XML output changed after tools release

Enterprise One 812. XML output to print invoices is now missing two fields. Layout of xml is now different in DV/PY compared to PD.
* E1 Tools Release 8.98.32 installed in DV/PY - problem started after this.
* The problem does not exist in PD but it does exist in DV and PY.
* The source for the xml template and report definition is a custom UBE for invoice printing and has not been changed in any environment.
* The xml template and report definitions have not been changed.
* No processing options have changed.
* Downloaded the PD RTF and ran it locally against xml data from PD and PY. The PD xml displays the fields and DV/PY do not. This proves the RTF is not different between environments.
To try and solve, ran ER compare of custom base object between PD and DV/PY and found no diffs. Also tried a new RTF template and report definition, still doesn't work. Ran a package build to push the PD custom base object into DV/PY, still didn't solve.
Is it possible the Tools Release in DV/PY caused this XML problem? Any help is greatly appreciated, running out of ideas.
Thanks in advance...

Hi
Sorry, I dont know enough about the JDE patching and environment. If you suspect a regression issue, I would log a service request with JDE support and get them to ping development for some help on confirming the issue
Regards
Tim

Similar Messages

How to make field key for user fields cant be changed after project release

Dear Expert,
How can we make field key for user fields cannot be changed once we release the project/wbs?
Cheers,
Nies

Do you mean 'field key' in the project profile in SPRo?
I think after a project is created a change in the field key wont affect the fields in CJ20N..
Can you verify?
Regards
Ramesh

Best way to back out data changes after a release

Hi,
I'm trying to decide on the best way to backup some production data in case a release fails and we need to roll back the changes. This would be for data updates only, not schema changes. We have extremely limited access to production, and another team handles all the RMAN backups. The people who actually implement our releases are also pretty prone to mistakes.
I have thought of two options. The tables we want to backup are about 9 MB total in size (it's about 10 codes tables).
1. Create a bu table for each of the tables before the release. So for JENNSTABLE, we would create a JENNSTABLE_BU using CTAS. If we need to revert, we can drop JENNSTABLE and rename the JENNSTABLE_BU accordingly. The bu table would remain in production until the next release, where it would be reused again. This would be really easy to script and therefore avoid any mistakes by the production support team who implements our instructions. We would also be able to determine what values changed by querying the bu table at any time (currently old values are not retained anywhere).
2. Use datapump to export the 10 tables, then truncate the tables and import the previously created files to restore the original data. I'm hesitant to use this method because I've never used datapump before, and as we don't have access to the servers, creating file system files makes me a little nervous. If I used a bu table, I can logon to the database and at least tell if it exists.
Are there any preferred methods for doing this (besides restoring a table w/ RMAN)? Is there a best practice? Any advice is appreciated!
-Jenn
Oracle 10g
UNIX Solaris

Hi sb92075,
That's a good suggestion. FLASHBACK_ON is set to no on my database, but if I understand correctly, I can still do a FLASHBACK TABLE and the undo data would be used. Is that correct?
My concerns w/ using Flashback are ..
1) The client might decide to rollback the changes a week after they've been executed. The undo data might not be available and the flashback would fail.
2) If any of the following processes are part of the release, the flashback wouldn't work:
"The following DDL operations change the structure of a table, so that you cannot subsequently use the TO SCN or TO TIMESTAMP clause to flash the table back to a time preceding the operation: upgrading, moving, or truncating a table; adding a constraint to a table, adding a table to a cluster; modifying or dropping a column; adding, dropping, merging, splitting, coalescing, or truncating a partition or subpartition (with the exception of adding a range partition)."
Can you address those two issues? Thanks so much for taking the time to respond! This forum has helped me immensely with my work.
-Jenn

Objects not changed after successful release of transport requests

Hi All,
We added two free characteristics to a query and collected that query in a transport request in development.The request is released and imported successfully in quality.The problem we are facing now is that the two characteristics are not reflected in the query.But the hexadecimal numbers for the two characteristics are captured under the released transport request in Quality.
Could someone please help me out in solving this issue.............
Regards,
Shravani

Hi,
Thanks for the prompt reply.We have collected it through transport connection only.As I have mentioned in the thread import is successful ,hexadecimal number is present under the transport request but the changes are not present in the query.Could it be the problem with importing?...................
Regards,
Shravani

How to block changes in purchase order after purchase release

Dear all
Can u please tell us how to block any changes in purchase order after purchase order is released...
(We don't want any line items addition or quantity addition or any changes once purchase order is released..)We wanted this for a particular purchase order type only
Regards
Sudha

Dear Sudha
Yes it is possible to confiquire your system insuch a way where once if the PO gets final relase then it cannot be changed.Only possiblity that will be available for the user to make chanegs in PO is possible when the final release is to be reset and then make the changes.
Release Indicator: specicfies whether the PO documents is blocked or can be processed for the follow functions.
You can define the release indicators you need for your release procedure:
The Released indicator is used to specify whether messages (PO documents in output format) may be transmitted for a purchase order with this indicator.
The Changeability indicator shows the effect of changes to the PO (a change to a PO may require a new release strategy to be determined, for instance).
By means of the Value change indicator, you can specify that the release strategy is to be re-started if a PO is changed and the value of a PO item thereby increases by a certain percentage (e.g. 10%). Set the Changeability indicator to "4 - Changeable, new release in case of new strategy or value change" or "6 - Changeable, new release in case of new strategy or value change/outputted" and enter a percentage in the Value change field.
And after that you can specify release statuese where you can specify which release indicator/status a PO is to have after having been released via a certain release code.
and after release simulation .
Test for the PO change after final release System will not allow you tomake changes by giving the message that the release indicator doesnot allow you make the changes in PO.
Regards
Sunny

Changeability of PO after final release

Dear Gurus,
My client requirement is, PO should not be able to be changed once final release has happened. They should be able to change only after revoking the final release and again releasing it.
So, if I put changeability of Release indicator as "1", it will not allow to do any changes after final release including revoking the PO once it is outputted. How to resolve this?
Thanks,
Satish

See the changeability option under Release group
1     Cannot be changed
2     Changeable, no new determination of strategy
3     Changeable, new release in case of new strategy
4     Changeable, new release in case of new strat. or val. change
5     Changeable, new release if new strategy/outputted
6     Changeable, new rel. if new strat. or value change/outputted
     Changeable, new release in case of new strategy
to my understanding option 4 is more relevant to your requirement

PO Release Strategy not changed after deletion of few line items with less

Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
Dear Friends
We have issue with PO Release strategy. We have created the PO. with release strategy with multiple approvers. After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong.
Details of the PO
PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
Are there any OSS notes available to correct his bug.
Please let me know if you need more details
Thanks in Advance
Thanks
MVS

Hi,
release indicators change it to 4.It may works. Please explore to all 6 indicators..........
i.e,
1-cannot be changed
2-changable,no new determination of strategy
3-changable,new release in case of strategy
4-changable,new release in case of strategy or value change
5-changable,new release if new strategy/outputted
6-changable,new release if new strategy or value changed/ outputted......
And check Characteristic description and value in Classification of Release strategies ........
I hope this will help you. Thanking you.
Regards,
Venkat.

Po header change after release

Dear All
We require list of PO for last one month PO header or tiem level text has been changed after release
Regards
Dishant

Hi,
You can use the following report to get you all the changes in PO. Ask your ABAP person to run it for you.
http://www.sap-img.com/mm001.htm
It is an ABAP program contributed by one of the SAP members, which reports all the changes made in PO and list out the details per document.
Hope it helps,
Best regards
Amit Bakshi

Po change after release and printout

Dear Experts,
My client require if we change the PO in any field ( expect qty and amount ) our po should be go in the po release again we using release indicator 4 and 6 but we want release should be go if we change any field like date tax code text payment terms etc.
RCR

Hi,
System determines new release strategy only if there are any changes in the characteristic values in the PO. (The characteristics that you must have defined for the PO release strategy configured in your case, like PO value, document type, Plant, etc.)
By your question, it appears that you do not want to change even the date and text fields after PO is released, and in case you do the changes, then again the PO has to be released.
For this, you need to use the release indicator, which won't allow any changes after PO is final released. Hence, when any of the field is required to be changed, the release will be required to be cancelled first, then the changes can be done. After doing the necessary changes in your fields, like, date, text, etc., PO will again be subjected to release, and will have to be released again to proceed further.
Regards,
Zafar.

Purchase order changes after release

Hi,
How can I block a purchase order to any changes after release it and then, in case of need, mark for deletion the purchase order itens?
Regards,
Maria

Hi,
To block any changes in the purchase order to after release, set Changeability indicator as 1 for Release ID "R" in following path & save.:
SPRO ->MM - Purchasing -> PO -> Rlease Procedure for PO -> Define Release for PO -> Release Indicator
NOTE:If you set Changeability indicator as 3, PO can be changed after release and trigger a new release strategy based on value changes.
Regards,
Biju K

Output message of PO in ECC not processed automatically after order released in GTS

Dear Experts
PO created in cobalt was blocked in GTS due to legal control. output message of PO was blocked, after the PO was manually released by the user next day, AU open the PO and saved it. output message got processed.
Can you please let me know, why system is not processing the output automatically after the PO is released in GTS.
Is this the standard process?
Thanks
Kiran

Hi Kiran,
This is called follow on function in GTS.
When document is released, you could trigger background job regularly to process these document.
Open the area menu for SAP GRC Global Trade Services in your feeder system (with transaction code/SAPSLL/MENU_LEGALR3) and choose Recovery Follow-On Functions in Feeder System .
Choose one of the following entries to configure the follow-on functions for the selected application level: Materials Management Trigger Follow-On Functions for Purchasing Documents
Check more details in help document.
Trigging Follow-On Functions after Document Release in SAP GTS - System Administration - SAP Library
Best regards,
Vincent

What happen if I change a role after I released the transport?

Here is my Scenerio:
1) Assuming I've created a role : ROLE1 in DEV
2) I create a transport TR1 with that ROLE1, NOT yet released.
3) Then I added ME21 txn to ROLE1.
4) Then I released the transport TR1
5) Then I remove ME21 txn from ROLE1.
6) Then I transport role from DEV to QA.
Q1) I would expect In QA, ROLE1 will still has ME21. - True?
Q2) TR1 will be the snapshot of the ROLE1 when I release the transport TR1 - True?
Now, I want to delete the ROLE1,
A) I would need to create another Transport TR2 first with ROLE1 in DEV
B) Then delete ROLE1 in DEV
C) Then release Transport TR2
D) Then I decided that I still need ROLE1. (oops)
Q3 I should not transport TR2 so that it won't delete it in QA. - True?

Hi Dominick,
>
> 1) Assuming I've created a role : ROLE1 in DEV
>
> 2) I create a transport TR1 with that ROLE1, NOT yet released.
>
> 3) Then I added ME21 txn to ROLE1.
You should add the role again to the Transport to avoid inconsistency
> 4) Then I released the transport TR1
>
> 5) Then I remove ME21 txn from ROLE1.
>
> 6) Then I transport role from DEV to QA.
> -
>
> Q1) I would expect In QA, ROLE1 will still has ME21. - True?
Answer: If you reassign the role to the TR then you will get.
> Q2) TR1 will be the snapshot of the ROLE1 when I release the transport TR1 - True?
Answer: TRUE (but without ME21 if you don't add the change to the CR - see below for detail discussion)
> -
>
>
> Now, I want to delete the ROLE1,
>
> A) I would need to create another Transport TR2 first with ROLE1 in DEV
>
> B) Then delete ROLE1 in DEV
>
> C) Then release Transport TR2
>
> D) Then I decided that I still need ROLE1. (oops)
> -
> Q3 I should not transport TR2 so that it won't delete it in QA. - True?
Answer: TRUE. And if you want the role again back to DEV without recreating it, please download the role from QAS or PROD and then Upload it to DEV. After that you need to generate the Profile of the role.
> -
FYI: When a Change is Included into a request to send in other systems, then this request is called "Change Request" (CR). After Releasing, the CR called as "Transport request".
CRs are basically (in layman language) the Pointers to the DB changes performed. These are included into a CR as "Task". A CR can contain multiple Tasks created by different users.
Please note if this is a Workbench CR then it is ONLY editable by that particular user(owner of the Task). Also the Object captured in a Task of a WCR possesses a Lock till it gets released and thus can't be added to any other Task of a different CR. The Objects are unlocked when the Tasks and the CR is released respectively.
There are no Object Lock for Customizing CRs ... like your TR1 which contains Creation / Deletion of roles.
After the release of each Task, all Objects contained into every Task are transferred to the Change Request. After release of all Tasks, the CR owner can release the CR and thus the Transport Request has been initiated. Technically, at this time, a copy of Data from the Database of DEV captured under the headers of each Tasks are written to Data Files in Central Transport Directory.
Now coming to your queries..... there are no such synchronization happens for a Task if the Objects are edited in different time frames before Release. So, when you added ME21, again you need to assign this change to the same CR. (_Answer to your Q1_)
Please let me know if you have any confusion / query.
Regards,
Dipanjan

I need to create buttons in which the color changes, and stays on after you release the button

I need to create buttons in which the color changes, and stays on after you release the button. The hard part is the buttons must change independently of each other.
To get an idea of some of things I’ve tried I’ve tried making the movie with two frames.
When I click the button it switched to the new frame which would show a movie clip,
Unfortunately all buttons would change color together and don’t see how to make it so that they change independently.

you must use movieclip buttons and code for their frame changes.

HT201184 My computer is infected with the DNS changer virus. I installed the Macscan DNS Changer Removal Tool but after restarting the virus is still there!

My computer is infected with the DNS changer Virus. I installed the Macscan DNS Changer Removal tool but after running it and restarting the laptop, the virus is still there .

"Hinweis: Für die korrekte Durchführung dieses Tests dürfen keine Proxy-Server in den Einstellungen Ihres Webbrowsers aktiviert sein. Diese werden häufig bei Firmenrechnern verwendet. Sie sollten daher im Zweifel Ihren IT-Support kontaktieren, der Ihnen mitteilen kann, ob dieser Test in ihrer Umgebung genutzt werden kann."
Google Translate:
Note: For proper implementation of this test may not be a proxy server enabled in your browser settings. These are often used in corporate machines. You should contact your IT support in doubt, you can tell whether this test can be used in their environment.
and
fane_j wrote:
Does the US site use a different script, which works even when proxies are used?
No idea.

Removed all changes in Java source after installing Release 2 Update 1 Hot

I happened the same problem twice after installing Release 2 Update 1 Hot Fixes:
Operations as followed:
1. Open the project
2. Modify some source code of the backing bean and then save the modifications.
3. Click the design tab to display the UI of this page and click on a button.
4. Click the property 'action' of this button in the property tab.
5. The dialog shows and I choose 'Unset property'.
6. Go back to its backing bean and guess what...
7. All the changes I made in step 1 are all gone. The source code of the backing bean goes back to the status right after I opened Creator2.
I discussed the problem with my colleagues and they have similar situations after installing Release 2 Update 1 Hot Fixes. They may do some other things in the UI Design page and when back to the backing bean, the changes to the backing bean since Creator 2 is opened are all gone and the source code of the backing bean goes back to the status right after Creator2 is opened.

This has been covered....
http://swforum.sun.com/jive/thread.jspa?threadID=105962&tstart=60
:-)

XML output changed after tools release

Similar Messages

Maybe you are looking for