XML message ok in SXMB_MONI, but not delivered
Hi there,
I am new to PI and have a question regarding monitoring of an interface.
We have a problem that a SOAP request doesn't reach its receiver.
When I have a look at SXMB_MONI the XML message has status "successfully processed" (race flag as indicator).
But if I check on [http://<HOST>:<PORT>/MessagingSystem/monitor/monitor.jsp|http://<HOST>:<PORT>/MessagingSystem/monitor/monitor.jsp], there I see that the message for the same interface has status "not delivered".
It shows me the following error message:
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException
How can I investigate more on this to find out why the interface doesn't work?
I have the impression that the monitoring of PI interfaces is quite unstructured.
Is there a good tutorial/blog which shows where to look for this information?
Thanks in advance!
In the message monitoring I've messages with status 'Not delivered'.
If I display them, I just see error messages like
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException
Adapter Framework caught exception: null
Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
How can I see more detailed error messages???
Similar Messages
-
I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my iMac computer and it still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help? There are 12,733 songs, a few dozen of which are not going to be in the Apple music library because they are unique to my collection. Also, some titled "Track XX" and no artist. I assume these would either not upload or else just be uploaded. But, after an overnight of step 2, the iTunes match program was still on song number 7384 or 12733 (it was on that number for over 12 hours). Looking in the music library, activating the iCloud icon and status fields, there were hundreds of songs with the status "waiting."
Lmwilliamson wrote:
Kernel panics:
After taking my late 2009 15 inch macbook pro to the apple store, the genius completely erased my computer and reinstalled the Mac OS X software, but the problem still persists.
I also took it to my college tech support center, they tried to take the ram out and reinsert it and clean up the dust, but the problem still remains.
I am able to use my computer in Safeboot mode (only)
Well it could still be a software problem if you installed a third party program after the OS X wipe and install, because by booting into Safe Mode it disables certain functions of OS X and hardware. Check for updates or problems for all your third party software, include everything, including menulets, System Preference panes, hacks and so forth.
If you restored any sort of software from backup like TimeMachine, it likely was corrupted data and now is returned.
If the college tech support found a lot of dust clogging the rear exhaust vents behind the fans, then likely the heat damage done to the machine has already occured and can't be reversed. Video cards are usually first to go, which Safe Mode does disable the video card somewhat.
Run through this list of fixes, it's systematic in nature, also has a Hardware Test to see what's going on
..Step by Step to fix your Mac
Too bad this is occurring to a mere 4 year old machine, but dust will do that. Here is the culprit that Apple doesn't tell anyone about. -
Hi, I have had an LG Octane for 4 years and loved it. I used it for email, surfing the web and facebook. But 6 weeks ago I stopped getting text messages, I could send but not receive. I was told it was just worn out. So I ordered another Octane from ebay, and it wouldn't connect to the internet. I was told by Verizon that the software had been changed. So I ordered a NEW in Box Octane and I am having trouble with that too. Bing won't work, nothing will work that will enable me to download Verizon Opera mini that still works on my old phone. I have a smart phone with another number but I LOVE the Octane for daily use. Why will my old Octane work but I can't get a NEW one to. Verizon guys are stumped too:( Please help!! Thanks!
Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread. -
Thunderbird has just duplicated x 2 every message in my inbox but not in any other folder. It's the fourth time it's done this so how do I get rid of them?
I've just tried downloading two addons to try and fix this from the forum but one wasn't compatible with Firefox 28 and the other started downloading something very dodgy to do with .xpi file converters.
So any help would be great, thanks.first you have an anti virus problem... duplicated message almost always occur through one of two reasons. Anti virus program barfs on a message (relatively common) Server side message corruption (becoming more common, particularly at Yahoo)
Turning off anti virus checking will generally allow the message that causes the issue to download. logging into the webmail portal and deleting what you think looks like the "next" message to download will usually fix corruption that causes duplication of downloads.
Now to the cleanup.
This add-on should do that for you https://addons.mozilla.org/en-US/thunderbird/addon/remove-duplicate-messages-alte/?src=search -
I receive messages on my IPhone but not on my iPad. Why is this.? Can anyone help please?
I receive messages from my iPhone but not on my iPad. Why is this? Can anyone help please?
Settings>Messages>iMessage>On
-
I receive messages (via Message) on my iPad, but NOT my iPhone. What's happening?
Hi all,
I seem to be able to receive Messages on my iPad, but not my iPhone. My iPad doesn't have cellular service, so I'm assuming that I won't be able to get non-Mac-based messages on it...
Using Verizon.
I have an iPhone 5, it's up-to-date. Is there something in Settings I need to change?
Can anyone help?
Thanks,
EriI've removed icons from Multitask bar, both devices are completely powered down and off.
Please tell me why this would help? My iPad was at home, my iPhone with me when I messaged my husband. Receiving no response, I tried again and again and got no answer from him.
I come home and find that his responses are all on the iPad.
But I've never had that problem before!
I have to wait until my spouse sends me a message and see...
Thanks,
Eri
ETA: PS I'm not sure about my iCloud settings. -
Messages to one person showing not delivered, but they receive them
So hubby and I have the same phone , Iphone 4s. Starting the this past weekend, when we send text messages to each other ( and only each other, not even others with iphone 4s or otherwise ) it comes back that the message is " not delivered " however we get the txts.
This happens on EVERY txt we send back and forth, and to both of us, but on each phone, the only txtx affected are the ones to each other.
Any ideas, why? Why only one person? How to fix?
Thank you,Hello Chels97,
Thanks for using Apple Support Communities.
The following support article has troubleshooting steps for you to go through in order to resolve this issue. Please follow the relevant section depending on whether you are sending via SMS or iMessage.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Take care,
Alex H. -
XML,CLOB AND MEMORY : CONSUMED BUT NOT RELEASED !!!
Hi,
I'm working with XMLGEN Package and XSLT Processor to produce XML Document on Oracle 8.1.7.3 server, I use 9i XML and Java packages.
I'm facing the following BIG MEMORY problem :
Environment : I must generate an XML parsed with an XSL document of 80Mo (nearly 22 000 rows),
as XMLGEN is on DOM parsing method, I extract my XML by 500 Rows and I loop until 22 000 rows. I use DBMS_JOB with jobs who read and execute export each minute.
The algorithme is :
keeprow=22000
while keeprow>0
Create 3 clob (DBMS_LOB Package) : one for XSL Sheet, one for XML and one for result
GetXML (XMLGEN Package)
Transform in XSL (XSL Processor)
Write to disk (UTL_FILE Package)
Free the 3 Clob ((DBMS_LOB Package))
keeprow =keeprow-500
loop
The problem : The process start at 250Mo ot total memory and END at 1000 Mo of used memory and NEVER RELEASE 1 ko of memory.
So often I get a JavaOutOfMemoryError (I've allocated 1Go Ram to my JAVA process).
Any help will be very very appreciated !
My derived problem is 22 000 rows is not enough I've some export of 200 000 rows to do (And I cannot allocate 10 Go of RAM !!!)
Following My PL/SQL Code.
Regards
Fred
PROCEDURE DO_EXPORT_XML(
P_JOB_ID JOB_PARAMETRE.JOB_ID%TYPE,
P_JOB_ID_ORDRE JOB_PARAMETRE.JOB_ID_ORDRE%TYPE,
P_CLE_UP UPLOADREQ_TEMP.ID%TYPE,
P_LOAD_OR_DELOAD VARCHAR2)
IS
L_FILE_NAME JOB_PARAMETRE.JOB_FILE_NAME_DEST%TYPE;
L_REP_NAME JOB_PARAMETRE.JOB_REP_NAME_DEST%TYPE;
L_FILE_STYLESHEET JOB_PARAMETRE.JOB_STYLESHEET%TYPE;
L_VERSION_PDM JOB_PARAMETRE.JOB_VPDM%TYPE;
P_SELECT varchar2(4000):='';
P_CURSOR varchar2(4000):='';
l_filehandler_out UTL_FILE.FILE_TYPE;
--Variable pour le traitement par lot de 500
L_NBROW_TODO_ATONCE number := 500;
L_NBROW_MIN number := 1;
L_NBROW_MAX number := -1;
L_NBROWKEEPTODO number := -1;
xslString CLOB := null;
res number default -1;
xmlString CLOB := null;
li_ret number := 0;
li_faitle number := 0;
amount integer:= 255;
li_loop integer := 0;
charString varchar2(255);
ls_deload varchar2(255) default '';
ls_SQL varchar2(4000) default '';
ls_temp_file varchar2(255) default '';
text_file_dir varchar2(32) := 'e:\temporarydir';
l_par xmlparser.parser;
l_xml xmldom.domdocument;
l_pro xslprocessor.processor;
l_xsl xslprocessor.stylesheet;
docfragnode xmldom.DOMNode;
docfrag xmldom.DOMDocumentFragment;
l_parsedclob clob := null;
l_amount binary_integer := 32767;
l_ligne varchar2(32767);
l_offset number default 1;
l_pos number default null;
l_pos2 number default null;
l_lobsize number default null;
l_memsize number default 1073741824; --1024 Mo
l_mempipo number default 0;
type rc is ref cursor;
l_cursor rc;
cursor TEMPLATE is select UNSPSC,1 as NB from UPLOADREQ_TEMP where 1=2;
c1rec TEMPLATE%rowtype;
BEGIN
l_mempipo:=setmaxmemorysize(l_memsize);
dbms_lob.createtemporary(l_parsedclob, true, dbms_lob.session);
dbms_lob.createtemporary(xmlstring, true, dbms_lob.session);
--return the good select
GET_SELECT_TO_EXPORT_XML(P_JOB_ID , P_JOB_ID_ORDRE , P_CLE_UP , P_SELECT,P_CURSOR, P_LOAD_OR_DELOAD);
SELECT JOB_FILE_NAME_DEST,JOB_REP_NAME_DEST,JOB_STYLESHEET
INTO L_FILE_NAME,L_REP_NAME,L_FILE_STYLESHEET
FROM JOB_PARAMETRE
WHERE JOB_ID =P_JOB_ID AND JOB_ID_ORDRE=P_JOB_ID_ORDRE;
l_filehandler_out := UTL_FILE.FOPEN(text_file_dir, L_FILE_NAME, 'w',l_amount);
--Return XSL Sheet in a clob : cause of memory consumed but not released
xslString := METACAT.load_a_file( 1,L_FILE_STYLESHEET);
open l_cursor for P_CURSOR;
LOOP
fetch l_cursor into c1rec;
exit when l_cursor%notfound;
L_NBROW_MIN := 1;
L_NBROW_MAX := 0;
L_NBROWKEEPTODO:=c1rec.NB;
LOOP
begin
if(L_NBROWKEEPTODO > L_NBROW_TODO_ATONCE) THEN
begin
L_NBROW_MAX:= L_NBROW_TODO_ATONCE + L_NBROW_MAX;
L_NBROWKEEPTODO:= L_NBROWKEEPTODO - L_NBROW_TODO_ATONCE;
end;
else
begin
L_NBROW_MAX:= L_NBROW_MAX + L_NBROWKEEPTODO;
L_NBROWKEEPTODO:=0;
end;
end if;
--on ouvre le fichier de risultats
ls_SQL:= P_SELECT || ' AND ( ROWNUM BETWEEN ' || L_NBROW_MIN || ' AND ' || L_NBROW_MAX || ' ) and UNSPSC=''' || c1rec.UNSPSC || '''';
ls_temp_file := c1rec.UNSPSC || '_' || L_FILE_NAME;
L_NBROW_MIN:=L_NBROW_TODO_ATONCE + L_NBROW_MIN;
--CAT_AUTOLOAD.JOB_ADD_TRACE (P_JOB_ID,'UPLOAD REQUISITE : Export donnies REQUETE ' || to_char(li_loop), ls_SQL,'',0,0);
xmlgen.resetOptions;
xmlgen.setErrorTag('ERROR_RESULT');
xmlgen.setRowIdAttrName('NAH');
xmlgen.setRowIdColumn('NAH');
xmlgen.setEncodingTag('ISO-8859-1');
xmlgen.useNullAttributeIndicator(false);
if(xmlString is not null) then
dbms_lob.open(xmlString,dbms_lob.lob_readwrite);
l_lobsize:= dbms_lob.Getlength(xmlString);
if(l_lobsize>0) then
dbms_lob.erase(xmlString,l_lobsize,1);
end if;
dbms_lob.close(xmlString);
dbms_lob.freetemporary(xmlString);
dbms_lob.createtemporary(xmlstring, true, dbms_lob.session);
end if;
--Return XML in a clob : cause of memory consumed but not released
xmlString := xmlgen.getXML(ls_SQL,0);
l_par := xmlparser.newparser;
xmlparser.parseclob(l_par, xslString);
l_xsl := xslprocessor.newstylesheet(xmlparser.getdocument(l_par),null);
xmlparser.parseclob(l_par, xmlString);
l_xml := xmlparser.getdocument(l_par);
l_pro := xslprocessor.newprocessor;
xslprocessor.showWarnings(l_pro, true);
xslprocessor.setErrorLog(l_pro, text_file_dir || substr(ls_temp_file,0,length(ls_temp_file)-4) || '_logerreur.XML');
if(l_parsedclob is not null) then
dbms_lob.open(l_parsedclob,dbms_lob.lob_readwrite);
l_lobsize:= dbms_lob.Getlength(l_parsedclob);
if(l_lobsize>0) then
dbms_lob.erase(l_parsedclob,l_lobsize,1);
end if;
dbms_lob.close(l_parsedclob);
dbms_lob.freetemporary(l_parsedclob);
dbms_lob.createtemporary(l_parsedclob, true, dbms_lob.session);
end if;
--Return XML Processed with XSL in a clob : cause of memory consumed but not released
xslprocessor.processxsl(l_pro,l_xsl,l_xml,l_parsedclob);
--release NOTHING
xmlparser.freeparser(l_par);
xslprocessor.freeprocessor(l_pro);
l_ligne:='';
l_offset :=1;
l_pos := null;
l_pos2 := null;
if(li_loop=0) then
begin
--on ouvre le fichier et on sauve l'entete + les donnies dedans.
l_pos:=dbms_lob.instr(l_parsedclob,'</DATA>');
if ( nvl(l_pos,0) > 0 ) then
loop
if(l_pos-1>l_amount + l_offset ) then
l_ligne:=dbms_lob.SUBSTR(l_parsedclob,l_amount,l_offset);
UTL_FILE.PUT(l_filehandler_out,l_ligne);
UTL_FILE.fflush(l_filehandler_out);
l_offset:=l_offset+l_amount;
else
l_ligne:=dbms_lob.SUBSTR(l_parsedclob,l_pos-1 -l_offset ,l_offset);
UTL_FILE.PUT(l_filehandler_out,l_ligne);
UTL_FILE.fflush(l_filehandler_out);
exit;
end if;
end loop;
else
EXIT;
end if;
end;
else
--on met les donnies donc on ne repete pas le debut
begin
l_pos:=dbms_lob.instr(l_parsedclob,'<ITEM');
if ( nvl(l_pos,0) > 0 ) then
l_pos2:=dbms_lob.instr(l_parsedclob,'</DATA>');
if ( nvl(l_pos2,0) > 0 ) then
loop
if(l_pos + l_amount <= l_pos2 -1 ) then
l_ligne:=dbms_lob.SUBSTR(l_parsedclob,l_amount,l_pos);
UTL_FILE.PUT(l_filehandler_out,l_ligne);
UTL_FILE.fflush(l_filehandler_out);
l_pos:=l_pos +l_amount;
else
l_ligne:=dbms_lob.SUBSTR(l_parsedclob,l_pos2 -1 -l_pos,l_pos);
UTL_FILE.PUT(l_filehandler_out,l_ligne);
UTL_FILE.fflush(l_filehandler_out);
exit;
end if;
end loop;
else
exit;
end if;
end if;
end;
end if;
li_loop:=li_loop + 1 ;
--UTL_FILE.FCLOSE(l_filehandler_in);
JAVA_GC();
EXIT WHEN L_NBROWKEEPTODO=0;
Exception
when others then
begin
-- IF(utl_file.is_open(l_filehandler_in)) THEN
-- utl_file.fclose( l_filehandler_in);
-- END IF;
IF(utl_file.is_open(l_filehandler_out)) THEN
utl_file.fclose( l_filehandler_out);
END IF;
RAISE_APPLICATION_ERROR(-20001,'File with errors');
end;
END;
END LOOP;
END LOOP;
CLOSE l_cursor;
if ( xmlString is not null ) then
dbms_lob.open(xmlString,dbms_lob.lob_readwrite);
l_lobsize:= dbms_lob.Getlength(xmlString);
if(l_lobsize>0) then
dbms_lob.erase(xmlString,l_lobsize,1);
end if;
dbms_lob.close(xmlString);
dbms_lob.freeTemporary( xmlString);
end if;
if(l_parsedclob is not null) then
dbms_lob.open(l_parsedclob,dbms_lob.lob_readwrite);
l_lobsize:= dbms_lob.Getlength(l_parsedclob);
if(l_lobsize>0) then
dbms_lob.erase(l_parsedclob,l_lobsize,1);
end if;
dbms_lob.close(l_parsedclob);
dbms_lob.freetemporary(l_parsedclob);
end if;
UTL_FILE.NEW_LINE(l_filehandler_out);
l_ligne:='</DATA></CATALOG>';
UTL_FILE.PUT(l_filehandler_out,l_ligne);
UTL_FILE.FCLOSE(l_filehandler_out);
EXCEPTION
when others then
begin
IF(utl_file.is_open(l_filehandler_out)) THEN
utl_file.fclose( l_filehandler_out);
END IF;
end;
END;
******************************Thank you for the info - I had no idea I was puing myself in danger by cutting it so close. Since your post I have moved my iphoto library to an external drive and now have 165 GB of space on my HD. Following this I have 2 questions.
1. Since my available HD space was reduced by the size of the photo download it seems logical that the download is somewhere on my HD still. Is there a place where these photos might be hiding on my HD even though they are not available on the iphoto library?
2. I was able to recover the .jpg files which are fine. I also recovered the .mov files but they have been compromised. I am hoping I can find the originals still on the HD somewhere. If not, do you have any suggestions for recovery methods or programs? I have not used the SD card since the incident so I should be able to attempt another recovery to salvage the .mov files if there is an alternative method/program available.
Thanks again! -
Lost messages appear in Spotlight but not in any mail folders
The first week of June, PowerBook G4 crashed and wouldn't start up again while using Mail. Went to the Genius Bar, they said a corrupt mail file probably brought down the system-we did an archive install and transferred all the messages to Entourage and then re-imported them back to Mail.
When this happened all "sent mail" from Feb 1 until the June 3rd re-install disappeared. I just accepted this. Today, when searching for stuff in Spotlight, some of these "sent mail" messages turned up in Spotlight and when clicked they display. It appears that what I have sent during those missing months is avialable in Spotlight but not to me in Mail.
I have no idea where these messages actually are and how to get them back into a folder in Mail?
Any thoughts. I have the lastest update and have done the usual of Disk Utility, Repair Permissions, Rebuilt my folders, etc.The Archive & Install did not transfer all existing
Mail.app mailboxes/messages to the new install which
required using Entourage to import all existing
Mail.app data?
If so, the Entourage import does not delete existing
data - it imports only.
Have you deleted the archived previous system
folder?
Something to try.
Quit Mail first and using the Finder, go to Home >
Library > Mail. Copy the Mail folder and place the
copy on the Desktop for backup purposes.
Using the Finder, go to Home > Library > Mail >
Envelope Index. Delete the Envelope Index file and
empty the Trash.
Launch Mail and you will be prompted to import all
mailboxes available within the Mail folder at Home >
Library > Mail.
Select OK and allow the process to complete. This
isn't importing anything but replacing the deleted
Envelope Index file and re-indexing all mailboxes.
After the archive and install, Mail crashed immediately upon opening when using the former Mail folder and its contents. The only way to get Mail to open was to export to Entourage and re-import into Mail. Mail then opened but Feb-June sent messages were missing.
I assumed one or more of the messages was corrupt and was what brought down the system. I just accepted that I would miss those messages. Then in a Spotlight search, the messages started turning up but with no idea of where they are residing.
I did delete after two weeks the previous system folder.
I did try what you asked by making a new envelope index but it didn't help.
I am at the Apple Store in Tokyo right now. Someone who converses in English understands my problem but has no answers. -
Encrypted message on one Mac, but not the other, from same server
I run Mail.app on two Macs, both getting mail off the same Exchange server. Multiple times in the last few weeks, a message will download to one Mac and be fine, and then the other Mac will retrieve the message, and it will suddenly be encrypted. Before a bunch of garbled text, something like the following always appears:
--000_25539419161D7744ABC322B480ED5DA507650F7Acmhprdexc04netj
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: base64
If you go to Webmail on the server, the message reads fine. And it is readable on the other Mac. I tried going to View/Message and choosing "next best alternative" but those options are grayed out. Could there be anything else set locally that is making the email unreadable on one machine but not the other? The unreadable version is always on this Mac (a Mac Mini) and not the other one (a MacBook), even though both are running the same OS version and Mail.app version.Navigate to your Applications folder.
Right Click on iTunes and select Show Package Contents.
Navigate to Contents/MacOS/
Double-click on iTunes Helper(to get it running). This allows iTunes to start when you plug in your iPhone.
Open System Preferences and go to Users & Groups.
Select the Login Items tab to view the list.
Drag iTunes Helper from the Finder into the Login Items to get it to run at login.
Delete it from Login Items on the Mac you don't want it to start iTunes on. -
I go on the internet, the web site works, but then maybe when I try to go to another web site I get a message saying that Firefox is already running, but not responding and I need to close it or restart my computer. I do not know where to go to close that site so have to restart the computer!
See:
* http://kb.mozillazine.org/Profile_in_use
* https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding -
Mail message listed on iPhone but not in Mail on my iMac
Today I received a message on my iPhone but when I went to reply to it on my iMac the message did not appear even when I searched for it.
It also shows in my mail server's Webmail. This is very scary. How many other messages am I missing?Mail troubleshooting - Yosemite
What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline -
Some messages available to iPhone but not MacBook Mail
Any ideas why a few emails might be available to the iPhone mail but not to the mail app on my mac?
* iPhone is set to leave messages on server.
* message is available from server's mail interface
* not showing up anywhere in Mac Mail.
One friend in particular I have used as a case study:
I thought it was because the emails he sent had no subject line entered. That is not it as I asked him to send again with a subject. The only other common element is that it he sent it to multiple email addresses I have. All of those accounts are entered into Mail on Mac and iPhone. This however does not seem to jam on the iPhone.
Any ideas would be great!
Thank you in advance.Excellent trick Ernie.
It does show in the *all messages on server* selection. It also shows in the *That have been downloaded to my Mac*
I did find it along with 7 other emails (out of hundreds) that are in the *That have been removed from my Mac* selection.
Is there a way to determine why it was chosen to be removed? -
Imap message showing on server but not Mail
I am having an issue with Yosemite Mail in that messages previous to 2010 are not showing in the mailbox on Mail but can be seen on the IMAP server where they reside. Would there be any reason why this might be? I have re-built the mailbox. I have messages going back to 2006 so there are quite a few not showing. Is there any sort of limit to messages showing in Mail on IMAP?
Thanks.iPhone>Settings>iMessages> Turn it on
-
Why do i get text messages on my computer but not my phone
why do i get text messages on my computer on my computer but not my phone
You are getting iMessages, and they are going to your Apple ID email. Check the settings on your phone to see what you have checked for Send and Receive from, and then also check start conversation from. If you are sending from your Apple ID, this is what your friends are sending to.
Maybe you are looking for
-
MSI X48C Platinum - OC & Voltages
Hi, I have a MSI X48C Platinum motherboard. Also I have Intel Core2 Duo E8200 CPU. On my old Asus P5K-E WiFi AP I had stable 4GHz. But now i have some problems, it's my first product from MSI. Are these settings good? CPU Voltage - 1.2875V (it's goo
-
Mail problems won't go away! Help!!!
At first, I tried dragging messages that were marked "not junk" from the junk folder to the inbox. It used to work. But then, they would disappear. Then I noticed that all of my sent messages were marked as junk. Now, I keep losing sent messages. I'l
-
Post Author: Shahla Naimi CA Forum: Integrated Solutions Hello. I have the following situation. I can put data into BO, and save it as an Excel File. I have made a function in Excel that will allow me to create many different types of graphs (more th
-
Whenever i try to download the itunes update either by the auto update or going directly to the apple website and downloading it. it always starts downloading and stops when it has downloaded 15.6 MB. then it stops and does nothing else. I,m using wi
-
I was going to fast, and deleted Muse from my computer. I have paid for the subscription, and when i open CC program manager, it tells me my Muse is up to date, but I can't re-download it? any suggestions, I know this may not be a Adobe problem but c