XML messages not processed

Hi all,
I have a problem in my FTP folder. I have a text file to be processed as XML messages in XI. The problem is, it's not processing. The text file goes straight to the archive folder without processing it to an XML file. It's not in sxmb_moni and smq2. I'm not sure what happened. It was being processed before.
Thanks.
Regards,
IX

Check your sender file adapter status from the Communication channel monitoring on your Runtime Workbench.
Thanks,
Pooja Pandey

Similar Messages

SXMB_MONI : Error in Persistence Layer : XML Message Not Found

Hi Team,
There are some messages in our Production system and is in Scheduled state in SXMB_MONI and when we try to re-process those messages, we are getting message : Error in Persistence Layer and when we double click on message, we are getting the error : XML Message Not Found.
Any help on this is highly appreciated.
Thanks & Regards,
C V Jayachandra

Hi,
Please refer the below discussion
SXMB_MONI - Error accessing persistence layer
regards,
Harish

BPM error : Message pipeline PE_ADAPTER unknown XML message not found. Help

Hello All,
I have done 3 steps in BPM
RFC --- BPM --- RFC
RECEIVE step ==> Opens SYNCH ASYNCH bridge and receives RFC request message
SEND synchronous ==> to send RFC request and get the RFC response.
SEND ==> Closes SYNCH ASYNCH bridge and Send's response back to the RFC.
In my last send step (response back) I am getting message
"Message pipeline PE_ADAPTER unknown XML message not found" .
Pls help

Hi Rick,
check out this SAP Note: 1087532
Regards
Dominic

Client Proxy: XML message not well-formed unexpected symbol 'target

Hi,
I'm trying to get a client proxy to work based on several blogs (1387,1672)
The error I'm getting now is:
<SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="XML message not well-formed in node (7 ,49 )unexpected symbol: 'target'" p2="" p3="" p4="">PARSING.GENERAL</SAP:Code>
<SAP:Text language="EN">Parsing error: XML message not well-formed in node (7 ,49 )unexpected symbol: 'target'</SAP:Text>
</SAP:ErrorHeader>
The proxy has been generated successfully
in SXMB_ADM R/3 role is application system and uses dest://rfc_dest
The rfc destination does not accept ?type=entry but apparently also does not need it. When I test the connection it gives a statuscode 200 (not 500)
SLDCHECK works fine.
Not sure where to look for this error?
Any ideas?
Thanks
Tom

Hello Smitha,
I forgot to mention that the message is still in R/3, it has not arrived in XI yet, so the error is visible in SXMB_MONI in R/3.
Also it is just a dummy message, It only contains one node and that is called differently:
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:IF021_HTTP_MSG xmlns:ns1="http://oce.com/xi/eu1/R3CCSEU/IF021_Ordrsp_TD_to_Ordrsp_CCS" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<IF021_DT>GetOrdRsp</IF021_DT>
</ns1:IF021_HTTP_MSG>
Any mappings only take place in XI itself, and even there I have no node called target.
Regards
Tom

Messages not processed

Hi all,
I have a problem regarding messages. There are some text files in the FTP folder that are not being processed by XI. They are not converted to XML messages. Some are processed while some are not. Please advise. Thanks!

Hi,
>>>There are some text files in the FTP folder that are not being processed by XI.
it can only mean 3 things:
- the file apdater is not configured to pick them up
- the file adpater is in error status - check communication channel monitor in RWB
- the file adapter is processing too many messages and it cannot pick up anymore - check it in messagingsystem/monitor - number of used queues
Regards,
Michal Krawczyk

Proxy messages not processed in PI 7.1 pipeline coming from local client

Dear experts,
We have recently installed a PI7.1 system with two clients:
200 - Integration Server
250 - Local Integration Engine
Now, when we send proxy messages from the 250 client to the 200 client,
the messages are not processed in the integration server. The message
does arrive as we can see in SXMB_MONI, but there is no receiver determination
or what-so-ever executed. In SXMB_MONI we can see that only the SENDER
pipeline is executed.
Proxy messages from 6.20 and 7.0 systems to IS are properly processed.
Ofcourse the 250 client is defined as an application system in the integation engine
configuration (SXMB_ADM).
regards,
Jeroen

In SXMB_MONI we can see that only the SENDER pipeline is executed.
Yes. Even if no receivers are configured the data from sender to XI should be visible in sxmb_moni.
Check smq1 at XI. There could be some problem with the technical system for client 250.
Regards,
Prateek

Message not processed after technical routing

Hi ,
I have a SOAP ->ABAP Proxy (R/3) scenario that sometimes not processed completely. When checking the message in SXMB_MONI I notice a grey dot (which means log version) in the status column next to the message, Upon opening the message I can't see any errors.
The message has gone through the following steps.
Inbound Message
Receiver Identification
Interface Determination
Message Branch According to Receiver List
Request Message Mapping
Technical Routing
But final stage call adapter not executed so i came to know that response message not reached to XI.
This is occuring once or twice for every 25 to 30 messages.
Can any one provide some suggestions to rectify the above issue.
Thanks & Regards,
Arun.

Check out the below things,
1. Check for which input data it is giving. (Any specific data).
2. This may happen becaus of time out. (Huge data processing)
Also check out below link,
['Log Version' status in 'SXMB_MONI']
Resend the message from sender and it will work properly.
Log version means "Waiting for response" and liable to fail if response not received on time.
Edited by: Siddhesh Pathak on May 13, 2009 12:10 PM

Print message not processed

I am able to take a print preview and print after attaching the custom message in purchase order but after saving it .
The message says that it is still in process and it is not processed.
Any idea where to check and where is the problem

check sp02 whether processing has been completed or not..also try this...
check the output immediately check box when pop up for print options are displayed..after that save it try again n see what happens

XML Message Not Generated in SUS SRM 4.0

Hi !
In Supplier Self Service(SUS) SRM 4.0 we did a
development for ASN creation through file upload .
It's a <b>BSP</b> Application .
Vendor uploaded the file for ASN creation .
Their generated ASN No. which are in Standard tables.
But for Some of them No XML Messages Genrated which
suppose to pass backend SAP R/3 .
Anybody having any idea where exactly these XML
Messages are?   We have searched through SXMB_MONI
& checked all qRFCs.
But unable to find their XML messages.
Looking forward your ideas.
Regards
Sachin S M
<b></b>
Message was edited by: Sachin S M

Hi,
Can you tell me if the next scenario is possible with EBP 5.0 (WAS 6.40) but without XI.
We need to develop an application to allow the supplier to upload an Invoice in XML and save it in EBP.
I was thinking on using a BSP application with an input field to browse local PC and pick up an Invoice XML file. Then post the XML and parse it in the BSP application and save the invoice in EBP.
Do you have any experience on it or some documentation?
We have EBP 5.0 but don't want to install an SAP XI.
Thank you

BPM :: Messages not processed at outbound side

Hi Experts,
We have 1000+ synchronous messages with BPM for only two days in July which havent processed fully. Now oncoming messages are getting processed fine, but the messages which were waiting for outbound processing from July are still waiting.
inbound side there is a success flag and outbound side it is showing a clock symbol(looks like scenario is collecting / waiting)... cant see any failed/waiting messages iin queues .. when I checked the workflow logs few are showing workflow manually edited and processed after exception.
The date messages were triggered are 10/Jun and seems one or more messages were edited on 17/jun later.
Now we would like to know which workflow thrown the exception and what they have done during manual operation.
And how to process the remaining holding messages.
Thanks in advance for you ideas and suggestions.

Hi,
As you pointed out in your post that
"inbound side there is a success flag and outbound side it is showing a clock symbol(looks like scenario is collecting / waiting)... "
Now you have not explained your scenario completely. Still from the problem statement I can say that The BPM is waiting for some messages. There are three possible scenarios where you can see the clock symbol.
You have the option of collecting multiple messages for an interface and bundling them into one message, for example, individual sales order items into one sales order. To do so, you need to define a receiver step within a loop. The loop can finish in a variety of ways.
Payload-Dependent => The loop finishes when the number of messages received matches the number specified in the payload of the messages.
Time-Dependent => The loop finishes at a specified point in time.
Message-Dependent => The loop finishes when a specific message is received.
Once all the messages have been received, a transformation step bundles the messages collected in the container element and from them creates a message in the container element .This message is then sent by a subsequent send step.
The processes use one of the abstract interfaces as an inbound interface, and the other as an outbound interface.
Your BPM cannot be time dependant, otherwise it would have completed processing by now.
Either your BPM is message dependant or payload dependant. You need to find this out.
Check out the correlation (if) used in BPM, and the condition in BPM which stops the message collection.
Plesae check SXMB_MONI and study the messages which have been succesfully processed by the BPM, so if your BPM is message dependant you have to find out what message it needs to stop collecting the message, this you can do by studying the successful message processed by the BPM. In this case your BPM will contain a FORK step. In one branch of FORK step there will be a receive step, this is the step where you can find the message required to complete waiting stage of the BPM.
Check if this message has arrived or not.
If your BPM is Payload dependant, find out whether number of messages received by the BPM matches the expected count or not. In this case the BPM must have a container operation to count the messages received. If the count is less than required value, the BPM will remain in waiting state.
regards
Anupam

Messages not processed from IP_OUT_QUEUE

Hi all,
I have enqueued the message to IP_OUT_QUEUE and consumer as B2BUSER. Still the message are not getting processed from the Queue. From the b2b.log, I see the following statements "***B2BListen turned off, will not listen on IP_OUT_QUEUE for messages***
What could be problem... It used to work before... Nothing has changed after that.... any clues??? I am using 10.1.2
2009.09.08 at 23:43:33:449: Thread-9: Repository - (DEBUG) Cache Purge Size = 3000
2009.09.08 at 23:43:33:449: Thread-9: Repository - (DEBUG) Cache Load Factor = 0.75
2009.09.08 at 23:43:33:452: Thread-9: Repository - (DEBUG) CatalogDriver manager == oracle.tip.model.metadata.CatalogMetaManager@8a0544
2009.09.08 at 23:43:33:453: Thread-9: Repository - (DEBUG) CatalogMetaManager getDriverjava.lang.InheritableThreadLocal@2f0df1 oracle.tip.repos.core.driver.CatalogDriver@2e323
2009.09.08 at 23:43:33:453: Thread-9: Repository - (DEBUG) CatalogDriver manager == oracle.tip.model.metadata.CatalogMetaManager@8a0544
2009.09.08 at 23:43:33:455: Thread-9: Repository - (DEBUG) CatalogMetaManager getDriverjava.lang.InheritableThreadLocal@2f0df1 oracle.tip.repos.core.driver.CatalogDriver@2e323
***2009.09.08 at 23:43:36:433: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter***
***2009.09.08 at 23:43:37:016: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned off, will not listen on IP_OUT_QUEUE for messages***
***2009.09.08 at 23:43:37:020: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message***
2009.09.08 at 23:44:03:091: B2BStarter thread: Deployment - (DEBUG) Query Configurations null Lifecycle status Active exclude design true
2009.09.08 at 23:44:03:092: B2BStarter thread: Repository - (DEBUG) Persistency manager == oracle.tip.model.metadata.CatalogMetaManager@8a0544
2009.09.08 at 23:44:03:092: B2BStarter thread: Repository - (INFORMATION) Entering Use Case: queryConfiguration
2009.09.08 at 23:44:03:092: B2BStarter thread: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2009.09.08 at 23:44:03:093: B2BStarter thread: BusinessLogicLayer - (DEBUG) Push Stack: queryConfiguration
2009.09.08 at 23:44:03:093: B2BStarter thread: Repository - (INFORMATION) CatalogDriver.runQuery() select ID , CLASSTYPE , NOTM , ISSEEDED , canreactivate , name , created , bilevel , LifeCycleState , description , description_clob , warningmessage , warningmessage_clob , status , type from TIP_Configuration_t t where ( LifeCycleState= ? )
2009.09.08 at 23:44:03:094: B2BStarter thread: Repository - (DEBUG) CatalogDriver.setBindVariables():
2009.09.08 at 23:44:03:094: B2BStarter thread: Repository - (DEBUG) Bind Variable : index = 2 value = Active
2009.09.08 at 23:44:03:097: B2BStarter thread: Repository - (DEBUG) CatalogDriver manager == oracle.tip.model.metadata.CatalogMetaManager@8a0544
2009.09.08 at 23:44:03:097: B2BStarter thread: Repository - (DEBUG) LargeStringImpl(InternalObject, String) - constructor
2009.09.08 at 23:44:03:098: B2BStarter thread: Repository - (DEBUG) Object OID - FE5E6FB76BBF25DDE030578C9515137B-22-1-1
2009.09.08 at 23:44:03:098: B2BStarter thread: Repository - (DEBUG) LargeStringImpl(InternalObject, BLOB) - constructor
2009.09.08 at 23:44:03:099: B2BStarter thread: Repository - (DEBUG) Object OID - FE5E6FB76BBF25DDE030578C9515137B-22-1-1
2009.09.08 at 23:44:03:099: B2BStarter thread: Repository - (DEBUG) LargeStringImpl.setBlob() - extracting blob contents to stringBuffer
2009.09.08 at 23:44:03:099: B2BStarter thread: Repository - (DEBUG) CatalogDriver.constructBaseObject()
20
Edited by: Praveen I on Sep 9, 2009 12:18 PM

Hi Pravin,
Check b2b_instancemesage view for related messages and make sure that payload is coming properly.
Also make sure that you have atleast one configuration in deployed state. Also make sure that transportServlet is up and running by accessing below url -
http://localhost:port/b2b/transportServlet
Also try by using the enqueue stubs which comes as part of tutorial (Ora_Home/ip/tutorial)
How are you enquing message to this queue? Please mail the b2b log in debug mode to my id (in my profile)/post the same here.
Regards,
Anuj

Messages not processed by integration server after SP09 to SP16

Operating System: Windows NT 2003 Standard edition Service Pack 1
Database: SQL_Server_8.00, DBSL:640.00 Patch Level: 100
ABAP Kernel: Non Unicode; Release: 640; Patch: 109;
XI: Version 3.0; Service Pack Stack:16
Host: PEARL; IPAddress: 10.1.1.13
We upgraded from service pack stack 09 to 16 and since then no messages
are getting routed to integration server. We tried a cache access
though TCODE: SXI_CACHE and it said "if_http_client receive
http_communication_failure". Then we went to ICM monitoring through
TCODE: SMICM and saw that the http service that runs on 8000 port is
inactive when we tried to activate it gave an error. Here is the
snapshot from the trace file.
[Thr 3492] *** ERROR => NiIBind: service '8000' (8000) in use
[nixxi_r.cpp 3845]
[Thr 3492] *** ERROR => NiIListen: NiBind (rc=-4) [nixxi_r.cpp
767]
[Thr 3492] *** ERROR => IcmBindService: NiBuf2Listen failed for host
PEARL:8000 (rc=-4): NIESERV_USED [icxxserv.c 1549]
When we tried to access runtime workbench through integration builder
webpage it says "page not found".
When we tried to login to the J2EE visual admin using the default
account(J2EE_admin) it gave the
error "http://pearl:8101/msgserver/text/logon returned empty list of
connection parameters."
In SAPMMC we looked at the system log and saw the error "SAP Basis
System: Operating system call gethostbyaddr failed (error no. 0 )".
We tried restarting the whole server but to no effect.

since your OS is Windows try following in command at prompt
C:>netstat -a
or
C:>netstat -an
one of the above will work in NT, the list shows the listening (Open) ports and ESTABLISHED (used)..check for the 8000 which is your HTTP port.
Also in SAP check the t-code "SMICM" and then goto services and see the HTTP services running without error or not?
Hint: Port names are defined in services file located at C:\WINDOWS\systemXX\drivers\etc\services file..

RE: Validating XML message...

Actually I stand corrected. XML Spy does seem to provide an OLE API to XML
validation ( the isValid method on the IDocument class ) although I haven't
tested it yet.
In my previous post I was thinking of another XML product I tested earlier
in the week which did not.
-----Original Message-----
From: Shaughnessy, Kevin
Sent: Friday, April 20, 2001 08:59
To: 'Rumen Georgiev'
Cc: [email protected]
Subject: RE: Validating XML message...
Rumen,
One idea that is possible is to use an OLE interface to a 3rd party XML
product. This assumes your logic which needs to validate is running on a
Windows box. But if so, it may work. Many products have type libraries which
can be run through OLEGen to create Forte classes. Then you can use TOOL to
talk OLE to that product.
For example, XML Spy 3.5 has a type library from which I created a Forte
project. Unfortunately this product didn't offer any extra features than
Forte's XMLParser ( i.e. the API didn't allow me to validate the XML ) so I
am back to using Forte's parser until I can test another product. If you
find one that does what you want let me know.
I've used OLE a lot with Forte to get functionality from other products (
VISIO, MS Office ) that Forte doesn't provide and it works well. Its a
platform dependent solution but one that may work for you.
Kevin
-----Original Message-----
From: Rumen Georgiev [mailto:[email protected]]
Sent: Friday, April 20, 2001 07:21
To: [email protected]
Cc: [email protected]
Subject: RE: Validating XML message...
Hi Kevin,
From the answers I've got it seems Forte parser is anon-validating one. So we have to look for an external
tool to validate these messages. What I am concerned
about is the integration with Forte.
Thanks for your help!
Rumen
Rumen,
From Tech Note 11811:
"ParserFactory.makeParser() will return a default,
non-validating XML parser."
My experience is that Forte's default XML parser will
not validate but will throw an exception if the XML
document is not well formed. I'm using the DOM
model and this exception happens on the
Document.importDocument( ) method.
If you want anything more than that you'll have to do
it externally.
Kevin-----Original Message-----
From: Rumen Georgiev [mailto:[email protected]]
Sent: Thursday, April 19, 2001 11:49 AM
To: [email protected]
Subject: Validating XML message...
We have to validate inbound XML messages before
processing them. The guys on the other side are
following XMLSchema recommendations to create their
messages using xsd file for validation. We plan to
use XMLParser Forte library and as far as I know it
validates against dtd file (haven't tried yet). If
this is true we have two options:
1. Find a program to convert xsd into dtd file and
use Forte XMLParser for validation.
2. Validate the message beforehand with an external
tool. That means integration between Forte and this
tool.
I would appreciate any help with either approach. Do
you know of a program doing xsd into dtd? Have you
used any existing tool on the market to validate
using XMLSchema? Or may be there is another solution
to
this?
Thank you in advance,
Rumen
=====
Rumen Georgiev
Forte Developer
EXE Technologies
(610) 872-4400 Ext.222
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/

Hi,
there is some change in the XMLSPy4.3/XMLType Library 1.2 :
Validation
One common task on documents is to validate them against an assigned schema or DTD. If the XML file has no schema or DTD already assigned, use "Document.AssignSchema" or "Document.AssignDTD" to add the necessary references to the document.
Examples:
objSpy.ActiveDocument.AssignSchema "C:\mySchema.xsd", False
or
objSpy.ActiveDocument.AssignDTD "C:\myDTD.dtd", False
If you want the user to select a schema or DTD, pass True as the second parameter to these functions to display a file-dialog. These methods only put the reference into the document and do not check the existence of the specified file. If the file path is not valid, the validation will fail.
After you have assigned a valid schema or DTD reference to your file, you are able to validate it with "Document.IsValid". IsValid needs some out-parameters that must be declared as VARIANTs to be accessible from script languages like VBScript and JavaScript.

How to loop through many XML messages and parse them ?

Hi All
I have been trying very hard to loop through many XML messages and process each of them. Let me first explain the problem -
Suppose I have the following String -
<xyz>
<abc>happy</abc>
</xyz>
<xyz>
<abc>new</abc>
<xyz>
<xyz>
<abc>year</abc>
</xyz>
I have to process each message within the <xyz></xyz> tag and find the falue of <abc> element (happy, new and year).
The extraction of <abc> value is very simple, I am using SAX parser's startElement() method to check every element's name and if the element's name is <abc> pick up the value. But I am not able to loop through the different messages within the <xyz></xyz> tag.
I am thinking of using another DOM parser -
DOMParser domParser = new DOMParser();
StringReader rdr = new StringReader(inputXML);
InputSource src = new InputSource(rdr);
domParser.parse(src);
Document doc = domParser.getDocument();
NodeList nodeList = doc.getElementsByTagName("xyz");
Now I can loop through this nodeList, but not able to. Is using the DOM parser and NodeList the preferable way of lopping through the messages, then how I can loop through ? Or is there any other way ?
I have been trying on this for quite a few days, but not able to. Can you please help me out ?
Thanking you in advance ....
Nirmalya Sinha

Hi,
Try using the SAX reader from the dom4j package. The document object that you receive contains methods for getting the root elements and with that you can traverse down to the sub elements of it.
Hope this was of some help.

XML message is not processed in SXMB_MONI

In SXMB_MONI txn code (PI 7.0),we are not able to get updated with any XML messages from a folder on application server what could be a reason for this problem..can we see the log details of the same from anywhere .How can we rectify this problem
I would appreciate all your help

In SXMB_MONI txn code (PI 7.0),we are not able to get updated with any XML messages from a folder on application server what could be a reason for this problem..can we see the log details of the same from anywhere .How can we rectify this problem
I would appreciate all your help

XML messages not processed

Similar Messages

Maybe you are looking for