XML Report output contains no report column name in it...

Hi Everyone,
I am trying to generate service contract report in XML report. I have done report builder part and registered concurrent program with the .rdf file.
Now when I run the concurrent program for XML output for template load purpose, I get the below output.
<?xml version = "1.0" encoding = "UTF-8" ?>

<TMP003>
<LIST_G_RENEWAL>
</LIST_G_RENEWAL>
</TMP003>
But I could not find any of my query fields like Contract_num, Customer...
Can someone please tell me where am i missing and what...
Regards,
R. Bala

did you put (or update) rdf report to needed dir like <TOP_DIR_FOR_APPLICATION>/reports/US ?

Similar Messages

Oracle Apps.XML reports ending with warning when the report output contains

Hi I have XML reports. When we run these reports as concurrent program through Oracle Apps. window and if the report output contains special characters(like Chineese data) in between of English, then the concurrent program is ending with warning. If we remove special characters then it is working fine or when we run the report query directly from backend it is working fine.
We are importing this data from legacy system into oracle apps. and we can't control these characters or decode them with some other charactes.
Can any one guide me how to get the XML report output with special characters.
Thanks in advance.
Chandra Babu Lankipalli.

Hi Hussein,
The concurrent program is ending with Warning. It is unable to publish output file.
For the same when we remove special characters and run the program it is completing and generating the
output. The log fine is as follows when the data file contains special characters.
Custom Application: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXFA_AR_WIN_EXCEPTION module: XXFA AR Wintrack Customer Interface Exception Report
Current system time is 23-MAR-2009 05:33:19
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_CUST_ERRORED='3'
P_CUST_SUCCESS='0'
P_CUST_TOTAL='3'
P_REQUEST_ID='4661283'
P_USER_NAME='SYSADMIN'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
/d01/oracle/fadevora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /d01/oracle/fadevora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Report Builder: Release 6.0.8.25.0 - Production on Mon Mar 23 05:33:19 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 4661284 on node FAHQSNA01SFTD03 at 23-MAR-2009 05:33:20.
Post-processing of request 4661284 failed at 23-MAR-2009 05:33:21 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT -------------
Not printing the output of this request because post-processing failed.
Finished executing request completion options.
Concurrent request completed
Current system time is 23-MAR-2009 05:33:21
Thanks in advance.
Chandra

Report data binding error unknown column name

Hi,
I am having a problem with the new 7.02 update of Report
Builder. The issue is it's not finding my SQL query.
I have wrote my query initally in the advance mode, and it
doesn't seem to reconize it. Is there an issue with this?
I did manage to fix one of my reports by using the basic mode
and selecting all my tables and seting my linkage and criteria.
I have other computers that i have not updated to 7.02 and
they do not have this issue. Below is the error:
Error Occurred While Processing Request
Report data binding error Unknown column name : work_phone.
Please try the following:
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0;
.NET CLR 1.1.4322; .NET CLR 2.0.50727)
Remote Address 127.0.0.1
Referrer
Date/Time 13-Jul-06 02:33 PM
Stack Trace (click to expand)
coldfusion.runtime.report.Report$ReportDataBindingException:
Report data binding error Unknown column name : work_phone.
at
coldfusion.runtime.report.Report.runReport(Report.java:420)
at
coldfusion.filter.ComponentFilter.invoke(ComponentFilter.java:96)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:225)
at
coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.xml.rpc.CFCServlet.invoke(CFCServlet.java:106)
at coldfusion.xml.rpc.CFCServlet.doGet(CFCServlet.java:157)
at
javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at
org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at
javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:349)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:457)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:295)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
This report works in 7.01. So all query variables match with
a variable in the SQL select statement.
Anyone have any Ideas??
Thanks,
Daniel

Thank you very much for help.
The "Unknown column name " is a field still used in my
report, so I can't remove it.
After I clear the query in the report and reopen the report
and apply the same query back to it, I get different error message:
Element TASKNUM is undefined in QUERY.
The error occurred in : line 1
-1 : Unable to display error's location in a CFML template.
I know for sure this "Element TASKNUM is undefined in QUERY."
is defined in query. each time it complains something different. I
get really confused.
Thanks again.
Yueming

FSG report output does not show column headers (XML Publisher)

Hi everyone
Iam required to create a template for an FSG report with 20 columns. Used copy of FSG:Fixed number of columns Template(FSGTEMP) to create the template because i need to do some conditional formatting(need to show negative values in red color).
here is the problem:
when i use the template and run the program the output i can see the row data but not the column headers..column headings are blank!
regarding the conditional formatting, can anybody tell me how to give the condition
iam able to give the condition for oracle reports but not for FSG reports as i dont see the column name in the 'data field' in conditional format
Regards
sam

Open the report in Edit Mode Click on the reports and in the properties section Uncheck the
Enable Document Cache Property and your issue should be resolved.

EBS: Email XML publisher output, from After Report Trigger in Data Template

Here is what I'm trying to do:
-- In EBS (11.5.10 CU2), I'm using XML publisher (5.6.2) data template and layout template to generate Output files (PDF, EXCEL etc)
--In the Data Template's AfterReport Trigger, I'm using the Concurrent Request Id to locate the Output file name and trying to Email that output file.
Problem:
-- When the AfterReport trigger code is executed, the code is NOT seeing the output file and hence the file is NOT emailed.
Observations/Questions:
-- From what I observe, the Output Post Processor ( that generates the Excel / PDF files) is running AFTER the code in AfterReport trigger... and hence the AfterReport trigger is Not quite seeing / able to access the output file.
So, the sequence of execution seems to be:
-- Before Report Trigger
-- Data Query (SQL statement)
-- After Report Trigger
-- Output Post Processor
Because the AfterReport Trigger is running before the Output Post Processor, it is Not able to see the output file. Is that a True statement?
If Yes, how else can the DataTemplate access the Output file?
If No, what could cause the AfterReport trigger to not see the output file?

Because the AfterReport Trigger is running before the Output Post Processor, it is Not able to see the output file. Is that a True statement?
I believe so, as the OPP works on the output of the Report after the Report has completed execution.
You could use the same approach as we do for bursting the report to different users. Write a Java Concurrent program based on "oracle.apps.xdo.oa.cp. XMLPReportBurst" with delivery channel Email to send the email output. You would need to add code to launch the Concurrent child request in your AfterReport Trigger:
function AfterReport return boolean is
jreq_id number;
begin
srw.message (100, 'DEBUG: AfterReport_Trigger +');
jreq_id:= FND_REQUEST.SUBMIT_REQUEST ('XDO','XDOBURST','','',FALSE,:P_CONC_REQUEST_ID,'Y',chr(0),
If (jreq_id=0)
then
srw.message (100,'Request id is zero');
end if;

Interactive Report filtering with hidden item column names

I have created an Interactive Report and changed some of the default column headings by using hidden Items with appropriate title. However, when I look at the filter option in the "Gear" drop-down, the only column names which appear are the default ones. There are blank lines for the columns using hidden Items. Any suggestions for having the hidden item content appear in the filter column name list?
Thanks,
George

George,
What is it you're actually trying to do here? Maybe there's an easier way?
Hidden items aren't going to show up in the Column List.
I'm guessing you're trying to separate a long list of column names using '----------' or something like that? We're looking to do just that in our application, but obviously we don't want to users selecting these dummy entries. We tried using the IR column groups, but those make the list look even more cluttered IMHO. (Plus setting the sort order w/in the groups doesn't seem to affect the drop-down column lists, which seems counter-intuitive to me).
If anyone has other suggestions for breaking up the column list display, I could use something immediately (going into beta-test in 2 weeks!).
Thanks,
Stew

Crystal Report - NULL values mapped to Column names in reports

Hai,
I am using rows of data retrived from the SQL Server 2005 Express and sometimes the column names are NULL , I want to set a default value to this NULL value and set it as Data axes label / Group axes values, can some one please help me with this issue.
Thank you in advance.
Vijay

I resolved this issue myself, this can be set as other Data Labels, Group Label or Series Riser's properties too, left-click twice until the blank item is selected and then right click and select "Edit Axis Label" item and here it can edited with the new value(text).

Combining report Output of 2 Reports

Is it possible to run a report in which we run another report and i get the combined output as 1 PDF or html file.
I have sections of report which can run seperately and also those output of sections can be taken together and thus needs to be shown combined to 1 file.
Sudhanshu
null

hello,
if there are not more than 3 reports you can use the three sections of a report to create three different reports within one report-definition. when you run the report, it will create the output in a single file.
unfortunatly there is no way to combine the output of different reports into one single file.
regars,
the oracle reports team

Displaying report that contain sub report

iam using main report that has sub report but when displaying the main report in crystal report viewer the section of the sub report is shiffted to the right.
what can i do?
Best Regards,
Rabab

David,
The easiest way to do this would be to build a query in Access that provides this for you. You can do it easily using a two query approach.
QueryNo1:
SELECT
TransactionTable.TransactionID
FROM TransactionTable
WHERE TransactionTable.Price < 0 OR TransactionTable.Quantity < 0
QueryNo2:
SELECT *
FROM TransactionTable
WHERE TransactionTable.TransactionID IN [QueryNo1.TransactionID]
This will give you all of the TransactionID's that have a negative transaction associated with it.
Once you have the query completed to your satisfaction and saved, you can use it as your data source in CR. CR will see it as a View. If you make it a parameter query, CR will see it as a Stored Procedure.
Hope this helps,
Jason

Mailing the Report Output-Does not generating file name

Dear Gurus,
       The below program fulfils the "mailing the report" requirement .it sends the out put as an attachment in XLS format.But one problem exists i.e.,it does not generate filename.It gives the filename as ".XLS"(DOT XLS).
What should be done that system generates a filename?
*& Report ZTESTMAIL                                                   *
REPORT ZTESTMAIL                               .
tables: ekko.
parameters: p_email type somlreci1-receiver.
types: begin of t_ekpo,
ebeln type ekpo-ebeln,
ebelp type ekpo-ebelp,
aedat type ekpo-aedat,
matnr type ekpo-matnr,
end of t_ekpo.
data: it_ekpo type standard table of t_ekpo initial size 0,
wa_ekpo type t_ekpo.
types: begin of t_charekpo,
ebeln(10) type c,
ebelp(5) type c,
aedat(8) type c,
matnr(18) type c,
end of t_charekpo.
data: wa_charekpo type t_charekpo.
data: it_message type standard table of solisti1 initial size 0
with header line.
data: it_attach type standard table of solisti1 initial size 0
with header line.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1,
gd_error type sy-subrc,
gd_reciever type sy-subrc.
t_object_header = 'Text.xls'. append t_object_header.
*START_OF_SELECTION
start-of-selection.
Retrieve sample data from table ekpo
perform data_retrieval.
Populate table with detaisl to be entered into .xls file
perform build_xls_data_table.
*END-OF-SELECTION
end-of-selection.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'XLS'
'PO'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp aedat matnr
up to 10 rows
from ekpo
into table it_ekpo.
endform. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
form build_xls_data_table.
*CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
*con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>horizontal_tab,
con_cret type c value cl_abap_char_utilities=>cr_lf.
concatenate 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
into it_attach separated by con_tab.
concatenate con_cret it_attach into it_attach.
append it_attach.
loop at it_ekpo into wa_charekpo.
concatenate wa_charekpo-ebeln wa_charekpo-ebelp
wa_charekpo-aedat wa_charekpo-matnr
into it_attach separated by con_tab.
concatenate con_cret it_attach into it_attach.
append it_attach.
endloop.
endform. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
data: ld_error type sy-subrc,
ld_reciever type sy-subrc,
ld_mtitle like sodocchgi1-obj_descr,
ld_email like somlreci1-receiver,
ld_format type so_obj_tp ,
ld_attdescription type so_obj_nam ,
ld_attfilename type so_obj_des ,
ld_sender_address like soextreci1-receiver,
ld_sender_address_type like soextreci1-adr_typ,
ld_receiver like sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
clear w_doc_data.
read table it_attach index w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + strlen( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
clear t_attachment.
refresh t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
clear t_packing_list.
refresh t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
describe table it_message lines t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
append t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
describe table t_attachment lines t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
append t_packing_list.
Add the recipients email address
clear t_receivers.
refresh t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
append t_receivers.
call function 'SO_DOCUMENT_SEND_API1'
exporting
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
importing
sent_to_all = w_sent_all
tables
object_header = t_object_header
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
loop at t_receivers.
ld_receiver = t_receivers-retrn_code.
endloop.
endform.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
refresh it_message.
it_message = 'Please find attached a list test ekpo records'.
append it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODY
Your suggestions will be appreciated and rewarded.
Thanks in advance
Murali

Hi
Your pgm is not passing anything in obj_descr in packing list for excel file. If you pass a name your excel file will have that.
Regards
Sathar
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'XLS'
'PO'
' ' *------> no value*
changing gd_error
gd_reciever.
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription *----> no value*
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
t_packing_list-obj_descr = ld_attdescription.

Report output order by formula column value? pls.urgent

hi.
i have one query select empno,ename, sal from emp. in report layout i created a formula column named as net_sal(in which am doing some calculation based on some criteria). now i want to print the report order by net_sal desc.
how can i solve it? since the calculation is being done on runtime only/
pls. help me. urgent

Puedes hacer lo sigte.:
En el SQL QUERY STAMENT
select empno, ename, sal, :net_sal
from emp
order by 4 asc/desc

How to refer a column name in form report

Hi,
How can i refer a column name in the form report. My issue is that " I have a form report in that i have column name when i use to click the column name it should bring me to next page with the corresponding values of the column."
Here i have achieved that when i click on column name(in Page1) it brings me to next page(Page2). but in the next page(P2) i want to display(only display) the corresponding values of the selected column(Page1) but the values should not be editable and should not be in text field it should be in display only field.
So how can i write a sql query in display only souce field. Ie, how can i refer the column name in(page1) form report.

Hi Karthik
Very good morning.
I think u have column link in the first page and when u select a data in the first page and when u r moving to the next page the the corresponding data need to there is it correct.
For example You have table Employee and u have a select list in the first page contains name of the employee when u select one name and corresponding datas of the employee need to be in the second page.
So Dont clear the cache of the first page.
I the next page make the page items as display only and give the source of the all items a returning the single sql query.
If u have four items in the next page namely p2_sal, P2emp_no etc..
Then use like this
select sal from emp where emp_name=:P1_EMPNAME
Hopes this might helps you.
Thanks & Regards
Srikkanth.M

Webi Report Output using dynamic Filter

Suppose my report output contains doc. number & document date which shows data of one year which filter is applied on global level means at query filters level.
Now I want to show output of only last 3 months from current date(report run date) on the basis of document date.
So how to proceed further in such scenario.
Please reply ASAP.
Thanks
Pradip

You can filter it on the report level or the block level. Highlight either one and then add the filter (make sure the filter window is open).
Thanks

ALV Report to KSB1 Report-- KSB1 Report outputs in Non-ALV Format

Hi Gurus,
I am calling KSB1 from report ALV output.
After execution of KSB1, Report outputs in Classical report format.
While I execute KSB1 manually it shows in ALV Report.
From my report how to retain output of KSB1 in ALV Format.
Thanks in advance.

Add some lines to BDC to force ALV display, like
perform bdc_dynpro      using 'RKAEP000' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'KOSTL-LOW'.
* Call the option
perform bdc_field       using 'BDC_OKCODE'
                              '=UCSS'.
* Force grid
perform bdc_dynpro      using 'SAPLKAE2' '0200'.
perform bdc_field       using 'BDC_CURSOR'
                              'KAEP_SETT-MAXSEL'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'KAEP_SETT-USEGRD'
                              record-USEGRD_004.
perform bdc_field       using 'KAEP_SETT-MAXSEL'
                              record-MAXSEL_005.
* back to initial screen
perform bdc_dynpro      using 'RKAEP000' '0100'.
Regards,
Raymond

Specify the title of browser window showing report output

I am using DS 10g.
When the report output comes in the browser, then its title is not user friendly.
Can any body tell me how to specify the title of browser window that is displaying the report output.
The report output has been generated from form.

hello,
What DESFORMAT do you use ? (HTML ? HTMLCSS ? PDF ? RTF ? ...)
Regards

XML Report output contains no report column name in it...

Similar Messages

Maybe you are looking for