdbc.driver should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:29.656--ServerSession(42285779)--property eclipselink.jdbc.url is deprecated, property javax.persistence.jdbc.url should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:29.656--ServerSession(42285779)--property eclipselink.jdbc.password is deprecated, property javax.persistence.jdbc.password should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application C:\Users\Moshe\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SAB_ADMIN\ModelWebApp.war. Please make sure that the annotations are valid. The error is oracle.adf.view.faces.webapp.ResourceServlet>
<14 oct. 2010 09 h 14 GMT+01:00> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1287044066833' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'SAB_CRUD-Model-context-root''
weblogic.application.ModuleException: Failed to load webapp: 'SAB_CRUD-Model-context-root'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:404)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:180)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:508)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.adf.view.faces.webapp.ResourceServlet
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:280)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:253)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
     Truncated. see log file for complete stacktrace

This is the content of my web.xml file where i found the markup <servlet> and i tried to run without the first one but the error still like it was :
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>resources</servlet-name>
<servlet-class>oracle.adf.view.faces.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>resources</servlet-name>
<servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet>
<description>Web Service MyConnexionServiceSoapHttpPort</description>
<display-name>Web Service MyConnexionServiceSoapHttpPort</display-name>
<servlet-name>MyConnexionServiceSoapHttpPort</servlet-name>
<servlet-class>oracle.controll.ConnexionBaseDeDonnees</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>ResultatRequetePort</servlet-name>
<servlet-class>oracle.controll.ResultatRequete</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>resources</servlet-name>
<url-pattern>/adf/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>MyConnexionServiceSoapHttpPort</servlet-name>
<url-pattern>MyConnexionServiceSoapHttpPort</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ResultatRequetePort</servlet-name>
<url-pattern>/ResultatRequetePort</url-pattern>
</servlet-mapping>
Thanks...

XML PO not generated.

Hi,
We are on SRM 7.0 , ECC 6 (Ehp 4.0) and trying to configure the MM-SUS scenario.
We are trying to configure service procurement using ESOA.Ideally once a PO is created in my ERP system a corresponding XML PO should be generated for sending it to SUS via XI.
For this I have activated Business Function LOG_MM_P2P_SE_1 and workflow linkages have been activated for events BUS2012 (Created, Changed, Completed, Released) within workflow definition WS53800008.
However the XML PO is still not generated. I have also applied the note : 1316245 in ERP system(Sending XML messages from ERP)
I believe there is a BADI too, but I am unaware of it and how to use it.
I would be grateful if someone could shed some light on this.
Thanks,
Nikhil

Hi,
Can anyone pl help me out with this?
NIkhil

Output message not generated for Purchase order

We maintain MN04 message condition record for 2 key combination for output type NEU:
1. Purchasing Output determination : Document type -> NB, medium 1 print out
2. Purchasing Output determination : Document type/Pur Org/Vendor -> NB, 1000, vendor 20001, medium 5 External email
When I create PO for other vendor (not 20001), the system is nicely generating the output of the PO for printout.
Next we have maintain a condition record in MN04 for a particular vendor 20001, Doc type and Porg with setting 5, 4, EN so that we can send the PO via email to the vendor 20001, the system is not generating a message output of the purchase order when i check it before saving.
Please help me with this situation. we need setup the email PO functionality.

I created another message type ZNEU copy from NEU, include it in the message schema, created condition record with MN04/MN05 for both NEU for printout and ZNEU for medium 5 email. done all steps mentioned in the links.
When create a PO still only 1 message record NEU is defualted for printout only.
The message record for email ZNEU is not defaulted in PO?? Anything elase need to be done.

Xml is not generating the selected column

Hi experts,
I have selected the 3 column in my slect statement with 3 bind variable . But when I save my datamodel and generate the xml , My xml is not showing the selected three column...please find the blow query.
Select BAL_ATT.TRANSACTIONAL_AMOUNT_WD0,
BAL_ATT.FUNCTIONAL_AMOUNT_WD0 ,
SIGNOFF.CODE_COMBINATION_ID,
RT.ROLE_NAME
from
MLC_BAL_ATTRIBUTE_T BAL_ATT /* A_MLC_BAL_ATTRIBUTE */ ,
MLC_USER_T US/* A_MLC_USERS */ ,
MLC_BAL_SEGMENT_T BAL_SEG/* A_MLC_BAL_SEGMENT */ ,
MLC_SIGNOFF_T SIGNOFF /* A_MLC_SIGNOFF */ ,
MLC_LEDGER_ROLE_HIERARCHY_T RHT,
MLC_ROLE_T RT , MLC_LEDGER_T Leg,
MLC_LEDGER_COMPONENT_T LC
where ( SIGNOFF.CODE_COMBINATION_ID = BAL_ATT.CODE_COMBINATION_ID
and SIGNOFF.CODE_COMBINATION_ID = BAL_SEG.CODE_COMBINATION_ID
and SIGNOFF.MONTH_END_DATE = BAL_ATT.MONTH_END_DATE
and RHT.LEDGER_ID= SIGNOFF.LEDGER_ID
and RHT.LEDGER_COMPONENT_ID=SIGNOFF.LEDGER_COMPONENT_ID
and RT.ROLE_ID=RHT.ROLE_ID
and LC.LEDGER_ID=SIGNOFF.LEDGER_ID
and LC.LEDGER_ID=LEG.LEDGER_ID
and (US.USER_ID =SIGNOFF .ROLE4_USER_ID or
US.USER_ID =SIGNOFF .ROLE3_USER_ID
or US.USER_ID =SIGNOFF .ROLE1_USER_ID
or US.USER_ID =SIGNOFF .ROLE2_USER_ID
or US.USER_ID =SIGNOFF .ROLE5_USER_ID)
and LEG.LEDGER_NAME IN (:LEG)
and RT.ROLE_NAME IN(:ROLE)
and LC.LEDGER_COMPONENT_NAME IN(:LEG_COMP)
and (SIGNOFF.ROLE1_STATUS is null or SIGNOFF.ROLE2_STATUS is null or SIGNOFF.ROLE3_STATUS is null or SIGNOFF.ROLE4_STATUS is null or SIGNOFF.ROLE5_STATUS is null))
Let me know If I need to do some configuration.
I need to generate the xml and then need to import it my rtf template...

Hi RavindraKshirsagar,
We have a problem like you faced. Our requirement is that, we need to generate dynamically the PERSON element in our javabean.
<xs:element name='SERVICE_REQUESTER'>
          <xs:complexType>
               <xs:sequence>
                    <xs:element ref='ORGANIZATION' />
                    <xs:element ref='PERSON' maxOccurs='unbounded' />
               </xs:sequence>
          </xs:complexType>
     </xs:element>For this maxOccurs, as JAXB is not generating any Setter Method. As we need to get data dynamically from external application. If you could help us in handling this case dynamically, it will be well and good.
Please send us the script / code asap.

XML messages not processed

Hi all,
I have a problem in my FTP folder. I have a text file to be processed as XML messages in XI. The problem is, it's not processing. The text file goes straight to the archive folder without processing it to an XML file. It's not in sxmb_moni and smq2. I'm not sure what happened. It was being processed before.
Thanks.
Regards,
IX

Check your sender file adapter status from the Communication channel monitoring on your Runtime Workbench.
Thanks,
Pooja Pandey

The Po Changed XML Message is in Error in SRM SUS

Dear Experts,
We are integrating ECC to SRM SUS system, and PO was successfully processed from PI and in SRM SUS we are getting below error.
<namespace="http://sap.com/xi/SRM/SE/Global">ExchangeFaultData</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
And the message is in Inbound Q with status u201CXI Error Application Error .ABAP:Queue Stoppedu201D
Observed that messege was sucessfully processed from PI, and in error it is showing as XI Error.
Please help us to resolve the issue.
Thanks in Advance,
Soumya.

Hello,
What you can do is:
1.) Look for the name of the queue in SXI_MONITOR of SUS System
2.) Go to tcode SMQ2
3.) Input the name of your queue there
4.) Unlock your queue
Hope this helps,
Mark

XML message failing in the SUS side for vendor replication from ERP

Dear Experts,
We have configured MM-SUS scenarios in our environment of SRM 7.01/ECC 6 ehp 5.
We are trying to replicate the Vendor master from ECC to SUS using PI ( idoc message ZCREMAS_SUS_MM)).
The message is successully processed in the PI. It is failing in the SUS side.
The exception is as below:
An error occurred when deserializing in the simple transformation program /1SAI/SASF5486DA19E3520591A1B (Length of "123 JALAN TIMUR" exceeds maximum length "10", specified with tt:maxLength Kernel ErrorId: ST_CONSTRAINT_MAXLENGTH) XML Bytepos.: 607 XML Path: ns0:SupplierPortalTradingPartner(1)TradingPartnerOrganization(2)Address(8)HouseNumber(6) An error occurred when deserializing in the simple transformation program /1SAI/SASF5486DA19E3520591A1B Length of "123 JALAN TIMUR" exceeds maximum length "10", specified with tt:maxLength</SAP:Stack>
Where I can change the settings to allow the maximum length of 10?
Any input will be highly appreciated.
Thanks and regards,
Ranjan

Hi,
Note 1510484 - SUS: Order longtext in message area displayed incorrectly
Note 1559121 - SUS: Long texts are getting broken in PCO (POR)document
Given notes are not exactly related to the problem. Let me know if notes could work for the current issue.
Regards,

XML file not generating Completely

Hi ,
I am reading a file from the Application Server of XML format in Binary Mode. After reading I am checking the contents and with every 255 Char I am appending the contents in the different row, thus creating a internal table having one field of length 255.
I am using this table to send an email to the recepient using the FM 'SO_NEW_DOCUMENT_ATT_SEND_API1'. This is generating a Attachment. But when I open this in Internet browser, It is not getting compete contents.
I am not sure, If I have missed something.
Regards,
Arpit

Hi Chen,
Thanks for thr reply. The XML file contains data related to Idocs.The complete result If I open a XML file is
<?xml version="1.0" encoding="UTF-8" ?>
- <DELVRY03>
- <IDOC BEGIN="1">
- <EDI_DC40 SEGMENT="1">
<TABNAM>EDI_DC40</TABNAM>
<MANDT>002</MANDT>
<DOCNUM>0000000000071931</DOCNUM>
<DOCREL>620</DOCREL>
<STATUS>30</STATUS>
<DIRECT>1</DIRECT>
<OUTMOD>2</OUTMOD>
<IDOCTYP>DELVRY03</IDOCTYP>
<MESTYP>SHPORD</MESTYP>
<STDMES>SHPORD</STDMES>
<SNDPOR>SAPAD1</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPRN>AD1002LS</SNDPRN>
<RCVPOR>XML_PORT</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPFC>LS</RCVPFC>
<RCVPRN>HT</RCVPRN>
<CREDAT>20110405</CREDAT>
<CRETIM>070247</CRETIM>
<SERIAL>20110218054703</SERIAL>
</EDI_DC40>
- <E1EDL20 SEGMENT="1">
<VBELN>0080004041</VBELN>
<VSTEL>GB03</VSTEL>
<VKORG>170</VKORG>
<INCO1>DDU</INCO1>
<ROUTE>DGGBPA</ROUTE>
<VSBED>E1</VSBED>
<BTGEW>315.000</BTGEW>
<NTGEW>315.000</NTGEW>
<GEWEI>KGM</GEWEI>
<VOLUM>0.000</VOLUM>
<ANZPK>00000</ANZPK>
<PODAT>20110218</PODAT>
<POTIM>161703</POTIM>
- <E1EDL22 SEGMENT="1">
<VSTEL_BEZ>FSQ HT West Drayton</VSTEL_BEZ>
<VKORG_BEZ>FSQ</VKORG_BEZ>
<INCO1_BEZ>Delivered Duty Unpaid</INCO1_BEZ>
<VSBED_BEZ>UK Standard</VSBED_BEZ>
</E1EDL22>
- <E1EDL21 SEGMENT="1">
<LFART>ZCOR</LFART>
<LPRIO>02</LPRIO>
<TRAGR>Z001</TRAGR>
- <E1EDL23 SEGMENT="1">
<LFART_BEZ>Correction Delivery</LFART_BEZ>
<LPRIO_BEZ>Standard</LPRIO_BEZ>
<TRAGR_BEZ>Standard</TRAGR_BEZ>
</E1EDL23>
</E1EDL21>
- <E1EDL18 SEGMENT="1">
<QUALF>ORI</QUALF>
</E1EDL18>
- <E1ADRM1 SEGMENT="1">
<PARTNER_Q>AG</PARTNER_Q>
<PARTNER_ID>0060004842</PARTNER_ID>
<LANGUAGE>EN</LANGUAGE>
<FORMOFADDR>Mr.</FORMOFADDR>
<NAME1>Sabu P Kuriakose</NAME1>
<NAME2>KURIA</NAME2>
<STREET1>Flat 2 St.Raphael's House. Sherborne Roa</STREET1>
<POSTL_COD1>RG215TG</POSTL_COD1>
<CITY1>Basingstoke</CITY1>
<TELEPHONE1>01256351078</TELEPHONE1>
<COUNTRY1>GB</COUNTRY1>
<REGION>HA</REGION>
</E1ADRM1>
- <E1ADRM1 SEGMENT="1">
<PARTNER_Q>WE</PARTNER_Q>
<PARTNER_ID>0060004842</PARTNER_ID>
<LANGUAGE>EN</LANGUAGE>
<FORMOFADDR>Mr.</FORMOFADDR>
<NAME1>Sabu P Kuriakose</NAME1>
<NAME2>KURIA</NAME2>
<STREET1>Flat 2 St.Raphael's House. Sherborne Roa</STREET1>
<POSTL_COD1>RG215TG</POSTL_COD1>
<CITY1>Basingstoke</CITY1>
<TELEPHONE1>01256351078</TELEPHONE1>
<COUNTRY1>GB</COUNTRY1>
<REGION>HA</REGION>
</E1ADRM1>
- <E1ADRM1 SEGMENT="1">
<PARTNER_Q>OSP</PARTNER_Q>
<PARTNER_ID>GB03</PARTNER_ID>
<LANGUAGE>EN</LANGUAGE>
<NAME1>Four Square UK</NAME1>
<STREET1>Armstrong Road</STREET1>
<POSTL_COD1>RG24 8NU</POSTL_COD1>
<CITY1>Basingstoke</CITY1>
<COUNTRY1>GB</COUNTRY1>
<REGION>HA</REGION>
</E1ADRM1>
- <E1ADRM1 SEGMENT="1">
<PARTNER_Q>OSO</PARTNER_Q>
<PARTNER_ID>170</PARTNER_ID>
<LANGUAGE>EN</LANGUAGE>
<NAME1>Four Square UK</NAME1>
<STREET1>Armstrong Road</STREET1>
<POSTL_COD1>RG24 8NU</POSTL_COD1>
<CITY1>Basingstoke</CITY1>
<COUNTRY1>GB</COUNTRY1>
<REGION>HA</REGION>
</E1ADRM1>
- <E1EDT13 SEGMENT="1">
<QUALF>006</QUALF>
<NTANF>20100420</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>20100420</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>20100419</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>20100419</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
- <E1EDT13 SEGMENT="1">
<QUALF>003</QUALF>
<NTANF>20100420</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>20100420</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20100420</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>20100420</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesEC3FD6/~4120145.xml'.
Regards,
Arpit

XML Message Not Generated in SUS SRM 4.0

Similar Messages

Maybe you are looking for